Stress-strain Analysis of Premolars With Non-carious Cervical Lesions: Influence of Restorative Material, Loading Direction and Mechanical Fatigue

Exploring access cavity through non-carious cervical lesions: Impacts on instrumentation, obturation, and fracture resistance in mandibular incisors

AIM

To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors.

METHODOLOGY

Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student's t-test, with a statistical significance level of 5%.

RESULTS

Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008).

CONCLUSIONS

CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

Effects of occlusal wear on 16-year progression of non-carious cervical lesions-Results of the study of health in Pomerania (SHIP-START)

BACKGROUND

It is still discussed whether occlusal wear (OW) affects the formation of non-carious cervical lesions (NCCLs).

OBJECTIVE

To estimate effects of OW on the presence and development of NCCLs, using 16-year follow-up data from a cohort study.

METHODS

Occlusal and cervical defects were measured in 728 cast models (one from the upper jaw and one from the lower jaw) of 364 participants. Adjusted mixed-effects ordinal logistic models analysing estimated cross-sectional (N = 1308 teeth/291 subjects) and longitudinal (N = 718 teeth/226 subjects) associations of OW with NCCLs using tooth level data.

RESULTS

OW size was cross-sectionally (OR = 1.74; 95% CI: 1.27-2.38 for OW size; OR = 0.97; 95% CI: 0.94-0.99 for squared OW size), but not longitudinally (OR = 1.14; 95% CI: 0.99-1.30) associated with odds of higher NCCL sizes. For cross-sectional analyses, predicted probabilities of an NCCL size of 0 decreased from about 0.996 to 0.010 for OW sizes of 0 to 25.

CONCLUSION

Results suggest an association between OW and NCCL size. However, as longitudinal results were non-significant, while consistent in direction, large-scaled cohort studies are demanded to more precisely estimate effect strength.

The Stresses and Deformations in the Abfraction Lesions of the Lower Premolars Studied by the Finite Element Analyses: Case Report and Review of Literature

BACKGROUND

The purpose of the study was to investigate the behavior of hard dental structures of the teeth with abfraction lesions when experimental occlusal loads were applied.

METHODS

A 65-year-old patient came to the dentist because she had painful sensitivity in the temporomandibular joints and the lower right premolars. The patient was examined, and cone-beam computed tomography (CBCT) of the orofacial area was indicated. The data provided from the CBCT were processed with Mimics Innovation Suite 17 software to create the desired anatomical area in 3D format. Then, the structural calculation module was used in order to perform a finite element analysis of the lower right premolar teeth. A focused review of articles published between 2014 and 2023 from specialty literature regarding the FEA of premolars with abfraction lesions was also conducted.

RESULTS

The parcel area and the cervical third of the analyzed premolars proved to be the most vulnerable areas under the inclined direction of occlusal loads. The inclined application of experimental loads induced 3-4 times higher maximum shears, stresses, and deformations than the axial application of the same forces.

CONCLUSIONS

FEA can be used to identify structural deficiencies in teeth with abfractions, a fact that is particularly important during dental treatments to correct occlusal imbalances.

Investigating the etiology of non-carious cervical lesions: Novel µCT analysis

OBJECTIVES

The etiology of non-carious cervical lesions (NCCLs) is not fully understood, limiting treatment and prevention. Our aim was to evaluate the effect of mechanical loading and acid exposure on the cervical tooth region using a random spectrum loading model that simulates the nature of oral mastication.

METHODS

Thirty extracted human premolars were divided into three experimental groups: 1) unloaded teeth immersed in acid (erosion group: Er), 2) loaded teeth immersed in acid (erosion with spectrum loading group: Er-SL), and 3) loaded teeth immersed in distilled water (spectrum loading group: SL). Random spectrum loading with loads ranging from 100 to 500 N was performed. All teeth were scanned using micro-CT. A novel 3D analysis was developed to evaluate the circumferential cervical tissue loss and regions under tension and compression. For parametric and non-parametric comparisons, one-way ANOVA with Tukey post-hoc tests and Kruskal-Wallis with Bonferroni post-hoc tests were used.

RESULTS

A significant difference was observed in the circumferential volumetric loss, with the Er-SL exhibiting the greatest volume loss (p < 0.001). Moreover, in the loaded groups (Er-SL and SL), regions subjected to tension showed significantly greater loss (p < 0.001, p = 0.007) compared with regions subjected to compression.

CONCLUSIONS

The novel high-resolution micro-CT analysis provided new insights into the etiology of NCCLs. The results suggested that the cumulative effect of mechanical loading and acid exposure may play a major role in NCCL formation.

CLINICAL SIGNIFICANCE

This study investigates the etiology of NCCLs by examining the combined effects of occlusal loads and acid exposure on cervical tissue loss. Understanding the pathogenesis of NCCLs paves the way for the development of improved preventative measures and treatment strategies to prevent tooth structure degradation.

Stereomicroscopic Aspects of Non-Carious Cervical Lesions

Non-carious cervical lesions (NCCLs) represent a form of tooth wear, characterized by the irreversible loss of dental hard tissues at the enamel-cement junction, without the involvement of caries and dental trauma. The aim of this study was to highlight the morphological elements of NCCLs via their stereomicroscopic examination and to confirm the role of this examination in the diagnosis of early lesions. In addition, the association between the morphological aspects identified during the stereomicroscopic examination of NCCLs and their etiological factors was determined. For this study, extracted teeth with NCCLs were examined with a stereomicroscope. The morphological aspects of NCCLs were evaluated at magnifications up to 75×. In wedge-shaped NCCLs, the stereomicroscopic examination allowed the identification and measurement of scratches, furrows and cracks. In saucer-shaped NCCLs, the stereomicroscopic examination highlighted the smooth appearance of the walls. The presented study highlighted the role of stereomicroscopic examination in the assessment of NCCL morphology and in their early diagnosis. The study confirmed, in particular, the role of occlusal overloads and tooth brushing in determining the morphology of NCCLs.

Stronger than Ever: Multifilament Fiberglass Posts Boost Maxillary Premolar Fracture Resistance

This paper investigates the influence of cavity configuration and post-endodontic restoration on the fracture resistance, failure mode and stress distribution of premolars by using a method of fracture failure test and finite elements analysis (FEA) coupled to Weibull analysis (WA). One hundred premolars were divided into one control group (G_contr) (n = 10) and three experimental groups, according to the post-endodontic restoration (n = 30), G₁, restored using composite, G₂, restored using single fiber post and G₃, restored using multifilament fiberglass posts (m-FGP) without post-space preparation. Each experimental group was divided into three subgroups according to the type of coronal cavity configuration (n = 10): G_1O, G_2O, and G_3O with occlusal (O) cavity configuration; G_1MO, G_2MO, and G_3MO with mesio-occlusal (MO); and G_1MOD, G_2MOD, and G_3MOD with mesio-occluso-distal (MOD). After thermomechanical aging, all the specimens were tested under compression load, and failure mode was determined. FEA and WA supplemented destructive tests. Data were statistically analyzed. Irrespective of residual tooth substance, G₁ and G₂ exhibited lower fracture resistance than G_contr (p < 0.05), whereas G₃ showed no difference compared to G_contr (p > 0.05). Regarding the type of restoration, no difference was highlighted between G_1O and G_2O, G_1MO and G_2MO, or G_1MOD and G_2MOD (p > 0.05), whereas G_3O, G_3MO, and G_3MOD exhibit higher fracture resistance (p < 0.05) than G_1O and G_2O, G_1MO and G_2MO, and G_1MOD and G_2MOD, respectively. Regarding cavity configuration: in G₁ and G_2, G_1O and G_2O exhibited higher fracture resistance than G_1MOD and G_2MOD, respectively (p < 0.05). In G₃, there was no difference among G_3O, G_3MO and G_3MOD (p > 0.05). No difference was found among the different groups and subgroups regarding the failure mode. After aging, premolars restored with multifilament fiberglass posts demonstrated fracture resistance values comparable to those of an intact tooth, irrespective of the different type of cavity configuration.

Noncarious cervical lesions: Morphology and progression, prevalence, etiology, pathophysiology, and clinical guidelines for restoration

PURPOSE

To synthesize the literature regarding noncarious cervical lesions (NCCLs) and propose clinical guidelines when lesion restoration is indicated.

MATERIAL AND METHODS

A PubMed search was performed related to NCCL morphology, progression, prevalence, etiology, pathophysiology, and restoration.

RESULTS

NCCLs form as either rounded (saucerlike) depressions with smooth, featureless surfaces that progress mainly in height or as V-shaped indentations that increase in both height and depth. Prevalence ranges from less than 10% to over 90% and increases with age. Common locations are the facial surfaces of maxillary premolars. They have a multifactorial etiology due to personal habits such as excessive horizontal toothbrushing and consumption of acidic foods and drinks. Occlusal factors have been identified as contributing to the prevalence of NCCLs in some studies, whereas other studies indicate there is no relationship. The concept of abfraction has been proposed whereby mechanical stress from occlusal loading plays a role in the development and progression of NCCLs with publications supporting the concept and others indicating it lacks the required clinical documentation. Regardless of the development mechanism, demineralization occurs and they are one of the most common demineralization diseases in the body. Treatment should be managed conservatively through preventive intervention with restorative treatment delayed until it becomes necessary due to factors such as lesion progression, impact on patient's quality of life, sensitivity, poor esthetics, and food collection may necessitate restoration. Composite resins are commonly used to restore NCCLs although other materials such as glass ionomer and resin-modified glass ionomer are also used. Sclerotic dentin does not etch like normal dentin and therefore it has been recommended to texture the dentin surface with a fine rotary diamond instrument to improve restoration retention. Some clinicians use mechanical retention to increase retention. Beveling of enamel is used to increase the bonding area and retention as well as enhance the esthetic result by gradually creating a color change between the restoration and tooth. Both multistep and single-step adhesives have been used. Dentin etching should be increased to 30 seconds due to the sclerotic dentin with the adhesive agent applied using a light scrubbing motion for 20 seconds but without excessive force that induces substantial bending of a disposable applicator. Both flowable and sculptable composite resins have been successfully used with some clinicians applying and polymerizing a layer of flowable composite resin and then adding an external layer of sculptable composite resin to provide enhanced resistance to wear. When caries is present, silver diamine fluoride has been used to arrest the caries rather than restore the lesion.

CONCLUSIONS

Noncarious cervical lesions (NCCLs) form as smooth saucerlike depressions or as V-shaped notches. Prevalence values as high as 90% and as low as 10% have been reported due to habits such as excessive toothbrushing and an acidic diet. Occlusal factors have been proposed as contributing to their presence but it remains controversial. Publications have both supported and challenged the concept of abfraction. They are one of the most common demineralization diseases in the body. Conservative treatment through prevention is recommended with restorative treatment delayed as long as possible. When treatment is needed, composite resins are commonly used with proposed restorative guidelines including texturing the sclerotic dentin, beveling the enamel, potential use of mechanical retention, 30 seconds of acid etching, and use of either multistep or single-step adhesives in conjunction with a light scrubbing motion for 20 seconds without excessive force placed on disposable applicators.

A composite resin core with a new zirconia tube reduces the surface strain at the cervical area of a mandibular molar: A model tooth study

PURPOSE

This study aimed to evaluate the surface strain at the cervical area of endodontically treated molars with a large pulp chamber restored using a composite resin core with three different types of core build-up systems.

METHODS

Reproduction models of human mandibular molars with prepared post spaces were used in this study. Roots duplicated with a composite resin were used as the experimental teeth. Three types of core build-up systems were used: composite resin core(RC), composite resin core with fiber posts (FC), and composite resin core with a prefabricated zirconia tube (ZC). Each group comprised eight specimens. Crowns made of yttria partially stabilized zirconia were cemented with dual-cure resin cement. Four strain gauges were attached to the surfaces of each specimen: the cervical area of the root and crown, on the buccal and lingual sides. The surface strain at each cervical area was measured using a static loading test and statistically analyzed.

RESULTS

In the case of static loading to the buccal cusp inner slope, ZC showed a significantly lower strain than RC in the crown on the buccal side and in the root and FC in the root. In the central fossa, ZC showed a significantly lower strain than FC in the root on the lingual side.

CONCLUSIONS

The prefabricated zirconia tube reduced the surface strain at the cervical area of the buccal/lingual root in molars; however, the effect was small in the cervical area of the crown.

Effect of partial restorative treatment on stress distributions in non-carious cervical lesions: a three-dimensional finite element analysis

BACKGROUND

Partial restoration combined with periodontal root coverage surgery can be applied to the treatment of non-carious cervical lesions (NCCLs) accompanied with gingival recessions in clinical practice. However, the feasibility of NCCL partial restorative treatment from a biomechanical perspective remains unclear. This study aimed to investigate the effect of partial restorations on stress distributions in the NCCLs of mandibular first premolars via three-dimensional finite element analysis.

METHODS

Three-dimensional finite element models of buccal wedge-shaped NCCLs in various locations of a defected zenith (0 mm, 1 mm, and 2 mm) were constructed and divided into three groups (A, B, and C). Three partially restored NCCL models with different locations of the lower restoration border (1 mm, 1.5 mm, and 2 mm), and one completely restored NCCL model were further constructed for each group. The following restorative materials were used in all restoration models: composite resin (CR), glass-ionomer cement (GIC), and mineral trioxide aggregate (MTA). The first principal stress distributions under buccal oblique loads of 100 N were analyzed. Restoration bond failures were also evaluated based on stress distributions at dentin-restoration interfaces.

RESULTS

When the partial restoration fully covered the defected zenith, the first principal stress around the zenith decreased and the maximum tensile stress was concentrated at the lower restoration border. When the partial restoration did not cover the defected zenith, the first principal stress distribution patterns were similar to those in unrestored models, with the maximum tensile stress remaining concentrated at the zenith. As the elastic modulus of the restorative material was altered, the stress distributions at the interface were not obviously changed. Restoration bond failures were not observed in CR, but occurred in GIC and MTA in most models.

CONCLUSIONS

Partial restorations that fully covered defected zeniths improved the stress distributions in NCCLs, while the stress distributions were unchanged or worsened under other circumstances. CR was the optimal material for partial restorations compared to GIC and MTA.

Numerical Modeling of a New Type of Prosthetic Restoration for Non-Carious Cervical Lesions

The paper considers a new technology for the treatment of non-carious cervical lesions (NCCLs). The three parameterized numerical models of teeth are constructed: without defect, with a V-shaped defect, and after treatment. A new treatment for NCCL has been proposed. Tooth tissues near the NCCLs are subject to degradation. The main idea of the technology is to increase the cavity for the restoration of NCCLs with removal of the affected tissues. The new treatment method also allows the creation of a playground for attaching the gingival margin. The impact of three biomaterials as restorations is studied: CEREC Blocs; Herculite XRV; and Charisma. The models are deformed by a vertical load from the antagonist tooth from 100 to 1000 N. The tooth-inlay system is considered, taking into account the contact interaction. Qualitative patterns of tooth deformation before and after restoration were established for three variants of the inlay material.

NaOCl Application after Acid Etching and Retention of Cervical Restorations: A 3-Year Randomized Clinical Trial

This study evaluated the retention of composite resin restorations in noncarious cervical lesions (NCCLs) performed with or without pretreatment with 10% NaOCl solution (deproteinization). A randomized, controlled, split-mouth, doubleblinded trial was carried out. Thirty patients with at least two NCCLs were included in the study. The NCCLs were randomly allocated into two treatment groups: control (acid etching with 37% phosphoric acid + placebo solution + Adper Single Bond 2/3M Oral Care + Filtek Z350/3M Oral Care) or experimental group (acid etching with 37% phosphoric acid + 10% NaOCl solution + Adper Single Bond 2 + Filtek Z350). A calibrated examiner evaluated the restorations at baseline (1 week) and recalls (6, 12, 24, and 36 months) using the FDI criteria. The primary outcome evaluated was retention of the restorations. Data were analyzed by the Kaplan-Meier method and the log-rank test (α=0.05). After 3 years, 64 restorations were evaluated in 23 patients. The annual failure rate was 9% for the control group and 17.8% for the experimental group (deproteinization technique). Considering the failures and their distribution among the characteristics of the patients and NCCLs, no statistically significant differences were observed for the control and experimental treatment groups (p=0.077) or the number of teeth in the mouth (p=0.320). Restorations in the mandible (p=0.039) and premolars (p=0.013) showed significantly lower clinical survival rates. The deproteinization pretreatment with a 10% NaOCl solution did not promote additional retention of restorations in NCCLs. (clinicaltrials. gov: NCT03086720).

A Retrospective Clinical Study on Factors Influencing the Failure of NCCL Restorations

Objectives

This retrospective study evaluated the factors influencing the clinical failure of noncarious cervical lesion (NCCL) restorations.

Methods

Patients were routinely treated by undergraduate or postgraduate students and randomly received a clinical recall evaluation. A retrospective study was performed with two experienced calibrated examiners to evaluate NCCL restorations, including the critical parameters of retention, caries, marginal discoloration, and marginal integrity. The factors related to the restoration included gender, age, arch site, tooth position, the presence of occlusal wear facets, caries risk, operator, adhesive strategy, and composite. The clinical failure comparison between the parameters and factors was performed using the binary logistic regression analysis.

Results

A total of 460 cervical restorations from 96 patients were evaluated. The adhesive strategy and the presence of occlusal wear facets were the most important factors influencing the parameter failure. Therefore, the highest failure was marginal integrity, in which the gingival marginal integrity failure was 50.7%, and the occlusal marginal integrity failure was 42.4%.

Conclusions

The main factors influencing clinical failure for partial loss, marginal discoloration, and marginal integrity were the adhesive strategy and the presence of occlusal wear facets. Therefore, marginal integrity was the most frequent failure parameter.

The Influence of Different Occlusal Loading on Six Restorative Materials for Restoration of Abfraction Lesions-Finite Element Analysis

Objectives  The aim of the study was to analyze the occurrence of stress on teeth with abfraction lesions restored with six different restorative materials, and by introducing the tensile strength parameters to calculate the safety factor of the material under the load (ratio between the strength of the material and the maximum stress).

Materials and Methods  Three-dimensional models of the mandibular premolar are created from a microcomputed tomography images. An abfraction lesion is modeled on the tooth. The stress of the dental tissues and six restorative materials under functional and nonfunctional occlusal loading of 200 (N) are analyzed by finite element method.

Statistical Analysis  CTAn program 1.10 and ANSYS Workbench (version 14.0) were used for analysis. Results are presented in von Mises stress.

Results  Oblique loads caused ≈ four times higher stress in restorative materials than the axial ones. It is noticeable that high values of von Mises stress are measured at the bottom of the sharp lesion, even up to 240 MPa, that are significantly reduced after the restoration. The highest stresses at the restorative material are present at the lower (gingival) margin of the restoration. The highest stresses under both types of loads are measured in nanohybrid composite (Tetric EvoCeram, Ivoclar Vivadent). The lowest values of the stress are measured in the flowable composite (Tetric Flow, Ivoclar Vivadent), but at the same time, the highest value of the stress is measured in the surrounding dental tissues on the tooth restored with the flowable composite. The microhybrid composite (Herculite XR, Kerr), with the highest safety factor, is the material that best withstands the stresses it is exposed to. The obtained safety factor did not exceed the critical limit, except for the glass ionomer cement, with the safety factor lower than 1.

Conclusion  The type of tooth loading has the greatest influence on the intensity of stress. The value of the obtained stresses in the restorative material and dental tissues differ due to the different mechanical properties of the materials. Restoration of noncarious lesions significantly reduces extremely high stress values at their bottom.

Dental Restorative Materials for Elderly Populations

The incidence of dental caries, especially root caries, has risen in elderly populations in recent years. Specialized restorative materials are needed due to the specific site of root caries and the age-related changes in general and oral health in the elderly. Unfortunately, the restorative materials commonly used clinically cannot fully meet the requirements in this population. Specifically, the antibacterial, adhesive, remineralization, mechanical, and anti-aging properties of the materials need to be significantly improved for dental caries in the elderly. This review mainly discusses the strengths and weaknesses of currently available materials, including amalgam, glass ionomer cement, and light-cured composite resin, for root caries. It also reviews the studies on novel anti-caries materials divided into three groups, antimicrobial, remineralization, and self-healing materials, and explores their potential in the clinical use for caries in the elderly. Therefore, specific restorative materials for caries in the elderly, especially for root caries, need to be further developed and applied in clinical practice.

Validated Finite Element Models of Premolars: A Scoping Review

Finite element (FE) models are widely used to investigate the biomechanics of reconstructed premolars. However, parameter identification is a complex step because experimental validation cannot always be conducted. The aim of this study was to collect the experimentally validated FE models of premolars, extract their parameters, and discuss trends. A systematic review was performed following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Records were identified in three electronic databases (MEDLINE [PubMed], Scopus, The Cochrane Library) by two independent reviewers. Twenty-seven parameters dealing with failure criteria, model construction, material laws, boundary conditions, and model validation were extracted from the included articles. From 1306 records, 214 were selected for eligibility and entirely read. Among them, 19 studies were included. A heterogeneity was observed for several parameters associated with failure criteria and model construction. Elasticity, linearity, and isotropy were more often chosen for dental and periodontal tissues with a Young’s modulus mostly set at 18–18.6 GPa for dentine. Loading was mainly simulated by an axial force, and FE models were mostly validated by in vitro tests evaluating tooth strains, but different conditions about experiment type, sample size, and tooth status (intact or restored) were reported. In conclusion, material laws identified herein could be applied to future premolar FE models. However, further investigations such as sensitivity analysis are required for several parameters to clarify their indication.

Stress distribution in endodontically treated abfracted mandibular premolar restored with different cements and crowns: A three-dimensional finite element analysis

Context

Noncarious cervical lesions may penetrate the pulp and require root canal treatment followed by crown placement. Such teeth may be susceptible to fracture, especially at the cervical area.

Aims

To estimate which combination of restorative material and crown resulted in homogenous stress-strain distribution of endodontically treated abfracted mandibular premolar using three-dimensional finite element model (FEM).

Settings and Design

A three-dimensional model of mandibular single-rooted premolar along with alveolar bone was created in finite element analysis (FEA) software preprocessor ANSYS rel 14.5 FEM software (ANSYS Inc., Houston, USA, 1994). Cervical lesion was created in the model with specific dimensions, 3 mm mesiodistally and 2 mm gingivoocclusally with enamel occlusal margin and dentin gingival margin.

Materials and Methods

Tooth was simulated to be root canal treated and restored with different types of cements and crowns followed by placing a static load of 300 N at an angle of 135°. Analysis was run and stress distribution pattern was studied.

Results

Cervical region of an endodontically treated tooth is subjected to stresses, irrespective of restorative material used. Porcelain fused to metal (PFM) crowns showed least strain values with different postendodontic, restorative materials.

Conclusions

FEA is a predictable and reproducible model to predict stress-strain behavior. PFM crowns with different postendodontic restorative materials showed least strain values in the cervical area of abfracted, endodontically treated premolars.