In vitro and in vivo comparison of five biomaterials used for orthopedic soft tissue augmentation

Mesenchymal Stem Cells and Regenerative Therapy with Bilateral Gracilis Flaps for Perineal Reconstruction of a Wound Infection in the Setting of Anal Squamous Cell Carcinoma

ABSTRACT

Many patients are affected by HIV/AIDS, and these conditions are highly prevalent worldwide. Patients with HIV/AIDS can experience debilitating wound infections that often require flap reconstruction and become challenging for surgeons to treat. In the past 5 years, mesenchymal stem cells have been tested and used as regenerative therapy to promote the growth of tissues throughout the body because of their ability to successfully promote cellular mitogenesis. To the authors' knowledge, the use of mesenchymal stem cell grafting following necrosis of a myocutaneous gracilis flap (as part of perineal wound reconstruction) has never been reported in the literature.In addition, the use of mesenchymal stem cells and regenerative medicine combined in the setting of squamous cell carcinoma of the anus with prior radiation (along with comorbid AIDS) has not been previously documented.In this report, the authors outline the case of a 60-year-old patient who had a recipient bed (perineum) complication from prior radiation therapy. Complicating the clinical picture, the patient also developed a Pseudomonal organ space infection of the pelvis leading to the failure of a vertical rectus abdominis myocutaneous flap and myocutaneous gracilis flaps. As a result, the patient underwent serial operative debridements for source control, with the application of mesenchymal stem cells, fetal bovine dermis, porcine urinary bladder xenograft, and other regenerative medicine products, achieving a highly successful clinical outcome. A procedural description for future use and replication of this method is provided.

Nanofiber Scaffolds by Electrospinning for Rotator Cuff Tissue Engineering

Rotator cuff tears continue to be at risk of retear or failure to heal after surgical repair, despite the use of various surgical techniques, which stimulate development of novel scaffolding strategies. They should be able to address the known causes of failure after the conventional rotator cuff repair: (1) failure to reproduce the normal tendon healing process, (2) resultant failure to reproduce four zones of the enthesis, and (3) failure to attain sufficient mechanical strength after repair. Nanofiber scaffolds are suited for this application because they can be engineered to mimic the ultrastructure and properties of the native rotator cuff tendon. Among various methods for tissue-engineered nanofibers, electrospinning has recently been highlighted in the rotator cuff field. Electrospinning can create fibrous and porous structures that resemble natural tendon's extracellular matrix. Other advantages include the ability to create relatively large surface-to-volume ratios, the ability to control fiber size from the micro to the nano scale, and the flexibility of material choices. In this review, we will discuss the anatomical and mechanical features of the rotator cuff tendon, their potential impacts on improper healing after repair, and the current knowledge of the use of electrospinning for rotator cuff tissue engineering.

Extracellular Matrix-Based Biomaterials and Their Influence Upon Cell Behavior

Biologic scaffold materials composed of allogeneic or xenogeneic extracellular matrix (ECM) are commonly used for the repair and remodeling of injured tissue. The clinical outcomes associated with implantation of ECM-based materials range from unacceptable to excellent. The variable clinical results are largely due to differences in the preparation of the material, including characteristics of the source tissue, the method and efficacy of decellularization, and post-decellularization processing steps. The mechanisms by which ECM scaffolds promote constructive tissue remodeling include mechanical support, degradation and release of bioactive molecules, recruitment and differentiation of endogenous stem/progenitor cells, and modulation of the immune response toward an anti-inflammatory phenotype. The methods of ECM preparation and the impact of these methods on the quality of the final product are described herein. Examples of favorable cellular responses of immune and stem cells associated with constructive tissue remodeling of ECM bioscaffolds are described.

Scaffolds in the management of massive rotator cuff tears: current concepts and literature review

Injuries to the rotator cuff (RC) are common and could alter shoulder kinematics leading to arthritis. Synthetic and biological scaffolds are increasingly being used to bridge gaps, augment RC repair and enhance healing potential. Our review evaluates the clinical applications, safety and outcome following the use of scaffolds in massive RC repair.

A search was performed using EBSCO-Hosted Medline, CINAHL, Cochrane and PubMed using various combinations of the keywords ‘rotator cuff’, ‘scaffold’, ‘biological scaffold’, ‘massive rotator cuff tear’ ‘superior capsular reconstruction’ and ‘synthetic scaffold’ between 1966 and April 2018. The studies that were most relevant to the research question were selected. All articles relevant to the subject were retrieved, and their bibliographies hand searched.

Synthetic, biosynthetic and biological scaffolds are increasingly being used for the repair/reconstruction of the rotator cuff. Allografts and synthetic grafts have revealed more promising biomechanical and early clinical results than xenografts. The retear rates and local inflammatory reactions were alarmingly high in earlier xenografts. However, this trend has reduced considerably with newer versions. Synthetic patches have shown lower retear rates and better functional outcome than xenografts and control groups.

The use of scaffolds in the treatment of rotator cuff tear continues to progress. Analysis of the current literature supports the use of allografts and synthetic grafts in the repair of massive cuff tears in reducing the retear rate and to provide good functional outcome. Though earlier xenografts have been fraught with complications, results from newer ones are promising. Prospective randomized controlled trials from independent centres are needed before widespread use can be recommended.

Cite this article: EFORT Open Rev 2019;4:557-566. DOI: 10.1302/2058-5241.4.180040

An Overview of Scaffold Design and Fabrication Technology for Engineered Knee Meniscus

Current surgical treatments for meniscal tears suffer from subsequent degeneration of knee joints, limited donor organs and inconsistent post-treatment results. Three clinical scaffolds (Menaflex CMI, Actifit® scaffold and NUsurface® Meniscus Implant) are available on the market, but additional data are needed to properly evaluate their safety and effectiveness. Thus, many scaffold-based research activities have been done to develop new materials, structures and fabrication technologies to mimic native meniscus for cell attachment and subsequent tissue development, and restore functionalities of injured meniscus for long-term effects. This study begins with a synopsis of relevant structural features of meniscus and goes on to describe the critical considerations. Promising advances made in the field of meniscal scaffolding technology, in terms of biocompatible materials, fabrication methods, structure design and their impact on mechanical and biological properties are discussed in detail. Among all the scaffolding technologies, additive manufacturing (AM) is very promising because of its ability to precisely control fiber diameter, orientation, and pore network micro-architecture to mimic the native meniscus microenvironment.

Bovine fetal collagen reinforcement in a small animal model of hernia with component repair

BACKGROUND

Component separation is a surgical strategy used to achieve abdominal wall reconstruction for patients with significant ventral hernias. With an increasing number of variations in procedural techniques and materials, the development of a small animal model of this surgery would allow for the controlled evaluation of variables with analytics not available in human clinical studies. To test this model, we investigated the reinforcement of these component repairs in rats with a bovine fetal collagen (BFC) scaffold.

METHODS

Fifty Sprague Dawley rats were randomized into either component repair alone or BFC reinforced component repair. At time points up to 1 y, these groups were evaluated for hernia formation, strength of repair, strength of mesh-muscle interface, and histology of the repair site.

RESULTS

Anterior component separation was achievable and reproducible in this small animal model. Significantly fewer hernias were found in BFC reinforced repairs. The change in transverse abdominal length was lower for reinforced repairs indicating less external oblique retraction, and reinforced repairs were consistently stronger than controls through 1 y. BFC was revascularized and repopulated with host cells but not rapidly degraded.

CONCLUSIONS

This small animal model of hernia repair with anterior component separation was effective in evaluating the reinforcement of a hernia repair with mesh. It may be useful in future work for the controlled, comparative investigation of different repair techniques and mesh materials in anterior component separation hernia repairs. Additionally, bovine fetal collagen was found to effectively reinforce component repairs and undergo an assimilation process including rapid revascularization and repopulation with host cells followed by gradual extracellular matrix remodeling.

Tissue engineering of the temporomandibular joint disc: current status and future trends

INTRODUCTION

Temporomandibular joint disorders are extremely prevalent and there is no ideal treatment clinically for the moment. For severe cases, a discectomy often need to be performed, which will further result in the development of osteoarthritis. In the past thirty years, tissue engineering has provided a promising approach for the effective remedy of severe TMJ disease through the creation of viable, effective, and biological functional implants.

METHODS

Although TMJ disc tissue engineering is still in early stage, unremitting efforts and some achievements have been made over the past decades. In this review, a comprehensive summary of the available literature on the progress and status in tissue engineering of the TMJ disc regarding cell sources, scaffolds, biochemical and biomechanical stimuli, and other prospects relative to this field is provided.

RESULTS AND CONCLUSIONS

Even though research studies in this field are too few compared to other fibrocartilage (e.g., knee meniscus) and numerous, difficult tasks still exist, we believe that our ultimate goal of regenerating a biological implant whose histological, biochemical, and biomechanical properties parallel native TMJ discs for clinical therapy will be achieved in the near future.

Scaffolds drive meniscus tissue engineering

The review focuses on the recent research trend on scaffold types and biomedical applications, and perspectives in meniscus tissue engineering.

Human fascia lata ECM scaffold augmented with immobilized hyaluronan: inflammatory response and remodeling in the canine body wall and shoulder implantation sites

We postulate that immobilization of tyramine-substituted hyaluronan (THA) into an extracellular matrix (ECM) scaffold may be a strategy to promote an anti-inflammatory response to the ECM. Further, we posit that the implantation site could influence the inflammatory response and remodeling of an ECM scaffold. Eight beagles underwent implantation of fascia ECM grafts, treated with either immobilized low molecular weight (57 kDa) THA or water only, in both the shoulder injury and body wall sites. Dogs were euthanized at 12 weeks and fascia grafts harvested en bloc for histology. Grafts implanted at the body wall had significantly higher inflammatory cell infiltrate and vascularity, and significantly lower retardance (collagen density), than grafts at the shoulder, suggestive of a more intense, persistent, and perhaps degradative inflammatory and remodeling response at the body wall than shoulder injury site in the canine model. However, the presence of immobilized low MW THA had no effect on the inflammation response or remodeling of fascia ECM compared to water-treated controls. Importantly, these results suggest that the inflammatory response and remodeling of biomaterial implants depends on the location of implantation and therefore our animal models need to be carefully chosen. Further, the potential anti-inflammatory advantages of hyaluronan (HA) in wound healing do not appear to be realized when presenting it to the host as non-degradable hydrogel even if its capacity for binding HA binding protein is maintained. Further study treating ECM with uncross-linked (free) HA or immobilized low MW THA as a means to deliver free HA or other biomolecules to a surgical repair site is warranted.

Characterization of the Mechanical Strength, Resorption Properties, and Histologic Characteristics of a Fully Absorbable Material (Poly-4-hydroxybutyrate-PHASIX Mesh) in a Porcine Model of Hernia Repair

Purpose. Poly-4-hydroxybutyrate (P4HB) is a naturally derived, absorbable polymer. P4HB has been manufactured into PHASIX Mesh and P4HB Plug designs for soft tissue repair. The objective of this study was to evaluate mechanical strength, resorption properties, and histologic characteristics in a porcine model. Methods. Bilateral defects were created in the abdominal wall of n = 20 Yucatan minipigs and repaired in a bridged fashion with PHASIX Mesh or P4HB Plug fixated with SorbaFix or permanent suture, respectively. Mechanical strength, resorption properties, and histologic characteristics were evaluated at 6, 12, 26, and 52 weeks (n = 5 each). Results. PHASIX Mesh and P4HB Plug repairs exhibited similar burst strength, stiffness, and molecular weight at all time points, with no significant differences detected between the two devices (P > 0.05). PHASIX Mesh and P4HB Plug repairs also demonstrated significantly greater burst strength and stiffness than native abdominal wall at all time points (P < 0.05), and material resorption increased significantly over time (P < 0.001). Inflammatory infiltrates were mononuclear, and both devices exhibited mild to moderate granulation tissue/vascularization. Conclusions. PHASIX Mesh and P4HB Plug demonstrated significant mechanical strength compared to native abdominal wall, despite significant material resorption over time. Histological assessment revealed a comparable mild inflammatory response and mild to moderate granulation tissue/vascularization.

Host response to xenograft ECM implantation is not different between the shoulder and body wall sites in the rat model

In the context of tendon and ligament repair, mechanical loading and the presence of joint synovial fluid are known to profoundly influence the form and function of the repair tissue and potentially the host response to biomaterials. Previously, we demonstrated that a xenograft extra cellular matrix (ECM) scaffold implanted in the rat shoulder elicited a unique host response from that seen in the body wall. However, the host response to xenografts implanted in shoulders with a tendon/capsule injury was not different from xenografts implanted in shoulders with no injury. In the current study, we hypothesized that varying clinically relevant surgical and environmental factors would introduce significant differences in host response to xenograft implantation at the shoulder. Contrary to our hypothesis, we found no significant differences in host response between any shoulder implantation conditions or between shoulder and body wall implantation in the rat model. These findings suggest that there is no advantage to using an orthotopic shoulder model to investigate the host response to rotator cuff scaffold materials in the rat model, and due to the insensitivity of its host response to various clinically relevant surgical conditions, may suggest that the rat does not provide a surrogate for directly translating the host response to biomaterials to the human application.

Acellular fetal bovine dermal matrix in the treatment of nonhealing wounds in patients with complex comorbidities

BACKGROUND

In contrast to the narrow indications for living skin equivalents, extracellular matrix biomaterials are clinically used in a wide range of wound-healing applications. Given the breadth of possible uses, the goal of this study was to retrospectively compile and analyze the clinical application and effectiveness of an extracellular matrix biomaterial derived from fetal bovine dermis (PriMatrix; TEI Biosciences, Boston, Massachusetts) in patients treated by a single physician and monitored postsurgically in an outpatient wound care center.

METHODS

A retrospective medical record review was conducted of consecutive patients treated from January 2007 through January 2009 with meshed PriMatrix after sharp/surgical debridement and coverage with standard moist wound therapy dressings.

RESULTS

Twenty-nine patients and 34 wounds were compiled. All of the wounds were unresponsive to conservative treatment owing to complications, including infection, exposed bone or tendon, and other comorbidities known to delay healing. Wounds included 11 diabetic ulcers, 8 venous stasis ulcers, 10 nonhealing traumatic wounds, and 5 other chronic wounds. Thirty of 34 wounds healed, with four patients lost to follow-up. Mean time to healing for diabetic foot ulcers was 105 days with an average of 2.6 PriMatrix applications. Mean time to healing for venous, traumatic, and other chronic wounds was 74 to 82 days with an average of 1.2 to 1.4 PriMatrix applications.

CONCLUSIONS

In patients with comorbidities known to delay healing, the implantation of PriMatrix promoted the healing and, ultimately, full reepithelialization of otherwise unresponsive wounds of varied etiology, including those with complications of infection or exposed bone or tendon.

Zinc phthalocyanine labelled polyethylene glycol: preparation, characterization, interaction with bovine serum albumin and near infrared fluorescence imaging in vivo

Zinc phthalocyanine labelled polyethylene glycol was prepared to track and monitor the in vivo fate of polyethylene glycol. The chemical structures were characterized by nuclear magnetic resonance and infrared spectroscopy. Their light stability and fluorescence quantum yield were evaluated by UV-Visible and fluorescence spectroscopy methods. The interaction of zinc phthalocyanine labelled polyethylene glycol with bovine serum albumin was evaluated by fluorescence titration and isothermal titration calorimetry methods. Optical imaging in vivo, organ aggregation as well as distribution of fluorescence experiments for tracking polyethylene glycol were performed with zinc phthalocyanine labelled polyethylene glycol as fluorescent agent. Results show that zinc phthalocyanine labelled polyethylene glycol has good optical stability and high emission ability in the near infrared region. Imaging results demonstrate that zinc phthalocyanine labelled polyethylene glycol can track and monitor the in vivo process by near infrared fluorescence imaging, which implies its potential in biomaterials evaluation in vivo by a real-time noninvasive method.

Effect of enzymatic degradation on the mechanical properties of biological scaffold materials

BACKGROUND

Biological scaffolds must support a complex balance of resisting enzymatic degradation while promoting tissue remodeling. Thus, the purpose of this study was to evaluate the effects of in vitro enzymatic exposure on the mechanical properties of biological scaffolds. It was hypothesized that exposure to an enzyme solution would result in decreased tensile strength and that crosslinked scaffolds would resist enzymatic degradation more effectively than noncrosslinked scaffolds.

METHODS

Nine scaffolds were evaluated (four porcine dermis: Permacol™, CollaMend™, Strattice™, XenMatrix™; two human dermis: AlloMax™, FlexHD(®); two bovine pericardium: Veritas(®), PeriGuard(®); and one porcine small intestine submucosa: Surgisis™). Ten specimens (n = 10) were hydrated in saline at 37 °C and subjected to uniaxial testing to establish baseline properties. 50 specimens (n = 50) were incubated in collagenase solution at 37 °C for 2, 6, 12, 24, or 30 h (n = 10 each group) followed by uniaxial tensile testing.

RESULTS

Tensile strength was significantly reduced after 30 h for CollaMend™, AlloMax™, Veritas(®), Strattice™, XenMatrix™, Permacol™, and FlexHD(®) (p < 0.01), while PeriGuard(®) demonstrated a slight increase in tensile strength (p = 0.0188). Crosslinked bovine pericardium (PeriGuard(®)) maintained greater tensile strength than noncrosslinked bovine pericardium (Veritas(®)) throughout all exposure periods (p < 0.0001). Similarly, crosslinked porcine dermis (Permacol™) maintained greater tensile strength than noncrosslinked porcine dermis (Strattice™ and XenMatrix™) throughout all exposure periods (p < 0.0001).

CONCLUSIONS

Materials that deteriorate rapidly after in vitro enzymatic exposure may also deteriorate rapidly in vivo, particularly when exposed to a wound environment with elevated levels of matrix metalloproteinases. Permacol™, CollaMend™, Strattice™, FlexHD(®), and PeriGuard(®) survived the longest incubation period (30 h) and withstood mechanical testing. XenMatrix™, AlloMax™, Veritas(®), and Surgisis™ degraded more quickly and did not survive the longer exposure periods. Scaffolds that maintain strength characteristics after in vitro collagenase exposure may be advantageous for long-term hernia repair scenarios where elevated enzyme levels are expected.

Effect of implantation site and injury condition on host response to human-derived fascia lata ECM in a rat model

The host response and remodeling of ECM scaffolds are believed to be critical determinants of success or failure in repair or reconstructive procedures. Host response has been investigated in subcutaneous or abdominal wall implantation models. The extent to which evaluation of the host response to ECM intended for tendon or ligament repair should be performed in an orthotopic site is not known. This study compared the host response to human-derived fascia lata ECM among various implantation sites in the rat model. Results showed that a xenograft in the rat shoulder does not exhibit a different host response at 7 days from xenograft in the body wall, suggesting that either site may be appropriate to study the early host response to biologic grafts as well as the effect of various treatments aimed to modify the early host response. By 28 days, a xenograft in the rat shoulder does elicit a unique host response from that seen in the body wall. Therefore, it may be more appropriate to use an orthotopic shoulder model for investigating the long-term host response and remodeling of biologic grafts to be used for rotator cuff repair.

Mechanical properties of tyramine substituted-hyaluronan enriched fascia extracellular matrix

Naturally occurring biomaterial scaffolds derived from extracellular matrix (ECM) have been the topic of recent investigation in the context of rotator cuff tendon repair. We previously reported a method to treat fascia ECM with high molecular weight tyramine substituted-hyaluronan (TS-HA) for use as a tendon augmentation scaffold. The presence of crosslinked TS-HA in fascia was associated with an increased macrophage and giant cell response compared to water-treated controls after implantation in a rat abdominal wall model. The objective of this study was to determine the extent to which TS-HA treatment was associated with mechanical property changes of fascia after implantation in the rat model. Fascia samples in all groups demonstrated time-dependent decreases in mechanical properties. TS-HA-treated fascia with crosslinking exhibited a lower toe modulus, a trend toward lower toe stiffness, and a higher transition strain than water-treated controls not only after implantation, but also at time zero. TS-HA treatment, with or without crosslinking, had no significant effect on time-zero or post-implantation load relaxation ratio, load relaxation rate, linear-region stiffness, or linear-region modulus. Our findings demonstrated that the particular TS-HA treatment employed in this study decreased the low-load elastic mechanical properties of fascia ECM, in keeping with the heightened macrophage and giant cell host response seen previously. This work provides a starting point and guidance for investigating alternative HA treatment strategies.

The knee meniscus: structure-function, pathophysiology, current repair techniques, and prospects for regeneration

Extensive scientific investigations in recent decades have established the anatomical, biomechanical, and functional importance that the meniscus holds within the knee joint. As a vital part of the joint, it acts to prevent the deterioration and degeneration of articular cartilage, and the onset and development of osteoarthritis. For this reason, research into meniscus repair has been the recipient of particular interest from the orthopedic and bioengineering communities. Current repair techniques are only effective in treating lesions located in the peripheral vascularized region of the meniscus. Healing lesions found in the inner avascular region, which functions under a highly demanding mechanical environment, is considered to be a significant challenge. An adequate treatment approach has yet to be established, though many attempts have been undertaken. The current primary method for treatment is partial meniscectomy, which commonly results in the progressive development of osteoarthritis. This drawback has shifted research interest toward the fields of biomaterials and bioengineering, where it is hoped that meniscal deterioration can be tackled with the help of tissue engineering. So far, different approaches and strategies have contributed to the in vitro generation of meniscus constructs, which are capable of restoring meniscal lesions to some extent, both functionally as well as anatomically. The selection of the appropriate cell source (autologous, allogeneic, or xenogeneic cells, or stem cells) is undoubtedly regarded as key to successful meniscal tissue engineering. Furthermore, a large variation of scaffolds for tissue engineering have been proposed and produced in experimental and clinical studies, although a few problems with these (e.g., byproducts of degradation, stress shielding) have shifted research interest toward new strategies (e.g., scaffoldless approaches, self-assembly). A large number of different chemical (e.g., TGF-β1, C-ABC) and mechanical stimuli (e.g., direct compression, hydrostatic pressure) have also been investigated, both in terms of encouraging functional tissue formation, as well as in differentiating stem cells. Even though the problems accompanying meniscus tissue engineering research are considerable, we are undoubtedly in the dawn of a new era, whereby recent advances in biology, engineering, and medicine are leading to the successful treatment of meniscal lesions.

Ligament-derived matrix stimulates a ligamentous phenotype in human adipose-derived stem cells

Human adipose stem cells (hASCs) can differentiate into a variety of phenotypes. Native extracellular matrix (e.g., demineralized bone matrix or small intestinal submucosa) can influence the growth and differentiation of stem cells. The hypothesis of this study was that a novel ligament-derived matrix (LDM) would enhance expression of a ligamentous phenotype in hASCs compared to collagen gel alone. LDM prepared using phosphate-buffered saline or 0.1% peracetic acid was mixed with collagen gel (COL) and was evaluated for its ability to induce proliferation, differentiation, and extracellular matrix synthesis in hASCs over 28 days in culture at different seeding densities (0, 0.25 x 10(6), 1 x 10(6), or 2 x 10(6) hASC/mL). Biochemical and gene expression data were analyzed using analysis of variance. Fisher's least significant difference test was used to determine differences between treatments following analysis of variance. hASCs in either LDM or COL demonstrated changes in gene expression consistent with ligament development. hASCs cultured with LDM demonstrated more dsDNA content, sulfated-glycosaminoglycan accumulation, and type I and III collagen synthesis, and released more sulfated-glycosaminoglycan and collagen into the medium compared to hASCs in COL (p <or= 0.05). Increased seeding density increased DNA content incrementally over 28 days in culture for LDM but not COL constructs (p <or= 0.05). These findings suggest that LDM can stimulate a ligament phenotype by hASCs, and may provide a novel scaffold material for ligament engineering applications.