Hydrophilic films based on starch and carboxymethyl starch

Starch biopolymer films containing chitosan nanoparticles: A review

Starch biopolymer films incorporated with chitosan nanoparticles (CNP) or starch/CNP films are promising alternatives to non-degradable food packaging materials. The films can be utilized for active food packaging applications because CNP exhibits antimicrobial and antioxidant properties, which can improve food shelf-life. Nonetheless, knowledge of the effects of CNP inclusion on the properties of starch films is not fully elucidated. This paper reviews the influences of various concentrations of CNP, sizes of CNP, and other additives on the mechanical, thermal, barrier, antimicrobial, antioxidant, biodegradability, and cytotoxicity properties of starch/CNP films as well as the mechanisms involved in relation to food packaging applications. The usage of starch/CNP films for active food packaging can help to reduce environmental issues and contribute to food safety and security.

Porous antimicrobial crosslinked film of hydroxypropyl methylcellulose/carboxymethyl starch incorporating gallic acid for wound dressing application

Because of weak mechanical qualities and low degree of swelling of hydroxypropyl methylcellulose/carboxymethyl starch (HP/CMS) blended films for wound dressing application, this work prepared a unique antimicrobial crosslinked film utilizing succinic acid (SA) as a non-toxic crosslinker and gallic acid (GAL) as an antibacterial agent. It was observed that the infrared-shifted peak position of OH stretching and bending in HP/CMS/SA/GAL films was caused by hydrogen bond formation among HP, CMS and GAL components. The antimicrobial crosslinked films considerably enhanced their mechanical properties and swelling degree. After adding SA and GAL, the films retained their porosity structure as observed by scanning electron images. Moreover, GAL-loaded HP/CMS/SA films could inhibit Staphylococcus aureus and Escherichia coli growth, showing their wound dressing potential. Crystallinity percentage, water vapor transmission rate, gel fraction, water solubility, water uptake and cytotoxicity were also investigated.

A comprehensive review on starch: Structure, modification, and applications in slow/controlled-release fertilizers in agriculture

This comprehensive review thoroughly examines starch's structure, modifications, and applications in slow/controlled-release fertilizers (SRFs) for agricultural purposes. The review begins by exploring starch's unique structure and properties, providing insights into its molecular arrangement and physicochemical characteristics. Various methods of modifying starch, including physical, chemical, and enzymatic techniques, are discussed, highlighting their ability to impart desirable properties such as controlled release and improved stability. The review then focuses on the applications of starch in the development of SRFs. It emphasizes the role of starch-based hydrogels as effective nutrient carriers, enabling their sustained release to plants over extended periods. Additionally, incorporating starch-based hydrogel nano-composites are explored, highlighting their potential in optimizing nutrient release profiles and promoting plant growth. Furthermore, the review highlights the benefits of starch-based fertilizers in enhancing plant growth and crop yield while minimizing nutrient losses. It presents case studies and field trials demonstrating starch-based formulations' efficacy in promoting sustainable agricultural practices. Overall, this review consolidates current knowledge on starch, its modifications, and its applications in SRFs, providing valuable insights into the potential of starch-based formulations to improve nutrient management, boost crop productivity, and support sustainable agriculture.

Fabrication and Characterization of Orodispersible Composite Film from Hydroxypropylmethyl Cellulose-Crosslinked Carboxymethyl Rice Starch

Crosslinked carboxymethyl rice starch (CLCMRS), prepared via dual modifications of native rice starch (NRS) with chloroacetic acid and sodium trimetaphosphate, was employed to facilitate the disintegration of hydroxypropylmethylcellulose (HPMC) orodispersible films (ODFs), with or without the addition of glycerol. Fabricated by using the solvent casting method, the composite films, with the HPMC--LCMRS ratios of 9:1, 7:1, 5:1 and 4:1, were then subjected to physicochemical and mechanical evaluations, including weight, thickness, moisture content and moisture absorption, swelling index, transparency, folding endurance, scanning electron microscopy, Fourier transform infrared spectroscopy, tensile strength, elongation at break, and Young’s modulus, as well as the determination of disintegration time by using the Petri dish method (PDM) and slide frame and bead method (SFM). The results showed that HPMC-CLCMRS composite films exhibited good film integrity, uniformity, and transparency with up to 20% CLCMRS incorporation (4:1 ratio). Non-plasticized composite films showed no significant changes in the average weight, thickness, density, folding endurance (96−122), tensile strength (2.01−2.13 MPa) and Young’s modulus (10.28−11.59 MPa) compared to HPMC film (135, 2.24 MPa, 10.67 MPa, respectively). On the other hand, the moisture content and moisture absorption were slightly higher, whereas the elongation at break (EAB; 4.31−5.09%) and the transparency (4.73−6.18) were slightly lowered from that of the HPMC film (6.03% and 7.03%, respectively). With the addition of glycerol as a plasticizer, the average weight and film thickness increased, and the density decreased. The folding endurance was improved (to >300), while the transparency remained in the acceptable range. Although the tensile strength of most composite films decreased (0.66−1.75 MPa), they all exhibited improved flexibility (EAB 7.27−11.07%) while retaining structural integrity. The disintegration times of most composite films (PDM 109−331, SFM 70−214 s) were lower than those of HPMC film (PDM 345, SFM 229 s). In conclusion, the incorporation of CLCMRS significantly improved the disintegration time of the composite films whereas it did not affect or only slightly affected the physicochemical and mechanical characteristics of the films. The 5:1 and 4:1 HPMC:CLCMRS composite films, in particular, showed promising potential application as a film base for the manufacturing of orodispersible film dosage forms.

Development of Starch-Based Materials Using Current Modification Techniques and Their Applications: A Review

Starch is one of the most common biodegradable polymers found in nature, and it is widely utilized in the food and beverage, bioplastic industry, paper industry, textile, and biofuel industries. Starch has received significant attention due to its environmental benignity, easy fabrication, relative abundance, non-toxicity, and biodegradability. However, native starch cannot be directly used due to its poor thermo-mechanical properties and higher water absorptivity. Therefore, native starch needs to be modified before its use. Major starch modification techniques include genetic, enzymatic, physical, and chemical. Among those, chemical modification techniques are widely employed in industries. This review presents comprehensive coverage of chemical starch modification techniques and genetic, enzymatic, and physical methods developed over the past few years. In addition, the current applications of chemically modified starch in the fields of packaging, adhesives, pharmaceuticals, agriculture, superabsorbent and wastewater treatment have also been discussed.

Functionality and Applicability of Starch-Based Films: An Eco-Friendly Approach

The accumulation of high amounts of petro-based plastics is a growing environmental devastation issue, leading to the urgent need to innovate eco-safe packaging materials at an equivalent cost to save the environment. Among different substitutes, starch-based types and their blends with biopolymers are considered an innovative and smart material alternative for petrol-based polymers because of their abundance, low cost, biodegradability, high biocompatibility, and better-quality film-forming and improved mechanical characteristics. Furthermore, starch is a valuable, sustainable food packaging material. The rising and growing importance of designing starch-based films from various sources for sustainable food packaging purposes is ongoing research. Research on "starch food packaging" is still at the beginning, based on the few studies published in the last decade in Web of Science. Additionally, the functionality of starch-based biodegradable substances is technically a challenge. It can be improved by starch modification, blending starch with other biopolymers or additives, and using novel preparation techniques. Starch-based films have been applied to packaging various foods, such as fruits and vegetables, bakery goods, and meat, indicating good prospects for commercial utilization. The current review will give a critical snapshot of starch-based films' properties and potential applicability in the sustainable smart (active and intelligent) new packaging concepts and discuss new challenges and opportunities for starch bio composites.

Hydrophilic Films Based on Carboxymethylated Derivatives of Starch and Cellulose

The carboxymethylated derivatives of starch (CMS) and cellulose (CMC) were used for film preparation. The infrared spectroscopy revealed that crosslinking via ester bridges with citric acid occurred between the two polysaccharide derivatives. The effect of polysaccharide derivatives ratio on physicochemical properties of prepared films was evaluated. Generally, the values of tested parameters (moisture absorption, surface roughness, and mechanical and thermal properties) were between the values noted for neat CMS or CMC-based films. However, the physicochemical properties of the system with equal CMS/CMC weight ratio diverged from this trend, i.e., the highest tensile strength, the highest Young's modulus (ca. 3.4 MPa and ca. 4.9 MPa, respectively), with simultaneously the lowest moisture absorption (18.5% after 72 h) have been noted. Such systems could potentially find application in agriculture or pharmacy.

Sustainable panels based on starch bioadhesives: An insight into structural and tribological performance

This work was focused on evaluating the effects of polycarboxylic acid addition and retrogradation phenomenon on tribological performance, thermal, and mechanical properties of both, bioadhesives and sustainable panels. The rheological behavior of adhesives was affected by retrogradation, exhibiting formulations containing CA higher elastic modulus than those with BTCA, regardless of the acid concentration. With regard to tribomechanical properties, panels formulated with CA20 and BTCA80 adhesives presented the lower friction coefficient and wear degree. Thermocompression process induced a crosslinking reaction between wood fibers and starch-based adhesives, leading to more hydrophobic and thermally stable matrices in the presence of BTCA. The selection of the adhesive formulation depends on the moment of its use, since retrogradation limits its performance and that of the derived sustainable panels, being the adhesive CA20 more appropriate in freshly prepared formulations. Meanwhile, when the storage of the adhesive prepared in batch is required, the BTCA80 formulation would be more suitable. Thus, bioinspired materials can provide a valuable insight towards incorporating starch-based adhesives for wood applications.

Synthesis, DFT studies, fabrication, and optical characterization of the [ZnCMC]TF polymer (organic/inorganic) as an optoelectronic device

A novel carboxymethyl cellulose zinc thin film [ZnCMC]^TF was fabricated using the sol–gel technique.