Commercial Kevlar derived activated carbons for CO 2 and C 2 H 4 sorption

Utilization of waste tire derived activated carbon as CO2 capture and photocatalyst for CO2 conversion

The aims of this research were to prepare activated carbon (AC) impregnated with tetraethylenepentamine (TEPA) for use in carbon dioxide (CO2) capture and to then develop the AC-TEPA sorbent with titanium dioxide (TiO2) as a catalyst for photocatalytic reduction. The AC was impregnated with TEPA at three loading levels (2.5, 5, and 10% [w/w]) and then examined for its CO2 adsorption capacity under an ambient temperature and atmospheric pressure. The use of 5% (w/w) TEPA-impregnated AC (AC_5T) provided the highest CO2 adsorption capacity and long-term operation with a regeneration ability for up to 10 cycles. Then, AC_5T-doped TiO2 (AC_5T-TiO2) was prepared as a photocatalytic reduction catalyst, since the presence of carbon and nitrogen in AC_5T could reduce the band gap energy and so enhance the photocatalytic reduction. In addition, the CO2-saturated AC_5T was used as a CO2 source that could be directly converted to valuable chemicals using the AC_5T-TiO2 catalyst under photocatalytic reduction. Products were obtained in both the liquid (methanol) and gaseous (methane, carbon monoxide, and hydrogen) phases. Accordingly, the challenge of this research was to make valuable products from CO2 and to manage waste tires, following the circular economy concept.

On the use of plastic precursors for preparation of activated carbons and their evaluation in CO2 capture for biogas upgrading: a review

In circular economy, useful plastic materials are kept in circulation as opposed to being landfilled, incinerated, or leaked into the natural environment. Pyrolysis is a chemical recycling technique useful for unrecyclable plastic wastes that produce gas, liquid (oil), and solid (char) products. Although the pyrolysis technique has been extensively studied and there are several installations applying it on the industrial scale, no commercial applications for the solid product have been found yet. In this scenario, the use of plastic-based char for the biogas upgrading may be a sustainable way to transform the solid product of pyrolysis into a particularly beneficial material. This paper reviews the preparation and main parameters of the processes affecting the final textural properties of the plastic-based activated carbons. Moreover, the application of those materials for the CO₂ capture in the processes of biogas upgrading is largely discussed.

Sorption and Textural Properties of Activated Carbon Derived from Charred Beech Wood

The aim of this study was to prepare activated carbon materials with different porous structures. For this purpose, the biomass precursor, beech wood, was carbonized in an inert atmosphere, and the obtained charcoal was physically activated using carbon dioxide at 1273 K. Different porous structures were obtained by controlling the time of the activation process. Prepared materials were characterized in terms of textural (N₂ sorption at 77 K), structural (XRD), and sorption properties (CO₂, C₂H₄, C₄H₁₀). The shortest activation time resulted in a mostly microporous structure, which provided a high sorption of CO₂. Increasing the activation time led to an increasing of the pores’ diameters. Therefore, the highest ethene uptake was obtained for the material with an intermediate activation time, while the highest butane uptake was obtained for the material with the highest activation time.