Magnetic nano- and microparticles in biotechnology

Assessment of CRISPRa-mediated gdnf overexpression in an In vitro Parkinson's disease model

Introduction

Parkinson's disease (PD) presents a significant challenge in medical science, as current treatments are limited to symptom management and often carry significant side effects. Our study introduces an innovative approach to evaluate the effects of gdnf overexpression mediated by CRISPRa in an in vitro model of Parkinson's disease. The expression of gdnf can have neuroprotective effects, being related to the modulation of neuroinflammation and pathways associated with cell survival, differentiation, and growth.

Methods

We have developed a targeted delivery system using a magnetite nanostructured vehicle for the efficient transport of genetic material. This system has resulted in a substantial increase, up to 200-fold) in gdnf expression in an In vitro model of Parkinson's disease using a mixed primary culture of astrocytes, neurons, and microglia.

Results and Discussion

The delivery system exhibits significant endosomal escape of more than 56%, crucial for the effective delivery and activation of the genetic material within cells. The increased gdnf expression correlates with a notable reduction in MAO-B complex activity, reaching basal values of 14.8 μU/μg of protein, and a reduction in reactive oxygen species. Additionally, there is up to a 34.6% increase in cell viability in an In vitro Parkinson's disease model treated with the neurotoxin MPTP. Our study shows that increasing gdnf expression can remediate some of the cellular symptoms associated with Parkinson's disease in an in vitro model of the disease using a novel nanostructured delivery system.

Synergies of pH-induced calcium phosphate precipitation and magnetic separation for energy-efficient harvesting of freshwater microalgae

Energy- and time-consuming concentration steps currently limit the industrial application of microalgae. Compared to state-of-the-art technologies, magnetic separation shows a high potential for efficient harvesting of microalgae. This study presents a novel approach to combine pH-induced calcium phosphate precipitation with cheap natural magnetite microparticles for magnetic separation of the freshwater microalgae Chlorella vulgaris. Harvesting efficiencies up to 98% were achieved at moderate pH and low particle and calcium phosphate concentrations in a model medium. However, cultivation-dependent high loads of algogenic organic matter can severely inhibit flocculation and particle/algae interactions, requiring higher salt concentrations or pH. Harvesting efficiencies above 90% were still attainable at moderate pH with increased calcium phosphate concentrations of 10mM. Acidification of the suspension to pH 5 allows for simple and reversible particle recycling. The presented process provides a promising path to universal and cost-effective harvesting, advancing the utilization of microalgae as a sustainable bioresource.

Interactions of proteins with metal-based nanoparticles from a point of view of analytical chemistry - Challenges and opportunities

Interactions of proteins with nanomaterials draw attention of many research groups interested in fundamental phenomena. However, alongside with valuable information regarding physicochemical aspects of such processes and their mechanisms, they more and more often prove to be useful from a point of view of bioanalytics. Deliberate use of processes based on adsorption of proteins on nanoparticles (or vice versa) allows for a development of new analytical methods and improvement of the existing ones. It also leads to obtaining of nanoparticles of desired properties and functionalities, which can be used as elements of analytical tools for various applications. Due to interactions with nanoparticles, proteins can also gain new functionalities or lose their interfering potential, which from perspective of bioanalytics seems to be very inviting and attractive. In the framework of this article we will discuss the bioanalytical potential of interactions of proteins with a chosen group of nanoparticles, and implementation of so driven processes for biosensing. Moreover, we will show both positive and negative (opportunities and challenges) aspects resulting from the presence of proteins in media/samples containing metal-based nanoparticles or their precursors.

Nickel Ferrite Nanoparticles as an Adsorbent for Immobilized Metal Affinity Chromatography of Proteins

A simple method of preparing amorphous nickel ferrite nanoparticles of about 5 nm diameter is described. These particles were characterized by dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The nanoparticles were evaluated for their use as a magnetic material for immobilized metal affinity chromatography (IMAC). The ferrite nanoparticles bound to bovine serum albumin (BSA) and the binding fitted Langmuir isotherm model. A high capacity of 916 mg BSA/g dried nanoparticle was observed. Six proteins (Soybean trypsin inhibitor (STI), lactate dehydrogenase (LDH), papain, catalase, β-galactosidase and casein) were used and all were found to bind at >90% level (except papain which showed 84% binding). All the proteins except LDH and β-galactosidase could be eluted with 1 M imidazole and with % activity recovery of >80%. Papain could be purified from its dried crude latex by 5-fold and purified papain showed a single band on SDS-PAGE. These nanoparticles constitute a high capacity and are magnetic material useful for IMAC and do not require any pre-functionalization.

Non-Invasive Colorimetric Magneto Loop-Mediated Isothermal Amplification (CM-LAMP) Method for Helicobacter pylori Detection

More than half the world's population is thought to be infected with Helicobacter pylori. Although the majority of infected people are asymptomatic, H. pylori infection may cause gastric ulcers and deadly gastric cancer. Owing to the difficulty and invasiveness of current routine culture and diagnostic methods, a highly sensitive and specific noninvasive assay for H. pylori is of interest. This study highlighted the design and performance of a colorimetric magneto loop-mediated isothermal amplification (CM-LAMP) assay to detect H. pylori in spiked saliva samples. LF primers were coated on magnetic nanoparticles by carbodiimide-induced immobilization and functionally used for solidphase amplification. During the LAMP reaction at 66°C, biotin-tagged FIPs were incorporated into LAMP amplicons. The colorimetric signal developed after the addition of NeutrAvidin horseradish peroxidase conjugate (NA-HRP) and ABTS. None of the tested microorganisms, including closely related bacteria, was shown positive by the CM-LAMP assay except H. pylori isolates. This novel platform was highly specific and 100-fold more sensitive (40 CFU/ml or 0.2 CFU per reaction) than the PCR and conventional LAMP assays for the detection of H. pylori in spiked saliva. Our results demonstrated the feasibility of using this noninvasive molecular diagnostic test to detect H. pylori in saliva samples.

Ni-modified magnetic nanoparticles for affinity purification of His-tagged proteins from the complex matrix of the silkworm fat body

Purification of recombinant proteins is often a challenging matter because high purity and high recovery are desired. If the expressed recombinant protein is also in a complex matrix, such as from the silkworm expression system, purification becomes more challenging. Even if purification from the silkworm expression system is troublesome, it benefits from a high capacity for the production of recombinant proteins. In this study, magnetic nanoparticles (MNPs) were investigated as a suitable tool for the purification of proteins from the complex matrix of the silkworm fat body. The MNPs were modified with nickel so that they have an affinity for His-tagged proteins, as the MNP purification protocol itself does not need special equipment except for a magnet. Among the three different kinds of investigated MNPs, MNPs with sizes of 100 nm to 200 nm and approximately 20 nm-thick nickel shells were the most suitable for our purpose. With them, the total protein amount was reduced by up to at least approximately 77.7%, with a protein recovery of around 50.8% from the silkworm fat body. The minimum binding capacity was estimated to be 83.3 µg protein/mg MNP. Therefore, these MNPs are a promising tool as a purification pretreatment of complex sample matrices.

Synthesis of bismuth nanoparticle-loaded cobalt ferrite for electrochemical detection of heavy metal ions

As an efficient modified electrode material for the detection of heavy metal ions, bismuth nanoparticles (BiNPs) were loaded on cobalt ferrite (CoFe₂O₄), a unique magnetic photocatalytic material, to fabricate a highly sensitive sensor. The obtained BiNPs@CoFe₂O₄ nanocomposites showed excellent adsorption and electrical conductivity using a Square Wave Anodic Stripping Voltammetry (SWASV) detection method. Under optimized conditions, the BiNPs@CoFe₂O₄/GCE sensor could simultaneously determine Pb²⁺ and Cd²⁺, with detection limits of 7.3 and 8.2 nM, respectively. In addition, the BiNPs@CoFe₂O₄ exhibited acceptable reproducibility and good stability, which indicated great potential for the detection of heavy metal ions in reality.

As an efficient modified electrode material for the detection of heavy metal ions, bismuth nanoparticles (BiNPs) were loaded on cobalt ferrite (CoFe₂O₄), a unique magnetic photocatalytic material, to fabricate a highly sensitive sensor.

Screening and analysis of cyclooxygenase-2 inhibitors from the complex matrix: A case study to illustrate the important effect of immobilized enzyme activity in magnetic ligand fishing

Magnetic ligand fishing is one of the most widely used methods to screen and separate potentially bioactive compounds from complex mixtures. However, it is poorly understood the ambiguous relations between immobilized enzyme activity and fishing results (accuracy and sensitivity). Therefore, to investigate the underlying relationship of them, we fabricated the immobilized enzyme with different activities by introducing a novel support material, nickel ions (Ni²⁺) functionalized magnetic mesoporous silica microspheres (MMSM@PDA-Ni²⁺). It possesses a higher activity than the previous report because of site-directed immobilization. Then, the immobilized COX-2 with different activities were prepared using different immobilization methods, including Ni²⁺ affinity-oriented immobilization, polydopamine (PDA) covalent immobilization, and conventional glutaraldehyde (GA) covalent immobilization. A standard mixture (COX-2 inhibitors and noninhibitors) and green tea extract were used to compare and evaluate the fishing results systematically. It displayed the fished inhibitors were dramatically reduced with the decreased activity of immobilized COX-2, indicating that immobilized enzyme activity played a critical role in a reliable magnetic ligand fishing analysis. This development questions some of the previous studies aimed at rapid screening bioactive compounds in natural products and opens new possibilities for accurate and sensitive magnetic ligand fishing analysis. Also, the introduced novel materials with mild immobilization strategy preserve enzyme activity and spatial conformational, therefore, provides a valuable tool in future applications.

DNA extraction on bio-chip: history and preeminence over conventional and solid-phase extraction methods

This review covers a developmental progression on early to modern taxonomy at cellular level following the advent of electron microscopy and the advancement in deoxyribonucleic acid (DNA) extraction for expatiation of biological classification at DNA level. Here, we discuss the fundamental values of conventional chemical methods of DNA extraction using liquid/liquid extraction (LLE) followed by development of solid-phase extraction (SPE) methods, as well as recent advances in microfluidics device-based system for DNA extraction on-chip. We also discuss the importance of DNA extraction as well as the advantages over conventional chemical methods, and how Lab-on-a-Chip (LOC) system plays a crucial role for the future achievements.

On the performance of immobilized cell bioreactors utilizing a magnetic field

This review focuses on the performance of immobilized cell bioreactors utilizing a magnetic field. These reactors utilized immobilized cells on magnetic particles or beads as the solid phase. All published research papers dealing with the performance of immobilized cell bioreactors utilizing a magnetic field from the early 1960s to the present time were considered and analyzed. It was noted that many microorganisms such as Saccharomyces cerevisiae were immobilized on different supports in these reactors. These papers used the magnetic field for several purposes, mainly for the stabilization of magnetic particles to prevent their washout from the column while operating with relatively high substrate flow rates to enhance mass transfer processes. It was observed that most publications used an axial magnetic field. In addition, most of the magnetic particles were prepared by entrapment. Some comments are presented at the end of the review which show the gaps in this promising application.

Magneto-chemotherapy for cervical cancer treatment with camptothecin loaded Fe3O4 functionalized β-cyclodextrin nanovehicle

We portray a novel way to synthesis of iron oxide magnetic nanoparticle incorporated β-cyclodextrin (β-CD) nanocarrier stabilized by ethylenediamine tetra acetic acid (EDTA) obtaining remarkable biocompatibility and biodegradability.

Structural behavior of laser-irradiated γ-Fe2O3 nanocrystals dispersed in porous silica matrix : γ-Fe2O3 to α-Fe2O3 phase transition and formation of ε-Fe2O3

The effects of laser irradiation on γ-Fe₂O₃ 4 ± 1 nm diameter maghemite nanocrystals synthesized by co-precipitation and dispersed into an amorphous silica matrix by sol-gel methods have been investigated as function of iron oxide mass fraction. The structural properties of γ-Fe₂O₃ phase were carefully examined by X-ray diffraction and transmission electron microscopy. It has been shown that γ-Fe₂O₃ nanocrystals are isolated from each other and uniformly dispersed in silica matrix. The phase stability of maghemite nanocrystals was examined in situ under laser irradiation by Raman spectroscopy and compared with that resulting from heat treatment by X-ray diffraction. It was concluded that ε-Fe₂O₃ is an intermediate phase between γ-Fe₂O₃ and α-Fe₂O₃ and a series of distinct Raman vibrational bands were identified with the ε-Fe₂O₃ phase. The structural transformation of γ-Fe₂O₃ into α-Fe₂O₃ occurs either directly or via ε-Fe₂O₃, depending on the rate of nanocrystal agglomeration, the concentration of iron oxide in the nanocomposite and the properties of silica matrix. A phase diagram is established as a function of laser power density and concentration.

Detection of Campylobacter DNA using magnetic nanoparticles coupled with PCR and a colorimetric end-point system

Campylobacter is an important food-borne pathogen causing acute gastroenteritis worldwide. Magnetic nanoparticle-based PCR coupled with streptavidin-horseradish peroxidase and a substrate was used for colorimetric detection. Forward primers conjugated to magnetic nanoparticles facilitated separation and concentration of Campylobacter DNA in a sample matrix. After PCR, a green color developed and was observed using the unaided eye, or detected using a spectrophotometer. High specificity and sensitivity of the 100 fg DNA/PCR reaction were achieved in pure culture experiments. The technique was applied for detection of Campylobacter on naturally contaminated chicken skin. All positive results were in agreement with results achieved using a conventional culture method. The magnetic nanoparticle-PCR-enzyme linked gene assay was practical and useful for detection of Campylobacter in complex matrices with PCR-interfering substances.

Magnetically modified microalgae and their applications

The majority of algal cells can interact with a wide range of nano- and microparticles. Upon interaction the modified cells usually maintain their viability and the presence of foreign material on their surfaces or in protoplasm can provide additional functionalities. Magnetic modification and labeling of microalgal biomass ensures a wide spectrum of biotechnological, bioanalytical and environmental applications. Different aspects of microalgal cell magnetic modification are covered in the review, followed by successful applications of magnetic algae. Modified cells can be employed during their harvesting and removal, applied in toxicity microscreening devices and also as efficient adsorbents of different types of xenobiotics.

Production, characterization, and biogas application of magnetic hydrochar from cellulose

Hydrothermal carbonization (HTC) produces carbon-rich nano-micro size particles. In this study, magnetic hydrochar (MHC) was prepared from model compound cellulose by simply adding ferrites during HTC. The effects of ferrites on HTC were evaluated by characterizing solid MHC and corresponding process liquid. Additionally, magnetic stability of MHC was tested by magnetic susceptibility method. Finally, MHC was used as support media for anaerobic films in anaerobic digestion (AD). Ash-free mass yield was around 50% less in MHC than hydrochar produced without ferrites at any certain HTC reaction condition, where organic part of MHC is mainly carbon. In fact, amorphous hydrochar was growing on the surface of inorganic ferrites. MHC maintained magnetic susceptibility regardless of reaction time at reaction temperature 250°C. Pronounced inhibitory effects of magnetic hydrochar occurred during start-up of AD but diminished with prolong AD times. Visible biofilms were observed on the MHC by laser scanning microscope after AD.

Applications of biosynthesized metallic nanoparticles - a review

We present a comprehensive review of the applications of biosynthesized metallic nanoparticles (NPs). The biosynthesis of metallic NPs is the subject of a number of recent reviews, which focus on the various "bottom-up" biofabrication methods and characterization of the final products. Numerous applications exploit the advantages of biosynthesis over chemical or physical NP syntheses, including lower capital and operating expenses, reduced environmental impacts, and superior biocompatibility and stability of the NP products. The key applications reviewed here include biomedical applications, especially antimicrobial applications, but also imaging applications, catalytic applications such as reduction of environmental contaminants, and electrochemical applications including sensing. The discussion of each application is augmented with a critical review of the potential for continued development.

Magnetic biocatalysts and their uses to obtain biodiesel and biosurfactants

Nanobiocatalysis, as the synergistic combination of nanotechnology and biocatalysis, is rapidly emerging as a new frontier of biotechnology. The use of immobilized enzymes in industrial applications often presents advantages over their soluble counterparts, mainly in view of stability, reusability and simpler operational processing. Because of their singular properties, such as biocompatibility, large and modifiable surface and easy recovery, iron oxide magnetic nanoparticles (MNPs) are attractive super-paramagnetic materials that serve as a support for enzyme immobilization and facilitate separations by applying an external magnetic field. Cross-linked enzyme aggregates (CLEAs) have several benefits in the context of industrial applications since they can be cheaply and easily prepared from unpurified enzyme extracts and show improved storage and operational stability against denaturation by heat and organic solvents. In this work, by using the aforementioned advantages of MNPs of magnetite and CLEAs, we prepared two robust magnetically-separable types of nanobiocatalysts by binding either soluble enzyme onto the surface of MNPs functionalized with amino groups or by cross-linking aggregates of enzyme among them and to MNPs to obtain magnetic CLEAs. For this purpose the lipase B of Candida antarctica (CALB) was used. The hydrolytic and biosynthetic activities of the resulting magnetic nanobiocatalysts were assessed in aqueous and organic media. Thus, the hydrolysis of triglycerides and the transesterification reactions to synthesize biodiesel and biosurfactants were studied using magnetic CLEAs of CALB. The efficiency and easy performance of this magnetic biocatalysis validates this proof of concept and sets the basis for the application of magnetic CLEAs at industrial scale.

Improving 2-phenylethanol and 6-pentyl-α-pyrone production with fungi by microparticle-enhanced cultivation (MPEC)

Trichoderma atroviride IMI 206040 synthesizes the coconut lactone 6-pentyl-α-pyrone (6-PAP) de novo and Aspergillus niger DSM 821 produces the rose-like flavour compound 2-phenylethanol (2-PE) from the precursor l-phenylalanine. Here, microparticles of different chemical composition and nominal particle diameter in the range 5-250 µm were added to shake-flask cultures of both fungi to investigate the particles' effect on product formation. Maximum 2-PE concentration increased by a factor of 1.3 to 1430 mg/l with the addition of 2% w/v talc (40 µm diameter). Maximum 6-PAP concentration increased by a factor of 2 to 40 mg/l with the addition of 2% w/v iron (II, III) oxide. The influence of ions leaching out of the particles was investigated by cultivating the fungi in leached particle medium. For the first time, the positive effect of the microparticle-enhanced cultivation (MPEC) technique on the microbial production of volatile metabolites, here flavour compounds from submerged fungal cultures, is demonstrated. The effect is strain- and particle-specific.

Microwave-synthesized magnetic chitosan microparticles for the immobilization of yeast cells

An extremely simple procedure has been developed for the immobilization of Saccharomyces cerevisiae cells on magnetic chitosan microparticles. The magnetic carrier was prepared using an inexpensive, simple, rapid, one-pot process, based on the microwave irradiation of chitosan and ferrous sulphate at high pH. Immobilized yeast cells have been used for sucrose hydrolysis, hydrogen peroxide decomposition and the adsorption of selected dyes.

Influence of surface-modified maghemite nanoparticles on in vitro survival of human stem cells

Surface-modified maghemite (γ-Fe2O3) nanoparticles were obtained by using a conventional precipitation method and coated with D-mannose and poly(N,N-dimethylacrylamide). Both the initial and the modified particles were characterized by transmission electron microscopy and dynamic light scattering with regard to morphology, particle size and polydispersity. In vitro survival of human stem cells was then investigated by using the methyl thiazolyl tetrazolium (MTT) assay, which showed that D-mannose- and poly(N,N-dimethylacrylamide)-coated γ-Fe2O3 particles exhibit much lower level of cytotoxicity than the non-coated γ-Fe2O3.

Polymeric nanocarriers for magnetic targeted drug delivery: preparation, characterization, and in vitro and in vivo evaluation

In this paper the preparation of magnetic nanocarriers (MNCs), containing superparamagnetic domains, is reported, useful as potential magnetically targeted drug delivery systems. The preparation of MNCs was performed by using the PHEA-IB-p(BMA) graft copolymer as coating material through the homogenization-solvent evaporation method. Magnetic and nonmagnetic nanocarriers containing flutamide (FLU-MNCs) were prepared. The prepared nanocarriers have been exhaustively characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and magnetic measurements. Biological evaluation was performed by in vitro cytotoxicity and cell uptake tests and in vivo biodistribution studies. Magnetic nanocarriers showed dimensions of about 300 nm with a narrow size distribution, an amount of loaded FLU of 20% (w/w), and a superparamagnetic behavior. Cell culture experiments performed on prostate cancer cell line LNCaP demonstrated the cytotoxic effect of FLU-MNCs. In vivo biodistribution studies carried out by the application of an external magnetic field in rats demonstrated the effect of the external magnet on modifying the biodistribution of FLU-MNCs. FLU-MNCs resulted efficiently internalized by tumor cells and susceptible to magnetic targeting by application of an external magnetic field. The proposed nanocarriers can represent a very promising approach to obtain an efficient magnetically targeted anticancer drug delivery system.

Physicochemical approach to freshwater microalgae harvesting with magnetic particles

Magnetic harvesting of microalgal biomass provides an attractive alternative to conventional methods. The approach to this issue has so far been pragmatic, focused mainly on finding cheap magnetic agents in combination with harvestable microalgae species. The aim of this work was to study experimentally and theoretically the mechanisms leading to cell-magnetic agent attachment/detachment using real experiments and predictions made by colloidal adhesion (XDLVO) model. Two types of well defined magnetic beads (MBs) carrying ion exchange functional groups (DEAE - diethylaminoethyl and PEI - polyethylenimine) were studied in connection with microalgae (Chlorella vulgaris). Optimal harvesting efficiencies (>90%) were found for DEAE and PEI MBs, while efficient detachment was achieved only for DEAE MBs (>90%). These findings were in accordance with the predictions by XDLVO model. Simultaneously there was found a discrepancy between the XDLVO prediction and the poor detachment of PEI MBs from microalgal surface. This can be ascribed to an additional interaction (probably covalent bonds) between PEI and algal surface, which the XDLVO model is unable to capture given by its non-covalent nature.

Magnetically modified spent grain as a low-cost, biocompatible and smart carrier for enzyme immobilisation

BACKGROUND

Food and feed technology and biotechnology benefit from the use of immobilised enzymes. New low-cost enzyme carriers exhibiting high biocompatibility and response to external magnetic field can substantially improve the application potential of immobilised enzyme systems.

RESULTS

Ferrofluid-modified spent grain was used as a low-cost, biocompatible and magnetically responsive carrier for the immobilisation of Candida rugosa lipase. Several immobilisation procedures were tested using both native and poly(ethyleneimine)-modified magnetic spent grain. Activity of immobilised lipase per unit mass of carrier, operational stability, time stability and Michaelis constant were compared. In general, magnetic spent grain modified with poly(ethyleneimine) bound a smaller amount of active lipase than unmodified magnetic spent grain, but the operational and storage stabilities of enzyme immobilised on poly(ethyleneimine)-modified carrier were very high.

CONCLUSION

Ferrofluid-modified spent grain can be a promising low-cost magnetic carrier for enzyme immobilisation, applicable e.g. in food and feed technology and biotechnology.

Thermostable trypsin conjugates immobilized to biogenic magnetite show a high operational stability and remarkable reusability for protein digestion

In this work, magnetosomes produced by microorganisms were chosen as a suitable magnetic carrier for covalent immobilization of thermostable trypsin conjugates with an expected applicability for efficient and rapid digestion of proteins at elevated temperatures. First, a biogenic magnetite was isolated from Magnetospirillum gryphiswaldense and its free surface was coated with the natural polysaccharide chitosan containing free amino and hydroxy groups. Prior to covalent immobilization, bovine trypsin was modified by conjugating with α-, β- and γ-cyclodextrin. Modified trypsin was bound to the magnetic carriers via amino groups using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysulfosuccinimide as coupling reagents. The magnetic biomaterial was characterized by magnetometric analysis and electron microscopy. With regard to their biochemical properties, the immobilized trypsin conjugates showed an increased resistance to elevated temperatures, eliminated autolysis, had an unchanged pH optimum and a significant storage stability and reusability. Considering these parameters, the presented enzymatic system exhibits properties that are superior to those of trypsin forms obtained by other frequently used approaches. The proteolytic performance was demonstrated during in-solution digestion of model proteins (horseradish peroxidase, bovine serum albumin and hen egg white lysozyme) followed by mass spectrometry. It is shown that both magnetic immobilization and chemical modification enhance the characteristics of trypsin making it a promising tool for protein digestion.

Harvesting microalgae with microwave synthesized magnetic microparticles

To make magnetic harvesting a more viable option, a suspension of inexpensive iron oxide magnetic microparticles (IOMMs) prepared by microwave treatment is presented as a new agent for separating Chlorella vulgaris from a highly diluted suspension. Separation efficiencies were tested under various conditions (model environment, cultivation media, different pH), revealing not only a dependency on the pH and amount of IOMMs, but also the influence of the ions present in the culture medium. Phosphorus ions were identified as the medium component interfering with algae-IOMMs interactions that are essential for magnetic cell separations in the culture medium. Phosphorus limited C. vulgaris cells were magnetically separated from the medium at separation efficiencies of over 95% at a 3:1 mass ratio of IOMMs to microalgae. A rapid and complete demagnetization of harvested algae was achieved by acidic treatment (10vol.% H(2)SO(4)) at 40°C under the influence of ultrasound.

Immobilization of Candida rugosa lipase on superparamagnetic Fe3O4 nanoparticles for biocatalysis in low-water media

A simple immobilization method for Candida rugosa lipase on superparamagnetic Fe3O4 nanoparticles is described. The Fe3O4 nanoparticles were coated with PEI and Candida rugosa lipase was adsorbed on these particles via electrostatic interactions. The immobilization resulted in marginal simultaneous purification. However, the immobilized preparation showed 110× higher transesterification activity in low-water media. It was also efficient in kinetic resolution of (±)-1-phenylethanol with eep of 99 % and E = 412 within 24 h.

Harvesting fresh water and marine algae by magnetic separation: screening of separation parameters and high gradient magnetic filtration

In this study, the focus is on magnetic separation of fresh water algae Chlamydomonas reinhardtii and Chlorella vulgaris as well as marine algae Phaeodactylum tricornutum and Nannochloropsis salina by means of silica-coated magnetic particles. Due to their small size and low biomass concentrations, harvesting algae by conventional methods is often inefficient and cost-consuming. Magnetic separation is a powerful tool to capture algae by adsorption to submicron-sized magnetic particles. Hereby, separation efficiency depends on parameters such as particle concentration, pH and medium composition. Separation efficiencies of >95% were obtained for all algae while maximum particle loads of 30 and 77 g/g were measured for C. reinhardtii and P. tricornutum at pH 8 and 12, respectively. This study highlights the potential of silica-coated magnetic particles for the removal of fresh water and marine algae by high gradient magnetic filtration and provides critical discussion on future improvements.

Kinetic, Isotherm and Thermodynamic Analysis on Adsorption of Cr(VI) Ions from Aqueous Solutions by Synthesis and Characterization of Magnetic-Poly(divinylbenzene-vinylimidazole) Microbeads

The magnetic-poly(divinylbenzene-1-vinylimidazole) [m-poly(DVB-VIM)] microbeads (average diameter 53-212 μm) were synthesized and characterized; their use as adsorbent in removal of Cr(VI) ions from aqueous solutions was investigated. The m-poly(DVB-VIM) microbeads were prepared by copolymerizing of divinylbenzene (DVB) with 1-vinylimidazole (VIM). The m-poly(DVB-VIM) microbeads were characterized by N(2) adsorption/desorption isotherms, ESR, elemental analysis, scanning electron microscope (SEM) and swelling studies. At fixed solid/solution ratio the various factors affecting adsorption of Cr(VI) ions from aqueous solutions such as pH, initial concentration, contact time and temperature were analyzed. Langmuir, Freundlich and Dubinin-Radushkvich isotherms were used as the model adsorption equilibrium data. Langmuir isotherm model was the most adequate. The pseudo-first-order, pseudo-second-order, Ritch-second-order and intraparticle diffusion models were used to describe the adsorption kinetics. The apparent activation energy was found to be 5.024 kJ mol(-1), which is characteristic of a chemically controlled reaction. The experimental data fitted to pseudo-second-order kinetic. The study of temperature effect was quantified by calculating various thermodynamic parameters such as Gibbs free energy, enthalpy and entropy changes. The thermodynamic parameters obtained indicated the endothermic nature of adsorption of Cr(VI) ions. Morever, after the use in adsorption, the m-poly(DVB-VIM) microbeads with paramagnetic property were separeted via the applied magnetic force. The magnetic beads could be desorbed up to about 97% by treating with 1.0 M NaOH. These features make the m-poly(DVB-VIM) microbeads a potential candidate for support of Cr(VI) ions removal under magnetic field.

Specific peptides as alternative to antibody ligands for biomagnetic separation of Clostridium tyrobutyricum spores

Nowadays, the reference method for the detection of Clostridium tyrobutyricum in milk is the most-probable-number method, a very time-consuming and non-specific method. In this work, the suitability of the use of superparamagnetic beads coated with specific antibodies and peptides for bioseparation and concentration of spores of C. tyrobutyricum has been assessed. Peptide or antibody functionalized nanoparticles were able to specifically bind C. tyrobutyricum spores and concentrate them up to detectable levels. Moreover, several factors, such as particle size (200 nm and 1 μm), particle derivatization (aminated and carboxylated beads), coating method, and type of ligand have been studied in order to establish the most appropriate conditions for spore separation. Results show that concentration of spore is favored by a smaller bead size due to the wider surface of interaction in relation to particle volume. Antibody orientation, related to the binding method, is also critical in spore recovery. However, specific peptides seem to be a better ligand than antibodies, not only due to the higher recovery ratio of spores obtained but also due to the prolonged stability over time, allowing an optimal recovery of spores up to 3 weeks after bead coating. These results demonstrate that specific peptides bound to magnetic nanoparticles can be used instead of traditional antibodies to specifically bind C. tyrobutyricum spores being a potential basis for a rapid method to detect this bacterial target.

Synthesis, characterization and in vitro drug release of magnetic N-benzyl-O-carboxymethylchitosan nanoparticles loaded with indomethacin

Magnetic N-benzyl-O-carboxymethylchitosan nanoparticles were synthesized through incorporation and in situ methods and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry, and magnetization measurements. Indomethacin was incorporated into the nanoparticles via the solvent evaporation method. The indomethacin-loaded magnetic nanoparticles were characterized by the same techniques, and also by transmission electron microscopy. The nanoparticles containing the polymer showed a drug loading efficiency of between 60.8% and 74.8%, and the magnetic properties were not significantly affected by incorporation of the drug. The in vitro drug release study was carried out in simulated body fluid, pH 7.4 at 37°C. The profiles showed an initial fast release, which became slower as time progressed. The percentage of drug released after 5 h was between 60% and 90%, and the best fitting mathematical model for drug release was the Korsmeyer-Peppas model, indicating a Fickian diffusion mechanism.

Surface modification and biomolecule immobilization on polymer spheres for biosensing applications

Microspheres and nanospheres are being used in many of today's biosensing applications for automated sample processing, flow cytometry, signal amplification in microarrays, and labeling in multiplexed analyses. The surfaces of the spheres/particles need to be modified with proteins and other biomolecules to be used in these sensing applications. This chapter contains protocols to modify carboxyl- and amine-coated polymer spheres with proteins and peptides.