Numerical analysis of intensity signals resulting from genotyping pooled DNA samples in beef cattle and broiler chicken

Use of DNA pools of a reference population for genomic selection of a binary trait in Atlantic salmon

Genomic selection has a great potential in aquaculture breeding since many important traits are not directly measured on the candidates themselves. However, its implementation has been hindered by staggering genotyping costs because of many individual genotypes. In this study, we explored the potential of DNA pooling for creating a reference population as a tool for genomic selection of a binary trait. Two datasets from the SalmoBreed population challenged with salmonid alphavirus, which causes pancreas disease, were used. Dataset-1, that includes 855 individuals (478 survivors and 377 dead), was used to develop four DNA pool samples (i.e., 2 pools each for dead and survival). Dataset-2 includes 914 individuals (435 survivors and 479 dead) belonging to 65 full-sibling families and was used to develop in-silico DNA pools. SNP effects from the pool data were calculated based on allele frequencies estimated from the pools and used to calculate genomic breeding values (GEBVs). The correlation between SNP effects estimated based on individual genotypes and pooled data increased from 0.3 to 0.912 when the number of pools increased from 1 to 200. A similar trend was also observed for the correlation between GEBVs, which increased from 0.84 to 0.976, as the number of pools per phenotype increased from 1 to 200. For dataset-1, the accuracy of prediction was 0.71 and 0.70 when the DNA pools were sequenced in 40× and 20×, respectively, compared to an accuracy of 0.73 for the SNP chip genotypes. For dataset-2, the accuracy of prediction increased from 0.574 to 0.691 when the number of in-silico DNA pools increased from 1 to 200. For this dataset, the accuracy of prediction using individual genotypes was 0.712. A limited effect of sequencing depth on the correlation of GEBVs and prediction accuracy was observed. Results showed that a large number of pools are required to achieve as good prediction as individual genotypes; however, alternative effective pooling strategies should be studied to reduce the number of pools without reducing the prediction power. Nevertheless, it is demonstrated that pooling of a reference population can be used as a tool to optimize between cost and accuracy of selection.

Pooled genotyping strategies for the rapid construction of genomic reference populations1

The growing concern with the environment is making important for livestock producers to focus on selection for efficiency-related traits, which is a challenge for commercial cattle herds due to the lack of pedigree information. To explore a cost-effective opportunity for genomic evaluations of commercial herds, this study compared the accuracy of bulls' genomic estimated breeding values (GEBV) using different pooled genotype strategies. We used ten replicates of previously simulated genomic and phenotypic data for one low (t1) and one moderate (t2) heritability trait of 200 sires and 2,200 progeny. Sire's GEBV were calculated using a univariate mixed model, with a hybrid genomic relationship matrix (h-GRM) relating sires to: 1) 1,100 pools of 2 animals; 2) 440 pools of 5 animals; 3) 220 pools of 10 animals; 4) 110 pools of 20 animals; 5) 88 pools of 25 animals; 6) 44 pools of 50 animals; and 7) 22 pools of 100 animals. Pooling criteria were: at random, grouped sorting by t1, grouped sorting by t2, and grouped sorting by a combination of t1 and t2. The same criteria were used to select 110, 220, 440, and 1,100 individual genotypes for GEBV calculation to compare GEBV accuracy using the same number of individual genotypes and pools. Although the best accuracy was achieved for a given trait when pools were grouped based on that same trait (t1: 0.50-0.56, t2: 0.66-0.77), pooling by one trait impacted negatively on the accuracy of GEBV for the other trait (t1: 0.25-0.46, t2: 0.29-0.71). Therefore, the combined measure may be a feasible alternative to use the same pools to calculate GEBVs for both traits (t1: 0.45-0.57, t2: 0.62-0.76). Pools of 10 individuals were identified as representing a good compromise between loss of accuracy (~10%-15%) and cost savings (~90%) from genotype assays. In addition, we demonstrated that in more than 90% of the simulations, pools present higher sires' GEBV accuracy than individual genotypes when the number of genotype assays is limited (i.e., 110 or 220) and animals are assigned to pools based on phenotype. Pools assigned at random presented the poorest results (t1: 0.07-0.45, t2: 0.14-0.70). In conclusion, pooling by phenotype is the best approach to implementing genomic evaluation using commercial herd data, particularly when pools of 10 individuals are evaluated. While combining phenotypes seems a promising strategy to allow more flexibility to the estimates made using pools, more studies are necessary in this regard.

Considerations for Maintaining Family Diversity in Commercially Mass-Spawned Penaeid Shrimp: A Case Study on Penaeus monodon

Skewed family distributions are common in aquaculture species that are highly fecund, communally (mass) spawned, and/or communally reared. The magnitude of skews pose challenges for maintaining family-specific genetic diversity, as increased resources are required to detect individuals from underrepresented families, or reliably determine relative survival as a measure of family performance. There is limited understanding of family skews or changes in family proportion of communally reared shrimp under commercial rearing conditions and particularly how this may affect genotyping strategies to recover family performance data in breeding programs. In this study, three separate batches of shrimp, Penaeus monodon, were communally spawned and reared, and then sampled as larvae when ponds were stocked at 30 days of culture (DOC) and as juveniles from commercial ponds during harvest at 150 DOC. A total of 199 broodstock contributed to the 5,734 progeny that were genotyped with a custom multiplex single nucleotide polymorphism (SNP) panel, and family assignments were cross-referenced using two parentage assignment methods, CERVUS and COLONY. A total of 121 families were detected, with some families contributing up to 11% of progeny at 30 DOC and up to 18% of progeny at harvest. Significant changes were detected for 20% of families from 30 to 150 DOC, with up to a 9% change in relative contribution. Family skew data was applied in several models to determine the optimal sample size to detect families, along with the ability to detect changes in relative family contribution over time. Results showed that an order of magnitude increase in sampling was required to capture the lowest represented 25% of families, as well as significantly improve the accuracy to determine changes in family proportion from 30 to 150 DOC. Practical measures may be implemented at the hatchery to reduce family skews; a cost-effective measure may be to address the initial magnitude differences in viable progeny produced among families, by pooling equal quantities of hatched larvae from each family. This study demonstrates the relationships between skews in families under commercial conditions, the ability to accurately detect families, and the balance of sampling effort and genotyping cost in highly fecund species such as shrimp.

Genomic analyses of tropical beef cattle fertility based on genotyping pools of Brahman cows with unknown pedigree

We introduce an innovative approach to lowering the overall cost of obtaining genomic EBV (GEBV) and encourage their use in commercial extensive herds of Brahman beef cattle. In our approach, the DNA genotyping of cow herds from 2 independent properties was performed using a high-density bovine SNP chip on DNA from pooled blood samples, grouped according to the result of a pregnancy test following their first and second joining opportunities. For the DNA pooling strategy, 15 to 28 blood samples from the same phenotype and contemporary group were allocated to pools. Across the 2 properties, a total of 183 pools were created representing 4,164 cows. In addition, blood samples from 309 bulls from the same properties were also taken. After genotyping and quality control, 74,584 remaining SNP were used for analyses. Pools and individual DNA samples were related by means of a "hybrid" genomic relationship matrix. The pooled genotyping analysis of 2 large and independent commercial populations of tropical beef cattle was able to recover significant and plausible associations between SNP and pregnancy test outcome. We discuss 24 SNP with significant association ( < 1.0 × 10) and mapped within 40 kb of an annotated gene. We have established a method to estimate the GEBV in young herd bulls for a trait that is currently unable to be predicted at all. In summary, our novel approach allowed us to conduct genomic analyses of fertility in 2 large commercial Brahman herds managed under extensive pastoral conditions.

Estimating the genetic merit of sires by using pooled DNA from progeny of undetermined pedigree

Background

DNA-based predictions for hard-to-measure production traits hold great promise for selective breeding programs. DNA pooling might provide a cheap genomic approach to use phenotype data from commercial flocks which are commonly group-mated with parentage unknown. This study on sheep explores if genomic breeding values for stud sires can be estimated from genomic relationships that were obtained from pooled DNA in combination with phenotypes from commercial progeny.

Methods

Phenotypes used in this study were categorical data. Blood was pooled strategically aiming at even pool sizes and within sex and phenotype category. A hybrid genomic relationship matrix was constructed relating pools to sires. This matrix was used to determine the contribution of sires to each of the pools and therefore phenotype category by using a simple regression approach. Genomic breeding values were also estimated using the hybrid genomic relationship matrix.

Results

We demonstrated that, using pooled DNA, the genetic performance of sires can be illustrated as their contribution to phenotype categories and can be expressed as a regression coefficient. Genomic estimated breeding values for sires were equivalent to the regression coefficients and are a commonly used industry tool.

Conclusions

Genotyping of DNA from pooled biological samples offers a cheap method to link phenotypic information from commercial production animals to the breeding population and can be turned into information on the genetic value of stud sires for traits that cannot be measured in the stud environment.

Fluorescence-based bioassays for the detection and evaluation of food materials

We summarize here the recent progress in fluorescence-based bioassays for the detection and evaluation of food materials by focusing on fluorescent dyes used in bioassays and applications of these assays for food safety, quality and efficacy. Fluorescent dyes have been used in various bioassays, such as biosensing, cell assay, energy transfer-based assay, probing, protein/immunological assay and microarray/biochip assay. Among the arrays used in microarray/biochip assay, fluorescence-based microarrays/biochips, such as antibody/protein microarrays, bead/suspension arrays, capillary/sensor arrays, DNA microarrays/polymerase chain reaction (PCR)-based arrays, glycan/lectin arrays, immunoassay/enzyme-linked immunosorbent assay (ELISA)-based arrays, microfluidic chips and tissue arrays, have been developed and used for the assessment of allergy/poisoning/toxicity, contamination and efficacy/mechanism, and quality control/safety. DNA microarray assays have been used widely for food safety and quality as well as searches for active components. DNA microarray-based gene expression profiling may be useful for such purposes due to its advantages in the evaluation of pathway-based intracellular signaling in response to food materials.

Low frequency of Y anomaly detected in Australian Brahman cow-herds

Indicine cattle have lower reproductive performance in comparison to taurine. A chromosomal anomaly characterized by the presence Y markers in females was reported and associated with infertility in cattle. The aim of this study was to investigate the occurrence of the anomaly in Brahman cows. Brahman cows (n = 929) were genotyped for a Y chromosome specific region using real time-PCR. Only six out of 929 cows had the anomaly (0.6%). The anomaly frequency was much lower in Brahman cows than in the crossbred population, in which it was first detected. It also seems that the anomaly doesn't affect pregnancy in the population. Due to the low frequency, association analyses couldn't be executed. Further, SNP signal of the pseudoautosomal boundary region of the Y chromosome was investigated using HD SNP chip. Pooled DNA of "non-pregnant" and "pregnant" cows were compared and no difference in SNP allele frequency was observed. Results suggest that the anomaly had a very low frequency in this Australian Brahman population and had no effect on reproduction. Further studies comparing pregnant cows and cows that failed to conceive should be executed after better assembly and annotation of the Y chromosome in cattle.