Influence of chitosan coating on the liposomal surface on physicochemical properties and the release profile of nanocarrier systems

Chitosan-coated liposomal systems for delivery of antibacterial peptide LL17-32 to Porphyromonas gingivalis

Periodontal disease is triggered by surface bacterial biofilms where bacteria are less susceptible to antibiotic treatment. The development of liposome-based delivery mechanisms for the therapeutic use of antimicrobial peptides is an attractive alternative in this regard. The cationic antimicrobial peptide LL-37 (human cathelicidin) is well-known to exert antibacterial activity against P orphyromonas gingivalis, a keystone oral pathogen. However, the antibacterial activity of the 16-amino acid fragment (LL17-32) of LL-37, is unknown. In addition, there are still gaps in studies using liposomal formulations as delivery vehicles of antibacterial peptides against this pathogen. This study was designed to examine the influence of the different types of liposomal formulations to associate and deliver LL17-32 to act against P. gingivalis. Chitosans of varying Mw and degree of acetylation (DA) were adsorbed at the surface of soya lecithin (SL) liposomes. Their bulk (average hydrodynamic size, ζ-potential and membrane fluidity) and ultrastructural (d-spacing, half-bilayer thickness and the water layer thickness) biophysical properties were investigated by a panel of techniques (DLS, SAXS, M3-PALS, fluorescence spectroscopy and TEM imaging). Their association efficiency, in vitro release, stability, and efficacy in killing the periodontal pathogen P. gingivalis were also investigated. All liposomal systems possessed spherical morphologies and good shelf-life stabilities. Under physiological conditions, chitosan formulations with a high DA demonstrated enhanced stability in comparison to low DA-chitosan formulations. Chitosans and LL17-32 both decreased SL-liposomal membrane fluidity. LL17-32 exhibited a high degree of association with SL-liposomes without in vitro release. In biological studies, free LL17-32 or chitosans alone, demonstrated microbicidal activity against P. gingivalis, however this was attenuated when LL17-32 was loaded onto the SL-liposome delivery system, presumably due to the restrained release of the peptide. A property that could be harnessed in future studies (e.g., oral mucoadhesive slow-release formulations).

Unveiling the potential of chitosan-coated lipid nanoparticles in drug delivery for management of critical illness: a review

Chitosan (CT), a natural, cationic, chemically stable molecule, biocompatible, biodegradable, nontoxic, polysaccharide derived from the deacetylation of chitin, has very uniquely surfaced as a material of promise for drug delivery and biomedical applications. For the oral, ocular, cutaneous, pulmonary, and nose-to-brain routes, CT-coated nanoparticles (CTCNPs) have numerous advantages, consisting of improved controlled drug release, physicochemical stability, improved cell and tissue interactions, and increased bioavailability and efficacy of the active ingredient. CTCNPs have a broad range of therapeutic properties including anticancer, antiviral, antifungal, anti-inflammatory, antibacterial properties, treating neurological disorders, and other diseases. This has led to substantial research into the many potential uses of CT as a drug delivery vehicle. CT has also been employed in a wide range of biomedical processes, including bone and cartilage tissue regeneration, ocular tissue regeneration, periodontal tissue regeneration, heart tissue regeneration, and wound healing. Additionally, CT has been used in cosmeceutical, bioimaging, immunization, and gene transfer applications. CT exhibits a number of biological activities, which are the basis for its remarkable potential for use as a drug delivery vehicle, and these activities are covered in detail in this article. The alterations applied to CT to obtain the necessary properties have been described.

Chitosan-coated nanoparticles in innovative cancer bio-medicine

In the recent decade, nanoparticles (NPs) have had enormous implications in cancer biomedicine, including research, diagnosis, and therapy. However, their broad application still faces obstacles due to some practical limitations and requires further development. Recently, there has been more interest in the coated class of nanoparticles to address those challenges. Chitosan-coated NPs are simple to produce, biodegradable, biocompatible, exhibit antibacterial activity, and have less cytotoxicity. This study provides an updated and comprehensive overview of the application of chitosan-coated NPs as a promising class of NPs in cancer biomedicine. Additionally, we discussed chitosan-coated lipid, metal, and polymer-based nanoparticles in biomedical applications. Furthermore, different coating methods and production/characterization procedures were reviewed. Moreover, the biological and physicochemical advantages of chitosan-coated NPs, including facilitated controlled release, greater physicochemical stability, improved cell/tissue interaction, and enhanced bioavailability of medications, were highlighted. Finally, the prospects of chitosan-coated NPs in cancer biomedicine were discussed.

Application of nanopesticides and its toxicity evaluation through Drosophila model

Insects feed on plants and cause the growth of plants to be restricted. Moreover, the application of traditional pesticides causes harmful effects on non-target organisms and poses serious threats to the environment. The use of conventional pesticides has negative impacts on creatures that are not the intended targets. It also presents significant risks to the surrounding ecosystem. Insects that are exposed to these chemicals eventually develop resistance to them. This review could benefit researcher for future development of nanopesticides research. This is because a holistic approach has been taken to describe the multidimensional properties of nanopesticides, health and environmental concerns and its possible harmful effects on non-target organisms and physiochemical entities. The assessment of effects of the nanopesticides is also being discussed through the drosophotoxicology. The future outlooks have been suggested to take a critical analysis before commercialization or formulation of the nanopesticides.

Enhanced Insecticidal Effect and Interface Behavior of Nicotine Hydrochloride Solution by a Vesicle Surfactant

Nicotine hydrochloride (NCT) has a good control effect on hemiptera pests, but its poor interfacial behavior on the hydrophobic leaf leads to few practical applications. In this study, a vesicle solution by the eco-friendly surfactant, sodium diisooctyl succinate sulfonate (AOT), was prepared as the pesticide carrier for NCT. The physical chemical properties of NCT-loaded AOT vesicles (NCT/AOT) were investigated by techniques such as dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM). The results showed that the pesticide loading and encapsulation efficiency of NCT/AOT were 10.6% and 94.8%, respectively. The size of NCT/AOT vesicle was about 177 nm. SAXS and surface tension results indicated that the structure of the NCT/AOT vesicle still existed with low surface tension even after being diluted 200 times. The contact angle of NCT/AOT was always below 30°, which means it could wet the surface of the cabbage leaf well. Consequently, NCT/AOT vesicles could effectively reduce the bounce of pesticide droplets. In vitro release experiments showed that NCT/AOT vesicles had sustained release properties; 60% of NCT in NCT/AOT released after 24 h, and 80% after 48 h. Insecticidal activity assays against aphids revealed that AOT vesicles exhibited insecticidal activity and could have a synergistic insecticidal effect with NCT after the loading of NCT. Thus, the NCT/AOT vesicles significantly improved the insecticidal efficiency of NCT, which has potential application in agricultural production activities.

Nanopesticides in Agriculture: Benefits and Challenge in Agricultural Productivity, Toxicological Risks to Human Health and Environment

Nanopesticides are nanostructures with two to three dimensions between 1 to 200 nm, used to carry agrochemical ingredients (AcI). Because of their unique properties, the loading of AcI into nanoparticles offers benefits when compared to free pesticides. However, with the fast development of new engineered nanoparticles for pests' control, a new type of environmental waste is being produced. This paper describes the nanopesticides sources, the harmful environmental and health effects arising from pesticide exposure. The potential ameliorative impact of nanoparticles on agricultural productivity and ecosystem challenges are extensively discussed. Strategies for controlled release and stimuli-responsive systems for slow, sustained, and targeted AcI and genetic material delivery are reported. Special attention to different nanoparticles source, the environmental behavior of nanopesticides in the crop setting, and the most recent advancements and nanopesticides representative research from experimental results are revised. This review also addresses some issues and concerns in developing, formulating and toxicity pesticide products for environmentally friendly and sustainable agriculture.

Formulation of chitosan coated nanoliposomes for the oral delivery of colistin sulfate: in vitro characterization, 99mTc-radiolabeling and in vivo biodistribution studies

Colistin sulfate is a very important antibiotic for the treatment of multidrug-resistant Gram-negative infections. Unfortunately, it has low oral bioavailability and several side effects following parenteral administration. The present study aims to develop chitosan-coated colistin nanoliposomes to improve the stability in the gastrointestinal tract and to enhance the oral delivery of colistin. The chitosan-coated colistin nanoliposomes were obtained via thin-film evaporation and electrostatic deposition methods using either Span 60, Tween 65 or Tween 80 as surfactants with different cholesterol: surfactant: soya lecithin ratios. The influence of systems variables was further characterized by vesicle size analysis, zeta potential (ZP), poly dispersibility index (PDI), and also their entrapment efficiency percentage (EE %) was evaluated. Various systems were formed with vesicle sizes in the nano-range, 155.64 ± 12.53 nm to 315.64 ± 15.90 nm, and EE % of 45.2 ± 2.9% to 81.8 ± 2.9%. Moreover, the ZP value of the prepared nanoliposomes switched from a negative to a positive value after chitosan coating. To track the released colistin in vivo, technetium 99m (^99mTc) was incorporated into the optimum system (S-3) system via direct coupling with colistin. Chitosan-coated ^99mTc-colistin nanoliposome, ^99mTc-colistin suspension, and ^99mTc-chitosan-coated nanoliposomes (placebo) were administered orally into bacterial infection (Escherichia coli) bearing mice. The biodistribution results showed that chitosan-coated nanoliposome significantly enhanced the bioavailability of colistin compared to colistin suspension (the commercially available). Moreover, the system effectively improved the localization of colistin at the infected muscle. In conclusion, this approach offers a promising tool for enhanced oral delivery of colistin.

Glycomacromolecules: Addressing challenges in drug delivery and therapeutic development

Carbohydrate-based materials offer exciting opportunities for drug delivery. They present readily available, biocompatible components for the construction of macromolecular systems which can be loaded with cargo, and can enable targeting of a payload to particular cell types through carbohydrate recognition events established in biological systems. These systems can additionally be engineered to respond to environmental stimuli, enabling triggered release of payload, to encompass multiple modes of therapeutic action, or to simultaneously fulfil a secondary function such as enabling imaging of target tissue. Here, we will explore the use of glycomacromolecules to deliver therapeutic benefits to address key health challenges, and suggest future directions for development of next-generation systems.

Nanosystems for the Encapsulation of Natural Products: The Case of Chitosan Biopolymer as a Matrix

Chitosan is a cationic natural polysaccharide, which has emerged as an increasingly interesting biomaterialover the past few years. It constitutes a novel perspective in drug delivery systems and nanocarriers' formulations due to its beneficial properties, including biocompatibility, biodegradability and low toxicity. The potentiality of chemical or enzymatic modifications of the biopolymer, as well as its complementary use with other polymers, further attract the scientific community, offering improved and combined properties in the final materials. As a result, chitosan has been extensively used as a matrix for the encapsulation of several valuable compounds. In this review article, the advantageous character of chitosan as a matrix for nanosystemsis presented, focusing on the encapsulation of natural products. A five-year literature review is attempted covering the use of chitosan and modified chitosan as matrices and coatings for the encapsulation of natural extracts, essential oils or pure naturally occurring bioactive compounds are discussed.

Quercetin-Loaded Solid Lipid Nanoparticle Dispersion with Improved Physicochemical Properties and Cellular Uptake

The objective of this study was to formulate and characterize properties of solid lipid nanoparticle (SLN) dispersion containing quercetin. SLN was prepared by ultrasonication method using tripalmitin and lecithin as lipid core and then the surface was coated with chitosan. Entrapment efficiency was greater than 99%, and mean particle size of SLN was 110.7 ± 1.97 nm with significant increase in the coated SLN (c-SLN). Zeta potential was proportionally increased and reached plateau at 5% of chitosan coating with respect to tripalmitin. Differential scanning calorimetry showed disappearance of endothermic peak of quercetin in SLNs, indicating conversion of crystalline state to amorphous state. FTIR study of SLNs showed no change in the spectrum of quercetin, which indicates that the lipid and chitosan were not incompatible with quercetin. When coating amount was greater than 2.5% of tripalmitin, particle size and zeta potential were very stable even at 40°C up to 90 days. All SLN dispersions showed significantly faster release profile compared to pure quercetin powder. At pH 7.0, the release rate was increased in proportion to the coating amount. Interestingly, at pH 3.0, chitosan coating of 5.0% or greater decreased the rate. Cellular uptake of quercetin was performed using Caco-2 cells and showed that all SLN dispersions were significantly better than quercetin dispersed in distilled water. However, cellular uptake of quercetin from c-SLN was significantly lower than that from uncoated SLN.

Microencapsulação do pesticida cipermetrina em blendas de P(3HB/PCL): caracterização e ensaio de liberação in vitro

Resumo A aplicação de polímeros biodegradáveis para encapsular pesticidas é uma estratégia que permite, a partir de diferentes proporções entre os polímeros, modificar o perfil de liberação do agente. Este trabalho avaliou a liberação controlada do pesticida cipermetrina encapsulado em microesferas de blendas de P(3HB)/PCL (100/0, 0/100, 97/03, 95/05, 90/10, 80/20 e 70/30) obtidas pelo método de emulsificação-evaporação do solvente. As imagens de microscopia eletrônica de varredura revelam a forte influência da PCL na porosidade das microesferas. As análises de infravermelho mostraram a presença do pesticida em todas as composições de polímeros avaliadas. O ensaio de liberação de cipermetrina sugere que, no intervalo de 4 horas, o teor de cipermetrina liberada é dependente da composição das blendas utilizadas. As microesferas de PHB e blendas com menores teores de PCL, 97/03 e 95/05 liberaram 75% a 85% enquanto a composição 70/30 liberou 100% de cipermetrina.

Novel pH-sensitive drug carriers of carboxymethyl-hexanoyl chitosan (Chitosonic® Acid) modified liposomes

Chitosonic® Acid modified liposomes as a novel drug carrier displayed pH-sensitive, drug controlled release character and a good cellular internalization.

Chitosan-coated nano-liposomes for the oral delivery of berberine hydrochloride

Berberine hydrochloride (BH) possesses various pharmacological properties including anticancer; unfortunately, it has low oral bioavailability and potential side effects for its parenteral administration. Nanoscale delivery carriers can increase the oral bioavailability of BH. Chitosan has interesting biopharmaceutical properties such as nontoxicity, biocompatibility, biodegradability, and mucoadhesiveness, and the ability to open epithelial tight junctions. This study aims to engineer a chitosan-coated nano-liposomal carrier for the oral delivery of BH. The engineered formulation had a size in the nanoscale range. Chitosan-coated nano-liposomes displayed better stability and slower BH release in the simulated gastrointestinal (GI) environment as compared to the uncoated ones. All values of pharmacokinetic analysis for chitosan-coated nano-liposomes were higher than for uncoated ones. These findings demonstrate that chitosan-coated nano-liposomes are more efficient than uncoated ones for the oral delivery of BH. It can be concluded that the stability and delayed BH release in the simulated GI environment were improved with engineered chitosan-coated nano-liposomes. Moreover, since desirable in vitro and in vivo characteristics were achieved, they are promising release devices for the oral delivery of BH increasing the bioavailability of the drug.

Mucosa-plate for direct evaluation of mucoadhesion of drug carriers

The method to prepare mucosa-plates, glass slides covalently coated with mucin, is demonstrated. The use of the plate to evaluate mucoadhesion of nanocarriers made from different four polymeric materials, N-succinylchitosan (NS-chitosan), alginate (ALG), ethylcellulose (EC), and a blend of EC and methylcellulose (EC/MC), was demonstrated. While different mucoadhesion of the four carriers could be detected using mucosa-plate, the conventional viscosity measurement could not differentiate their mucin-binding ability. ALG and NS-chitosan nanospheres showed the best attachment to the mucosa-plate compared to the EC/MC and EC spheres. Capsaicin, a model hydrophobic drug, was loaded into the carriers and the ability of the different polymeric carriers to retain capsaicin at the stomach tissue was compared using an ex vivo fresh porcine stomach assay. Ability to retain capsaicin at the stomach tissue correlated well with binding affinity toward the mucosa-plate and the loading capacity of the carriers.