Microencapsulation of Lactococcus lactis subsp. cremoris

Insights from Syzygium aromaticum Essential Oil: Encapsulation, Characterization, and Antioxidant Activity

Alginate encapsulates loaded with clove essential oil (CEO) were prepared by ionic gelation, with subsequent freeze-drying. The objective of the present work was to develop a product with the ability to protect CEO against its easy volatility and oxidation. The following techniques were used to characterize the formulations: eugenol release, degree of swelling, GC/MS, TGA/DSC, and SEM. The alginate solution (1.0%) containing different concentrations of CEO (LF1: 1.0%; LF2: 0.5%; LF3: 0.1%) was dropped into a 3.0% CaCl2 solution. After lyophilization, the encapsulated samples were wrinkled and rigid, with high encapsulation power (LF3: 76.9% ± 0.5). Three chemical components were identified: eugenol (the major one), caryophyllene, and humulene. The antioxidant power (LF1: DPPH IC50 18.1 µg mL-1) was consistent with the phenol content (LF1: 172.2 mg GAE g-1). The encapsulated ones were thermally stable, as shown by analysis of FTIR peaks, eugenol molecular structure was kept unaltered. The degree of swelling was 19.2% (PBS). The release of eugenol (92.5%) in the PBS solution was faster than in the acidic medium. It was concluded that the low-cost technology used allows the maintenance of the content and characteristics of CEO in the three concentrations tested, offering a basis for further research with essential oil encapsulates.

Enrichment of set yoghurt with flaxseed oil, flaxseed mucilage and free or encapsulated Lacticaseibacillus casei: Effect on probiotic survival and yoghurt quality attributes

This study was intended to develop yoghurt products incorporated with flaxseed mucilage (FM), flaxseed oil (FO) and free or encapsulated Lacticaseibacillus casei probiotics. FM (0.9%) and sodium alginate (2%) were used as wall materials for encapsulating L. casei. Different physicochemical and sensory properties of the yoghurt, as well as the L. casei survival, were determined during 21 days of storage at 4 °C. Based on the results, FM showed a stimulatory effect on the growth of probiotics and thus, significantly decreased the Log reduction of the probiotics during storage (P < 0.05). Moreover, encapsulating probiotics significantly decreased the Log reduction during storage in comparison with the free bacteria (P < 0.05). Incorporating FM and free probiotics significantly increased the acidity and decreased the pH of the samples; while encapsulating L. casei successfully prevented the acidity increment in probiotic fortified yoghurt products (P < 0.05). The addition of FM significantly improved the water holding capacity of the yoghurt (P < 0.05). Incorporating either free L. casei, FO or FM significantly reduced the flavor and overall acceptance scores; while, the addition of L. casei in the encapsulated form did not significantly alter the overall acceptance scores of the yoghurt samples (P < 0.05).

Preparation and Characteristics of Alginate Microparticles for Food, Pharmaceutical and Cosmetic Applications

Alginates are the most widely used natural polymers in the pharmaceutical, food and cosmetic industries. Usually, they are applied as a thickening, gel-forming and stabilizing agent. Moreover, the alginate-based formulations such as matrices, membranes, nanospheres or microcapsules are often used as delivery systems. Alginate microparticles (AMP) are biocompatible, biodegradable and nontoxic carriers, applied to encapsulate hydrophilic active substances, including probiotics. Here, we report the methods most frequently used for AMP production and encapsulation of different actives. The technological parameters important in the process of AMP preparation, such as alginate concentration, the type and concentration of other reagents (cross-linking agents, oils, emulsifiers and pH regulators), agitation speed or cross-linking time, are reviewed. Furthermore, the advantages and disadvantages of alginate microparticles as delivery systems are discussed, and an overview of the active ingredients enclosed in the alginate carriers are presented.

Encapsulation of Human-Bone-Marrow-Derived Mesenchymal Stem Cells in Small Alginate Beads Using One-Step Emulsification by Internal Gelation: In Vitro, and In Vivo Evaluation in Degenerate Intervertebral Disc Model

Cell microencapsulation in gel beads contributes to many biomedical processes and pharmaceutical applications. Small beads (<300 µm) offer distinct advantages, mainly due to improved mass transfer and mechanical strength. Here, we describe, for the first time, the encapsulation of human-bone-marrow-derived mesenchymal stem cells (hBM-MSCs) in small-sized microspheres, using one-step emulsification by internal gelation. Small (127−257 µm) high-mannuronic-alginate microspheres were prepared at high agitation rates (800−1000 rpm), enabling control over the bead size and shape. The average viability of encapsulated hBM-MSCs after 2 weeks was 81 ± 4.3% for the higher agitation rates. hBM-MSC-loaded microspheres seeded within a glycosaminoglycan (GAG) analogue, which was previously proposed as a mechanically equivalent implant for degenerate discs, kept their viability, sphericity, and integrity for at least 6 weeks. A preliminary in vivo study of hBM-MSC-loaded microspheres implanted (via a GAG-analogue hydrogel) in a rat injured intervertebral disc model demonstrated long-lasting viability and biocompatibility for at least 8 weeks post-implantation. The proposed method offers an effective and reproducible way to maintain long-lasting viability in vitro and in vivo. This approach not only utilizes the benefits of a simple, mild, and scalable method, but also allows for the easy control of the bead size and shape by the agitation rate, which, overall, makes it a very attractive platform for regenerative-medicine applications.

Weissella paramesenteroides encapsulation and its application in the use of fish waste

The goal of the present study was to evaluate the encapsulation of Weissella paramesenteroides, isolated from bee bread, as a technological tool for its use in biological fish silage. The pH decrease in fish silages using the bacteria encapsulated and in a non-encapsulated form was compared. W. paramesenteroides showed a good performance in the development of biological fish silage. The alginate encapsulation method showed an encapsulation efficacy of 85% and provides a reliable technological application.

Mammalian Cell Encapsulation in Alginate Beads Using a Simple Stirred Vessel

Cell encapsulation in alginate beads has been used for immobilized cell culture in vitro as well as for immunoisolation in vivo. Pancreatic islet encapsulation has been studied extensively as a means to increase islet survival in allogeneic or xenogeneic transplants. Alginate encapsulation is commonly achieved by nozzle extrusion and external gelation. Using this method, cell-containing alginate droplets formed at the tip of nozzles fall into a solution containing divalent cations that cause ionotropic alginate gelation as they diffuse into the droplets. The requirement for droplet formation at the nozzle tip limits the volumetric throughput and alginate concentration that can be achieved. This video describes a scalable emulsification method to encapsulate mammalian cells in 0.5% to 10% alginate with 70% to 90% cell survival. By this alternative method, alginate droplets containing cells and calcium carbonate are emulsified in mineral oil, followed by a decrease in pH leading to internal calcium release and ionotropic alginate gelation. The current method allows the production of alginate beads within 20 min of emulsification. The equipment required for the encapsulation step consists in simple stirred vessels available to most laboratories.

Development of microencapsulation delivery system for long-term preservation of probiotics as biotherapeutics agent

The administration of probiotic bacteria for health benefit has rapidly expanded in recent years, with a global market worth $32.6 billion predicted by 2014. The oral administration of most of the probiotics results in the lack of ability to survive in a high proportion of the harsh conditions of acidity and bile concentration commonly encountered in the gastrointestinal tract of humans. Providing probiotic living cells with a physical barrier against adverse environmental conditions is therefore an approach currently receiving considerable interest. Probiotic encapsulation technology has the potential to protect microorganisms and to deliver them into the gut. However, there are still many challenges to overcome with respect to the microencapsulation process and the conditions prevailing in the gut. This review focuses mainly on the methodological approach of probiotic encapsulation including biomaterials selection and choice of appropriate technology in detailed manner.

Microencapsulated probiotics using emulsification technique coupled with internal or external gelation process

Alginate-chitosan microcapsules containing probiotics (Yeast, Y235) were prepared by emulsification/external gelation and emulsification/internal gelation techniques respectively. The gel beads by external gelation showed asymmetrical structure, but those by internal gelation showed symmetrical structure in morphology. The cell viability was approximately 80% for these two techniques. However, during cell culture process, emulsification/internal gelation microcapsules showed higher cell growth and lower cell leakage. Moreover, the survival rate of entrapped low density cells with culture (ELDCwc) increased obviously than that directly entrapped high density cells (dEHDC) and free cells when keeping in simulated gastrointestinal conditions. It indicated the growth process of cells in microcapsule was important and beneficial to keep enough active probiotics under harmful environment stress. Therefore, the emulsification/internal gelation technique was the preferred method for application in food or biotechnological industries.

Review and current status of emulsion/dispersion technology using an internal gelation process for the design of alginate particles

Emulsification/internal gelation has been suggested as an alternative to extrusion/external gelation in the encapsulation of several compounds including sensitive biologicals such as protein drugs. Protein-loaded microparticles offer an inert environment within the matrix and encapsulation is conducted at room temperature in a media free of organic solvents. Recently, the concept of internal gelation has been applied to formulating nanoparticles as drug delivery systems. Emulsification/internal gelation technologies available for microparticles preparation, particularly that involving alginate polymer, are described as well as recent advances towards applications in nanotechnology. Those methods show great promise as a tool for the development of encapsulation processes, especially for the new field of nanotechnology using natural polymers.

Chitosan-reinforced alginate microspheres obtained through the emulsification/internal gelation technique

Alginate microspheres prepared by emulsification/internal gelation were chosen as carriers for a model protein, hemoglobin (Hb). Reinforced chitosan-coated microspheres were obtained by an uninterrupted method, in order to simplify the coating process, minimize protein losses during production and to avoid Hb escape under acidic conditions. Microspheres recovery was evaluated as well as its morphology by determination of Hb encapsulation efficiency and microscopic observation, respectively. The formation of chitosan membrane made of it interaction with alginate was assessed by DSC (differential scanning calorimetry) and FT-IR (Fourier-transform infrared spectrometry) studies. Spherical uncoated microspheres with a mean diameter of 20 microm and encapsulation efficiency above 89% were obtained. Coated microspheres provided similar encapsulation efficiency but a higher mean diameter was obtained due to microspheres clumping during the coating step. Protein loss occurred mainly during emulsification rather than recovery. FT-IR and DSC together indicated electrostatic interactions between alginate carboxylate and chitosan ammonium groups as the main forces for complex formation. Hb release from microspheres showed a pH-dependent profile and was affected by chitosan coating. Under simulated gastric conditions, a total Hb burst release from uncoated microspheres was decreased with one-stage and two-stage chitosan coatings (68% and 28%, respectively). At pH 6.8, the Hb release from coated microspheres was fast but incomplete. These results suggest an optimization of the coating method to protect Hb under acidic conditions and to permit a complete but sustained release of Hb.

Design and facile synthesis of neoglycolipids as lactosylceramide mimetics and their transformation into glycoliposomes

Neoglycolipids composed of disaccharide glycoside and phospholipid were designed and prepared as mimetics of lactosylceramide. The lactosyl- and N-acetyllactosaminyl-phospholipids (Lac-DPPA and LacNAc-DPPA) were enzymatically synthesized from lactose and LacNAc respectively by cellulase-mediated condensation with 1,6-hexanediol, followed by conjugation of the resulting glycosides and dipalmitoylphosphatidyl choline (DPPC) mediated by Streptomyces phospholipase D. Alternatively, allyl beta-lactoside was ozonolyzed to give an aldehyde, which was condensed with dipalmytoyl phosphatidyl ethanolamine to afford a second type of glycolipid (Lac-DPPE). NMR spectroscopy indicated that the neoglycolipids behave differently in different solvent systems. X-ray diffraction clearly showed that multilamellar vesicles (MLVs) of Lac-DPPE and Lac-DPPA-MLV are in the bilayer gel phase at 20 degrees C, whereas those of Lac-DPPE-MLV were in the lamellar liquid-crystalline phase at 50 degrees C. Differential scanning calorimetry showed that Lac-DPPE-MLV had complex thermotropic behavior depending on the incubation conditions. After a long incubation at 10 degrees C, endothermic transitions are observed at 39.6, 42.3 degrees C, and 42.9 degrees C. These neoglycolipids have the ability to trap calcein, a chelating derivative of fluorescein, in MLVs and showed specific binding to lectin in plate assays using fluorescently labeled compounds.

An improved method of microencapsulation and its evaluation to protect Lactobacillus spp. in simulated gastric conditions

An improved method of microencapsulation was developed to increase the efficacy of capsules in protecting the encapsulated bacteria under simulated gastric conditions. Lactobacillus acidophilus CSCC 2400 was encapsulated in calcium alginate and tested for its survival in simulated gastric conditions. The effects of different capsule sizes (200, 450, 1000 microm), different sodium alginate concentrations (0.75%, 1%, 1.5%, 1.8% and 2% w/v) and different concentrations of calcium chloride (0.1, 0.2, 1.0 M) on the viability of encapsulated bacteria were investigated. The viability of the cells in the microcapsules increased with an increase in alginate capsule size and gel concentration. There was no significant difference (p>0.05) in the viability of encapsulated cells when the concentration of calcium chloride was increased. Increase in cell load during encapsulation increased the number of bacterial survivors at the end of 3-h incubation in simulated gastric conditions. Hardening the capsule in calcium chloride solution for a longer time (8 h) had no impact on increasing the viability of encapsulated bacteria in a simulated gastric environment. The release of encapsulated cells at different phosphate buffer concentrations was also studied. When encapsulated L. acidophilus CSCC 2400 and L. acidophilus CSCC 2409 were subjected to low pH (pH 2) and high bile concentration (1.0% bile) under optimal encapsulation conditions (1.8% (w/v) alginate, 10(9) CFU/ml, 30 min hardening in 0.1 M CaCl(2) and capsule size 450 microm), there was a significant increase (p<0.05) in viable cell counts, compared to the free cells under similar conditions. Thus the encapsulation method described in this study may be effectively used to protect the lactobacillus from adverse gastric conditions.

Encapsulation of probiotic bacteria with alginate-starch and evaluation of survival in simulated gastrointestinal conditions and in yoghurt

A modified method using calcium alginate for the microencapsulation of probiotic bacteria is reported in this study. Incorporation of Hi-Maize starch (a prebiotic) improved encapsulation of viable bacteria as compared to when the bacteria were encapsulated without the starch. Inclusion of glycerol (a cryo-protectant) with alginate mix increased the survival of bacteria when frozen at -20 degrees C. The acidification kinetics of encapsulated bacteria showed that the rate of acid produced was lower than that of free cultures. The encapsulated bacteria, however, did not demonstrate a significant increase in survival when subjected to in vitro high acid and bile salt conditions. A preliminary study was carried out in order to monitor the effects of encapsulation on the survival of Lactobacillus acidophilus and Bifidobacterium spp. in yoghurt over a period of 8 weeks. This study showed that the survival of encapsulated cultures of L. acidophilus and Bifidobacterium spp. showed a decline in viable count of about 0.5 log over a period of 8 weeks while there was a decline of about 1 log in cultures which were incorporated as free cells in yoghurt. The encapsulation method used in this study did not result in uniform bead size, and hence additional experiments need to be designed using uniform bead size in order to assess the role of different encapsulation parameters, such as bead size and alginate concentration, in providing protection to the bacteria.

Production of BCG alginate-PLL microcapsules by emulsification/internal gelation

A biocompatible emulsification method for microencapsulation of live cells and enzymes within a calcium alginate matrix applied to Bacillus Calmette-Guérin (BCG) has been developed. Small-diameter alginate beads (microcapsules) were formed via internal gelation of an alginate solution emulsified within vegetable oil. Five different oils (sesame, sweet almond, perhydrosqualene, camomile and jojoba) were used. The rheological analysis of the oils showed a Newtonian behaviour, with viscosities = 30.0, 37.7, 51.2, 59.3 and 67.1 mPa.s for perhydrosqualene, jojoba, camomile, sesame and sweet almond oil respectively. The particle size of the microcapsules obtained ranged from 30.3 microns for the microcapsules prepared with sweet almond oil to 57.0 microns for those made with perhydrosqualene. The mean particle diameter obtained was found to be dependent on the viscosity of the oil employed, according to the equation: phi (micron) = 76.6-0.628 eta (mPa.s) (r2 = 0.943). The encapsulated BCG was identified by the Difco TB stain set K, followed by observation under optical microscopy. Freeze-drying of the microcapsules was carried out to ensure their stability during storage. Two batches of microcapsules (those prepared with sesame and jojoba oil) and four types of cryoprotectors (glucose, trehalose, mannitol and sorbitol), at three concentration levels (5, 10 and 20% w/v) were studied. The parameters evaluated were particle size, physical appearance, reconstitution of lyophilizates and microscopical evaluation. For both batches of microcapsules the best results were obtained with trehalose 5%, showing particle sizes of 42.1 microns in the case of the microcapsules prepared with sesame oil, and of 45.3 microns for those prepared with jojoba.