In vitro spatially organizing the differentiation in individual multicellular stem cell aggregates

Preparation of astrocytes by directed differentiation of pluripotent stem cells and somatic cell transdifferentiation

Astrocytes (ACs) are the most widely distributed cells in the mammalian central nervous system, which are essential for the function and homeostasis of nervous system. Increasing evidence indicates that ACs also participate in the development of many neurological diseases and repair after nerve injury. ACs cultured in vitro provide a cellular model for studying astrocytic development, function, and the pathogenesis of associated diseases. The preparation of primary ACs (pACs) faces many limitations, so it is important to obtain high-quality ACs by the differentiation of pluripotent stem cell (PSC) or somatic cell transdifferentiation. Initially, researchers mainly tried to induce embryonic stem cells to differentiate into ACs via embryoid body (EB) and then turned to employ induced PSCs as seed cells to explore more simple and efficient directed differentiation strategies, and serum-free culture was delved to improve the quality of induced ACs. While exploring the induction of ACs by the overexpression of AC-specific transcription factors, researchers also began to investigate small molecule-mediated somatic cell transdifferentiation. Here, we provide an updated review on the research progresses in this field.

Effects of Cells Self-aggregation in the Treatment of Neurogenic Erectile Dysfunction With Traditional Single Cell Suspension of Adipose-derived Stem Cells

OBJECTIVE

To clarify the effects of cellular self-aggregation of adipose-derived stem cells (ADSCs) on erectile function (EF).

METHODS

A model of neurogenic erectile dysfunction was performed using bilateral cavernous nerve crush injury in rats. ADSCs suspensions (1 × 10⁶/0.2 ml), were administered via intracavernous injection (ICI) after being allowed to shelve for 0 minute (ICI 0) or 60 minutes (ICI 60) in vitro, as well as cell aggregates isolated from ICI 60 (ICI A). The caudal vein injection group (CVI 60) was used to evaluate whether cell self-aggregation was beneficial to EF when introduced into the peripheral circulation. One day after the transplantation, the distribution of cells was observed. EF and histopathological changes were evaluated after 4 weeks.

RESULTS

Approximately 85% of ADSCs self-aggregated into cell clusters at 60 minutes. The ICI 60 had more significant improvements in EF and more visualized ADSCs retained in the corpus cavernosum (CC) than ICI 0 and CVI 60 (P <.05), but no significant difference between ICI 60 and ICI A. In the CVI 60 group, the cell clusters formed by self-aggregation could hardly reach the CC and were mostly found in lung tissue. Immunofluorescence staining showed increased the content of expressing biomarkers of smooth muscle, nerve within the CC tissue in the ICI groups when compared to the CVI group.

CONCLUSION

ADSCs self-aggregation before ICI may be an influential factor in the treatment of neurogenic erectile dysfunction. Its potential mechanism may be through improving cell retention in the CC.

Fabrication of 2D and 3D Cell Cluster Arrays Using a Cell-Friendly Photoresist

Cells in 3D behave differently than cells in 2D. We develop a new method for the fabrication of 2D and 3D cell cluster arrays on an identical substrate using a cell-friendly photoresist, which enables comparative study between cells in 2D and 3D cell clusters. The fabricated cell cluster arrays maintain their structure up to 3 days with good viability. Using this method, 2D and 3D cancer cell clusters with comparable sizes are fabricated, and natural killer (NK) cell cytotoxicity assays are performed to assess how dimensionality of cancer cell clusters influence their susceptibility to immune cell-mediated killing.

Photobiomodulation with a wavelength > 800 nm induces morphological changes in stem cells within otic organoids and scala media of the cochlea

Photobiomodulation (PBM) is a therapeutic approach to certain diseases based on light energy. Currently, stem cells (SCs) are being considered as putative treatments for previously untreatable diseases. One medical condition that could be treated using SCs is sensorineural hearing loss. Theoretically, if properly delivered and differentiated, SCs could replace lost hair cells in the cochlea. However, this is not currently possible due to the structural complexity and limited survival of SCs within the cochlea. PBM facilitates SC differentiation into other target cells in multiple lineages. Using light with a wavelength > 800 nm, which can penetrate the inner ear through the tympanic membrane, we assessed morphological changes of mouse embryonic stem cells (mESCs) during "otic organoid" generation, and within the scala media (SM) of the cochlea, after light energy stimulation. We observed enhanced differentiation, which was confirmed by an increased number of otic vesicles and increased cell attachment inside the SM. These results suggest that > 800-nm light affected the morphology of mESCs within otic organoids and SM of the cochlea. Based on our results, light energy could be used to enhance otic sensory differentiation, despite the structural complexity of the inner ear and limited survival time of SCs within the cochleae. Additional studies to refine the light energy delivery technology and maximize the effect on otic differentiation are required.

Metastasis-on-a-chip mimicking the progression of kidney cancer in the liver for predicting treatment efficacy

Metastasis is one of the most important factors that lead to poor prognosis in cancer patients, and effective suppression of the growth of primary cancer cells in a metastatic site is paramount in averting cancer progression. However, there is a lack of biomimetic three-dimensional (3D) in vitro models that can closely mimic the continuous growth of metastatic cancer cells in an organ-specific extracellular microenvironment (ECM) for assessing effective therapeutic strategies. Methods: In this metastatic tumor progression model, kidney cancer cells (Caki-1) and hepatocytes (i.e., HepLL cells) were co-cultured at an increasing ratio from 1:9 to 9:1 in a decellularized liver matrix (DLM)/gelatin methacryloyl (GelMA)-based biomimetic liver microtissue in a microfluidic device. Results:Via this model, we successfully demonstrated a linear anti-cancer relationship between the concentration of anti-cancer drug 5-Fluorouracil (5-FU) and the percentage of Caki-1 cells in the co-culture system (R2 = 0.89). Furthermore, the Poly(lactide-co-glycolide) (PLGA)-poly(ethylene glycol) (PEG)-based delivery system showed superior efficacy to free 5-FU in killing Caki-1 cells. Conclusions: In this study, we present a novel 3D metastasis-on-a-chip model mimicking the progression of kidney cancer cells metastasized to the liver for predicting treatment efficacy. Taken together, our study proved that the tumor progression model based on metastasis-on-a-chip with organ-specific ECM would provide a valuable tool for rapidly assessing treatment regimens and developing new chemotherapeutic agents.

Cell Death Persists in Rapid Extrusion of Lysis-Resistant Coated Cardiac Myoblasts

As the demand for organ transplants continues to grow faster than the supply of available donor organs, a new source of functional organs is needed. High resolution high throughput 3D bioprinting is one approach towards generating functional organs for transplantation. For high throughput printing, the need for increased print resolutions (by decreasing printing nozzle diameter) has a consequence: it increases the forces that cause cell damage during the printing process. Here, a novel cell encapsulation method provides mechanical protection from complete lysis of individual living cells during extrusion-based bioprinting. Cells coated in polymers possessing the mechanical properties finely-tuned to maintain size and shape following extrusion, and these encapsulated cells are protected from mechanical lysis. However, the shear forces imposed on the cells during extrusion still cause sufficient damage to compromise the cell membrane integrity and adversely impact normal cellular function. Cellular damage occurred during the extrusion process independent of the rapid depressurization.

Development of a biomimetic liver tumor-on-a-chip model based on decellularized liver matrix for toxicity testing

Cancer poses a great health threat to both developed and developing countries, and anti-cancer drugs are of important interest for improved clinical outcomes. Although tumor-on-a-chip technologies offer a feasible approach to screening drug toxicity, their capability to mimic the native tumor microenvironment (TME) is still limited. For better mimicry of the TME, we developed a biomimetic three-dimensional (3D) liver tumor-on-a-chip with the integration of essential components derived from decellularized liver matrix (DLM) with gelatin methacryloyl (GelMA) in a microfluidics-based 3D dynamic cell culture system. The biomimetic liver tumor-on-a-chip based on the integration of DLM components with GelMA, as opposed to GelMA only, had an increased capability to maintain cell viability and to enhance hepatocyte functions under flow conditions. The improved performance of the DLM-GelMA-based tumor-on-a-chip may be attributed to the provision of biochemical factors (e.g., growth factors), the preservation of scaffold proteins, and the reestablishment of biophysical cues (e.g., stiffness and shear stress) for better recapitulation of the 3D liver TME. Furthermore, this DLM-GelMA-based tumor-on-a-chip exhibited linear dose-dependent drug responses to the toxicity of acetaminophen and sorafenib. Taken together, our study demonstrates that the DLM-GelMA-based biomimetic liver tumor-on-a-chip better mimics the in vivo TME and holds great promise for a breadth of pathological and pharmacological studies.

Microfluidic technologies in cell isolation and analysis for biomedical applications

Efficient platforms for cell isolation and analysis play an important role in applied and fundamental biomedical studies. As cells commonly have a size of around 10 microns, conventional handling approaches at a large scale are still challenged in precise control and efficient recognition of cells for further performance of isolation and analysis. Microfluidic technologies have become more prominent in highly efficient cell isolation for circulating tumor cells (CTCs) detection, single-cell analysis and stem cell separation, since microfabricated devices allow for the spatial and temporal control of complex biochemistries and geometries by matching cell morphology and hydrodynamic traps in a fluidic network, as well as enabling specific recognition with functional biomolecules in the microchannels. In addition, the fabrication of nano-interfaces in the microchannels has been increasingly emerging as a very powerful strategy for enhancing the capability of cell capture by improving cell-interface interactions. In this review, we focus on highlighting recent advances in microfluidic technologies for cell isolation and analysis. We also describe the general biomedical applications of microfluidic cell isolation and analysis, and finally make a prospective for future studies.

Adhesion analysis of single circulating tumor cells on a base layer of endothelial cells using open microfluidics

Circulating Tumor Cell (CTC) adhesion is essential in understanding the mechanism of metastasis. Although conventional methods for measuring adhesion strength have performed well on cell populations, a deeper insight into cell behavior demands new approaches for realizing non-destructive, high-resolution, in situ analysis of single cell adhesion. Here, we present a microfluidic method for adhesion strength analysis of single CTCs on a base layer of endothelial cells (ECs) to clarify cell-to-cell adhesion at single cell resolution. A confined flow in open space formed by a microfluidic device supplied a trypsin zone for the analysis of single cell adhesion. Tumor cell lines were used to model CTCs. This method was proved successful for extracting different types of CTCs from an endothelial cell layer to measure their adhesion strength by the time required for detachment. Moreover, we successfully uncovered the drug influence on the adhesion strength of single CTCs on ECs, which is promising in drug screening for tumor therapy. The current work reports a general strategy for cell-to-cell adhesion analysis for single cells.

Measurement of Cell-Matrix Adhesion at Single-Cell Resolution for Revealing the Functions of Biomaterials for Adherent Cell Culture

Cell adhesion is essential for a cell to maintain its functions, and biomaterials acting as the extracellular matrix (ECM) play a vital role. However, conventional methods for evaluating the functions of biomaterials become insufficient and sometimes incorrect when we give a deeper insight into single-cell research. In this work, we reported a novel methodology for the measurement of cell-matrix adhesion at single-cell resolution that could precisely evaluate the functions of biomaterials for adherent cell culture. A microfludic device, a live single-cell extractor (LSCE), was used for cell extraction. We applied this method to evaluate various modified biomaterials. The results indicated that poly(l-polylysine) (PLL)-coated glass and fibronection (FN)-coated glass slides showed the best biocompatibility for adherent cell culture following by the (3-aminopropyl)triethoxysilane (APTES)-coated glass, while piranha solution treated glass slide and octadecyltrichlorosilane (OTS)-coated glass showed weak biocompatibilities. Furthermore, APTES, PLL, and FN modifications enhanced the cell heterogeneity, while the OTS modification weakened the cell heterogeneity compare to the initial piranha solution treated glass. The method not only clarified the cell-matrix adhesion strength at single-cell resolution but also revealed the influences of biomaterials on cell-matrix adhesion and heterogeneity of cell-matrix adhesion for adherent cell culture. It might be a general strategy for precise evaluation of biomaterials.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Stem cell culture and differentiation in microfluidic devices toward organ-on-a-chip

Microfluidic lab-on-a-chip provides a new platform with unique advantages to mimic complex physiological microenvironments in vivo and has been increasingly exploited to stem cell research. In this review, we highlight recent advances of microfluidic devices for stem cell culture and differentiation toward the development of organ-on-a-chip, especially with an emphasis on vital innovations within the last 2 years. Various aspects for improving on-chip stem-cell culture and differentiation, particularly toward organ-on-a-chip, are discussed, along with microenvironment control, surface modification, extracellular scaffolds, high throughput and stimuli. The combination of microfluidic technologies and stem cells hold great potential toward versatile systems of ‘organ-on-a-chip’ as desired.

Adapted with permission from [1–8].

Stem cells, capable of self-renewing and differentiating into cells of various tissue types, are drawing more and more attention for their enormous potential in many clinically associated applications that include drug screening, disease modeling and regenerative medicine. Conventional cell culture methods, however, have proven to be difficult to mimic in vivo like microenvironments and to provide a number of well-controlled stimuli that are critical for stem cell culture and differentiation. In contrast, microfluidic devices offer new capacities and unique advantages to mimic complex physiological microenvironments in vivo, and has been increasingly applied to stem cell research.

Controlled Drug Delivery Using Microdevices

Therapeutic drugs administered systematically are evenly distributed to the whole body through blood circulation and have to cross many biological barriers before reaching the pathological site. Conventional drug delivery may make drugs inactive or reduce their potency as they may be hydrolyzed or degraded enzymatically and are rapidly excreted through the urinary system resulting in suboptimal concentration of drugs at the desired site. Controlled drug delivery aims to localize the pharmacological activity of the drug to the desired site at desired release rates. The advances made by micro/nanofluidic technologies have provided new opportunities for better-controlled drug delivery. Various components of a drug delivery system can be integrated within a single tiny micro/nanofluidic chip. This article reviews recent advances of controlled drug delivery made by microfluidic/nanofluidic technologies. We first discuss microreservoir-based drug delivery systems. Then we highlight different kinds of microneedles used for controlled drug delivery, followed with a brief discussion about the current limitations and the future prospects of controlled drug delivery systems.

Engineering physical microenvironment for stem cell based regenerative medicine

Regenerative medicine has rapidly evolved over the past decade owing to its potential applications to improve human health. Targeted differentiations of stem cells promise to regenerate a variety of tissues and/or organs despite significant challenges. Recent studies have demonstrated the vital role of the physical microenvironment in regulating stem cell fate and improving differentiation efficiency. In this review, we summarize the main physical cues that are crucial for controlling stem cell differentiation. Recent advances in the technologies for the construction of physical microenvironment and their implications in controlling stem cell fate are also highlighted.