Stimulation of angiogenesis by FGF-1 delivered through a modified fibrin scaffold

Functionalised biomaterials as synthetic extracellular matrices to promote vascularisation and healing of diabetic wounds

Diabetic foot ulcers (DFU) are a type of chronic wound that constitute one of the most serious and debilitating complications associated with diabetes. The lack of clinically efficacious treatments to treat these recalcitrant wounds can lead to amputations for those worst affected. Biomaterial-based approaches offer great hope in this regard, as they provide a template for cell infiltration and tissue repair. However, there is an additional need to treat the underlying pathophysiology of DFUs, in particular insufficient vascularization of the wound which significantly hampers healing. Thus, the addition of pro-angiogenic moieties to biomaterials is a promising strategy to promote the healing of DFUs and other chronic wounds. In this review, we discuss the potential of biomaterials as treatments for DFU and the approaches that can be taken to functionalise these biomaterials such that they promote vascularisation and wound healing in pre-clinical models.

Designing a Biomaterial Approach to Control the Adaptive Response to a Skin Injury

The goal of this review is to explain how to design a biomaterial approach to control the adaptive response to injury, with an emphasis on skin wounds. The strategies will be selected based on whether they have a reasonable probability of meeting the desired clinical outcome vs. just comparing the pros and cons of different strategies. To do this, the review will look at the normal adaptive response in adults and why it does not meet the desired clinical outcome in most cases. In addition, the adaptive response will be looked at in cases where it does meet the clinical performance requirements including animals that regenerate and for fetal wound healing. This will lead to how biomaterials can be used to alter the overall adaptive response to allow it to meet the desired clinical outcome. The important message of the review is that you need to use the engineering design process, not the scientific method, to design a clinical treatment. Also, the clinical performance requirements are functional, not structural. The last section will give some specific examples of controlling the adaptive response for two skin injuries: burns and pressure ulcers. For burns, it will cover some preclinical studies used to justify a clinical study as well as discuss the results of a clinical study using this system. For pressure ulcers, it will cover some preclinical studies for two different approaches: electrical stimulation and degradable/regenerative scaffolds. For electrical stimulation, the results of a clinical study will be presented.

Plasminogen-Loaded Fibrin Scaffold as Drug Delivery System for Wound Healing Applications

Plasminogen is a protein involved in intravascular and extravascular fibrinolysis, as well as in wound healing, cell migration, tissue formation and angiogenesis. In recent years its role in healing of tympanic perforations has been demonstrated in plasminogen deficient mice. The aim of this work was to fabricate a fibrin-based drug delivery system able to provide a local and sustained release of plasminogen at the wound site. Initially, the biological activity of plasminogen was evaluated by in vitro experiments on cell cultures. A metabolic assay (MTT) was carried out on L929 mouse fibroblast to determine the concentration that does not affect cell viability, which turned out to be 64 nM. The effect of plasminogen on cell migration was evaluated through a scratch test on human keratinocytes: cells treated with 64 nM plasminogen showed faster scratch closure than in complete medium. Fibrin scaffold loaded with plasminogen was fabricated by a spray process. SEM analysis showed the typical nano-fibrillar structure of a fibrin scaffold. Tensile tests highlighted significantly higher value of the ultimate stress and strain of fibrin scaffold with respect to fibrin clot. The in-vitro release kinetic showed an initial plasminogen burst, after that the release slowed, reaching a plateau at 7 days. Plasminogen-loaded fibrin scaffold applied in full-thickness diabetic mouse lesions showed a significantly higher closure rate at 14 days than scaffold used as a reference material. Histological analysis demonstrated an improved reepithelization and collagen deposition in granulation tissue in mouse treated with plasminogen-loaded fibrin scaffold in comparison to unloaded fibrin scaffold. The obtained results demonstrated the suitability of the fibrin scaffold loaded with plasminogen as drug delivery system and suggest its use in wound healing applications, such as for the treatment of chronic diabeticulcers.

Cellular Mechanisms of FGF-Stimulated Tissue Repair

Growth factors belonging to the FGF family play important roles in tissue and organ repair after trauma. In this review, I discuss the regulation by FGFs of the aspects of cellular behavior important for reparative processes. In particular, I focus on the FGF-dependent regulation of cell proliferation, cell stemness, de-differentiation, inflammation, angiogenesis, cell senescence, cell death, and the production of proteases. In addition, I review the available literature on the enhancement of FGF expression and secretion in damaged tissues resulting in the increased FGF supply required for tissue repair.

Wound dressings as growth factor delivery platforms for chronic wound healing

Introduction: Years of tissue engineering research have clearly demonstrated the potential of integrating growth factors (GFs) into scaffolds for tissue regeneration, a concept that has recently been applied to wound dressings. The old concept of wound dressings that only take a passive role in wound healing has now been overtaken, and advanced dressings which can take an active part in wound healing, are of current research interest.Areas covered: In this review we will focus on the recent strategies for the delivery of GFs to wound sites with an emphasis on the different approaches used to achieve fine tuning of spatial and temporal concentrations to achieve therapeutic efficacy.Expert opinion: The use of GFs to accelerate wound healing and reduce scar formation is now considered a feasible therapeutic approach in patients with a high risk of infections and complications. The integration of micro - and nanotechnologies into wound dressings could be the key to overcome the inherent instability of GFs and offer adequate control over the release rate. Many investigations have led to encouraging outcomes in various in vitro and in vivo wound models, and it is expected that some of these technologies will satisfy clinical needs and will enter commercialization.

Biomaterial Enhanced Regeneration Design Research for Skin and Load Bearing Applications

Biomaterial enhanced regeneration (BER) falls mostly under the broad heading of Tissue Engineering: the use of materials (synthetic and natural) usually in conjunction with cells (both native and genetically modified as well as stem cells) and/or biological response modifiers (growth factors and cytokines as well as other stimuli, which alter cellular activity). Although the emphasis is on the biomaterial as a scaffold it is also the use of additive bioactivity to enhance the healing and regenerative properties of the scaffold. Enhancing regeneration is both moving more toward regeneration but also speeding up the process. The review covers principles of design for BER as well as strategies to select the best designs. This is first general design principles, followed by types of design options, and then specific strategies for applications in skin and load bearing applications. The last section, surveys current clinical practice (for skin and load bearing applications) including limitations of these approaches. This is followed by future directions with an attempt to prioritize strategies. Although the review is geared toward design optimization, prioritization also includes the commercializability of the devices. This means a device must meet both the clinical performance design constraints as well as the commercializability design constraints.

Fibrin-based delivery strategies for acute and chronic wound healing

Fibrin, a natural hydrogel, is the end product of the physiological blood coagulation cascade and naturally involved in wound healing. Beyond its role in hemostasis, it acts as a local reservoir for growth factors and as a provisional matrix for invading cells that drive the regenerative process. Its unique intrinsic features do not only promote wound healing directly via modulation of cell behavior but it can also be fine-tuned to evolve into a delivery system for sustained release of therapeutic biomolecules, cells and gene vectors. To further augment tissue regeneration potential, current strategies exploit and modify the chemical and physical characteristics of fibrin to employ combined incorporation of several factors and their timed release. In this work we show advanced therapeutic approaches employing fibrin matrices in wound healing and cover the many possibilities fibrin offers to the field of regenerative medicine.

Aptamer-Based Proteomic Profiling Reveals Novel Candidate Biomarkers and Pathways in Cardiovascular Disease

BACKGROUND

Single-stranded DNA aptamers are oligonucleotides of ≈50 base pairs in length selected for their ability to bind proteins with high specificity and affinity. Emerging DNA aptamer-based technologies may address limitations of existing proteomic techniques, including low sample throughput, which have hindered proteomic analyses of large cohorts.

METHODS

To identify early biomarkers of myocardial injury, we applied an aptamer-based proteomic platform that measures 1129 proteins to a clinically relevant perturbational model of planned myocardial infarction (PMI), patients undergoing septal ablation for hypertrophic cardiomyopathy. Blood samples were obtained before and at 10 and 60 minutes after PMI, and protein changes were assessed by repeated-measures analysis of variance. The generalizability of our PMI findings was evaluated in a spontaneous myocardial infarction cohort (Wilcoxon rank-sum). We then tested the platform's ability to detect associations between proteins and Framingham Risk Score components in the Framingham Heart Study, performing regression analyses for each protein versus each clinical trait.

RESULTS

We found 217 proteins that significantly changed in the peripheral vein blood after PMI in a derivation cohort (n=15; P<5.70E-5). Seventy-nine of these proteins were validated in an independent PMI cohort (n=15; P<2.30E-4); >85% were directionally consistent and reached nominal significance. We detected many protein changes that are novel in the context of myocardial injury, including Dickkopf-related protein 4, a WNT pathway inhibitor (peak increase 124%, P=1.29E-15) and cripto, a growth factor important in cardiac development (peak increase 64%, P=1.74E-4). Among the 40 validated proteins that increased within 1 hour after PMI, 23 were also elevated in patients with spontaneous myocardial infarction (n=46; P<0.05). Framingham Heart Study analyses revealed 156 significant protein associations with the Framingham Risk Score (n=899), including aminoacylase 1 (β=0.3386, P=2.54E-22) and trigger factor 2 (β=0.2846, P=5.71E-17). Furthermore, we developed a novel workflow integrating DNA-based immunoaffinity with mass spectrometry to analytically validate aptamer specificity.

CONCLUSIONS

Our results highlight an emerging proteomics tool capable of profiling >1000 low-abundance analytes with high sensitivity and high precision, applicable both to well-phenotyped perturbational studies and large human cohorts, as well.

Deferoxamine-fibrin accelerates angiogenesis in a rabbit model of peripheral ischemia

The intramuscular (IM) injection of a modified fibrin meshwork plus deferoxamine was tested in a rabbit model of acute hind-limb ischemia. After excision of the left external iliac and femoral arteries, 12 rabbits at the Milwaukee Heart Institute were divided into two groups: control and fibrin meshwork plus deferoxamine (FDEF) IM. The rabbits underwent angiography before surgery, immediately after, and 1 month postoperatively. These data were compiled through counting by means of a grid overlay. Another 12 rabbits at the Vakhidov Center of Surgery, which did not undergo angiography, underwent lower limb-calf blood pressure (LCBP) measurements made immediately after surgery and at postoperative days 10, 20 and 30. Biopsies from thigh skeletal muscles of rabbits that had L-CBP measurements underwent alkaline phosphatase staining on day 30 to determine the percentage of biopsied area that was occupied by capillaries. The number of arteries and arterioles crossing 71 grid intersections immediately post-surgery decreased from 30.2 6 2.3 to 18.0 6 2.0 (p, 0.05). One month post-surgery this number increased to 29.2 6 2.4 in controls (p, 0.05 vs immediately post-surgery) and to 59.6 6 3.2 in the FDEF group (p, 0.001 vs immediately post-surgery). By day 30 the L-CBP ratio improved in the FDEF group (0.8 6 0.02) vs controls (0.3 6 0.04). By day 30 the capillary density increased from that of normal muscle tissue (198.6 6 12.9/mm2) to 292 612.4/mm2 in the FDEF group (p, 0.05), but decreased in the control group to 98.7 6 7.7/mm2. IM injection of FDEF considerably accelerated angiogenesis in severely ischemic hind-limb tissue in this model, making it a viable treatment method for clinical use in patients who have critical limb ischemia.

Hybrid Biomaterial with Conjugated Growth Factors and Mesenchymal Stem Cells for Ectopic Bone Formation

Bone is a highly vascularized tissue and efficient bone regeneration requires neovascularization, especially for critical-sized bone defects. We developed a novel hybrid biomaterial comprising nanocalcium sulfate (nCS) and fibrin hydrogel to deliver mesenchymal stem cells (MSCs) and angiogenic factors, vascular endothelial growth factor (VEGF) and fibroblast growth factor 9 (FGF9), to promote neovascularization and bone formation. MSC and growth factor(s)-loaded scaffolds were implanted subcutaneously into mice to examine their angiogenic and osteogenic potential. Micro CT, alkaline phosphatase activity assay, and histological analysis were used to evaluate bone formation, while immunohistochemistry was employed to assess neovessel formation. The presence of fibrin preserved the nCS scaffold structure and promoted de novo bone formation. In addition, the presence of bone morphogenic protein 2-expressing MSC in nCS and fibrin hydrogels improved bone regeneration significantly. While FGF9 alone had no significant effect, the combination FGF9 and VEGF conjugated in fibrin enhanced neovascularization and bone formation more than 4-fold compared to nCS with MSC. Overall, our results suggested that the combination of nCS (to support bone formation) with a fibrin-based VEGF/FGF9 release system (support vascular formation) is an innovative and effective strategy that significantly enhanced ectopic bone formation in vivo.

Drug delivery systems for wound healing

Protein, gene, and small molecule therapies hold great potential for facilitating comprehensive tissue repair and regeneration. However, their clinical value will rely on effective delivery systems which maximize their therapeutic benefit. Significant advances have been made in recent years towards biomaterial delivery systems to satisfy this clinical need. Here we summarize the most outstanding advances in drug delivery technology for cutaneous wound healing.

Fibrin as a delivery system in wound healing tissue engineering applications

Fibrin is formed in the body upon initiation of the clotting cascade and is produced commercially for use as a tissue sealant and hemostasis device during surgical procedures. Experimentally fibrin is being increasingly used as a vector to deliver growth factors, cells, drugs and genes in tissue engineering applications mimicking aspects of the extra cellular matrix. Growth factors (GFs) are central to wound healing, inducing cell proliferation, migration and differentiation. Attempts have been made to augment wound healing with GFs, however widespread clinical use has been hindered in vivo due to their rapid metabolism within the body. Fibrin hydrogels protect GFs from rapid degradation and the composition of which can be altered to achieve their optimal release. This article reviews the use of fibrin for the delivery of GFs and details the various strategies that have evolved to alter the release rate so as to enhance the regenerative process, including bi-domain peptides, plasmin degradation sequences and heparin incorporation. This paper also reviews other recent advances in this field, such as dual delivery of cells and GF or sequential release of multiple GF.

Growth factor-delivery systems for tissue engineering: a materials perspective

The transplantation of organs, their surgical reconstruction or implantation of synthetic devices that can perform the function of organs, are the currently available methods for treating loss of tissue/organs in humans. However, the limitations associated with these techniques have led to the development of tissue engineering. One of the primary goals of tissue engineering is to provide growth factor delivery systems that can induce desired cell responses both in vitro and in vivo, in order to cause accelerated tissue regeneration. To make growth factors a more therapeutically viable alternative for the treatment of chronic degenerative diseases, a wide range of natural and synthetic materials have been employed as vehicles for their controlled delivery. The choice of material and design of the carrier device influence the mode of immobilization of growth factors on the scaffolds and their local/systemic administration. From a tissue engineer's perspective, materials could be used for designing scaffolds as well as for delivering single or multiple growth factors. Therefore, this review discusses growth factor delivery systems, with particular reference to carrier-based growth factor delivery systems with a focus on materials.

Injectable extracellular matrix derived hydrogel provides a platform for enhanced retention and delivery of a heparin-binding growth factor

Injectable hydrogels derived from the extracellular matrix (ECM) of decellularized tissues have recently emerged as scaffolds for tissue-engineering applications. Here, we introduce the potential for using a decellularized ECM-derived hydrogel for the improved delivery of heparin-binding growth factors. Immobilization of growth factors on a scaffold has been shown to increase their stability and activity. This can be done via chemical crosslinking, covalent bonding, or by incorporating natural or synthetic growth factor-binding domains similar to those found in vivo in sulfated glycosaminoglycans (GAGs). Many decellularized ECM-derived hydrogels retain native sulfated GAGs, and these materials may therefore provide an excellent delivery platform for heparin-binding growth factors. In this study, the sulfated GAG content of an ECM hydrogel derived from decellularized pericardial ECM was confirmed by Fourier transform infrared spectroscopy and its ability to bind basic fibroblast growth factor (bFGF) was established. Delivery in the pericardial matrix hydrogel increased retention of bFGF both in vitro and in vivo in ischemic myocardium compared to delivery in collagen. In a rodent infarct model, intramyocardial injection of bFGF in pericardial matrix enhanced neovascularization by approximately 112% compared to delivery in collagen. Importantly, the newly formed vasculature was anastomosed with existing vasculature. Thus, the sulfated GAG content of the decellularized ECM hydrogel provides a platform for incorporation of heparin-binding growth factors for prolonged retention and delivery.

Vascularization of three-dimensional collagen hydrogels using ultrasound standing wave fields

The successful fabrication of large, three-dimensional (3-D) tissues and organs in vitro requires the rapid development of a vascular network to maintain cell viability and tissue function. In this study, we utilized an application of ultrasound standing wave field (USWF) technology to vascularize 3-D, collagen-based hydrogels in vitro. Acoustic radiation forces associated with USWF were used to noninvasively organize human endothelial cells into distinct, multicellular planar bands within 3-D collagen gels. The formation and maturation of capillary-like endothelial cell sprouts were monitored over time and compared with sham-exposed collagen constructs, which were characterized by a homogeneous cell distribution. USWF-induced cell banding accelerated the formation and elongation of capillary-like sprouts, promoted collagen fiber alignment and resulted in the maturation of endothelial cell sprouts into lumen-containing, anastomosing networks found throughout the entire volume of the collagen gel. USWF-induced endothelial cell networks contained large, arteriole-sized lumen areas that branched into smaller, capillary-sized structures indicating the development of vascular tree-like networks. In contrast, sprout formation was delayed in sham-exposed collagen gels and endothelial cell networks were absent from sham gel centers and failed to develop into the vascular tree-like structures found in USWF-exposed constructs. Our results demonstrate that USWF technology leads to rapid and extensive vascularization of 3-D collagen-based engineered tissue and, therefore, provide a new strategy to vascularize engineered tissues in vitro.

Fibrin as a delivery system for therapeutic drugs and biomolecules

Fibrin is a natural biopolymer involved in the coagulation cascade. It acts as a reservoir for growth factors, cells, and enzymes during wound healing and provides a scaffold for the synthesis of extracellular matrix. Thus, the use of fibrin has expanded in recent years from traditional use as a sealant for surgical applications, to a tissue engineering scaffold capable of providing nature's cues for tissue regeneration. This paper reviews the advantageous biological aspects of fibrin, the history of the scaffold material, and its present role in the delivery of drugs, growth factors, cells, and gene vectors. Examples are given of studies where the structure and form of the scaffold have been manipulated for optimal release of the therapeutic agent, optimal cellular activity, and investigation into stem cell differentiation. It is evident from the body of literature presented that the benefits of fibrin are being exploited for a vast range of tissue engineering applications and that fibrin remains a key scaffold material for the delivery of drugs and biomolecules.

Behandlung von Trommelfellperforationen mit Fibringel

BACKGROUND

The goal of this study was to evaluate the effects of a fibrin gel on the healing of tympanic membrane perforation in rats.

METHODS

Prolonged tympanic membrane perforations in 12 rats were created by application of mitomycin C to the intact tympanic membranes followed by bilateral myringotomy. Repeated applications of a fibrin gel to the perforation site of one tympanic membrane were performed in each animal. Tympanic membranes were observed for a total of 8 weeks.

RESULTS

One perforation in each group was already patent at the end of the observation period. The mean healing period of the remaining tympanic membranes was found to be 16.7 days in the fibrin gel group and 19.6 days in the control group.

CONCLUSION

A fibrin sheet does not seem to promote the wound healing process of tympanic membranes. However, the sheet might serve as a drug-delivery system for growth factors in the treatment of tympanic membrane perforations, because of its biocompatibility.

Angiogenesis in Tissue Engineering: Breathing Life into Constructed Tissue Substitutes

Long-term function of three-dimensional (3D) tissue constructs depends on adequate vascularization after implantation. Accordingly, research in tissue engineering has focused on the analysis of angiogenesis. For this purpose, 2 sophisticated in vivo models (the chorioallantoic membrane and the dorsal skinfold chamber) have recently been introduced in tissue engineering research, allowing a more detailed analysis of angiogenic dysfunction and engraftment failure. To achieve vascularization of tissue constructs, several approaches are currently under investigation. These include the modification of biomaterial properties of scaffolds and the stimulation of blood vessel development and maturation by different growth factors using slow-release devices through pre-encapsulated microspheres. Moreover, new microvascular networks in tissue substitutes can be engineered by using endothelial cells and stem cells or by creating arteriovenous shunt loops. Nonetheless, the currently used techniques are not sufficient to induce the rapid vascularization necessary for an adequate cellular oxygen supply. Thus, future directions of research should focus on the creation of microvascular networks within 3D tissue constructs in vitro before implantation or by co-stimulation of angiogenesis and parenchymal cell proliferation to engineer the vascularized tissue substitute in situ.

Biomimetic approaches to protein and gene delivery for tissue regeneration

Novel therapeutic strategies that promote wound healing seek to mimic the response of the body to wounding, to regenerate rather than repair injured tissues. Many synthetic or natural biomaterials have been developed for this purpose and are used to deliver wound therapeutics in a controlled manner that prevents unwanted and potentially harmful side-effects. Here, we review the natural and synthetic biomaterials that have been developed for protein and gene delivery to enhance tissue regeneration. Particular emphasis is placed on novel biomimetic materials that respond to environmental stimuli or release their cargo according to cellular demand. Engineering biomaterials to release therapeutic agents in response to physiologic signals mimics the natural healing process and can promote faster tissue regeneration and reduce scarring in severe acute or chronic wounds.

Angiogenesis with biomaterial-based drug- and cell-delivery systems

Angiogenesis, the formation of new blood vessels from existing ones, is an important event in several biological processes, including wound healing. It plays a key role in determining the final functionality and integration of any implanted medical device. In addition, angiogenesis is a required event for organ development and has been accepted as a rate-limiting step in engineering tissue replacements. Besides these regenerative processes, uncontrolled angiogenesis is also involved in a number of pathologies, including tumor growth and metastases. Like angiogenesis, biomaterials also play a role in wound healing after medical device implantation and in tissue engineering. Interactions between the device biomaterials and host tissue will factor into the final device integration. Additionally, tissue-engineering strategies utilize biomaterials to a great extent because the paradigm of tissue engineering involves the use of cells, growth factors and scaffolding matrices in order to regenerate or replace tissue. Since almost all tissues are three-dimensional, the biomaterial scaffold plays an integral role in the paradigm. This review will emphasize the influence of biomaterials on angiogenesis as it applies to medical device implantation, tissue engineering and therapies for pathological angiogenesis.

Role of Activated Growth Factors in Lumbar Spinal Fusions

BACKGROUND

The concentration of platelets into an activated growth factor (AGF) gel may stimulate graft consolidation into a fusion mass. Preoperative hemodilution and intraoperative clot activation may also reduce the overall blood loss. Consequently, the need for postoperative transfusions may also be reduced.

OBJECTIVE

The objective of this work was to report our experience with AGF platelet gels in transforaminal lumbar interbody fusion (TLIF) procedures.

METHODS

A consecutive series of patients between 1996 and 1999 undergoing one- and two-level TLIFs with AGF were compared with a consecutive series of TLIF patients who did not receive AGF. Sixty-two control subjects who did not receive AGF and 22 patients who received an AGF platelet gel were compared after 41 and 34 months of follow-up, respectively.

RESULTS

On average, the AGF group required 18 minutes of additional preincision anesthesia (P = 0.0001). No statistical differences in the operative times, estimated blood loss, postoperative drainage, percentage of patients requiring a transfusion, or length of hospitalization were appreciated between the two groups. The 19% decrease in the arthrodesis rate of the AGF group, as compared with the control group, did not reach statistical significance. Platelet counts from the AGF platelet concentrates demonstrated an average 3.5-fold increase compared with preoperative serum levels.

CONCLUSIONS

The theoretical benefits of AGF platelet gel technology were not clinically appreciated. The cost of implementing this technology may therefore outweigh its theoretical benefits.

Vascular endothelial growth factor, fibroblast growth factor 2, platelet derived growth factor and transforming growth factor beta released in human dental pulp following orthodontic force

OBJECTIVE

The release of four diffusible angiogenic growth factors in human dental pulp following orthodontic force was investigated by using neutralising growth factor antibodies (NAs), individually and in four different combinations to block their effects. This study investigated if increasing the number of NAs (anti h vascular endothelial growth factor (VEGF), anti h fibroblast growth factor (FGF2), anti h platelet derived growth factor (PDGF) and anti Transforming growth factor beta (TGFbeta)) in combination resulted in a progressive reduction of the angiogenic response of the pulp.

MATERIALS AND METHODS

The dental pulps from two groups of 40 premolar teeth, four teeth from each of 20 patients treated with fixed appliances for 2 weeks, were divided vertically, and sections from each half pulp co-cultured with sections of rat aorta in collagen. In one group, one of each of the four NAs, and in the other group, one of the four different NA combinations were added to the media of the co-cultures from one half of the pulp from each of the four teeth of each patient; the other half pulp co-cultures were controls. Cultures were examined daily by light microscopy for growth and number of microvessels.

RESULTS

NAs significantly reduced microvessel numbers in the co-cultures when added individually (P<0.004), and in each of the four combinations (P<0.002), with a trend to progressively reduced microvessel numbers with increasing number of NAs in combination.

CONCLUSIONS

Results indicated that all four angiogenic growth factors examined were released following orthodontic force application and play a role in the angiogenic response of the pulp, and that these factors may be more effective in combination.

Fibrin Glue Alone and Skeletal Myoblasts in a Fibrin Scaffold Preserve Cardiac Function after Myocardial Infarction

Current efforts in cardiac tissue engineering center around the use of scaffolds that deliver cells to the epicardial surface. In this study, we examined the effects of fibrin glue as an injectable scaffold and wall support in ischemic myocardium. The left coronary artery of rats was occluded for 17 min, followed by reperfusion. Echocardiography was performed 8 days after infarction. One to 2 days later, either 0.5% bovine serum albumin (BSA) in phosphate-buffered saline, fibrin glue alone, skeletal myoblasts alone, or skeletal myoblasts in fibrin glue were injected into the ischemic left ventricle. Echocardiography was again performed 5 weeks after injection. The animals were then sacrificed and the hearts were fresh frozen and sectioned for histology and immunohistochemistry. Both the fractional shortening (FS) and infarct wall thickness of the BSA group decreased significantly after 5 weeks (p = 0.0005 and 0.02, respectively). In contrast, both measurements for the fibrin glue group, cells group, and cells in fibrin glue group did not change significantly (FS: p = 0.18, 0.89, and 0.19, respectively; wall thickness: p = 0.40, 0.44, 0.43, respectively). Fibrin glue is capable of preserving infarct wall thickness and cardiac function after a myocardial infarction in rats and may be useful as a biomaterial scaffold for myocardial cell transplantation.

Autologous Cartilage Grafts Enhanced by a Novel Transplant Medium Using Fibrin Sealant and Fibroblast Growth Factor

OBJECTIVE

To introduce and assess a system for the delivery of fibroblast growth factor to autologous cartilage grafts using fibrin sealant and analyze whether this "enhancement" results in reduced rates of cartilage resorption and greater preservation of normal architectural features compared with "unenhanced" cartilage grafts.

METHODS

Auricular cartilage segments measuring 1 cm(2) were harvested from 12 New Zealand white rabbits, morselized, and implanted into the subcutaneous dorsum of the upper back for 3 months. The conditions included (1) cartilage alone; (2) cartilage + fibrin sealant; (3/4) cartilage + acidic or basic fibroblast growth factor (aFGF or bFGF); and (5/6) cartilage + fibrin sealant + aFGF or bFGF. Subsequent to graft harvest, gross and microscopic assessments were performed to assess size, structural integrity, and architectural features, with comparisons performed between each of the conditions.

RESULTS

The mean areas of the harvested cartilage grafts treated with fibrin sealant + aFGF or bFGF were 1.23 cm(2) and 1.19 cm(2), respectively, while the corresponding value for the untreated (ie, cartilage alone) specimens was 1.03 cm(2). The percentage of decrease in size was 45% for the untreated specimens and 0% for the specimens treated with fibrin sealant + aFGF or fibrin sealant + bFGF. Cartilage treated with fibrin sealant + bFGF had the greatest quantity of elastin fibers of the 6 conditions. Cartilage grafts treated with fibrin sealant alone demonstrated the most intense ground substance staining on a computerized measure of pixel intensity.

CONCLUSIONS

Our findings demonstrated significant improvements in graft quality using fibroblast growth factor and fibrin sealant or even fibrin sealant alone. These findings may justify changes in how cartilage grafts are prepared and delivered for facial augmentation procedures to reduce graft resorption and maintain the structural integrity of the cartilage. Further trials will be performed to elucidate the optimal growth factor concentrations for maximum structural and architectural benefits.

Site-specific delivery of acidic fibroblast growth factor stimulates angiogenic and osteogenic responsesin vivo

A major clinical problem in orthopedics is the healing of nonunion fractures. Limitations of this bone repair process include insufficient angiogenesis and mineralization. Integrating appropriate biomaterials with site-specific neovascularization and osteogenesis at the wound site has been the focus of several clinically relevant therapeutic strategies. As an extracellular protein, acidic fibroblast growth factor (FGF-1) induces, coordinates, and sustains site-specific molecular responses associated with angiogenesis and osteogenesis. To establish the ability of this growth factor to coordinate bone regenerative process in vivo, site-specific delivery of FGF-1, entrapped in a fibrin/hydroxyapatite composite, was evaluated. Kinetic analysis in vivo revealed the biocomposite was capable of delivering biologically active FGF-1. Release kinetics revealed an initial delivery of 87.5 ng/h of active FGF-1 in the first 20 h, followed by a reduced delivery of 28 ng/h during the next 20 h. In situ immunohistological analyses demonstrated that FGF-1-containing implants induced increased angiogenesis and infiltration of cells expressing osteogenic related markers (i.e., osteopontin, osteocalcin). Collectively, these efforts support that site-specific delivery of active FGF-1 in a fibrin/hydroxyapatite composite is competent to induce not only angiogenesis but also osteogenic cellular responses.

Bone tissue engineering: recent advances and promising therapeutic agents

Bone regeneration can be accomplished with growth factors, cells and delivery systems. This review is a summary of these components that may be used for tissue regeneration. Support for the potential therapeutic applications of transcription factors in bone tissue engineering will also be discussed.

Direct fibrin injection to promote new collateral growth in hind limb ischemia in a rabbit model

Local stimulation of angiogenesis is a new approach for the treatment of critical limb ischemia. Our investigation tested intramuscular (i.m.) injection of a modified fibrin meshwork in a rabbit model.

METHODS

The left external iliac and femoral arteries were excised in 24 rabbits that were divided into four groups: control; i.m. saline injection; fibrin meshwork plus low dose (2.5 mg) fibrinogen i.m.; fibrin meshwork plus high-dose (5.0 mg) fibrinogen i.m. Angiography was performed before surgery, immediately after surgery, and one month postoperatively. Lower limb-calf blood pressure was measured immediately after surgery and at postoperative days 10, 20, and 30. On day 30, conventional indirect immunostaining was performed to determine the percentage of the area occupied by capillaries.

RESULTS

Immediately after surgery, in all four groups, the number of contract-opacified arteries (COA) crossing a specific segment of a grid decreased from 5.3 +/- 1.3 to 3.2 +/- 1.0 (p < 0.05); the number of grid intersections decreased from 30.2 +/- 6.5 to 19.3 +/- 4.8 (p < 0.05); and the total number of grids with COA decreased from 18.3 +/- 3.8 to 12.2 +/- 2.5 (p < 0.05). One month after surgery, in the control group, these parameters were 6.2 +/- 1.1, 33.2 +/- 5.7 and 20.3 +/- 1.5, respectively; in the saline-treated group, these parameters were 6.1 +/- 0.8, 28.3 +/- 6.9 and 19.8 +/- 1.1, respectively (p > 0.05 versus control and versus baseline data). When fibrin containing 5.0 mg fibrinogen was used, these parameters increased to 8.5 +/- 0.9, 48.3 +/- 5.1, and 27.1 +/- 0.9, respectively (p < 0.001 versus immediately after surgery and p < 0.05 versus control). In all four series, no Doppler flow signal was detected from the posterior tibial artery by day 10. By day 30, the lower limb-calf blood pressure ratio had improved in all four series, but was significantly improved in only the two groups treated with fibrin sealant (0.3 +/- 0.05 control; 0.3 +/- 0.08 saline; 0.6 +/- 0.06 fibrinogen 2.5; 0.7 +/- 0.05 fibrinogen 5.0).

CONCLUSION

Intramuscular injection of a fibrin meshwork considerably increased angiogenesis in the severely ischemic hind limb and may be strongly recommended for clinical use in patients with limb-threatening ischemia.

Composition options for tissue-engineered bone

The logical assembly of tissue-engineered bone is ultimately directed by the clinical status of the patient. The basic elements for tissue-engineered bone should include signaling molecules, cells, and extracellular matrix. The assembly of these basic elements may need to be modified by tissue engineers to account for patient variables of age, gender, health, systemic conditions, habits, and anatomical implant. Moreover, different regions of the body will have different functional loads and vascularity. This review discusses several basic options that may be necessary to engineer bone, including spatial and temporal assembly of signaling factors, cells, and biomimetic extracellular matrices. Moreover, the importance of the health care status of the patient who may be receiving the tissue-engineered composition is emphasized.

The use of fibrin glue in skin grafts and tissue-engineered skin replacements: a review

Fibrin glue has been widely used as an adhesive in plastic and reconstructive surgery. This article reviews the advantages and disadvantages of its use with skin grafts and tissue-engineered skin substitutes. Fibrin glue has been shown to improve the percentage of skin graft take, especially when associated with difficult grafting sites or sites associated with unavoidable movement. Evidence also suggests improved hemostasis and a protective effect resulting in reduced bacterial infection. Fibrin, associated with fibronectin, has been shown to support keratinocyte and fibroblast growth both in vitro and in vivo, and may enhance cellular motility in the wound. When used as a delivery system for cultured keratinocytes and fibroblasts, fibrin glue may provide similar advantages to those proven with conventional skin grafts. Fibrin glue has also been shown to be a suitable delivery vehicle for exogenous growth factors that may in the future be used to accelerate wound healing.

Tissue engineering in plastic reconstructive surgery

Tissue engineering (TE) is a new interdisciplinary field of applied research combining engineering and biosciences together with clinical application, mainly in surgical specialities, to develop living substitutes for tissues and organs. Tissue engineering approaches can be categorized into substitutive approaches, where the aim is the ex vivo construction of a living tissue or organ similar to a transplant, vs. histioconductive or histioinductive concepts in vivo. The main successful approaches in developing tissue substitutes to date have been progresses in the understanding of cell-cell interactions, the selection of appropriate matrices (cell-matrix interaction) and chemical signalling (cytokines, growth factors) for stimulation of cell proliferation and migration within a tissue-engineered construct. So far virtually all mammalian cells can be cultured under specific culture conditions and in tissue specific matrices. Future progress in cell biology may permit the use of pluripotent stem cells for TE. The blueprint for tissue differentiation is the genome: for this it is reasonable to combine tissue engineering with gene therapy. The key to the progress of tissue engineering is an understanding between basic scientists, biochemical engineers, clinicians, and industry.

Expression patterns of Fgf-8 during development and limb regeneration of the axolotl

Fgf-8 is one of the key signaling molecules implicated in the initiation, outgrowth, and patterning of vertebrate limbs. However, it is not clear whether FGF-8 plays similar role in development and regeneration of urodele limbs. We isolated a Fgf-8 cDNA from the Mexican axolotl (Ambystoma mexicanum) through the screening of an embryo cDNA library. The cloned 1.26-kb cDNA contained an open reading frame encoding 212 amino acid residues with 84%, 86%, and 80% amino acid identities to those of Xenopus, chick, and mouse, respectively. By using the above clone as a probe, we examined the temporal and spatial expression patterns of Fgf-8 in developing embryos and in regenerating larval limbs. In developing embryos, Fgf-8 was expressed in the neural fold, midbrain-hindbrain junction, tail and limb buds, pharyngeal clefts, and primordia of maxilla and mandible. In the developing axolotl limb, Fgf-8 began to be expressed in the prospective forelimb region at pre-limb-bud and limb bud stages. Interestingly, strong expression was detected in the mesenchymal tissue of the limb bud before digit forming stages. In the regenerating limb, Fgf-8 expression was noted in the basal layer of the apical epithelial cap (AEC) and the underlying thin layer of mesenchymal tissue during blastema formation stages. These data suggest that Fgf-8 is involved in the organogenesis of various craniofacial structures, the initiation and outgrowth of limb development, and the blastema formation and outgrowth of regenerating limbs. In the developing limb of axolotl, unlike in Xenopus or in amniotes such as chick and mouse, the Fgf-8 expression domain was localized mainly in the mesenchyme rather than epidermis. The unique expression pattern of Fgf-8 in axolotl suggests that the regulatory mechanism of Fgf-8 expression is different between urodeles and other higher species. The expression of Fgf-8 in the deep layer of the AEC and the thin layer of underlying mesenchymal tissue in the regenerating limbs support the previous notion that the amphibian AEC is a functional equivalent of the AER in amniotes.

Imaging Tc-99m-labeled FGF-1 targeting in rats

Recombinant human acidic fibroblast growth factor (FGF-1) was radiolabeled with (99m)Tc by the HYNIC method. The (99m)Tc-FGF-1 retained its representative molecular mass, heparin affinity, cellular binding to both low (Kd = 9.5 nM) and high (Kd = 125 pM) affinity sites, and mitogenic activity. Gamma camera imaging after intravenous dosing in rats confirmed high liver and kidney binding. Heparin significantly decreased (99m)Tc-FGF-1 liver uptake and increased urinary excretion. These studies illustrate a new method for imaging FGF-1 targeting under various conditions.

Fibrin scaffold as an effective vehicle for the delivery of acidic fibroblast growth factor (FGF-1)

The effect of wound healing by fibrin and acidic fibroblast growth factor (FGF-1) in an in vivo model was evaluated in this study. Four full-thickness wounds were made on the dorsum of each rabbit (n = 5). Each of these wounds had different treatment groups: control, topical FGF-1 (100 microg/9 cm2), fibrin (2.0 mL at 60 mg/mL fibrinogen), and FGF-1 (100 microg/9 cm2)/fibrin. The animals were sacrificed at the end of 2 weeks. Histomorphometric analysis and mechanical testing were conducted to assess the healing response. FGF-1/fibrin treatment improved the mechanical properties of the healed tissue. Fibrin scaffold exhibited the desired tissue response, as demonstrated by the lack of inflammation, and was deemed an effective carrier for FGF-1.

The effect of TGF-beta delivered through a collagen scaffold on wound healing

In this preliminary study, the wound healing response of full-thickness skin defects to transforming growth factor beta (TGF-beta) incorporated in a collagen scaffold was evaluated. The objectives of this study were (1) to compare the effects of TGF-beta on the cellular and tissue response and mechanical properties and (2) to determine the effects of a collagen scaffold on wound healing when compared to control. Three 3 x 3 cm, full-thickness defects were created on the dorsi of 15 New Zealand White rabbits. Each rabbit had a control (no treatment), collagen scaffold, and collagen scaffold with TGF-beta (2 microg/cm2). All the wounds were covered with a transparent polyurethane dressing. There were three periods of study (1, 2, and 3 weeks) with five rabbits in each period. The volume fraction of the tissue and cells was histomorphometrically determined for each wound. A greater inflammatory response was found in the collagen scaffold-treated group, but the fastest epithelialization and contraction rates were associated with TGF-beta and collagen. No significant differences in the mechanical strength between the different treatment groups were seen. Overall, TGF-beta delivered through a collagen scaffold enhanced the healing process and showed promise for future clinical applications.