Stabilizing the heterologously expressed uric acid-xanthine transporter UapA from the lower eukaryote Aspergillus nidulans

Transfer of stabilising mutations between different secondary active transporter families

Integral membrane transporters play essential roles in the movement of substrates across biological membranes. One approach to produce transporters suitable for structural studies is to introduce mutations that reduce conformational flexibility and increase stability. However, it can be difficult to predict which mutations will result in a more stable protein. Previously, we stabilised the uric acid‐xanthine transporter, UapA, a member of the SLC23 family, through introduction of a single‐point mutation, G411V, trapping the protein in the inward‐facing conformation. Here, we attempted to stabilise the structurally related BOR1 transporter from Arabidopsis thaliana, a member of the SLC4 family, by introducing the equivalent substitution. We identified possible residues, P362 and M363, in AtBOR1, likely to be equivalent to the G411 of UapA, and generated four mutants, P362V or L and M363F or Y. Stability analysis using heated Fluorescent Size Exclusion Chromatography indicated that the M363F/Y mutants were more stable than the WT AtBOR1 and P362V/L mutants. Furthermore, functional complementation analysis revealed that the M363F/Y mutants exhibited reduced transport activity compared to the P362V/L and WT proteins. Purification and crystallisation of the M363F/Y proteins yielded crystals that diffracted better than WT (5.5 vs 7 Å). We hypothesise that the increased bulk of the F and Y substitutions limits the ability of the protein to undergo the conformational rearrangements associated with transport. These proteins represent a basis for future studies on AtBOR1.

Pendant-bearing glucose-neopentyl glycol (P-GNG) amphiphiles for membrane protein manipulation: Importance of detergent pendant chain for protein stabilization

Glucoside detergents are successfully used for membrane protein crystallization mainly because of their ability to form small protein-detergent complexes. In a previous study, we introduced glucose neopentyl glycol (GNG) amphiphiles with a branched diglucoside structure that has facilitated high resolution crystallographic structure determination of several membrane proteins. Like other glucoside detergents, however, these GNGs were less successful than DDM in stabilizing membrane proteins, limiting their wide use in protein structural study. As a strategy to improve GNG efficacy for protein stabilization, we introduced two different alkyl chains (i.e., main and pendant chains) into the GNG scaffold while maintaining the branched diglucoside head group. Of these pendant-bearing GNGs (P-GNGs), three detergents (GNG-2,14, GNG-3,13 and GNG-3,14) were not only notably better than both DDM (a gold standard detergent) and the previously described GNGs at stabilizing all six membrane proteins tested here, but were also as efficient as DDM at membrane protein extraction. The results suggest that the C14 main chain of the P-GNGs is highly compatible with the hydrophobic widths of membrane proteins, while the C2/C3 pendant chain is effective at strengthening detergent hydrophobic interactions. Based on the marked effect on protein stability and solubility, these glucoside detergents hold significant potential for membrane protein structural study. Furthermore, the independent roles of the detergent two alkyl chains first introduced in this study have shed light on new amphiphile design for membrane protein study. STATEMENT OF SIGNIFICANCE: Detergent efficacy for protein stabilization tends to be protein-specific, thus it is challenging to find a detergent that is effective at stabilizing multiple membrane proteins. By incorporating a pendant chain into our previous GNG scaffold, we prepared pendant chain-bearing GNGs (P-GNGs) and identified three P-GNGs that were highly effective at stabilizing all membrane proteins tested here including two GPCRs. In addition, the new detergents were as efficient as DDM at extracting membrane proteins, enabling use of these detergents over the multiple steps of protein isolation. The key difference between the P-GNGs and other glucoside detergents, the presence of a pendant chain, is likely to be responsible for their markedly enhanced protein stabilization behavior.

Strategies for successful isolation of a eukaryotic transporter

The isolation of integral membrane proteins for structural analysis remains challenging and this is particularly the case for eukaryotic membrane proteins. Here we describe our efforts to isolate OsBOR3, a boron transporter from Oryza sativa. OsBOR3 was expressed as both full length and a C-terminally truncated form lacking residues 643-672 (OsBOR3_Δ1-642). While both express well as C-terminal GFP fusion proteins in Saccharomyces cerevisiae, the full length protein isolates poorly in the detergent dodecyl-β-d-maltoside (DDM). The OsBOR3_Δ1-642 isolated in DDM in large quantities but was contaminated with GFP tagged protein, indicated incomplete protease removal of the tag. Addition of the reducing agent dithiothreitol (DTT) had no effect on isolation. Detergent screening indicated that the neopentyl glycol detergents, LMNG, UDMNG and DMNG conferred greater stability on the OsBOR3_Δ1-642 than DDM. Isolation of OsBOR3_Δ1-642 in LMNG both in the presence and absence of DTT produced large quantities of protein but contaminated with GFP tagged protein. Isolation of OsBOR3_Δ1-642 in DMNG + DTT resulted in protein sample that does not contain any detectable GFP but elutes at a higher retention volume than that seen for protein isolated in either DDM or LMNG. Mass spectrometry confirmed that the LMNG and DMNG purified protein is OsBOR3_Δ1-642 indicating that the DMNG isolated protein is monomer compared to the dimer isolated using LMNG. This was further supported by single particle electron microscopic analysis revealing that the DMNG protein particles are roughly half the size of the LMNG protein particles.

Vitamin E-based glycoside amphiphiles for membrane protein structural studies

Membrane proteins play critical roles in a variety of cellular processes. For a detailed molecular level understanding of their biological functions and roles in disease, it is necessary to extract them from the native membranes. While the amphipathic nature of these bio-macromolecules presents technical challenges, amphiphilic assistants such as detergents serve as useful tools for membrane protein structural and functional studies. Conventional detergents are limited in their ability to maintain the structural integrity of membrane proteins and thus it is essential to develop novel agents with enhanced properties. Here, we designed and characterized a novel class of amphiphiles with vitamin E (i.e., α-tocopherol) as the hydrophobic tail group and saccharide units as the hydrophilic head group. Designated vitamin E-based glycosides (VEGs), these agents were evaluated for their ability to solubilize and stabilize a set of membrane proteins. VEG representatives not only conferred markedly enhanced stability to a diverse range of membrane proteins compared to conventional detergents, but VEG-3 also showed notable efficacy toward stabilization and visualization of a membrane protein complex. In addition to hydrophile-lipophile balance (HLB) of detergent molecules, the chain length and molecular geometry of the detergent hydrophobic group seem key factors in determining detergent efficacy for membrane protein (complex) stability.

Structural Lipids Enable the Formation of Functional Oligomers of the Eukaryotic Purine Symporter UapA

The role of membrane lipids in modulating eukaryotic transporter assembly and function remains unclear. We investigated the effect of membrane lipids in the structure and transport activity of the purine transporter UapA from Aspergillus nidulans. We found that UapA exists mainly as a dimer and that two lipid molecules bind per UapA dimer. We identified three phospholipid classes that co-purified with UapA: phosphatidylcholine, phosphatidylethanolamine (PE), and phosphatidylinositol (PI). UapA delipidation caused dissociation of the dimer into monomers. Subsequent addition of PI or PE rescued the UapA dimer and allowed recovery of bound lipids, suggesting a central role of these lipids in stabilizing the dimer. Molecular dynamics simulations predicted a lipid binding site near the UapA dimer interface. Mutational analyses established that lipid binding at this site is essential for formation of functional UapA dimers. We propose that structural lipids have a central role in the formation of functional, dimeric UapA.

•

Mass spectrometry reveals specific lipid binding to the eukaryotic transporter UapA

•

Interfacial lipids stabilize the functional UapA dimer

•

MD simulations reveal the lipid binding sites

•

Mutagenesis of a lipid binding site disrupts UapA dimerization and function in vivo

Tandem malonate-based glucosides (TMGs) for membrane protein structural studies

High-resolution membrane protein structures are essential for understanding the molecular basis of diverse biological events and important in drug development. Detergents are usually used to extract these bio-macromolecules from the membranes and maintain them in a soluble and stable state in aqueous solutions for downstream characterization. However, many eukaryotic membrane proteins solubilized in conventional detergents tend to undergo structural degradation, necessitating the development of new amphiphilic agents with enhanced properties. In this study, we designed and synthesized a novel class of glucoside amphiphiles, designated tandem malonate-based glucosides (TMGs). A few TMG agents proved effective at both stabilizing a range of membrane proteins and extracting proteins from the membrane environment. These favourable characteristics, along with synthetic convenience, indicate that these agents have potential in membrane protein research.

Structure of eukaryotic purine/H(+) symporter UapA suggests a role for homodimerization in transport activity

The uric acid/xanthine H⁺ symporter, UapA, is a high-affinity purine transporter from the filamentous fungus Aspergillus nidulans. Here we present the crystal structure of a genetically stabilized version of UapA (UapA-G411V_Δ1–11) in complex with xanthine. UapA is formed from two domains, a core domain and a gate domain, similar to the previously solved uracil transporter UraA, which belongs to the same family. The structure shows UapA in an inward-facing conformation with xanthine bound to residues in the core domain. Unlike UraA, which was observed to be a monomer, UapA forms a dimer in the crystals with dimer interactions formed exclusively through the gate domain. Analysis of dominant negative mutants is consistent with dimerization playing a key role in transport. We postulate that UapA uses an elevator transport mechanism likely to be shared with other structurally homologous transporters including anion exchangers and prestin.

UapA is a uric acid/xanthine H⁺ symporter from a filamentous fungus. Here, the authors solve the crystal structure of the transporter in complex with xanthine revealing it to be a dimer, and this homodimerisation is proposed to be important for function.

Overexpression of membrane proteins from higher eukaryotes in yeasts

Heterologous expression and characterisation of the membrane proteins of higher eukaryotes is of paramount interest in fundamental and applied research. Due to the rather simple and well-established methods for their genetic modification and cultivation, yeast cells are attractive host systems for recombinant protein production. This review provides an overview on the remarkable progress, and discusses pitfalls, in applying various yeast host strains for high-level expression of eukaryotic membrane proteins. In contrast to the cell lines of higher eukaryotes, yeasts permit efficient library screening methods. Modified yeasts are used as high-throughput screening tools for heterologous membrane protein functions or as benchmark for analysing drug-target relationships, e.g., by using yeasts as sensors. Furthermore, yeasts are powerful hosts for revealing interactions stabilising and/or activating membrane proteins. We also discuss the stress responses of yeasts upon heterologous expression of membrane proteins. Through co-expression of chaperones and/or optimising yeast cultivation and expression strategies, yield-optimised hosts have been created for membrane protein crystallography or efficient whole-cell production of fine chemicals.

Modelling and mutational analysis of Aspergillus nidulans UreA, a member of the subfamily of urea/H⁺ transporters in fungi and plants

We present the first account of the structure-function relationships of a protein of the subfamily of urea/H(+) membrane transporters of fungi and plants, using Aspergillus nidulans UreA as a study model. Based on the crystal structures of the Vibrio parahaemolyticus sodium/galactose symporter (vSGLT) and of the Nucleobase-Cation-Symport-1 benzylhydantoin transporter from Microbacterium liquefaciens (Mhp1), we constructed a three-dimensional model of UreA which, combined with site-directed and classical random mutagenesis, led to the identification of amino acids important for UreA function. Our approach allowed us to suggest roles for these residues in the binding, recognition and translocation of urea, and in the sorting of UreA to the membrane. Residues W82, Y106, A110, T133, N275, D286, Y388, Y437 and S446, located in transmembrane helixes 2, 3, 7 and 11, were found to be involved in the binding, recognition and/or translocation of urea and the sorting of UreA to the membrane. Y106, A110, T133 and Y437 seem to play a role in substrate selectivity, while S446 is necessary for proper sorting of UreA to the membrane. Other amino acids identified by random classical mutagenesis (G99, R141, A163, G168 and P639) may be important for the basic transporter's structure, its proper folding or its correct traffic to the membrane.

Multicolour fluorescence-detection size-exclusion chromatography for structural genomics of membrane multiprotein complexes

Many interesting and important membrane proteins are hetero-oligomeric. However, besides naturally abundant examples, the structures of relatively few such complexes are known. Partly, this is due to difficulties in expression, stoichiometric assembly, and in the evaluation of their stability prior to crystallization trials. Here we describe a new approach, which allows rapid assessment of protein complex quality, assembly and stoichiometry, simplifying the search for conditions conducive to long-term stability and crystallization. Multicolour fluorescence size-exclusion chromatography (MC-FSEC) is used to enable tracking of individual subunits through expression, solubilization and purification steps. We show how the method has been applied to the heterodimeric transporter associated with antigen processing (TAP) and demonstrate how it may be extended in order to analyse membrane multisubunit assemblies.

Identification of the substrate recognition and transport pathway in a eukaryotic member of the nucleobase-ascorbate transporter (NAT) family

Using the crystal structure of the uracil transporter UraA of Escherichia coli, we constructed a 3D model of the Aspergillus nidulans uric acid-xanthine/H(+) symporter UapA, which is a prototype member of the Nucleobase-Ascorbate Transporter (NAT) family. The model consists of 14 transmembrane segments (TMSs) divided into a core and a gate domain, the later being distinctly different from that of UraA. By implementing Molecular Mechanics (MM) simulations and quantitative structure-activity relationship (SAR) approaches, we propose a model for the xanthine-UapA complex where the substrate binding site is formed by the polar side chains of residues E356 (TMS8) and Q408 (TMS10) and the backbones of A407 (TMS10) and F155 (TMS3). In addition, our model shows several polar interactions between TMS1-TMS10, TMS1-TMS3, TMS8-TMS10, which seem critical for UapA transport activity. Using extensive docking calculations we identify a cytoplasm-facing substrate trajectory (D360, A363, G411, T416, R417, V463 and A469) connecting the proposed substrate binding site with the cytoplasm, as well as, a possible outward-facing gate leading towards the substrate major binding site. Most importantly, re-evaluation of the plethora of available and analysis of a number of herein constructed UapA mutations strongly supports the UapA structural model. Furthermore, modeling and docking approaches with mammalian NAT homologues provided a molecular rationale on how specificity in this family of carriers might be determined, and further support the importance of selectivity gates acting independently from the major central substrate binding site.