Aspects of the design and delivery of microparticles for vaccine applications

Effect of Experimental Parameters on Alginate/Chitosan Microparticles for BCG Encapsulation

The aim of the present study was to develop novel Mycobacterium bovis bacille Calmette-Guérin (BCG)-loaded polymeric microparticles with optimized particle surface characteristics and biocompatibility, so that whole live attenuated bacteria could be further used for pre-exposure vaccination against Mycobacterium tuberculosis by the intranasal route. BCG was encapsulated in chitosan and alginate microparticles through three different polyionic complexation methods by high speed stirring. For comparison purposes, similar formulations were prepared with high shear homogenization and sonication. Additional optimization studies were conducted with polymers of different quality specifications in a wide range of pH values, and with three different cryoprotectors. Particle morphology, size distribution, encapsulation efficiency, surface charge, physicochemical properties and biocompatibility were assessed. Particles exhibited a micrometer size and a spherical morphology. Chitosan addition to BCG shifted the bacilli surface charge from negative zeta potential values to strongly positive ones. Chitosan of low molecular weight produced particle suspensions of lower size distribution and higher stability, allowing efficient BCG encapsulation and biocompatibility. Particle formulation consistency was improved when the availability of functional groups from alginate and chitosan was close to stoichiometric proportion. Thus, the herein described microparticulate system constitutes a promising strategy to deliver BCG vaccine by the intranasal route.

Nasal delivery of PLG microparticle encapsulated defensin peptides adjuvanted gp41 antigen confers strong and long-lasting immunoprotective response against HIV-1

Defensins display immunostimulatory activities including a chemotactic effect for T lymphocytes/immature dendritic cells and secretion of pro-inflammatory cytokines suggest their role in bridging innate and adaptive immunity. We hypothesized whether defensins with separately emulsified HIV-1 immunogen would elicit peptide-specific systemic and mucosal antibody response in mice. The HIV-1 peptide alone in microsphere showed low peptide-specific antibody response in sera and different washes, while the presence of defensins markedly increased the antibody peak titre both in sera (102,400-409,600) (p < 0.05) and in washes (800-25,600) (p < 0.001). Defensins with HIV-1 peptide were showing 43.0-83.2% and 38.7-72.3% in vitro neutralization against laboratory isolates in serum and lavage samples, respectively, higher than HIV-1 peptide alone. Our findings may have implications in the development of new mucosal adjuvant for AIDS vaccination.

Local and systemic immune responses in mice to intranasal delivery of peptides representing bovine respiratory syncytial virus epitopes encapsulated in poly (DL-lactide-co-glycolide) microparticles

The potential of a microparticulate vaccine delivery system in eliciting a specific mucosal antibody response in the respiratory tract of mice was evaluated. Two vaccine candidate peptides representing epitopes from the G attachment and F fusion antigens from bovine respiratory syncytial virus (BRSV) were encapsulated into poly(DL-lactide co-glycolide) biodegradable microparticles. The encapsulation process did not denature the entrapped peptides as verified by detection of peptide-specific antibodies in mucosal secretions by ELISA using peptide as antigen. Following intranasal immunisation, the encapsulated peptides induced stronger upper and lower respiratory tract specific-IgA responses, respectively, than the soluble peptide forms. Moreover, a strong peptide-specific cell-mediated immune response was measured in splenocytes in vitro from the mice inoculated with the encapsulated peptides compared to their soluble form alone indicating that migration of primed T cells had taken place from the site of mucosal stimulation in the upper respiratory tract to the spleen. These results act as a foundation for vaccine efficacy studies in large animal BRSV challenge models.

Diphtheria toxoid-containing microparticulate powder formulations for pulmonary vaccination: preparation, characterization and evaluation in guinea pigs

In this study, the potential of N-Trimethyl chitosan (TMC, degree of quaternization 50%) and dextran microparticles for pulmonary delivery of diphtheria toxoid (DT) was investigated. The antigen-containing microparticles were prepared by drying of an aqueous solution of polymer and DT through a supercritical fluid (SCF) spraying process. The median volume diameter of the dry particles, as determined by laser diffraction analysis, was between 2 and 3 microm and the fine particle mass fractions smaller than 5 microm, as determined by cascade impactor analysis, were 35 and 56% for the dextran and TMC formulations, respectively. The water content of the particles as measured by Karl-Fischer titration was 2-3% (w/w). Pulmonary immunization with DT-TMC microparticles containing 2 or 10 Lf of DT resulted in a strong immunological response as reflected by the induction of IgM, IgG, IgG subclasses (IgG1 and IgG2) antibodies as well as neutralizing antibody titers comparable to or significantly higher than those achieved after subcutaneous (SC) administration of alum-adsorbed DT (2 Lf). Moreover, the IgG2/IgG1 ratio after pulmonary immunization with DT-TMC microparticles was substantially higher as compared to SC administered alum-adsorbed DT. In contrast, pulmonarily administered DT-dextran particles were poorly immunogenic. Among the tested formulations only pulmonarily administered DT-containing TMC microparticles induced detectable pulmonary secretory IgA levels. In conclusion, in this paper it is demonstrated that TMC microparticles are a potent new delivery system for pulmonary administered DT antigen.

N-Trimethyl chitosan (TMC) nanoparticles loaded with influenza subunit antigen for intranasal vaccination: Biological properties and immunogenicity in a mouse model

In this study, the potential of N-trimethyl chitosan (TMC) nanoparticles as a carrier system for the nasal delivery of a monovalent influenza subunit vaccine was investigated. The antigen-loaded nanoparticles were prepared by mixing a solution containing TMC and monovalent influenza A subunit H3N2 with a tripolyphosphate (TPP) solution, at ambient temperature and pH 7.4 while stirring. The nanoparticles had an average size of about 800 nm with a narrow size distribution and a positive surface charge. The nanoparticles showed a loading efficiency of 78% and a loading capacity of 13% (w/w). It was shown that more than 75% of the protein remained associated with the TMC nanoparticles upon incubation of the particles in PBS for 3h. The molecular weight and antigenicity of the entrapped hemagglutinin was maintained as shown by polyacrylamide gel electrophoresis and Western blotting, respectively. Single i.n. or i.m. immunization with antigen-loaded TMC nanoparticles resulted in strong hemagglutination inhibition and total IgG responses. These responses were significantly higher than those achieved after i.m. administration of the subunit antigen, whereas the IgG1/IgG2a profile did not change substantially. The i.n. administered antigen-TMC nanoparticles induced higher immune responses compared to the other i.n. antigen formulations, and these responses were enhanced by i.n. booster vaccinations. Moreover, among the tested formulations only i.n. administered antigen-containing TMC nanoparticles induced significant IgA levels in nasal washes of all mice. In conclusion, these findings demonstrate that TMC nanoparticles are a potent new delivery system for i.n. administered influenza antigens.

Novel biocompatible anionic polymeric microspheres for the delivery of the HIV-1 Tat protein for vaccine application

Two novel classes of biocompatible core-shell anionic microspheres, composed of an inner hard insoluble core, either made of poly(styrene) (PS) or poly(methyl methacrylate) (PMMA), and a soft outer tentacular shell made of long soluble negatively charged arms derived from the steric stabilizer, hemisuccinated poly(vinyl alcohol) or Eudragit L100/55, respectively, were prepared by dispersion polymerization and characterized. Five types of these novel microspheres, two made of poly(styrene) and hemisuccinated poly(vinyl alcohol) (A4 and A7), and three made of poly(methyl methacrylate) and Eudragit L100/55 (1D, 1E, H1D), differing for chemical composition, size, and surface charge density were analyzed for the delivery of the HIV-1 Tat protein for vaccine applications. All microspheres reversibly adsorbed the native biologically active HIV-1 Tat protein preventing Tat from oxidation and maintaining its biological activity, therefore increasing the shelf-life of the Tat protein vaccine. The microspheres efficiently delivered Tat intracellularly, and were not toxic in vitro nor in mice, even after multiple administrations. These results indicate that these novel microparticles are safe and represent a promising delivery system for vaccination with Tat, as well as for other subunit vaccines, particularly when a native protein conformation is required.

A prolonged immune response to antigen delivered in poly (epsilon-caprolactone) microparticles

A single dose vaccine formulation which induces both humoral and cell-mediated immune responses over a prolonged period would provide a potent weapon against infectious disease. We have used a water-in-oil-in-oil, solvent evaporation method for generating poly epsilon-caprolactone microparticles and tested their ability to induce an immune response against the model antigen ovalbumin. We hypothesized that the initial release of antigen from the surface of the poly epsilon-caprolactone microparticles would act as the priming dose and that the delayed release over the following months, due to diffusion from or break-down of the microparticles, would act as a boost to the immune response. Ovalbumin encapsulated in the poly epsilon-caprolactone microparticles was able to induce both antibody and cell-mediated immune responses. However our results suggest that the spontaneous release had little effect on the immune response. Despite this the response was maintained for at least 8 months following a single immunization. Both humoral and cell-mediated immune responses were induced in mice. This simple method of vaccine formulation offers a cost-efficient way to deliver antigen in a single dose to the immune system.

Biodegradable microparticles for the mucosal delivery of antibacterial and dietary antigens

Mucosal administration of antigen is known to be appropriate for vaccine purposes as well as tolerance induction. Biodegradable poly(DL-lactide-co-glycolide) (PLGA) microparticles were used to deliver both antibacterial phosphorylcholine (PC) and dietary antigen beta lactoglobulin (BLG) by mucosal route. In a first study, the protective immunity elicited by intragastric vaccination with PC encapsulated in microparticles was evaluated in a mouse model against intestinal infection by Salmonella typhimurium and pulmonary infection by Streptococcus pneumoniae. A significant rise in anti-PC immunoglobulin A (IgA) titers, as measured by an enzyme-linked immunosorbent assay, was observed in the intestinal secretions after oral immunization with PC-loaded microparticles compared with the titers of mice immunized with free PC-thyr or blank microparticles. This antibody response correlated with a highly significant resistance to oral challenge by S. typhimurium. IgA in pulmonary secretion were not able to protect against S. pneumoniae infection. BALB/c mice were, therefore, immunized intranasally (i.n.). Immunization was followed by a rise in anti-PC IgA and IgG titers in serum and in pulmonary secretions by both free and encapsulated PC-Thyr. The survival rates were 91 and 76% in the two groups of mice, respectively. In a second study and in order to prevent allergy against milk by inducing oral tolerance, one of the major allergenic milk protein, BLG was entrapped into microparticles. Oral administration of microparticles containing BLG reduced significantly (by 10000) the amount of protein necessary to decrease both specific anti BLG IgE and DTH response. These studies demonstrate the ability of microparticles to induce both mucosal immunity and oral tolerance.

Induction of systemic and mucosal immune response in cattle by intranasal administration of pig serum albumin in alginate microparticles

Biodegradable microparticles are an efficient mucosal delivery system that protect antigens from the harsh mucosal environment and facilitate their uptake by M cells at the epithelium of mucosal-associated lymphoid tissue. In this study, we determined the systemic and mucosal immune response in calves following intranasal and oral immunization with pig serum albumin (PSA) encapsulated in alginate microparticles. The size of the particles ranged from 1 to 50 microm in diameter, with 95% of the particles being smaller than 5 microm. High levels of anti-PSA IgG1 antibodies were found in the serum, nasal secretions, and to a less extent in saliva of calves vaccinated intranasally, but not orally, with PSA-microparticles. There was no significant increase of PSA-specific IgA. A weak lymphocyte proliferative immune response was observed in peripheral blood mononuclear cells (PBMCs), and few anti-PSA antibody-secreting cells (ASC) were detected in the blood of calves immunized intranasally. The combined systemic and mucosal response observed in intranasally immunized animals may be attributed to the wide variation in the size of the alginate microparticles, with smaller particles translocating to regional lymph nodes and inducing a systemic immune response, and larger particles being retained in the NALT and inducing a mucosal immune response. The procedure presented here may be useful as an intranasal vaccine against respiratory diseases in cattle.

The stability of insulin in biodegradable microparticles based on blends of lactide polymers and polyethylene glycol

Insulin-loaded microparticles were produced from blends of poly(ethylene glycol) (PEG) with poly (L-lactide) (PLA) homopolymer and poly (DL-lactide co-glycolide) copolymers (PLG) using a water-in-oil solvent extraction method. The dispersed phase was composed of PLG/PEG or PLA/PEG dissolved in dichloromethane, and the continuous phase was methanol containing 10% PVP. Characteristics, including particle size distribution, insulin loading capacity and efficiencies, in vitro release, degradation and stability, were investigated. The stability of insulin associated with microparticles prepared using PEG and 50:50 PLG and PLA was analysed by HPSEC and quantified by peak area following incubation in PBS at 37 degrees C for up to 1 month. Insulin was successfully entrapped in the PLG/PEG and PLA/PEG microparticles with trapping efficiencies up to 56 and 48%, loading levels 17.8 and 10.6% w/w, and particle sizes 8 and 3 microm, respectively. The insulin-loaded PLG/PEG and PLA/PEG microparticles were capable of controlling the release of insulin over 28 days with in vitro delivery rates of 0.94 and 0.65 microg insulin/mg particles/day in the first 4 days and a steady release with rate of 0.4 and 0.43 microg insulin/mg particles/day over the following 4 weeks, respectively. Extensive degradation of the PLG/PEG microparticles also occurred over 4 weeks, whereas the use of PLA/PEG blends resulted in a stable microparticle morphology and much reduced fragmentation and aggregation of the associated insulin.

Oral tolerance elicited in mice by beta-lactoglobulin entrapped in biodegradable microspheres

Oral administration of antigen is known to be appropriate for some vaccine purposes as well as oral tolerance induction. In the present study, oral administration of beta-lactoglobulin (BLG) loaded poly(D,L-lactide-co-glycolide) (D,L-PLG) microspheres induced tolerance was evaluated. A single feeding of 5 micrograms of encapsulated BLG tolerized BALB/c mice to subsequent BLG parenteral challenge, suppressing the specific humoral, intestinal and cellular responses. The tolerogenic efficient dose was then reduced 10,000 times, compared to oral administration of soluble BLG. This suggests that loading food proteins into D,L-PLG microspheres might be a potential tool for inducing oral tolerance with allergens.

Potential of polymeric lamellar substrate particles (PLSP) as adjuvants for vaccines

In recent years microspheres or microparticles produced from biodegradable polymers such as poly(D,L-lactide) (PLA) and poly(D, L-lactide-co-glycolide) (PLGA) containing encapsulated vaccine antigens have been investigated for administration via parenteral, oral, and intranasal routes. These microparticles allow the controlled release of vaccines with an aim to reduce the number of doses for primary immunisation or to develop single dose vaccines. The polymer materials have been widely regarded as being of minimal toxicity. Evaluation of candidate systems in animal studies have shown antibody levels and cell responses similar to or greater than those observed with adjuvants such as alum. However, there are concerns regarding the integrity and immunogenicity of the antigen during the encapsulation process when the antigen is exposed to organic solvents, high shear stresses and the exposure of antigen to low pH which is caused by polymer degradation. An alternative approach would be to adsorb antigens to the surface of biodegradable polymer particles. Polymeric lamellar substrate particles (PLSP), produced by a simple precipitation of PLA, are suitable for this purpose. The adsorption of antigens onto these particles is a simple procedure. It avoids pH changes due to bulk polymer degradation and the use of solvents and therefore will be less damaging to the vaccine. Moreover, such systems will be much easier to scale up for a clinical study and eventual manufacture. The aim of this article is to discuss the preparation and physical characteristics of PLSP, antigen adsorption, in vivo efficacy of PLSP antigen systems and to consider the potential of PLSP as controlled release adjuvants for protein, peptide or viral vaccines.

Enhanced immune response after subcutaneous and oral immunization with biodegradable PLGA microspheres

PLGA microspheres containing bovine serum albumin (BSA) as a model antigen, were prepared by a double emulsion/solvent extraction method and their in vitro characterization was performed. The same microspheres were used in a series of in vivo studies to evaluate the immune response induced after subcutaneous or oral inoculation following different immunization protocols. The in vivo data confirm that the immunogenicity of the albumin is not affected by the encapsulation procedure. The subcutaneous administration of microspheres showed an immune response (serum IgG levels by ELISA) statistically above BSA solution, even when the dose administered was 10 times lower. The adjuvanticity of the microspheres was found to be comparable to that of Freund's complete adjuvant (FCA), but in contrast to FCA they are biocompatible and did not induce any adverse reaction at the site of injection. A single oral administration of the microspheres was not a successful strategy for the induction of a reproducible response. Therefore, microspheres of 1 and 5 micrometer were orally administered on 3 consecutive days and the response obtained showed that the use of a boosting dose was not necessary for the 1 micrometer particles. These results suggest the possibility of simplifying the immunization schedule to a primary immunization if 1 micrometer particles are administered.

Analysis of local and systemic immunological responses after intra-tracheal, intra-nasal and intra-muscular administration of microsphere co-encapsulated Yersinia pestis sub-unit vaccines

Intra-tracheal, intra-nasal and intra-muscular immunisation with admixed Y. pestis sub-units (3 micrograms V, 0.47 microgram F1) or equivalent doses of poly-L-lactide microsphere co-encapsulated antigens was done. Systemic and mucosal responses to F1 and V differed according to immunisation route, and encapsulated status of the sub-units. Irrespective of immunisation site, particulated sub-units stimulated statistically superior primary systemic reactions, with intra-tracheal and nasal microsphere immunisations eliciting superior serum anti-V IgG titres in comparison to intra-muscular injection of free vaccines (p < 0.001 beyond day 8). Pulmonary and nasal delivery of microspheres induced primary serum anti-V IgG titres which were greater (p < 0.039) or equal to (p > 0.056) those after intra-muscular injection of spheres. In terms of serum anti-F1 titres, mice responded best to intra-muscular, and comparatively poorly to intra-nasal immunisations. Intra-tracheal administration of microspheres induced strongest responses in the respiratory tract, dominated by the IgG rather than IgA isotype. An intra-nasal booster immunisation on day 63 potentiated strong local and circulating anti-V IgG titres in microsphere vaccinees. Priming and boosting with free vaccines induced significantly depressed secondary serum anti-F1 titres relative to microsphere immunisations (p < 0.024 at days 78 and 120). In contrast to other priming sites, intra-tracheal instillation of encapsulated vaccines facilitated the induction of IgG antibody to both F1 and V in day 146 broncho-alveolal washings. With the exception of primary responses to F1 in mice immunised intra-tracheally with microspheres, IgG1 was the dominant subclass of anti-F1/V IgG in serum. We conclude that introduction of biodegradable microspheres containing the F1 and V sub-units into to the upper or lower respiratory tract engenders immune responses of a magnitude comparable with that induced by parenteral immunisation, and may present a means of protecting individuals from plague.

Intra nasal administration of poly-lactic acid microsphere co-encapsulated Yersinia pestis subunits confers protection from pneumonic plague in the mouse

Equivocal doses of soluble, or high molecular weight poly (lactic acid) microsphere co-encapsulated, F1 and V subunit antigens of Yersinia pestis were used to immunize mice intra-nasally. Animals were dosed on day 1 and 7 with 2.724 micrograms V plus 0.956 micrograms F1. Co-encapsulated antigens induced superior systemic and mucosal immunity in comparison with free F1 and V. All of the mice immunized with soluble antigens died shortly after an aerosol challenge consisting of 1 x 10(5) colony-forming units of plague bacteria. In contrast, 66% of the co-encapsulated subunit vaccinees survived this lethal challenge. Humoral immunity to plague was improved further, resulting in 80% protection from challenge, if a relatively high dose (10 micrograms) of cholera toxin B subunit was added to the microsphere suspension prior to intra-nasal delivery. Significantly, by adding 10 micrograms cholera toxin B subunit to the free antigen solution, a 100% post-challenge survival rate was attained. We conclude that in this animal model of pneumonic plague, intra-nasal administration of microgram quantities of Yersinia pestis subunits confers protective immunity, provided the vaccines are microencapsulated or admixed with a strong mucosal adjuvant, such as the cholera toxin B subunit.

Clinical immunology

Images