Development andin vitroevaluation of an oral SEDDS for desmopressin

Histidine-based ionizable cationic surfactants: novel biodegradable agents for hydrophilic macromolecular drug delivery

The aim of this study was to design surfactants based on histidine (His) for hydrophobic ion-pairing and evaluate their safety and efficacy. Lauryl, palmitoyl and oleyl alcohol, as well as 2-hexyl-1-decanol were converted into surfactants with histidine as head-group via esterification. The synthesized His-surfactants were characterized regarding pKa, critical micellar concentration (CMC), biodegradability, toxicity on Caco-2 cells, and ability to provide endosomal escape. Furthermore, the suitability of these agents to be employed as counterions in hydrophobic ion pairing was evaluated. Chemical structures were confirmed by 1H-NMR, FT-IR, and MS. The synthesized surfactants showed pKa values ranging from 4.9 to 6.0 and CMC values in the range of 0.3 to 7.0 mM. Their biodegradability was proven by enzymatic cleavage within 24 h. Below the CMC, His-surfactants did not show cytotoxic effects on Caco-2 cells (cell viability > 80%). All His-surfactants showed the ability to provide endosomal escape in a pH-dependent manner in the range of 5.2 to 6.8. Complexes formed between His-surfactants and heparin or plasmid DNA (pDNA) via hydrophobic ion pairing showed at least 100-fold higher lipophilicity than the correspondent model drugs. According to these results, His-surfactants might be a promising safe tool for delivering hydrophilic macromolecular drugs and nucleic acids.

Construction of injectable micron-sized polymorphic vesicles for prolonged local anesthesia with weekly sustained release of ropivacaine

Currently, to overcome the short half-life of the local anesthetic ropivacaine, drug delivery systems such as nanoparticles and liposomes have been used to prolong the analgesic effect, but they are prone to abrupt release from the site of administration or have poor slow-release effects, which increases the risk of cardiotoxicity. In this study, injectable lipid suspensions based on ropivacaine-docusate sodium hydrophobic ion pairing (HIP) were designed to significantly prolong the duration of analgesia. The resulting ion-paired lipid suspension (HIP/LIPO) had a micrometer scale and a high zeta potential, which facilitates stable in situ retention. The strong interaction between docusate sodium and ropivacaine was verified using thermal and spectroscopic analyses, and the formation of micron-sized polymorphic vesicles was attributed to the mutual stabilizing interactions between ropivacaine-docusate sodium HIP, docusate sodium and lecithin. The HIP/LIPO delivery system could maintain drug release for more than 5 days in vitro and achieve high analgesic efficacy for more than 10 days in vivo, reducing the side effects associated with high drug doses. The stable HIP/LIPO delivery system is a promising strategy that offers a clinically beneficial alternative for postoperative pain management and other diseases.

Pancreatic lipase digestion: The forgotten barrier in oral administration of lipid-based delivery systems?

This review highlights the importance of controlling the digestion process of orally administered lipid-based delivery systems (LBDS) and their performance. Oral LBDS are prone to digestion via pancreatic lipase in the small intestine. Rapid or uncontrolled digestion may cause the loss of delivery system integrity, its structural changes, reduced solubilization capacity and physical stability issues. All these events can lead to uncontrolled drug release from the digested LBDS into the gastrointestinal environment, exposing the incorporated drug to precipitation or degradation by luminal proteases. To prevent this, the digestion rate of orally administered LBDS can be estimated by appropriate choice of the formulation type, excipient combinations and their ratios. In addition, in vitro digestion models like pH-stat are useful tools to evaluate the formulation digestion rate. Controlling digestion can be achieved by conventional lipase inhibitors like orlistat, sterically hindering of lipase adsorption on the delivery system surface with polyethylene glycol (PEG) chains, lipase desorption or saturation of the interface with surfactants as well as formulating LBDS with ester-free excipients. Recent in vivo studies demonstrated that digestion inhibition lead to altered pharmacokinetic profiles, where Cmax and Tmax were reduced in spite of same AUC compared to control or even improved oral bioavailability.

Self-emulsifying drug delivery systems: A versatile approach to enhance the oral delivery of BCS class III drug via hydrophobic ion pairing

Biopharmaceutical classification systems (BCS) class III drugs belongs to a group of drugs with high solubility in gastrointestinal (GI) fluids and low membrane permeability result in significantly low bioavailability. Self-emulsifying drug delivery systems (SEDDS) considered a suitable candidate to enhance the bioavailability of poorly soluble drugs by improving their membrane permeability, however, incorporating hydrophilic drugs in to these carriers remained a great challenge. The aim of this study was to develop hydrophobic ion pairs (HIPs) of a model BCS class-III drug tobramycin (TOB) in order to incorporate into SEDDS and improve its bioavailability. HIPs of TOB were formulated using anionic surfactants sodium docusate (DOC) and sodium dodecanoate (DOD). The efficiency of HIPs was estimated by measuring the concentration of formed complexes in water, zeta potential determination and log P value evaluation. Solubility studies of HIPs of TOB with DOC were accomplished to screen the suitable excipients for SEDDS development. Consequently, HIPs of TOB with DOC were loaded into SEDDS and assessed the log DSEDDS/release medium and dissociation of these complexes at different intestinal pH over time. Moreover, cytotoxic potential of HIPs of TOB and HIPs loaded SEDDS formulations was evaluated. HIPs of TOB with DOC exhibited the maximum precipitation efficiency at a stoichiometric ratio of 1:5. Log P of HIPs of TOB improved up to 1500-fold compared to free TOB. Zeta potential of TOB was shifted from positive to negative during hydrophobic ion pairing (HIP). HIPs of TOB with DOC was loaded at a concentration of 1% (w/v) into SEDDS formulations. Log DSEDDS/release medium of loaded complexes in to oily droplets was above 2 and dissociated up to 20% at various pH within 4 h. Finding of this study suggested that improvement of the lipophilic character of BCS class-III drugs followed by incorporation into oily droplets can be deliberated as a promising tool to enhance the permeation across biological membranes.

A new oral self-emulsifying drug delivery system improves the antileishmania efficacy of fexinidazole in vivo

The aim of this study was to develop, characterize and evaluate the in vivo oral efficacy of self-emulsifying drug delivery systems (SEDDS) containing fexinidazole (FEX) in the experimental treatment of visceral leishmaniasis (VL). The developed FEX-SEDDS formulation presented as a clear, yellowish liquid, with absence of precipitate. The droplet size, polydispersion index and zeta potential after dilution in water (1:200) was of 91 ± 3 nm, 0.242 ± 0.005 and -16.7 ± 0.2, respectively. In the simulated gastric and intestinal media, the FEX-SEDDS had a size of 97 ± 1 and 106 ± 9 nm, respectively. The FEX retention in droplet after SEDDS dilution in simulated gastrointestinal media was almost 100 %. Antileishmanial efficacy studies showed that FEX-SEDDS was the only treatment able to significantly (p < 0.05) reduce the parasite burden in the liver and spleen of animals experimentally infected with Leishmania infantum. Our intestinal permeability data suggest that FEX-SEDDS showed no evidence of injury to the intestinal mucosa. These findings suggest that FEX-SEDDS can be a promising oral alternative for the treatment of VL caused by L. infantum.

Hydrophobic ion pairing-based self-emulsifying drug delivery systems: a new strategy for improving the therapeutic efficacy of water-soluble drugs

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are formulations consisting of oil phase, emulsifiers, and co-emulsifiers, which can be spontaneously emulsified in the body to form O/W microemulsion. Traditionally, SEDDS are used commercially for the improvement of oral absorption and in vivo performances for poorly water-soluble drugs. However, SEDDS formulations were rarely reported for the delivery of water-soluble drugs. Recent studies have found that SEDDS have the potential for water-soluble macromolecular drugs by the application of the hydrophobic ion pairing (HIP) technology.

AREAS COVERED

This review summarized the characteristics of HIP complexes in SEDDS and introduced their advantages and discussed the future prospects of HIP-based SEDDS in drug delivery.

EXPERT OPINION

Hydrophobic ion pairing (HIP) is a technology that combines lipophilic structures on polar counterions to increase the lipophilicity through electrostatic interaction. Recent studies showed that HIP-based SEDDS offer an effective way to increase the mucosal permeability and improve the chemical stability for antibiotics, proteases, DNA-based drugs, and other water-soluble macromolecular drugs. It is believed that HIP-based SEDDS offer a potential and attractive method capable of delivering hydrophilic macromolecules with ionizable groups for oral administration.

SEDEX-Self-Emulsifying Delivery Via Hot Melt Extrusion: A Continuous Pilot-Scale Feasibility Study

The aim of this study was to develop a continuous pilot-scale solidification and characterization of self-emulsifying drug delivery systems (SEDDSs) via hot melt extrusion (HME) using Soluplus^® and Kollidon^® VA-64. First, an oil-binding capacity study was performed to estimate the maximal amount of SEDDSs that the polymers could bind. Then, HME was conducted using a Coperion 18 mm ZSK18 pilot plant-scale extruder with split-feeding of polymer and SEDDS in 10, 20, and 30% w/w SEDDSs was conducted. The prepared extrudates were characterized depending on appearance, differential scanning calorimetry, wide-angle X-ray scattering, emulsification time, droplet size, polydispersity index, and cloud point. The oil-binding studies showed that the polymers were able to bind up to 50% w/w of liquid SEDDSs. The polymers were processed via HME in a temperature range between 110 and 160 °C, where a plasticizing effect of the SEDDSs was observed. The extrudates were found to be stable in the amorphous state and self-emulsified in demineralized water at 37 °C with mean droplet sizes between 50 and 300 nm. A cloud point and phase inversion were evident in the Soluplus^® samples. In conclusion, processing SEDDSs with HME could be considered a promising alternative to the established solidification techniques as well as classic amorphous solid dispersions for drug delivery.

Development and In Vitro Characterization of Transferrin-Decorated Nanoemulsion Utilizing Hydrophobic Ion Pairing for Targeted Cellular Uptake

Purpose

The aim of this study was to develop transferrin-conjugated nanoemulsions utilizing hydrophobic ion pairing for a targeted cellular uptake.

Methods

In the lipophilic phase of nanoemulsion composed of 60% oleic acid, 30% Capmul MCM EP and 10% Span 85, 1% cetyltrimethylammonium bromide (CTAB) and 3% phosphatidic acid (PA) were incorporated. After emulsification, the resulting droplets were decorated with human protein transferrin via hydrophobic ion pairing with PA and characterized regarding droplet size and zeta potential. Subsequently, cellular uptake of transferrin-conjugated nanoemulsion was investigated on Caco-2 and HeLa cell lines and determined by flow cytometry, cell lysis method and live cell imaging using confocal laser scanning microscopy.

Results

The nanoemulsion showed a droplet size of 123.03 ± 2.1 nm and zeta potential of − 54.5 mV that changed because of the surface decoration with transferrin to 182.7 ± 0.2 and + 30.2 mV, respectively. Within the uptake studies utilizing flow cytometry, transferrin-conjugated nanoemulsion showed a 5.2-fold higher uptake in Caco-2 cells and twofold improvement in case of HeLa cells compared with unmodified formulation. The outcome was confirmed visually via live cell imaging.

Conclusion

According to the results, transferrin-conjugated nanoemulsion might be considered as a promising drug delivery system for a selective receptor-mediated drug delivery.

Lipid-based solubilization technology via hot melt extrusion: promises and challenges

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are a promising strategy to improve the oral bioavailability of poorly water-soluble drugs (PWSD). The excipients of SEDDS enable permeation through the mucus and gastro-intestinal barrier, inhibiting efflux transporters (e.g. P-glycoprotein) of drugs. Poor drug loading capacity and formulation instability are the main setbacks of traditional SEDDS. The use of polymeric precipitation inhibitors was shown to create supersaturable SEDDS with increased drug payload, and their solidification can help to overcome the instability challenge. As an alternative to several existing SEDDS solidification technologies, hot melt extrusion (HME) holds the potential for lean and continuous manufacturing of supersaturable solid-SEDDS. Despite being ubiquitously applied in solid lipid and polymeric processing, HME has not yet been widely considered for the preparation of SEDDS.

AREAS COVERED

The review begins with the rationale why SEDDS as the preferred lipid-based delivery systems (LBDS) is suitable for the oral delivery of PWSD and discusses the common barriers to oral administration. The potential of LBDS to surmount them is discussed. SEDDS as the flagship of LBDS for PWSD is proposed with a special emphasis on solid-SEDDS. Finally, the opportunities and challenges of HME from the lipid-based excipient (LBE) processing and product performance standpoint are highlighted.

EXPERT OPINION

HME can be a continuous, solvent-free, cost-effective, and scalable technology for manufacturing solid supersaturable SEDDS. Several critical formulations and process parameters in successfully preparing SEDDS via HME are identified.

Papain-Decorated Mucopenetrating SEDDS: A Tentative Approach to Combat Absorption Issues of Acyclovir via the Oral Route

The aim of the current study was to enhance the oral bioavailability of Acyclovir (ACV) based on the papain-functionalized self-emulsifying drug delivery systems (SEDDS). The optimum control SEDDS formulation comprised of kolliphore (40%), transcutol (30%), propylene glycol (20%) and oleoyl chloride (10%). However, in the targeted SEDDS formulation, oleoyl chloride was replaced with oleoyl chloride-papain (OC-PAP) conjugate that was synthesized via an amide bond formation between the acyl halide groups of oleoyl chloride and the amino group of papain. Prior to adding in the SEDDS formulation, the newly synthesized conjugate was evaluated quantitatively by a Bradford assay that demonstrated 45 µg of papain contents per mg of the conjugate. Moreover, the conjugate formation was qualitatively confirmed through FTIR analysis and thin layer chromatography. ACV (a BCS class III drug) was incorporated into the SEDDS formulations after being hydrophobically ion paired with sodium deoxycholate, thereby making it lipophilic. The drug-loaded formulations were emulsified in the 0.1 M phosphate buffer (pH 6.8) and evaluated in vitro with respect to drug release and rabbit mucosal permeation studies. Both the formulations illustrated a very comparable drug release over a period of 4 h, afterwards, the OC-PAP-based formulation demonstrated a more sustaining effect. The extent of mucus diffusion evaluated via the silicon tube method demonstrated a 4.92-fold and a 1.46-fold higher penetration of the drug, a 3.21-fold and a 1.56-fold higher permeation through the rabbit intestinal mucus layer, and a 22.94-fold and a 2.27-fold higher retention of the drug over the intact mucosa of rabbit intestine, illustrated by OC-PAP-based nanoemulsions compared to the drug-free solution and controlled nanoemulsion, respectively. According to these in vitro results, papain-functionalized SEDDS is a promising approach for the oral delivery of ACV and many other drugs with oral bioavailability issues, however, in vivo studies in this respect have to be employed before making a comprehensive conclusion.

Synthesis and evaluation of sulfosuccinate-based surfactants as counterions for hydrophobic ion pairing

Hydrophobic ion pairing is a promising strategy to raise the lipophilic character of therapeutic peptides and proteins. In past studies, docusate, an all-purpose surfactant with a dialkyl sulfosuccinate structure, showed highest potential as hydrophobic counterion. Being originally not purposed for hydrophobic ion pairing, it is likely still far away from the perfect counterion. Thus, within this study, docusate analogues with various linear and branched alkyl residues were synthesized to derive systematic insights into which hydrophobic tail is most advantageous for hydrophobic ion pairing, as well as to identify lead counterions that form complexes with superior hydrophobicity. The successful synthesis of the target compounds was confirmed by FT-IR, ¹H-NMR, and ¹³C-NMR. In a screening with the model protein hemoglobin, monostearyl sulfosuccinate, dioleyl sulfosuccinate, and bis(isotridecyl) sulfosuccinate were identified as lead counterions. Their potential was further evaluated with the peptides and proteins vancomycin, insulin, and horseradish peroxidase. Dioleyl sulfosuccinate and bis(isotridecyl) sulfosuccinate significantly increased the hydrophobicity of the tested peptides and proteins determined as logP or lipophilicity determined as solubility in 1-octanol, respectively, in comparison to the gold standard docusate. Dioleyl sulfosuccinate provided an up to 8.3-fold higher partition coefficient and up to 26.5-fold higher solubility in 1-octanol than docusate, whereas bis(isotridecyl) sulfosuccinate resulted in an up to 6.7-fold improvement in the partition coefficient and up to 44.0-fold higher solubility in 1-octanol. The conjugation of highly lipophilic alkyl tails to the polar sulfosuccinate head group allows the design of promising counterions for hydrophobic ion pairing. STATEMENT OF SIGNIFICANCE: Hydrophobic ion pairing enables efficient incorporation of hydrophilic molecules into lipid-based formulations by forming complexes with hydrophobic counterions. Docusate, a sulfosuccinate with two branched alkyl tails, has shown highest potential as anionic hydrophobic counterion. As it was originally not purposed for hydrophobic ion pairing, its structure is likely still far away from the perfect counterion. To improve its properties, analogues of docusate with various alkyl tails were synthesized in the present study. The investigation of different alkyl residues allowed to derive systematic insights into which tail structures are most favorable for hydrophobic ion pairing. Moreover, the lead counterions dioleyl sulfosuccinate and bis(isotridecyl) sulfosuccinate bearing highly lipophilic alkyl tails provided a significant improvement in the hydrophobicity of the resulting complexes.

Fundamental Aspects of Lipid-Based Excipients in Lipid-Based Product Development

Poor aqueous solubility of drugs is still a foremost challenge in pharmaceutical product development. The use of lipids in designing formulations provides an opportunity to enhance the aqueous solubility and consequently bioavailability of drugs. Pre-dissolution of drugs in lipids, surfactants, or mixtures of lipid excipients and surfactants eliminate the dissolution/dissolving step, which is likely to be the rate-limiting factor for oral absorption of poorly water-soluble drugs. In this review, we exhaustively summarize the lipids excipients in relation to their classification, absorption mechanisms, and lipid-based product development. Methodologies utilized for the preparation of solid and semi-solid lipid formulations, applications, phase behaviour, and regulatory perspective of lipid excipients are discussed.

Vasopressin and Its Analogues: From Natural Hormones to Multitasking Peptides

Human neurohormone vasopressin (AVP) is synthesized in overlapping regions in the hypothalamus. It is mainly known for its vasoconstricting abilities, and it is responsible for the regulation of plasma osmolality by maintaining fluid homeostasis. Over years, many attempts have been made to modify this hormone and find AVP analogues with different pharmacological profiles that could overcome its limitations. Non-peptide AVP analogues with low molecular weight presented good affinity to AVP receptors. Natural peptide counterparts, found in animals, are successfully applied as therapeutics; for instance, lypressin used in treatment of diabetes insipidus. Synthetic peptide analogues compensate for the shortcomings of AVP. Desmopressin is more resistant to proteolysis and presents mainly antidiuretic effects, while terlipressin is a long-acting AVP analogue and a drug recommended in the treatment of varicose bleeding in patients with liver cirrhosis. Recently published results on diverse applications of AVP analogues in medicinal practice, including potential lypressin, terlipressin and ornipressin in the treatment of SARS-CoV-2, are discussed.

Oral delivery of therapeutic peptides and proteins: Technology landscape of lipid-based nanocarriers

The oral administration of therapeutic peptides and proteins is favoured from a patient and commercial point of view. In order to reach the systemic circulation after oral administration, these drugs have to overcome numerous barriers including the enzymatic, sulfhydryl, mucus and epithelial barrier. The development of oral formulations for therapeutic peptides and proteins is therefore necessary. Among the most promising formulation approaches are lipid-based nanocarriers such as oil-in-water nanoemulsions, self-emulsifying drug delivery systems (SEDDS), solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), liposomes and micelles. As the lipophilic character of therapeutic peptides and proteins can be tremendously increased such as by the formation of hydrophobic ion pairs (HIP) with hydrophobic counter ions, they can be incorporated in the lipophilic phase of these carriers. Since gastrointestinal (GI) peptidases as well as sulfhydryl compounds such as glutathione and dietary proteins are too hydrophilic to enter the lipophilic phase of these carriers, the incorporated therapeutic peptide or protein is protected towards enzymatic degradation as well as unintended thiol/disulfide exchange reactions. Stability of lipid-based nanocarriers towards lipases can be provided by the use to excipients that are not or just poorly degraded by these enzymes. Nanocarriers with a size <200 nm and a mucoinert surface such as PEG or zwitterionic surfaces exhibit high mucus permeating properties. Having reached the underlying absorption membrane, lipid-based nanocarriers enable paracellular and lymphatic drug uptake, induce endocytosis and transcytosis or simply fuse with the cell membrane releasing their payload into the systemic circulation. Numerous in vivo studies provide evidence for the potential of these delivery systems. Within this review we provide an overview about the different barriers for oral peptide and protein delivery, highlight the progress made on lipid-based nanocarriers in order to overcome them and discuss strengths and weaknesses of these delivery systems in comparison to other technologies.

Do Macrocyclic Peptide Drugs Interact with Bile Salts under Simulated Gastrointestinal Conditions?

Peptide drugs face several barriers to oral delivery, including enzymatic degradation in the gastrointestinal tract and low membrane permeability. Importantly, the direct interaction between various biorelevant colloids (i.e., bile salt micelles and bile salt-phospholipid mixed micelles) present in the aqueous gastrointestinal environment and peptide drug molecules has not been studied. In this work, we systematically characterized interactions between a water-soluble model peptide drug, octreotide, and a range of physiologically relevant bile salts in solution. Octreotide membrane flux in pure bile salt solutions and commercially available biorelevant media, i.e., fasted state simulated intestinal fluid (FaSSIF) and fed state simulated intestinal fluid (FeSSIF), was evaluated using a side-by-side diffusion cell equipped with a cellulose dialysis membrane. All seven micellar bile salt solutions as well as FaSSIF and FeSSIF decreased octreotide membrane flux, and dihydroxy bile salts were found to have a much larger effect than trihydroxy bile salts. An inverse relationship between octreotide membrane flux and pancreatic enzymatic stability was also observed; bile salt micelles and bile salt-phospholipid mixed micelles provided a protective effect toward enzymatic degradation and prolonged octreotide half-life in vitro. Diffusion ordered nuclear magnetic resonance (DOSY NMR) spectroscopy and dynamic light scattering (DLS) were used as complementary experimental techniques to confirm peptide-micelle interactions in solution. Experiments were also performed using desmopressin as a second model peptide drug; desmopressin interacted with bile salts in solution, albeit to a lower extent relative to octreotide. The findings described herein demonstrate that amphiphilic, water-soluble peptide drugs do interact with bile salts and phospholipids in solution, with an effect on peptide membrane flux and enzymatic stability. Correspondingly, oral peptide drug absorption and bioavailability may be impacted.

Experimental Design Based Optimization and Ex Vivo Permeation of Desmopressin Acetate Loaded Elastic Liposomes Using Rat Skin

The study aimed to develop elastic-liposome-based transdermal delivery of desmopressin acetate for enhanced permeation to control enuresis, central diabetes insipidus, and traumatic injury. Elastic liposomes (ELs)-loaded desmopressin acetate was prepared, optimized, and evaluated for improved transdermal permeation profiles using rat skin. Full factorial design with independent factors (X₁ for lipid and X₂ for surfactant) at three levels was used against four responses (Y₁, Y₂, Y₃, and Y₄) (dependent variables). Formulations were characterized for vesicle size, polydispersity index (PDI), zeta potential, % entrapment efficiency (% EE), in vitro drug release, in vitro hemolysis potential, ex vivo drug permeation and drug deposition (DD), and ex vivo vesicle–skin interaction using scanning electron microscopy studies. The optimized formulation ODEL1 based on desirability function was found to have vesicle size, % EE, % DR, and permeation flux values of 118.7 nm, 78.9%, 75.1%, and 5.3 µg/h·cm², respectively, which were close to predicted values. In vitro release profiles indicated slow and sustained delivery. Permeation flux values of ODEL1 and ODEL2 were 5.3 and 3.1 µg/h·cm², respectively, which are 7.5- and 4.4-fold higher as compared to DS (0.71 µg/h·cm²). The obtained flux was relatively higher than the clinical target value of the drug for therapeutic efficacy. Moreover, the DD value of ODEL1 was significantly higher than ODEL2 and DS. Hemocompatibility study confirmed safety concerns. Finally, vesicle–skin interaction corroborated mechanistic views of permeation through rat skin. Conclusively, the transdermal delivery may be a suitable alternative to oral and nasal delivery to treat nocturnal enuresis, central diabetes insipidus, hemophilia A and von Willebrand’s disease, and any traumatic injuries.

Lipophilic Salts and Lipid-Based Formulations: Enhancing the Oral Delivery of Octreotide

PURPOSE

Successful oral peptide delivery faces two major hurdles: low enzymatic stability in the gastro-intestinal lumen and poor intestinal membrane permeability. While lipid-based formulations (LBF) have the potential to overcome these barriers, effective formulation of peptides remains challenging. Lipophilic salt (LS) technology can increase the apparent lipophilicity of peptides, making them more suitable for LBF.

METHODS

As a model therapeutic peptide, octreotide (OCT) was converted to the docusate LS (OCT.DoS₂), and compared to the commercial acetate salt (OCT.OAc₂) in oral absorption studies and related in vitro studies, including parallel artificial membrane permeability assay (PAMPA), Caco-2, in situ intestine perfusion, and simulated digestion in vitro models. The in vivo oral absorption of OCT.DoS₂ and OCT.OAc₂ formulated in self-emulsifying drug delivery systems (SEDDS) was studied in rats.

RESULTS

LS formulation improved the solubility and loading of OCT in LBF excipients and OCT.DoS₂ in combination with SEDDS showed higher OCT absorption than the acetate comparator in the in vivo studies in rats. The Caco-2 and in situ intestine perfusion models indicated no increases in permeability for OCT.DoS₂. However, the in vitro digestion studies showed reduced enzymatic degradation of OCT.DoS₂ when formulated in the SEDDS formulations. Further in vitro dissociation and release studies suggest that the enhanced bioavailability of OCT from SEDDS-incorporating OCT.DoS₂ is likely a result of higher partitioning into and prolonged retention within lipid colloid structures.

CONCLUSION

The combination of LS and LBF enhanced the in vivo oral absorption of OCT primarily via the protective effect of LBF sheltering the peptide from gastrointestinal degradation.

Imine bond formation as a tool for incorporation of amikacin in self-emulsifying drug delivery systems (SEDDS)

AIM

The aim was to develop a self-emulsifying drug delivery system (SEDDS) for amikacin via imine bond formation with hydrophobic aldehydes.

METHODS

Trans-2, cis-6-nonadienal, trans-cinnamaldehyde, citral and benzaldehyde were conjugated to amikacin at pH 8.5. Based on results of precipitation efficiency, Fourier-transform infrared spectroscopy (FTIR) and NMR analysis, amikacin-trans-cinnamaldehyde conjugates were further characterized regarding log P_{octanol/water} via HPLC. The release of amikacin from the amikacin-trans-cinnamaldehyde conjugates was examined through in vitro incubation with bovine serum albumin (BSA). SEDDS containing the amikacin-trans-cinnamaldehyde conjugates were tested regarding mean droplet size (MDS), polydispersity index (PDI), log D_{SEDDS/release medium} and cell viability.

RESULTS

Trans-cinnamaldehyde formed the most hydrophobic conjugates with amikacin whereas benzaldehyde did not form hydrophobic conjugates at all. Imine bond formation was confirmed by FTIR and NMR analysis. The highest increase in log P was achieved for the amikacin-trans-cinnamaldehyde conjugate in a molar ratio of 1:5, shifting from -8.58 up to 1.59. Incubation of this conjugate with BSA led to the formation of BSA-trans-cinnamaldehyde releasing in turn amikacin. SEDDS based on Capmul MCM, Cremophor EL and propylene glycol containing the conjugate demonstrated a MDS of 61.4 nm and PDI of 0.265. Log D_{SEDDS/release medium} was calculated to be 3.38. Cell viability studies showed very good tolerability of conjugate loaded SEDDS in concentrations of 0.1% - 0.5%.

CONCLUSION

Imine bond formation of amikacin with trans-cinnamaldehyde and the incorporation of the resulting conjugate into SEDDS represents a promising strategy for oral delivery of amikacin.

The Role of Counter-Ions in Peptides-An Overview

Peptides and proteins constitute a large group of molecules that play multiple functions in living organisms. In conjunction with their important role in biological processes and advances in chemical approaches of synthesis, the interest in peptide-based drugs is still growing. As the side chains of amino acids can be basic, acidic, or neutral, the peptide drugs often occur in the form of salts with different counter-ions. This review focuses on the role of counter-ions in peptides. To date, over 60 peptide-based drugs have been approved by the FDA. Based on their area of application, biological activity, and results of preliminary tests they are characterized by different counter-ions. Moreover, the impact of counter-ions on structure, physicochemical properties, and drug formulation is analyzed. Additionally, the application of salts as mobile phase additives in chromatographic analyses and analytical techniques is highlighted.

Mucolytic self-emulsifying drug delivery systems (SEDDS) containing a hydrophobic ion-pair of proteinase

AIM

The aim of this study was to form hydrophobic ion-pairs of proteinase with cationic surfactants and to incorporate them into self-emulsifying drug delivery systems (SEDDS) to improve their mucus permeating properties.

METHODS

Proteinase was ion-paired with benzalkonium chloride (BAK), hexadecylpyridinium chloride (HDP), alkyltrimethylammonium bromide (ATA) and hexadecyltrimethylammonium bromide (HDT) at pH 8.5-9.0, and subsequently incorporated into SEDDS consisting of Cremophor EL, propylene glycol, and Capmul 808-G (40/20/40). Mucus permeation of SEDDS containing proteinase complexes was evaluated via rotating tube technique and cell-free Transwell® insert system. Additionally, enzymatic activity of proteinase complexes as well as their potential cytotoxicity was evaluated.

RESULTS

Among all tested hydrophobic ion-pairs, proteinase/BAK showed highest potential. Mucus diffusion of SEDDS containing proteinase/BAK complex yielded in 2.3-fold and 2.5-fold higher mucus permeability with respect to blank SEDDS at Transwell® insert system and rotating tube technique, respectively. Furthermore, proteinase/BAK complex maintained the highest enzymatic activity of 50.5 ± 5.6% compared to free proteinase. At a SEDDS concentration as low as 0.006% cell viability was just 80%. The addition of proteinase complexes to SEDDS increased cytotoxicity on Caco-2 cells in a concentration-dependent manner.

CONCLUSION

SEDDS loaded with proteinase/BAK complexes are promising nanocarriers because of enhanced mucus permeating properties.

Hydrophobic ion pairing (HIP) of (poly)peptide drugs: Benefits and drawbacks of different preparation methods

In order to incorporate hydrophilic macromolecular drugs into lipid-based formulations (LBF), HIP has shown great potential. In this study, different HIP methods were compared with each other. Hydrophobic complexes were formed between bovine serum albumin (BSA) and either dodecyl sulfate, cetyl trimethylammonium or 1,2-dipalmitoyl-sn-glycero-3-phosphate applying the organic solvent-free method, Bligh-Dyer method and biphasic metathesis reaction either with ethyl acetate or chloroform as organic phase. Complex formation efficiency was determined. Hydrophobicity of the obtained complexes was characterized by their apparent partition coefficient between 1-butanol and water. The highest complex formation efficiency was achieved with the Bligh-Dyer method, followed by the organic solvent-free method and the biphasic metathesis reaction. When applying the organic solvent-free method, complex formation efficiency was hampered at higher surfactant concentrations due to the formation of micelles. Furthermore, this method could only be applied for water-soluble compounds. On the contrary, the Bligh-Dyer method was robust towards high surfactant concentrations. Moreover, it enables the use of water-insoluble compounds. The rank order Bligh-Dyer method > organic solvent-free method > biphasic metathesis reaction was confirmed by the log D. According to these results, the Bligh-Dyer method appears advantageous for HIP. However, the organic-solvent free method is an adequate alternative for water-soluble compounds.

Novel self-nanoemulsifying drug-delivery system enhances antileukemic properties of all-trans retinoic acid

Aim: All- trans retinoic acid (ATRA) shows erratic oral bioavailability when administered orally against leukemia, which can be solved through its incorporation in self-nanoemulsifying drug-delivery systems (SEDDS). The SEDDS developed contained a hydrophobic ion pair between benzathine (BZT) and ATRA and was enriched with tocotrienols by the input of a palm oil tocotrienol rich fraction (TRF) in its composition. Results: SEDDS-TRF-ATRA-BZT allowed the formation of emulsions with nanometric size that retained ATRA within their core after dispersion. Pharmacokinetic parameters after oral administration of SEDDS-TRF-ATRA-BZT in mice were improved compared with what was seen for an ATRA solution. Moreover, SEDDS-TRF-ATRA-BZT had improved activity against HL-60 cells compared with SEDDS without TRF. Conclusion: SEDDS-TRF-ATRA-BZT is a promising therapeutic choice over ATRA conventional medicine.

Protection of Protein Drugs by Self-Emulsified Nanoemulsion Against Proteolysis

The present study aimed to develop a self-emulsified nanoemulsion for salmon calcitonin (sCT) for non-invasive delivery. Hydrophobic ion pairing method was used to form hydrophobic complex of sCT with 4 counter ions (oleate, deoxycholate, docusate and tripolyphosphate). The partition coefficient and dissociation of the complexes in water of various pH were investigated. The complex-loaded nanoemulsions were characterized for droplet size, leakage of sCT from the droplets, and protection of sCT from enzymatic degradation. The results show that all the counter ions could form complexes with sCT with a complexation efficiency about 95% at pH 8.0. The complexes significantly increased the partition coefficient of sCT. The dissociation of the complexes in water was pH-dependent. At pH 6.8 and 7.4, the dissociation was negligible. At pH 1.0, the dissociation was 71%, 8%, 37% and 50% for sCT-polyphosphate, sCT-docusate, sCT-oleate and sCT-deoxycholate, respectively. The developed nanoemulsions had a size in the range of 27-62 nm. The leakage of sCT from the nanodroplets into the aqueous phase depended on the lipophilicity of the counter ions: 60%, 56%, and 24% leakage for sCT-docusate, sCT-oleate and sCT-deoxycholate, respectively. The nanoemulsion protected sCT from enzyme degradation when loaded inside the droplets, but not the leaked sCT.

Evaluation of self-emulsifying drug delivery systems for oral insulin delivery using an in vitro model simulating the intestinal proteolysis

The gentle preparation and the functionalization potential of self-emulsifying drug delivery systems (SEDDS) make them an interesting formulation strategy for oral administration of peptide and protein (p/p) drugs. A series of Kolliphor® RH40 (RH40) and Labrasol® (LAB)-based SEDDS containing either long-chain (LC) or medium-chain (MC) glycerides were formulated and characterized with regard to their rheological behavior, as well as the size distribution and zeta potential of the generated emulsions. Insulin, in order to be incorporated in SEDDS, was complexed with soybean phosphatidylcholine. The ability of different SEDDS to protect the incorporated insulin against enzymatic hydrolysis was evaluated by an in vitro model simulating the intestinal proteolysis. SEDDS were incubated in simulated intestinal fluids in the presence of α-Chymotrypsin (α-CT), and HPLC was used to quantify the remaining insulin. Principal component analysis (PCA) was applied to identify the relations between different excipients and properties of SEDDS that describe the SEDDS protective effect on insulin during in vitro proteolysis. The RH40-SEDDS behaved Newtonian in the presence of ethanol (EtOH) and non-Newtonian in the absence of EtOH, which generated emulsion with droplets between 30 to 300 nm. The LAB-SEDDS always behaved Newtonian and generated polydisperse emulsions with broad size distribution (190-4000 nm). During the in vitro proteolysis, insulin can be effectively protected against α-CT (> 60% remaining insulin after 60 min in vitro proteolysis). According to PCA analysis, insulin was better protected in MC-SEDDS compared to LC-SEDDS, and better in LAB-SEDDS compared to RH40-SEDDS. Monoacyl phosphatidylcholine and Capmul® MCM C8 were recognized as excipients favored for SEDDS protection on insulin. However, SEDDS viscosity and the addition of EtOH in SEDDS played insignificant roles on the remaining insulin after in vitro proteolysis. In summary, an in vitro proteolysis model with increased physiological relevance was applied to enable the optimal design of SEDDS for oral p/p drug delivery.

Hydrophobic H-bond pairing: A novel approach to improve membrane permeability

The aim of the present study was to develop hydrophobic H-bond pairs (HHPs) of leuprolide (LEU) with non-ionic surfactants to improve its membrane permeability. LEU was lipidized via hydrophobic H-bond pairing (HHP) with the sucrose esters (SEs) sucrose laurate HLB 15 (SLA-15), sucrose palmitate HLB 16 (SPA-16), sucrose stearate HLB 11 (SST-11) and sucrose stearate HLB 15 (SST-15). HHPs were evaluated regarding precipitation efficiency in water, zeta potential, log Pn-octanol/water and dissociation behavior at various pH over time. Cytotoxic potential of HHPs of LEU with SST-11 was investigated on Caco-2 cells. Subsequently, ex vivo permeation studies were carried out across freshly excised Sprague-Dawley rat intestinal mucosa. At a molar ratio of LEU to SEs of 1:≥1 a precipitation efficiency of above 50% was achieved. Zeta potential of complexes was neither influenced by the type nor the amount of added surfactants. Log Pn-octanol/water of LEU was up to 250-fold increased due to HHP utilizing SST-11. Dissociation studies showed that HHPs of LEU with SST-11 dissociate up to 20% in gastrointestinal (GI) pH conditions within 4 h. Moreover, HHPs of LEU with SST-11 exhibited no cytotoxicity. Ex vivo permeation studies revealed 2-fold improved membrane permeation of HHPs of LEU with SST-11 compared to free LEU. Findings of this study show that HHP can be considered as a promising strategy to improve membrane permeation.

Hydrophobic ion pairing: encapsulating small molecules, peptides, and proteins into nanocarriers

Hydrophobic ion pairing has emerged as a method to modulate the solubility of charged hydrophilic molecules ranging in class from small molecules to large enzymes. Charged hydrophilic molecules are ionically paired with oppositely-charged molecules that include hydrophobic moieties; the resulting uncharged complex is water-insoluble and will precipitate in aqueous media. Here we review one of the most prominent applications of hydrophobic ion pairing: efficient encapsulation of charged hydrophilic molecules into nano-scale delivery vehicles - nanoparticles or nanocarriers. Hydrophobic complexes are formed and then encapsulated using techniques developed for poorly-water-soluble therapeutics. With this approach, researchers have reported encapsulation efficiencies up to 100% and drug loadings up to 30%. This review covers the fundamentals of hydrophobic ion pairing, including nomenclature, drug eligibility for the technique, commonly-used counterions, and drug release of encapsulated ion paired complexes. We then focus on nanoformulation techniques used in concert with hydrophobic ion pairing and note strengths and weaknesses specific to each. The penultimate section bridges hydrophobic ion pairing with the related fields of polyelectrolyte coacervation and polyelectrolyte-surfactant complexation. We then discuss the state of the art and anticipated future challenges. The review ends with comprehensive tables of reported hydrophobic ion pairing and encapsulation from the literature.

Self-emulsifying drug delivery systems: In vivo evaluation of their potential for oral vaccination

Oral Immunization remains a challenge as antigens are rapidly metabolized in the gastrointestinal tract. In numerous previous studies, Self-emulsifying drug delivery systems (SEDDS) have demonstrated to be a promising tool for oral delivery of biologics. In this study, the potential of SEDDS as vehicle for oral vaccination has been evaluated. At this purpose, the model antigen Bovine serum albumin (BSA) has been incorporated in SEDDS after ion pairing. Squalane and monophosphoryl lipid A (MPLA) were chosen as adjuvants and dissolved in SEDDS containing BSA (SEDDS-BSA-squalane and SEDDS-BSA-MPLA). Formulations were administered orally to BALB/c mice. As control unformulated BSA was administrated orally (BSA-oral) and subcutaneously (BSA-sc). Systemic (anti BSA IgG titre) and mucosal (anti BSA IgA titre) immugenicity of BSA loaded in SEDDS and of unformulated BSA administered orally and subcutaneously was assessed and compared with each other. SEDDS-BSA-squalane and SEDDS-BSA-MPLA induced both higher anti BSA-IgG titre and anti BSA-IgA titre than orally administered unformulated BSA. BSA-sc induced the highest systemic immune response, however, the highest mucosal immune response was achieved via oral administration of SEDDS-BSA-squalane and SEDDS-BSA-MPLA. In general, SEDDS-BSA-MPLA showed the most promising systemic and mucosal immune response. According to these results, SEDDS seems to be a promising carrier for oral delivery of vaccines. STATEMENT OF SIGNIFICANCE: Oral vaccination is still a great challenge, as orally administered antigens are easily degraded in the gastrointestinal (GI) tract by peptidases and proteases. During the last years, self-emulsifying drug delivery systems (SEDDS) consisting of a mixture of oils and surfactants have been developed for the oral administration of hydrophilic macromolecular drugs. In this study, Bovine serum albumin (BSA) was chosen as model antigen and incorporated into self-emulsifying drug delivery systems (SEDDS) after hydrophobic ion pairing. Lipid A from Salmonella Minnesota R595 (MPLA) and squalane were chosen as adjuvants. SEDDS-BSA-MPLA and SEDDS-BSA-squalane were administered orally to mice. SEDDS-BSA-MPLA induced the strongest systemic (anti BSA-IgG titre) and mucosal (anti BSA-IgA titre) immune response. Based on these results, SEDDS are a promising alternative carrier for oral vaccine delivery.

Imine bond formation: A novel concept to incorporate peptide drugs in self-emulsifying drug delivery systems (SEDDS)

HYPOTHESIS

Because of its hydrophilic character the peptide drug Polymyxin B (PMB) cannot be incorporated in lipophilic nanocarrier systems such as self-emulsifying drug delivery systems (SEDDS) for oral administration. Due to the formation of imine conjugates between the primary amino groups of PMB and the carbonyl group of cinnamaldehyde, however, drug lipophilicity might be sufficiently raised for incorporation in SEDDS.

METHODS

Imine bonds were formed between the primary amino groups of PMB and the carbonyl group of cinnamaldehyde. PMB-cinnamaldehyde conjugate was characterized regarding degree of substitution, log P and release of PMB due to interaction with bovine serum albumin (BSA), SEDDS loading and cell viability.

RESULTS

87.1% of primary amines formed imines with cinnamaldehyde. Log P was increased 69.183 - folds. BSA triggered release of PMB was 45.2%, 64.9% and 80.6% within 16 h. Log D_{SEDDS/Release medium} of PMB-cinnamaldehyde conjugate was 3.4.

CONCLUSION

According to these findings, the concept of imine bond formation with cinnamaldehyde can be considered as a novel concept for increasing lipophilicity of the hydrophilic antibiotic peptide PMB.

In-vitro evaluation of solid lipid nanoparticles: Ability to encapsulate, release and ensure effective protection of peptides in the gastrointestinal tract

Peptides are rarely orally administrated due to rapid degradation in the gastrointestinal tract and low absorption at the epithelial border. The objective of this study was to encapsulate a model water-soluble peptide in biodegradable and biocompatible solid lipid-based nanoparticles, i.e. Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) in order to protect it from metabolic degradation. Leuprolide (LEU) and a LEU-docusate Hydrophobic Ion Pair (HIP) were encapsulated in SLN and NLC by High Pressure Homogenization. The particles were characterized regarding their Encapsulation Efficiency (EE), size, morphology, peptide release in FaSSIF-V2, and protective effect towards proteases. Nanoparticles of 120 nm with platelet structures were obtained. Formation of HIP led to a significant increase in LEU EE. Particle size was moderately affected by the presence of simulated fluids. Nonetheless, an important burst release was observed upon dispersion in FaSSIF-V2. NLC were able to improve LEU-HIP resistance to enzymatic degradation induced by trypsin but presented no advantages in presence of α-chymotrypsin. SLN provided no protection regarding both proteases. Despite an increased amount of encapsulated peptide in solid lipid-based nanoparticles following HIP formation, the important specific surface area linked to their platelet structures resulted in an important peptide release upon dispersion in FaSSIF-V2 and limited protection towards enzymatic degradation.

Self-emulsifying drug delivery systems: Impact of stability of hydrophobic ion pairs on drug release

The aim of this study was to evaluate the impact of stability of hydrophobic ion pairs (HIPs) in gastrointestinal (GI) fluids on their release from self-emulsifying drug delivery systems (SEDDS). HIPs of leuprolide (LEU), insulin (INS) and bovine serum albumin (BSA) were formed using various mono- and di-carboxylate surfactants i.e. sodium deoxycholate (SDC), sodium dodecanoate (SDD), sodium stearoyl glutamate (SSG) and pamoic acid di-sodium salt (PAM). HIPs were evaluated regarding precipitation efficiency, log Pn-butanol/water and dissociation behavior at various pH and ionic strength. Solubility studies of these HIPs were accomplished to identify suitable solvents for the formulation of SEDDS. Subsequently, HIPs were incorporated into SEDDS followed by characterization regarding zeta potential, stability and log DSEDDS/release medium. Independent from the type of (poly)peptides, PAM showed most efficient HIP properties among tested surfactants. The highest encapsulation efficiency with PAM was achieved at molar ratios of 1:1 for LEU, 1:3 for INS and 1:50 for BSA and log Pn-butanol/water of HIPs were increased at least 2.5 units. Dissociation studies showed that LEU-PAM, INS-PAM, BSA-PAM complexes were dissociated within 6 h up to 25%, 60% and 85% in GI fluids, respectively. These HIPs were successfully incorporated into SEDDS exhibiting negative zeta potential and high stability for 4 h. Log DSEDDS/release medium of LEU-PAM, INS-PAM, BSA-PAM complexes were 2.4 ± 0.7, 2.1 ± 0.62 and 1.6 ± 0.45, respectively. Findings of this study showed that stability of HIPs has great impact on log DSEDDS/release medium and consequently on their release from SEDDS.

SEDDS: A game changing approach for the oral administration of hydrophilic macromolecular drugs

Since the development of self-emulsifying drug delivery systems (SEDDS) in 1980's, they attract the attention of researchers in order to confront the challenge of poor water-solubility of orally given drugs. Within recent years, SEDDS were also discovered for oral administration of hydrophilic macromolecular drugs such as peptides, proteins, polysaccharides and pDNA. Due to hydrophobic ion pairing (HIP) with oppositely charged lipophilic auxiliary agents the resulting complexes can be incorporated in the lipophilic phase of SEDDS. Depending on the solubility of the complex in the SEDDS pre-concentrate and in the release medium drug release can be adjusted on purpose by choosing more or less lipophilic auxiliary agents in appropriate quantities for HIP. Within the oily droplets formed in the GI-tract drugs are protected towards degradation by proteases and nucleases and thiol-disulfide exchange reactions with dietary proteins. The oily droplets can be made mucoadhesive or highly mucus permeating depending on their target site. Furthermore, even their cellular uptake properties can be tuned by adjusting their zeta potential or decorating them with cell penetrating peptides. The potential of SEDDS for oral administration of hydrophilic macromolecular drugs could meanwhile be demonstrated via various in vivo studies showing a bioavailability at least in the single digit percentage range. Owing to these properties advanced SEDDS turned out to be a game changing approach for the oral administration of hydrophilic macromolecular drugs.

Self-emulsifying drug delivery system: Mucus permeation and innovative quantification technologies

Mucus is a dynamic barrier which covers and protects the underlying mucosal epithelial membrane against bacteria and foreign particles. This protection mechanism extends to include therapeutic macromolecules and nanoparticles (NPs) through trapping of these particles. Mucus is not only a physical barrier that limiting particles movements based on their sizes but it selectively binds with particles through both hydrophilic and lipophilic interactions. Therefore, nano-carriers for mucosal delivery should be designed to eliminate entrapment by the mucus barrier. For this reason, different strategies have been approached for both solid nano-carriers and liquid core nano-carriers to synthesise muco-diffusive nano-carrier. Among these nano-strategies, Self-Emulsifying Drug Delivery System (SEDDS) was recognised as very promising nano-carrier for mucus delivery. The system was introduced to enhance the dissolution and bioavailability of orally administered insoluble drugs. SEDDS has shown high stability against intestinal enzymatic activity and more importantly, relatively rapid permeation characteristics across mucus barrier. The high diffusivity of SEDDS has been tested using various in vitro measurement techniques including both bulk and individual measurement of droplets diffusion within mucus. The selection and processing of an optimum in vitro technique is of great importance to avoid misinterpretation of the diffusivity of SEDDS through mucus barrier. In conclusion, SEDDS is a system with high capacity to diffuse through intestinal mucus even though this system has not been studied to the same extent as solid nano-carriers.

Application of Permeation Enhancers in Oral Delivery of Macromolecules: An Update

The application of permeation enhancers (PEs) to improve transport of poorly absorbed active pharmaceutical ingredients across the intestinal epithelium is a widely tested approach. Several hundred compounds have been shown to alter the epithelial barrier, and although the research emphasis has broadened to encompass a role for nanoparticle approaches, PEs represent a key constituent of conventional oral formulations that have progressed to clinical testing. In this review, we highlight promising PEs in early development, summarize the current state of the art, and highlight challenges to the translation of PE-based delivery systems into safe and effective oral dosage forms for patients.

In vitro and in vivo evaluation of desmopressin-loaded poly(D,L-lactic-co-glycolic acid) nanoparticles for its potential use in cancer treatment

AIM

To develop and characterize the antitumor activity of poly(D,L-lactic-co-glycolic acid) nanoparticles loaded with hemostatic and anticancer drug desmopressin (dDAVP).

MATERIALS & METHODS

After full physicochemical characterization, anticancer activity of dDAVP-loaded poly(D,L-lactic-co-glycolic acid) nanoparticles (NPdDAVP) was evaluated in vitro and in vivo on a highly aggressive breast cancer model.

RESULTS

After efficiently loading desmopressin in poly(D,L-lactic-co-glycolic acid) matrix, NPdDAVP exhibited suitable physicochemical characteristics for biomedical applications. NPdDAVP displayed a potent cytostatic effect in vitro, inhibiting tumor cell proliferation and colony forming ability. Moreover, intravenous treatment using nanoparticulated-dDAVP inhibited tumor progression and prolonged survival in animals bearing rapidly-growing mammary tumors.

CONCLUSION

Within the framework of promising dDAVP repurposing studies, these findings support further preclinical development of the NPdDAVP for the management of highly aggressive cancer.

Advanced formulations for intranasal delivery of biologics

INTRODUCTION

The global biologics market has been ever increasing over the last decades and is predicted to top Euro 350 by 2020. Facing this scenario, the parenteral route of biologics administration as hitherto standard route is inconvenient for the future. Among the alternatives, the intranasal delivery of therapeutic biologicals seems to be most promising but researchers are still facing challenges as indicated by the scarce number of successfully marketed peptide drugs.

AREAS COVERED

This review article is a compilation of current research focusing on achievements in the field of auxiliary agents for biologics delivery. First, the key benefits of the nose as most promising alternative route of drug administration are highlighted. Then, the potential of the different auxiliary agents in preclinical research is in detail discussed. Moreover, the most used permeation enhancing agents, mucolytic agents, mucoadhesive agents, in situ gelling agents and enzyme inhibiting agents in the formulation of nasal drug delivery systems are described. Thus, the overall purpose of this review is to highlight recent achievements in nasal delivery of biologics and to encourage researchers to work in the direction of needle-free nasal administration of biologics.

EXPERT OPINION

The nasal epithelium is a promising route for biologics administration, which is reflected in a number of well-established products on the market treating chronic diseases as well as a large number of clinical trials currently in progress. The nasal route of drug administration might be a chance to improve therapy of biologics however break-through advances, especially for very complex molecules, such as antibodies, are still needed.

Amikacin-containing self-emulsifying delivery systems via pulmonary administration for treatment of bacterial infections of cystic fibrosis patients

Aim: The aim of the study was to develop self-emulsifying delivery systems (SEDDS) exhibiting improved permeation rate for pulmonary delivery of amikacin for treatment of cystic fibrosis (CF) patients. Materials & methods: Solubility of amikacin in lipids was improved by hydrophobic ion pairing with sodium myristyl sulfate. The complex was loaded into SEDDS. Drug-release studies were performed and the permeation properties of SEDDS through human CF mucus were examined. Results: A total of 10% complex could be loaded into SEDDS. SEDDS exhibited sustained release. Up to twofold more amounts of amikacin permeated through the CF mucus compared with reference. Conclusion: The developed SEDDS with amikacin may be a promising tool for the treatment of certain bacterial infections of CF patients.