Preparation and characterization of microemulsion formulations of nicotinic acid and its prodrugs for transdermal delivery

Curcumin-loaded microemulsion: formulation, characterization, and in vitro skin penetration

OBJECTIVE

Formulation of curcumin in a microemulsion with a high loading capacity and that favors its penetration into the skin.

SIGNIFICANCE

Take advantage of the properties of microemulsions to promote the penetration of curcumin into the skin, with the aim of enhancing its therapeutic effects.

METHODS

Curcumin was formulated in microemulsions based on oleic acid (oil phase), Tween® 80 (surfactant), and Transcutol^® HP (cosurfactant). The microemulsion formation area was mapped by constructing pseudo-ternary diagrams for surfactant:co-surfactant ratios 1:1, 1:2, and 2:1. Microemulsions were characterized through measurements of specific weight, refractive index, conductivity, viscosity, droplet size, and in vitro skin permeation studies.

RESULTS

Nine microemulsions were prepared and characterized, showing clear, stable formulations with globule size dependent on the proportion of the components. The microemulsion with the highest loading capacity (60 mg/mL), based on Tween^® 80, Transcutol^® HP, oleic acid, and water (40:40:10:10) was able to penetrate the viable epidermis, finding a total amount of curcumin in the receptor medium at 24 h of 10.17 ± 9.7 µg/cm². The distribution of curcumin in the skin, visualized by confocal laser scanning microscopy, showed that the maximum amount was located between 20 and 30 µm.

CONCLUSION

The inclusion of curcumin in a microemulsion allows its passage into and through the skin. The localization of curcumin, especially in the viable epidermis, would be important for those cases where local conditions are sought to be treated.

Hydrolysis kinetics of the prodrug myristyl nicotinate

Myristyl nicotinate is a prodrug of nicotinic acid. In this research, the kinetics of hydrolysis for myristyl nicotinate was studied in an aqueous phosphate buffer solution within a 5-10 pH range and constant ionic strength at a high temperature which was 80 °C to perform accelerated hydrolysis experiments. The effect of temperature, ionic strength, buffer concentrations, and buffer type was studied. The degradation was monitored using a validated HPLC method. The kinetics of hydrolysis of myristyl nicotinate was also studied in skin and liver homogenates. The hydrolysis was found to follow pseudo-first-order kinetics. The rate constant was calculated from the slope of a linear plot of Ln transformation (Ln) of the remaining parent prodrug concentration versus time. The hydrolysis was found pH- dependent, and a pH rate profile was constructed. Moreover, the hydrolysis rate of the prodrug was found to be buffer species dependent. Carbonate buffer has the most catalytic effect over borate and phosphate buffers. The effect of temperature on the kinetics of hydrolysis of myristyl nicotinate in phosphate buffer at pH 9 at 343, 348, 353, and 358°K was studied. The hydrolysis was found to follow the Arrhenius equation. From the Arrhenius plot, the half-life at 25 °C, and the activation energy were calculated and were found to be 466.5 days and 24.57 kcal mol^-1, respectively. The hydrolysis of the prodrug was faster in liver and skin homogenates than those in aqueous buffer solutions. The pseudo-first-order rate constants were found to be 0.012, 0.028 min^-1 for myristyl nicotinate in the liver, and skin homogenates, respectively.

Preparation and Characterization of Lidocaine-Loaded, Microemulsion-Based Topical Gels

Microemulsion-based gels (MBGs) were prepared for transdermal delivery of lidocaine and evaluated for their potential for local anesthesia. Lidocaine solubility was measured in various oils, and phase diagrams were constructed to map the concentration range of oil, surfactant, cosurfactant, and water for oil-in-water (o/w) microemulsion (ME) domains, employing the water titration method at different surfactant/cosurfactant weight ratios. Refractive index, electrical conductivity, droplet size, zeta potential, pH, viscosity, and stability of fluid o/w MEs were evaluated. Carbomer^® 940 was incorporated into the fluid drug-loaded MEs as a gelling agent. Microemulsion-based gels were characterized for spreadability, pH, viscosity, and in-vitro drug release measurements, and based on the results obtained, the best MBGs were selected and subsequently subjected to ex-vivo rat skin permeation anesthetic effect and irritation studies. Data indicated the formation of nano-sized droplets of MEs ranging from 20 - 52 nm with a polydispersity of less than 0.5. In-vitro release and ex-vivo permeation studies on MBGs showed significantly higher drug release and permeation in comparison to the marketed topical gel. Developed MBG formulations demonstrated greater potential for transdermal delivery of lidocaine and advantage over the commercially available gel product, and therefore, they may be considered as potential vehicles for the topical delivery of lidocaine.

Microemulsion Delivery System Improves Cellular Uptake of Genipin and Its Protective Effect against Aβ1-42-Induced PC12 Cell Cytotoxicity

Genipin has attracted much attention for its hepatoprotective, anti-inflammatory, and neuroprotection activities. However, poor water solubility and active chemical properties limit its application in food and pharmaceutical industries. This article aimed to develop a lipid-based microemulsion delivery system to improve the stability and bioavailability of genipin. The excipients for a genipin microemulsion (GME) preparation were screened and a pseudo-ternary phase diagram was established. The droplet size (DS), zeta potential (ZP), polydispersity index (PDI), physical and simulated gastrointestinal digestion stability, and in vitro drug release properties were characterized. Finally, the effect of the microemulsion on its cellular uptake by Caco-2 cells and the protective effect on PC12 cells were investigated. The prepared GME had a transparent appearance with a DS of 16.17 ± 0.27 nm, ZP of −8.11 ± 0.77 mV, and PDI of 0.183 ± 0.013. It exhibited good temperature, pH, ionic strength, and simulated gastrointestinal digestion stability. The in vitro release and cellular uptake data showed that the GME had a lower release rate and better bioavailability compared with that of free genipin. Interestingly, the GME showed a significantly better protective effect against amyloid-β (Aβ1-42)-induced PC12 cell cytotoxicity than that of the unencapsulated genipin. These findings suggest that the lipid-based microemulsion delivery system could serve as a promising approach to improve the application of genipin.

Repurposing ibuprofen-loaded microemulsion for the management of Alzheimer's disease: evidence of potential intranasal brain targeting

Studies have shown the use of non-steroidal anti-inflammatory drugs, such as ibuprofen could reduce the risk of Alzheimer's disease. The drug-repurposing strategy offers a bright opportunity for these patients. Intranasal administration through the olfactory pathway provides noninvasive and direct drug delivery to the target brain. A novel ibuprofen microemulsion was prepared, characterized and assessed the brain uptake in rats. The solubility of ibuprofen in various oils, surfactants, co-surfactants, and different ratios of surfactant/co-surfactant mixtures was screened and the phase diagrams were constructed. The colloidal particle size was 166.3 ± 2.55 nm and the zeta potential was -22.7 mV. Conductivity and dilution test identified an O/W type microemulsion with pH 4.09 ± 0.08. The rheological study showed a Newtonian flow behavior with cP 10.633 ± 0.603 (mPa⋅s). A steady drug release and linear permeation profiles were observed and showed a 90% permeation rate from the released drug. Ibuprofen microemulsion showed excellent stability in 3-months accelerated storage conditions, heating-cooling and freeze-thaw cycles, accelerated centrifugation, and 6- and 12-months long-term storage conditions. In vivo studies in rats further demonstrated a 4-fold higher brain uptake of ibuprofen from the microemulsion compared to the reference solution and nearly 4-fold and 10-fold higher compared to the intravenous and oral administrations. This study provides an exciting repurposing strategy and new administration route for the treatment of Alzheimer's disease.

Effects of formulation design on niacin therapeutics: mechanism of action, metabolism, and drug delivery

Niacin is a highly effective, lipid regulating drug associated with a number of metabolically induced side effects such as prostaglandin (PG) mediated flushing and hepatic toxicity. In an attempt to reduce the development of these adverse effects, scientists have investigated differing methods of niacin delivery designed to control drug release and alter metabolism. However, despite successful formulation of various orally based capsule and tablet delivery systems, patient adherence to niacin therapy is still compromised by adverse events such as PG-induced flushing. While the primary advantage of orally dosed formulations is ease of use, alternative delivery options such as transdermal delivery or polymeric micro/nanoparticle encapsulation for oral administration have shown promise in niacin reformulation. However, the effectiveness of these alternative delivery options in reducing inimical effects of niacin and maintaining drug efficacy is still largely unknown and requires more in-depth investigation. In this paper, we present an overview of niacin applications, its metabolic pathways, and current drug delivery formulations. Focus is placed on oral immediate, sustained, and extended release niacin delivery as well as combined statin and/or prostaglandin antagonist niacin formulation. We also examine and discuss current findings involving transdermal niacin formulations and polymeric micro/nanoparticle encapsulated niacin delivery.

Optimized Preparation of Capsaicin-Loaded Nanoparticles Gel by Box-Behnken Design

A three-factor three-level Box-Behnken design(BBD) was employed to optimize capsaicin-loaded nanoparticles(Cap-NPs), and its properties in vitro and in vivo were evaluated. Particle size, morphological characteristics, entrapment efficiency of Cap-NPs were investigated respectively by Zetasizer, H7000 TEM and HPLC. Release, skin permeation and skin irritation test were investigated on mouse and rabbits. The predicted values of Cap-NPs were 94.50±6.33% for entrapment efficiency(EE) and 170.30±7.81 nm for particle mean diameter(PMD) under optimal conditions which were 346.33 bar (homogenization pressure, X1), 4.67 min(homogenization time, X2), and 15421.42 rpm (shear rate, X3). The in vitro permeation study showed that capsaicin permeability in NPs-gel was a 2.80-fold greater flux values than conventional ointment after 24 h. Cap-NPs-gel produce no observable skin irritation in rabbits within 72h. The optimized Cap-NPs-gel would be a good candidate for transdermal delivery.

An in vitro and in vivo comparison of solid and liquid-oil cores in transdermal aconitine nanocarriers

This study compared transdermal aconitine delivery using solid lipid nanoparticles (SLN) and microemulsion (ME) vehicles. Aconitine-loaded SLN and ME were formulated with the same surfactant, cosurfactant, and water content, with an equal amount of oil matrix (ATO 888 for SLN and ethyl oleate for ME). These nanosized formulations (70-90 nm) showed suitable pH values and satisfactory skin tissue biocompatibility. SLN contained a higher concentration of smaller nanoparticles, compared with that in ME. Neither of the nanocarriers penetrated across excised skin in their intact form. In vitro transdermal delivery studies found that transdermal aconitine flux was lower from SLN than from ME (p < 0.05), but skin aconitine deposition was higher using SLN (p < 0.05). Fluorescence-activated cell sorting indicated that in vitro uptake of fluorescently labeled SLN by human immortalized keratinocyte (HaCaT) cells was greater than that of ME, indicating that a transcellular pathway may contribute to cutaneous drug absorption more effectively from SLN. In vivo studies found that these formulations could loosen stratum corneum layers and increase skin surface crannies, which may also enhance transdermal aconitine delivery. SLN produced a more sustained aconitine release, indicating that compared with ME, this transdermal delivery vehicle may reduce the toxicity of this drug.

Preparation and evaluation of microemulsion-based transdermal delivery of total flavone of rhizoma arisaematis

The aims of the present study were to investigate the skin permeation and cellular uptake of a microemulsion (ME) containing total flavone of rhizoma arisaematis (TFRA), and to evaluate its effects on skin structure. Pseudo-ternary phase diagrams were constructed to evaluate ME regions with various surfactants and cosurfactants. Eight formulations of oil-in-water MEs were selected as vehicles, and in vitro skin-permeation experiments were performed to optimize the ME formulation and to evaluate its permeability, in comparison to that of an aqueous suspension. Laser scanning confocal microscopy and fluorescent-activated cell sorting were used to explore the cellular uptake of rhodamine 110-labeled ME in human epidermal keratinocytes (HaCaT) and human embryonic skin fibroblasts (CCC-ESF-1). The structure of stratum corneum treated with ME was observed using a scanning electron microscope. Furthermore, skin irritation was tested to evaluate the safety of ME. ME formulated with 4% ethyl oleate (weight/weight), 18% Cremophor EL^® (weight/weight), and 18% Transcutol^® P, with 1% Azone to enhance permeation, showed good skin permeability. ME-associated transdermal fluxes of schaftoside and isoschaftoside, two major effective constituents of TFRA, were 3.72-fold and 5.92-fold higher, respectively, than those achieved using aqueous suspensions. In contrast, in vitro studies revealed that uptake by HaCaT and CCC-ESF-1 cells was lower with ME than with an aqueous suspension. Stratum corneum loosening and shedding was observed in nude mouse skin treated with ME, although ME produced no observable skin irritation in rabbits. These findings indicated that ME enhanced transdermal TFRA delivery effectively and showed good biocompatibility with skin tissue.

Overcoming the cutaneous barrier with microemulsions

Microemulsions are fluid and isotropic formulations that have been widely studied as delivery systems for a variety of routes, including the skin. In spite of what the name suggests, microemulsions are nanocarriers, and their use as topical delivery systems derives from their multiple advantages compared to other dermatological formulations, such as ease of preparation, thermodynamic stability and penetration-enhancing properties. Composition, charge and internal structure have been reported as determinant factors for the modulation of drug release and cutaneous and transdermal transport. This manuscript aims at reviewing how these and other characteristics affect delivery and make microemulsions appealing for topical and transdermal administration, as well as how they can be modulated during the formulation design to improve the potential and efficacy of the final system.