A dry powder formulation from silk fibroin microspheres as a topical auto-gelling device

Growth Factors Delivery System for Skin Regeneration: An Advanced Wound Dressing

Standard treatments of chronic skin ulcers based on the direct application of dressings still present several limits with regard to a complete tissue regeneration. Innovative strategies in tissue engineering offer materials that can tune cell behavior and promote growth tissue favoring cell recruitment in the early stages of wound healing. A combination of Alginate (Alg), Sericin (SS) with Platelet Lysate (PL), as a freeze-dried sponge, is proposed to generate a bioactive wound dressing to care skin lesions. Biomembranes at different composition were tested for the release of platelet growth factors, cytotoxicity, protective effects against oxidative stress and cell proliferation induction. The highest level of the growth factors release occurred within 48 h, an optimized time to burst a healing process in vivo; the presence of SS differently modulated the release of the factors by interaction with the proteins composing the biomembranes. Any cytotoxicity was registered, whereas a capability to protect cells against oxidative stress and induce proliferation was observed when PL was included in the biomembrane. In a mouse skin lesion model, the biomembranes with PL promoted the healing process, inducing an accelerated and more pronounced burst of inflammation, formation of granulation tissue and new collagen deposition, leading to a more rapid skin regeneration.

Paclitaxel-Loaded Silk Fibroin Nanoparticles: Method Validation by UHPLC-MS/MS to Assess an Exogenous Approach to Load Cytotoxic Drugs

The aim of this work was to load an anticancer drug, paclitaxel (PTX), on Silk Fibroin Nanoparticles (SFNs) by using an exogenous approach. SFNs were produced, freeze-dried and then loaded with PTX. An exogenous method allowed us to reduce both drug loss and environmental impact. In order to quantify PTX loaded in SFNs, a simple and reliable method using reversed phase liquid chromatography coupled to tandem mass spectrometry (rp-UHPLC-MS/MS) was developed. This methodology was validated by the determination of spiked QC samples in three consecutive days. Good accuracy and precision of the method were obtained, while the intra-day and inter-day precisions were less than 10.3%. For PTX, the limit of quantitation (LOQ) was 5.0 ng/mL. Recovery from the matrix (SFNs-PTX pellets) was calculated (81.2% at LOQ value) as PTX was entrapped in a new matrix like the polymer silk fibroin-based. This method was successfully applied to determine the encapsulation efficiency (1.00 ± 0.19%) and the nanoparticle loading (0.12 ± 0.02% w/w). The in vitro anticancer activity of SFNs-PTX was tested against CFPAC-1 cancer cells; results demonstrated a very high cytotoxic activity of SFNs-PTX, with a dose dependent inhibition of CFPAC-1 proliferation, confirmed by the IC50 value of 3450 ± 750 ng/mL.

Silk/Fibroin Microcarriers for Mesenchymal Stem Cell Delivery: Optimization of Cell Seeding by the Design of Experiment

In this methodological paper, lyophilized fibroin-coated alginate microcarriers (LFAMs) proposed as mesenchymal stem cells (MSCs) delivery systems and optimal MSCs seeding conditions for cell adhesion rate and cell arrangement, was defined by a Design of Experiment (DoE) approach. Cells were co-incubated with microcarriers in a bioreactor for different time intervals and conditions: variable stirring speed, dynamic culture intermittent or continuous, and different volumes of cells-LFAMs loaded in the bioreactor. Intermittent dynamic culture resulted as the most determinant parameter; the volume of LFAMs/cells suspension and the speed used for the dynamic culture contributed as well, whereas time was a less influencing parameter. The optimized seeding conditions were: 98 min of incubation time, 12.3 RPM of speed, and 401.5 µL volume of cells-LFAMs suspension cultured with the intermittent dynamic condition. This DoE predicted protocol was then validated on both human Adipose-derived Stem Cells (hASCs) and human Bone Marrow Stem Cells (hBMSCs), revealing a good cell adhesion rate on the surface of the carriers. In conclusion, microcarriers can be used as cell delivery systems at the target site (by injection or arthroscopic technique), to maintain MSCs and their activity at the injured site for regenerative medicine.

Polydopamine-Assisted Silver Nanoparticle Self-Assembly on Sericin/Agar Film for Potential Wound Dressing Application

Silver nanoparticles (AgNPs) are extensively applied for their broad-spectrum and excellent antibacterial ability in recent years. Polydopamine (PDA) has great advantages for synthesizing large amounts of AgNPs, as it has multiple sites for silver ion binding and phenolic hydroxyl structure to reduce silver ions to AgNPs. Here, we mixed sericin and agar solution and dried at 65 °C to prepare a sericin (SS)/Agar composite film, and then coated polydopamine (PDA) on the surface of SS/Agar film by soaking SS/Agar film into polydopamine solution, subsequently synthesizing high-density AgNPs with the assistance of PDA to yield antibacterial AgNPs-PDA- SS/Agar film. Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) spectra indicated the successful synthesis of high-density AgNPs on the surface of PDA-SS/Agar film. PDA coating and AgNPs modification did not affect the structure of sericin and agar. Furthermore, water contact angle, water absorption and mechanical property analysis showed that AgNPs-PDA-SS/Agar film had excellent hydrophilicity and proper mechanical properties. Inhibition zone and growth curve assays suggested the prepared film had excellent and long-lasting antibacterial ability. In addition, it had excellent cytocompatibility on the fibroblast NIH/3T3 cells. The film shows great potential as a novel kind of wound dressing.

Fabrication of Oxygen Releasing Scaffold by Embedding H2O2-PLGA Microspheres into Alginate-Based Hydrogel Sponge and Its Application for Wound Healing

In the regeneration process for new tissues, oxygen promotes re-epithelialization and healing of infected wounds, increases keratinocyte differentiation, proliferation and migration of fibroblast, and induces angiogenesis, collagen synthesis and wound contraction. Therefore, provision of oxygen to cells and tissues at an optimal level is critical for effective tissue regeneration and wound healing. In this study, we developed sustained oxygen-releasing polymeric microspheres and fabricated a sponge type dressing by embedding the microspheres into alginate-based hydrogel that can supply oxygen to wounds. We further investigated the applicability of the microspheres and hydrogel sponge to wound healing in vitro and in vivo. Oxygen-releasing microspheres (ORM) were made by incorporating hydrogen peroxide (H2O2) into poly(lactic-co-glycolic acid) (PLGA) using double emulsion method. H2O2-PLGA microspheres were embedded into alginate-based hydrogel to form a porous oxygen-releasing hydrogel sponge (ORHS). Biocompatibility was performed using cell counting kit-8. The oxygen release kinetic study was performed using a hydrogen peroxide assay kit and oxygen meter. The wound healing potential of ORHS was evaluated using the wound scratch model. In vivo studies were carried out to investigate the safety and efficacy of the ORHS for wound healing. Experimental results confirmed that oxygen released from ORMand ORHS induced neovascularization and promoted cell proliferation thereby facilitating effective wound healing. It is suggested that the ORM can be used for supplying oxygen to where cells and tissues are deprived of necessary oxygen, and ORHS is an intelligent scaffold to effectively heal wound by enhanced angiogenesis by oxygen. Conclusively, oxygen releasing polymeric microspheres and hydrogel scaffolds have potential for a variety of tissue engineering applications, where require oxygen.

Fabrication of Innovative Silk/Alginate Microcarriers for Mesenchymal Stem Cell Delivery and Tissue Regeneration

The aim of this study was to exploit silk fibroin’s properties to develop innovative composite microcarriers for mesenchymal stem cell (MSCs) adhesion and proliferation. Alginate microcarriers were prepared, added to silk fibroin solution, and then treated with ethanol to induce silk conformational transition. Microcarriers were characterized for size distribution, coating stability and homogeneity. Finally, in vitro cytocompatibility and suitability as delivery systems for MSCs were investigated. Results indicated that our manufacturing process is consistent and reproducible: silk/alginate microcarriers were stable, with spherical geometry, about 400 μm in average diameter, and fibroin homogeneously coated the surface. MSCs were able to adhere rapidly onto the microcarrier surface and to cover the surface of the microcarrier within three days of culture; moreover, on this innovative 3D culture system, stem cells preserved their metabolic activity and their multi-lineage differentiation potential. In conclusion, silk/alginate microcarriers represent a suitable support for MSCs culture and expansion. Since it is able to preserve MSCs multipotency, the developed 3D system can be intended for cell delivery, for advanced therapy and regenerative medicine applications.

In Vitro Effectiveness of Microspheres Based on Silk Sericin and Chlorella vulgaris or Arthrospira platensis for Wound Healing Applications

Some natural compounds have recently been widely employed in wound healing applications due to their biological properties. One such compound is sericin, which is produced by Bombix mori, while active polyphenols, polysaccharides and proteins are synthetized by Chlorella vulgaris and Arthrospira platensis microalgae. Our hypothesis was that sericin, as an optimal bioactive polymeric carrier for microencapsulation process, could also improve the regenerative effect of the microalgae. A solvent-free extraction method and spray drying technique were combined to obtain five formulations, based on algal extracts (C. vulgaris and A. platensis, Chl and Art, respectively) or silk sericin (Ser) or their mixtures (Chl-Ser and Art-Ser). The spray drying was a suitable method to produce microspheres with similar dimensions, characterized by collapsed morphology with a rough surface. Art and Art-Ser showed higher antioxidant properties than other formulations. All microspheres resulted in cytocompatibility on fibroblasts until 1.25 mg/mL and promoted cell migration and the complete wound closure; this positive effect was further highlighted after treatment with Art and Art-Ser. To our surprize the combination of sericin to Art did not improve the microalgae extract efficacy, at least in our experimental conditions.

Local biological effects of adipose stromal vascular fraction delivery systems after subcutaneous implantation in a murine model

The aim of this study was to test alginate beads and silk fibroin non-woven mats as stromal vascular fraction delivery systems to support cell implantation for tissue repair and regeneration, through trophic and immunomodulant paracrine signaling. Furthermore, in vivo scaffold biocompatibility was histologically analyzed in a murine model at different time endpoints, with particular focus on construct-induced vascularization and neoangiogenesis. The fibroin mat induced a typical foreign body reaction, recruiting macrophages and giant cells and concurrently promoted neovascularization of the implanted construct. Conversely, alginate beads triggered a more circumscribed, chronic inflammatory reaction, which decreased over time. The combined in vivo implantation of alginate beads and fibroin mat with stromal vascular fraction promoted vascularization and integration of scaffolds into the surrounding subcutaneous environment. The new blood vessel ingrowth should, hopefully, support engineered cell viability and functionality, as well as the transport of soluble bioactive molecules. Due to their neovascularization properties, stromal vascular fraction administration, using alginate or fibroin scaffolds, is a new, promising, cost-effective tissue engineering approach.

Preparation of silk fibroin carriers for controlled release

Silk fibroin provides a new option for controlled release systems as a result of its excellent biodegradability, biocompatibility, and mechanical properties. As the core material, silk fibroin can be designed and widely used in drug/gene delivery, regenerative medicine, and other biomedical fields. This review focuses on the preparation methods, loading molecules, and applications of silk fibroin-based controlled release systems including microspheres, microcapsules, films, microparticles, microneedles, liposomes, and hydrogels. These systems provide numerous advantages such as high encapsulation efficiency, avoiding loss of bioactivity and maintaining desirable range without peaks and valleys in comparison to the traditional administration approaches. Microsc. Res. Tech. 80:312-320, 2017. © 2015 Wiley Periodicals, Inc.