Controlled release polymeric ocular delivery of acyclovir

Physical and mechanical properties of ocular thin films: a systematic review and meta-analysis

The ocular thin film presents a potential solution for addressing challenges to ocular drug delivery. In this review, we summarise the findings of a comprehensive review analysing 336 formulations from 68 studies. We investigated the physical and mechanical properties of ocular thin films, categorised into natural polymer-based, synthetic polymer-based, and combined polymer films. The results showed that the type of polymers used impacted mucoadhesion force, moisture absorption:moisture loss ratio, pH, swelling index, and elongation percentage. Significant relationships were found between these properties within each subgroup. The results also highlighted the influence of plasticisers on elongation percentage, mucoadhesion force, swelling index, and moisture absorption:moisture loss ratio. These findings have implications for designing and optimising ocular drug formulations and selecting appropriate plasticisers to achieve formulations with the desired properties.

Advances in Antiviral Delivery Systems and Chitosan-Based Polymeric and Nanoparticulate Antivirals and Antiviral Carriers

Current antiviral therapy research is focused on developing dosage forms that enable highly effective drug delivery, providing a selective effect in the organism, lower risk of adverse effects, a lower dose of active pharmaceutical ingredients, and minimal toxicity. In this article, antiviral drugs and the mechanisms of their action are summarized at the beginning as a prerequisite background to develop relevant drug delivery/carrier systems for them, classified and briefly discussed subsequently. Many of the recent studies aim at different types of synthetic, semisynthetic, and natural polymers serving as a favorable matrix for the antiviral drug carrier. Besides a wider view of different antiviral delivery systems, this review focuses on advances in antiviral drug delivery systems based on chitosan (CS) and derivatized CS carriers. CS and its derivatives are evaluated concerning methods of their preparation, their basic characteristics and properties, approaches to the incorporation of an antiviral drug in the CS polymer as well as CS nanoparticulate systems, and their recent biomedical applications in the context of actual antiviral therapy. The degree of development (i.e., research study, in vitro/ex vivo/in vivo preclinical testing), as well as benefits and limitations of CS polymer and CS nanoparticulate drug delivery systems, are reported for particular viral diseases and corresponding antivirotics.

Biodistribution of progesterone in the eye after topical ocular administration via drops or inserts

Progesterone (PG) has been shown to have a slowing effect on photoreceptor cell death in mouse models of retinitis pigmentosa when administered orally. The aim of this study was to investigate whether ophthalmically administered progesterone was able to reach neuroretina and thus, the distribution through ocular tissues of different PG formulations was studied. The effect of different initial PG concentration was also investigated. Different formulations with PG in their composition (drops, a corneal/scleral-insert and scleral-inserts) were prepared and assayed. Using whole porcine eyes, the different formulations were topically administered to the ocular surface. Frozen eyes were dissected, the PG in each tissue was extracted in acetonitrile and the amount of PG quantified by UHPLC-MS/MS. Our results show that after topical administration, PG diffuses from the ocular surface and distributes throughout all tissues of the eye. Lower levels of PG were found in sclera, choroid and neuroretina when PG was applied as drops compared to inserts. Our results also show that an increase in the initial PG concentrations applied, resulted in a statistically significant increase in the amounts of PG in aqueous humour, sclera, choroid and neuroretina.

Management and control of intraocular pressure applying macitentan hydrogel film formulation: improved effect of surfactant and cosurfactant system

BACKGROUND

Macitentan blocks endothelin receptors in order to control the pulmonary arterial hypertension (PAH). Oral administration of macitentan is associated with painful urination and troubled breathing.

OBJECTIVES

Formulated macitentan hydrogel film was used for examining the control of intraocular pressure, and the effect of surfactant and cosurfactant was studied.

METHODS

Macitentan ocular film formulation has been prepared in hydroxypropyl methylcellulose (HPMC) matrix system using different surfactant/co-surfactant system, and intraocular pressure was monitored on normotensive rabbit eyes after application in the cul-de-sac.

RESULTS

The solid state characterization of the film indicated amorphisation of macitentan and no issues regarding major incompatibility was observed. Combination of surfactant, co-surfactant and hydrophilic co-solvent systems in the said films markedly improved the drug release and mucosal tissue permeation. Presence of PEG and Transcutol significantly improved ex vivo corneal permeation of MP and MT respectively compared to other films. Transcutol (MT) exhibited greatest difference among the formulations by improving the vesicular bilayer fluidity and reducing the mucosal tissue barrier facilitating the transcorneal diffusion. A combination of diffusion and erosion control behavior was observed in drug release and corneal permeation of the films due to the balanced liquid penetration and polymeric chain relaxation rate. MP and MT films were used for further in vivo studies to achieve possible effective and prolonged control of intraocular pressure. In vivo study has revealed the reduction in intraocular pressure upto about 23 % when tested on normotensive rabbit model. The films has managed to lower the IOP upto 3 h.

CONCLUSION

Developed macitentan hydrogel film containing Transcutol (MT) could have a high potential for the control and management of ocular hypertension after topical application.

Development, characterization, and ex vivo evaluation of an insert for the ocular administration of progesterone

Progesterone (PG) affords neuroprotection in degenerative diseases associated to oxidative stress, such as cataracts, age-related macular degeneration, glaucoma, diabetic retinopathy and retinitis pigmentosa. The aim of this project was to develop ocular inserts for delivery of PG to the eye. Different inserts with PG in its composition were formulated and the insert with the best characteristics (59% polyvinyl alcohol, 39% polyvinylpyrrolidone K30 and 2% propylene glycol) was selected for ex vivo studies. Physical characteristics and drug release patterns of the insert were analysed. In vitro diffusion studies revealed a controlled diffusion of progesterone. Ex vivo experiments demonstrated similar trans-corneal and trans-scleral PG diffusion (corneal apparent permeability coefficient 6.46 ± 0.38 × 10^-7 cm/s and scleral apparent permeability coefficient 5.87 ± 1.18 × 10^-7 cm/s; mean ± SD; n = 5). However, the amount of PG accumulated in scleras was statistically higher than in corneas (30.07 ± 9.09 μg/cm² and 15.56 ± 4.36 μg/cm² respectively). The PG-loaded inserts (55.6 μg/cm²) were thin, translucent, showed no irritancy (HET-CAM test) and were elastic and robust, all suitable properties for its potential use in the treatment of several ocular diseases.

Polyvinyl Alcohol/Chitosan Single-Layered and Polyvinyl Alcohol/Chitosan/Eudragit RL100 Multi-layered Electrospun Nanofibers as an Ocular Matrix for the Controlled Release of Ofloxacin: an In Vitro and In Vivo Evaluation

A novel nanofiber insert was prepared with a modified electrospinning method to enhance the ocular residence time of ofloxacin (OFX) and to provide a sustained release pattern by covering hydrophilic polymers, chitosan/polyvinyl alcohol (CS/PVA) nanofibers, with a hydrophobic polymer, Eudragit RL100 in layers, and by glutaraldehyde (GA) cross-linking of CS-PVA nanofibers for the treatment of infectious conjunctivitis. The morphology of the prepared nanofibers was studied using scanning electron microscopy (SEM). The average fiber diameter was found to be 123 ± 23 nm for the single electrospun nanofiber with no cross-linking (OFX-O). The single nanofibers, cross-linked for 10 h with GA (OFX-OG), had an average fiber diameter of 159 ± 30 nm. The amount of OFX released from the nanofibers was measured in vitro and in vivo using UV spectroscopy and microbial assay methods against Staphylococcus aureus, respectively. The antimicrobial efficiency of OFX formulated in cross-linked and non-cross-linked nanofibers was affirmed by observing the inhibition zones of Staphylococcus aureus and Escherichia coli. In vivo studies using the OFX nanofibrous inserts on a rabbit eye confirmed a sustained release pattern for up to 96 h. It was found that the cross-linking of the nanofibers by GA vapor could reduce the burst release of OFX from OFX-loaded CS/PVA in one layer and multi-layered nanofibers. In vivo results showed that the AUC_0–96 for the nanofibers was 9–20-folds higher compared to the OFX solution. This study thus demonstrates the potential of the nanofiber technology is being utilized to sustained drug release in ocular drug delivery systems.

Cyclodextrins in Antiviral Therapeutics and Vaccines

The present review describes the various roles of cyclodextrins (CDs) in vaccines against viruses and in antiviral therapeutics. The first section describes the most commonly studied application of cyclodextrins—solubilisation and stabilisation of antiviral drugs; some examples also refer to their beneficial taste-masking activity. The second part of the review describes the role of cyclodextrins in antiviral vaccine development and stabilisation, where they are employed as adjuvants and cryopreserving agents. In addition, cyclodextrin-based polymers as delivery systems for mRNA are currently under development. Lastly, the use of cyclodextrins as pharmaceutical active ingredients for the treatment of viral infections is explored. This new field of application is still taking its first steps. Nevertheless, promising results from the use of cyclodextrins as agents to treat other pathologies are encouraging. We present potential applications of the results reported in the literature and highlight the products that are already available on the market.

Formulation and Evaluation of Atorvastatin Calcium-Poly-ε-Caprolactone Nanoparticles Loaded Ocular Inserts for Sustained Release and Antiinflammatory Efficacy

PURPOSE

The work was performed to investigate the feasibility of preparing ocular inserts loaded with Poly-ε-Caprolactone (PCL) nanoparticles as a sustained ocular delivery system.

METHODS

First, Atorvastatin Calcium-Poly-ε-Caprolactone (ATC-PCL) nanoparticles were prepared and characterized. Then, the optimized nanoparticles were loaded within inserts formulated with Methylcellulose (MC) and Polyvinyl Alcohol (PVA) by a solvent casting technique and evaluated physically, for in-vitro drug release profile. Finally, an in-vivo study was performed on the selected formulation to prove non-irritability and sustained ocular anti-inflammatory efficacy compared with free drug-loaded ocuserts.

RESULTS

The results revealed (ATC-PCL) nanoparticles prepared with 0.5% pluronic F127 were optimized with 181.72±3.6 nm particle size, 0.12±0.02 (PDI) analysis, -27.4± 0.69 mV zeta potential and 62.41%±4.7% entrapment efficiency. Nanoparticles loaded ocuserts manifested compatibility between drug and formulation polymers. Moreover, formulations complied with average weight 0.055±0.002 to 0.143±0.023 mg, and accepted pH. ATC-PCL nanoparticles loaded inserts prepared by 5% MC showed more sustained, prolonged in-vitro release over 24h. In-vivo study emphasized non-irritability, ocular anti-inflammatory effectiveness represented by smaller lid closure scores, and statistically significant lowering in PMN count after 3h.

CONCLUSION

These findings proposed a possibly simple, new and affordable price technique to prepare promising (ATC-PCL) nanoparticles loaded inserts to achieve sustained release with prolonged antiinflammatory efficacy.

Supramolecular cyclodextrin complex: Diversity, safety, and applications in ocular therapeutics

Approximately 30-70% of the existing and new chemical entities exhibit poor aqueous solubility. For topical ocular delivery, drug molecules need to possess both hydrophilic and lipophilic nature to enable absorption through the aqueous tear layer and permeation through the corneal lipophilic barrier. To overcome the aqueous solubility related issues, various techniques such as solid dispersion, particle size reduction, cyclodextrin complexation, co-solvency, prodrug, derivatization, and salt formation are being explored in the healthcare sector. Cyclodextrin inclusion complexation techniques have been established by several pharmaceutical industries for systemic administration allowing a transition from the lab to the clinics. Though cyclodextrins are exploited in ocular drug delivery, there are prevailing concerns regarding its absorption enhancing capacity and mechanism, retention at the ocular surfaces and, irritation and toxicity profiles. In the present review, the efforts taken by various research groups to address the concerns of using cyclodextrin and its derivatives in ocular therapeutics are summarized. Also, considerations and utility of cyclodextrin systems in fabricating newer formulations such as contact lens, inserts, and implants have been discussed in the review.

Formulation of sustained release bioadhesive minitablets containing solid dispersion of levofloxacin for once daily ocular use

This study aimed to increase ocular residence time of levofloxacin by formulation into zero-order sustained release mucoadhesive minitablets for once daily administration using a hydrophobic-hydrophilic polymeric matrix. Levofloxacin was first formulated into solid dispersion with different ratios of Eudragit^® RS then the resulting solid dispersion was mixed with different concentrations of Carbopol^® and other excipients to be finally compressed into minitablets. A 2⁴ full factorial design was employed to estimate the effects and interactions of two formulation factors, and to establish their relationships with selected responses in the developed minitablets. The studied factors were: drug to Eudragit^® RS ratio, and percent of Carbopol^® in the minitablets. Sixteen ocular minitablets formulations were prepared and evaluated for the cumulative percentages drug release at 6, 12, and 24 h, as well as mucoadhesion time, mucoadhesive strength, and swelling index as response variables. After optimizing the responses, the optimized formulation was found to be stable on sterilization using gamma-irradiation and storage at 40 °C/75% RH for six months. In vivo testing of the optimized formulation showed that the minitablets extended levofloxacin release up to 24 h without causing any ocular irritation. The optimized formulation exhibited superior microbiological activity compared to the commercial product.

Ophthalmic gels: Past, present and future

Aqueous gels formulated using hydrophilic polymers (hydrogels) along with those based on stimuli responsive polymers (in situ gelling or gel forming systems) continue to attract increasing interest for various eye health-related applications. They allow the incorporation of a variety of ophthalmic pharmaceuticals to achieve therapeutic levels of drugs and bioactives at target ocular sites. The integration of sophisticated drug delivery technologies such as nanotechnology-based ones with intelligent and environment responsive systems can extend current treatment duration to provide more clinically relevant time courses (weeks and months instead of hours and days) which will inevitably reduce dose frequency, increase patient compliance and improve clinical outcomes. Novel applications and design of contact lenses and intracanalicular delivery devices along with the move towards integrating gels into various drug delivery devices like intraocular pumps, injections and implants has the potential to reduce comorbidities caused by glaucoma, corneal keratopathy, cataract, diabetic retinopathies and age-related macular degeneration. This review describes ophthalmic gelling systems with emphasis on mechanism of gel formation and application in ophthalmology. It provides a critical appraisal of the techniques and methods used in the characterization of ophthalmic preformed gels and in situ gelling systems along with a thorough insight into the safety and biocompatibility of these systems. Newly developed ophthalmic gels, hydrogels, preformed gels and in situ gelling systems including the latest in the area of stimuli responsive gels, molecularly imprinted gels, nanogels, 3D printed hydrogels; 3D printed devices comprising ophthalmic gels are covered. Finally, new applications of gels in the production of artificial corneas, corneal wound healing and hydrogel contact lenses are described.

A novel nanoparticles impregnated ocular insert for enhanced bioavailability to posterior segment of eye: In vitro, in vivo and stability studies

The present investigation was carried out to demonstrate with the help of in vitro and in vivo studies that nanoparticles impregnated ocular inserts effectively delivers significant concentration of drug to the posterior segment of eye after topical administration for treatment of glaucoma. Drug loaded Nanoparticles and their ocular insert have been reported to reduce side effects of orally administered Acetazolamide. Eudragit NPs were prepared by the solvent diffusion nanoprecipitation technique. The prepared NPs were evaluated for various parameters such as particle size, zeta potential, % entrapment efficiency, % drug loading, DSC, FTIR, TEM and stability studies. Ocular inserts of NPs were prepared by solvent casting method. The prepared ocular inserts were evaluated for thickness, content uniformity, folding endurance, disintegration time, morphology and stability study. The NPs and ocular inserts were evaluated for in-vitro drug diffusion study, ex-vivo trans-corneal permeability study, in-vivo ocular tolerability and intra ocular pressure (IOP) reduction study. The optimized batch was stable for a period of 3months in lyophilized form. The optimized formulations had size range of 367nm±8nm, zeta potential around +7mV±1.3mV and 51.61%±3.84% entrapment efficiency with 19%±1.40% drug loading. The ex-vivo trans-corneal study showed higher cumulative corneal permeation, flux across corneal tissue (2.460±0.028μg/ml) and apparent corneal permeability (3.926×10^-6cm²/s & 3.863×10^-6cm²/s) from drug loaded Eudragit NPs and Ocular inserts as compared to drug solution (0.671±0.020μg/ml & 3.166×10^-6cm²/s). In-vivo study showed the Eudragit NPs and ocular insert produced significant (P<0.001) lowering in intra ocular pressure compared with the solution of free drug after 3h of topical ocular administration. Plain Eudragit NPs caused no inflammation and/or discomfort in rabbit eyes and neither affected the intra ocular pressure establishing their safety and non irritancy.

Cyclodextrin complexes for treatment improvement in infectious diseases

Infectious diseases are a heterogeneous group of maladies that represent a serious burden to healthcare systems worldwide. Most of the available antimicrobial drugs display poor biopharmaceutical properties that compromise their effectiveness. Cyclodextrins (CDs) are cyclic oligosaccharides of glucopyranose formed by a variable number of repeating units that combine a hydrophilic surface with a hydrophobic cavity. The production of drug/CD complexes has become one of the most extensively investigated technology approaches to improve the stability, solubility, dissolution rate and bioavailability of drugs. The present work overviews the applications of CDs for the formulation of anti-infective agents along with the most relevant administration routes. Finally, an update on the complexes with CDs available on the market to treat infectious diseases is presented.

Analysis of steady state and non-steady state corneal permeation of diclofenac

The present study was undertaken for characterization of the steady state and non steady state corneal permeation kinetics of diclofenac potassium (DCP) using statistical moment theory.

PEGylated liposomes of anastrozole for long-term treatment of breast cancer: in vitro and in vivo evaluation

The aim of present study was to develop conventional and PEGylated (long circulating), liposomes containing anastrozole (ANS) for effective treatment of breast cancer. ANS is a third-generation non-steroidal aromatase inhibitor of the triazole class used for the treatment of advanced and late-stage breast cancer in post-menopausal women. Under such disease conditions the median duration of therapy should be prolonged until tumor regression ends (>31 months). Liposomes were prepared by the thin film hydration method by using ANS and various lipids such as soyaphosphatidyl choline, cholesterol and methoxy polyethylene glycol distearoyl ethanolamine in different concentration ratios and evaluated for physical characteristics, in vitro drug release and stability. Optimized formulations of liposome were studied for in vitro cytotoxic activity against the BT-549 and MCF-7 cell lines and in vivo behavior in Wistar rats. Preformulation studies, both Fourier transform infrared study and differential scanning calorimetry analysis showed no interaction between the drug and the excipients used in the formulations. The optimized formulations AL-07 and AL-09 liposomes showed encapsulation efficiencies in the range 65.12 ± 1.05% to 69.85 ± 3.2% with desired mean particle size distribution of 101.1 ± 5.9 and 120.2 ± 2.8 nm and zeta potentials of -43.7 ± 4.7 and -62.9 ± 3.5 mV. All the optimized formulations followed Higuchi-matrix release kinetics and when plotted in accordance with the Korsemeyer-Peppas method, the n-value 0.5 < n < 1.0 suggests an anomalous (non-Fickian) transport. Likewise, the PEGylated liposomes showed greater tumor growth inhibition on BT-549 and MCF-7 cell lines from in vitro cytotoxicity studies (p < 0.05). Pharmacokinetic study of conventional and PEGylated liposomes in Wistar rats demonstrated a 3.33- and 20.28-fold increase in AUC(0-∞) values when compared to pure drug (p < 0.001). Among the formulations, PEGylated liposomes showed encouraging results by way of their long circulation and sustained delivery properties for effective treatment of breast cancer.

Novel drug delivery approaches on antiviral and antiretroviral agents

Viruses have the property to replicate very fast in host cell. It can attack any part of host cell. Therefore, the clinical efficacy of antiviral drugs and its bioavailability is more important concern taken into account to treat viral infections. The oral and parenteral routes of drug administration have several shortcomings, however, which could lead to the search for formulating better delivery systems. Now, a day's novel drug delivery systems (NDDS) proved to be a better approach to enhance the effectiveness of the antivirals and improve the patient compliance and decrease the adverse effect. The NDDS have reduced the dosing frequency and shorten the duration of treatment, thus, which could lead the treatment more cost-effective. The development of NDDS for antiviral and antiretroviral therapy aims to deliver the drug devoid of toxicity, with high compatibility and biodegradability, targeting the drug to specific sites for viral infection and in some instances it also avoid the first pass metabolism effect. This article aims to discuss the usefulness of novel delivery approaches of antiviral agents such as niosomes, microspheres, microemulsions, nanoparticles that are used in the treatment of various Herpes viruses and in human immunodeficiency virus (HIV) infections.

Biodegradable ocular inserts for sustained delivery of brimonidine tartarate: preparation and in vitro/in vivo evaluation

The bioavailability of therapeutic agents from eye drops is usually limited due to corneal barrier functions and effective eye protective mechanisms. Therefore, the current study aims to enhance ocular bioavailability of brimonidine, a potent antiglaucoma drug, through the preparation of ocular inserts. Solvent casting technique was employed to prepare the inserts using polyvinylpyrrolidone K-90 (PVP K-90) as film-forming polymer blended with different viscosity grades of bioadhesive polymers namely hydroxypropyl methycellulose, carbopol, sodium alginate, and chitosan. The prepared ocular inserts were evaluated for various physicochemical parameters, swelling behavior, and in vitro release patterns. Sodium alginate-based ocular inserts revealed the most sustainment in drug release (99% at 6 h), so it was selected for further modifications via coating it, on one side or dual sides, using hydrophobic film composed of either ethylcellulose or Eudragit RSPO. The obtained in vitro release results for the modified ocular inserts revealed that ethylcellulose is superior to Eudragit RSPO in terms of brimonidine release sustainment effect. Ocular inserts composed of 7% PVP K-90, 1.5% low molecular weight sodium alginate with or without ethylcellulose coat were able to sustain the in vitro release of brimonidine. Their therapeutic efficacy regarding intraocular pressure (IOP) lowering effect when inserted in albino rabbits eyes showed superior sustainment effect compared with that of brimonidine solution. Furthermore, due to both the mucoadhesive property and the drug sustainment effect, the one-side-coated ocular insert showed more IOP lowering effect compared with that of its non-coated or dual-side-coated counterpart.

Sustained release optimized formulation of anastrozole-loaded chitosan microspheres: in vitro and in vivo evaluation

The purpose of this study was to develop sustained release formulation of anastrozole-loaded chitosan microspheres for treatment of breast cancer. Chitosan microspheres cross-linked with two different cross-linking agents viz, tripolyphosphate (TPP) and glutaraldehyde (GA) were prepared using single emulsion (w/o) method. A reverse phase HPLC method was developed and used for quantification of drug in microspheres and rat plasma. Influence of cross-linking agents on the properties of chitosan microspheres was extensively investigated. Formulations were characterized for encapsulation efficiency (EE), compatibility of drug with excipients, particle size, surface morphology, swelling capacity, erosion and drug release profile in phosphate buffer pH 7.4. EE varied from 30.4 ± 1.2 to 69.2 ± 3.2% and mean particle size distribution ranged from 72.5 ± 0.5 to 157.9 ± 1.5 μm. SEM analysis revealed smooth and spherical nature of microspheres. TPP microspheres exhibited higher swelling capacity, percentage erosion and drug release compared to GA microspheres. Release of anastrozole (ANS) was rapid up to 4 h followed by slow release status. FTIR analysis revealed no chemical interaction between drug and polymer. DSC analysis indicated ANS trapped in the microspheres existed in amorphous form in polymer matrix. The highest correlation coefficients (R (2)) were obtained for Higuchi model, suggesting a diffusion controlled mechanism. There was significant difference in the pharmacokinetic parameters (AUC(0-∞), Kel and t(1/2)) when ANS was formulated in the form of microspheres compared to pure drug. This may be attributed to slow release rate of ANS from chitosan microspheres and was detectable in rat plasma up to 48 h which correlates well with the in vitro release data.