Continued stabilization of trabecular metal tibial monoblock total knee arthroplasty components at 5 years-measured with radiostereometric analysis

Fixation options for total knee arthroplasty: a comprehensive literature review

Total knee arthroplasty is a consistently successful, cost-efficient, and highly effective surgical procedure for treating severe knee osteoarthritis. The success and longevity of total knee arthroplasty depend significantly on the fixation method used to secure the prosthetic components. This comprehensive review examines the primary fixation methods (cemented, cementless, and hybrid fixation), analysing their biomechanics, clinical outcomes, advantages, and disadvantages, focusing on recent advances and trends in total knee arthroplasty fixation.

Prospective randomized study on the effect of concurrent bone filling of tibial peg holes in cementless total knee arthroplasty

BACKGROUND

In total knee arthroplasty (TKA), cementless fixation is initially weaker than cement fixation. This study aimed to examine whether filling the tibial peg holes with bone improves initial fixation strength in cementless TKA.

METHODS

This prospective, comparative study examined 88 joints in 66 patients randomized to the bone filling (48 joints) or conventional group (no bone filling; 40 joints). All patients underwent TKA with the NexGen® trabecular metal modular tibial component. In the bone filling group, resected cancellous bone was filled into the peg holes before insertion of the tibial component. We performed clinical and plain radiographic evaluations after the operation and measured bone mineral density (BMD) at five sites below the component at 1, 3, 6, and 12 months postoperatively.

RESULTS

Operative time and clinical evaluations were not significantly different. Plain radiography showed significant longitudinal thickening of the trabecula below the peg (P<0.05) and decreased occurrence of reactive lines (P=0.07) in the bone filling group compared with the conventional group. BMD was significantly higher in the bone filling group in the medial region below the peg at 1, 3, and 6 months and in the central region at 1 and 3 months (all P<0.05).

CONCLUSIONS

When using the NexGen trabecular metal modular tibial component, concurrent peg hole bone filling increases the initial component fixation strength. Possible effects on long-term stabilization warrant further study.

Trend of using cementless total knee arthroplasty: a nationwide analysis from 2015 to 2021

BACKGROUND

Modern cementless total knee arthroplasty (TKA) fixation has shown comparable long-term outcomes to cemented TKA, but the trend of using cementless TKA remains unclear. This study aimed to investigate the trend of using cementless TKA based on a national database.

METHODS

The patients undergoing cementless TKA between 2015 and 2021 were retrospectively extracted from the PearlDiver (Mariner dataset) Database. The annual percentage of cementless TKA was calculated using the following formula: annual number of cementless TKA/annual number of TKA. The trend of the number of patients undergoing cementless TKA was created according to a compounded annual growth rate (CAGR) calculation of annual percentages. Patient age, comorbidity, region, insurance type, etc., were also investigated. Differences were considered statistically significant at P < 0.05.

RESULTS

Of the 574,848 patients who received TKA, 546,731 (95%) underwent cemented fixation and 28,117 (5%) underwent cementless fixation. From 2015 to 2021, the use of cementless TKA significantly increased by 242% from 3 to 9% (compounded annual growth rate (CAGR): + 20%; P < 0.05). From 2015 to 2021, we observed a CAGR greater than 15% for all age groups (< 50, 50-59, 60-69, 70-74, 75 +), insurance types (cash, commercial, government, Medicare, Medicaid), regions (Midwest, Northeast, South, West), sex (male and female), and certain comorbidities (osteoporosis, diabetes mellitus, tobacco use, underweight (BMI < 18.5), rheumatoid arthritis) (P < 0.05 for all). Patients undergoing TKA with chronic kidney disease, prior fragility fractures, and dementia demonstrated a CAGR of + 9%-13% from 2015 to 2021 (P < 0.05).

CONCLUSION

From 2015 to 2021, the use of cementless TKA saw a dramatic increase in all patient populations. However, there is still no consensus on when to cement and in whom. Clinical practice guidelines are needed to ensure safe and effective use of cementless fixation.

Efficacy of cementless porous tantalum tibial components versus cemented tibial components in primary total knee arthroplasty: A meta-analysis

BACKGROUND

Total knee arthroplasty involves the use of cemented tibial components for fixation. In recent years, cementless porous tantalum tibial components have been increasingly utilized. The aim of this meta-analysis was to compare the efficacy of cementless porous tantalum tibial components with traditional cemented tibial components in terms of postoperative outcomes following total knee arthroplasty.

METHODS

Relevant literature was retrieved from Cochrane Library, PubMed, Embase, and Web of Science using the search terms "(trabecular metal OR Porous tantalum)" AND "knee" up to July 2023. The weighted mean difference with a 95% confidence interval was used as the effect size measure to evaluate the functional recovery of the knee joint, radiological analysis, complications, and implant revisions between cementless porous tantalum tibial components and traditional cemented tibial components after total knee arthroplasty. Review Manager 5.3 was utilized to conduct a comparative analysis of all included studies.

RESULTS

Nine studies with a total of 1117 patients were included in this meta-analysis, consisting of 447 patients in the porous tantalum group and 670 patients in the cemented group. Radiological analysis demonstrated that the porous tantalum group had better outcomes than the cemented group (P < .05). The combined results for the 5-year and 10-year follow-ups, range of motion, Western Ontario and McMaster University Osteoarthritis Index, complications, and implant revisions showed no significant differences between the porous tantalum and cemented groups.

CONCLUSION

The results of the 5-year and 10-year follow-ups indicate that the use of cementless porous tantalum tibial components is comparable to traditional cemented tibial components, with no significant advantages observed. However, at the 5-year follow-up, the porous tantalum group demonstrated a good bone density in the proximal tibia. Future studies with a larger sample size, long-term clinical follow-up, and radiological results are needed to verify the differences between the 2 implants.

Influence of marker-selection method in radiostereometric analysis of total knee arthroplasty on tibial baseplate migration patterns: a secondary analysis of a randomized controlled trial with 5-year follow-up

BACKGROUND AND PURPOSE

Different marker-selection methods are applied to represent implant and tibial segments in radiostereometric analysis (RSA) studies of total knee arthroplasty (TKA). Either a consistent set of markers throughout subsequent RSA examinations ("consistent-marker method") is used or all available markers at each follow-up ("all-marker method"). The aim of this secondary analysis was to compare marker-selection methods on individual and group level TKA migration results.

METHODS

Data from a randomized RSA study with 72 patients was included. Tibial baseplate migration was evaluated at 3 months, 1, 2, and 5 years postoperatively with both marker-selection methods. Additionally, migration was calculated using 5 fictive points, either plotted based on the consistent set of markers or all available markers.

RESULTS

Migration could be calculated with both marker-selection methods for 248 examinations. The same prosthesis and bone markers (n = 136), different prosthesis markers (n = 71), different bone markers (n = 21), or different prosthesis and bone markers (n = 20) were used. The mean difference in maximum total point motion (MTPM) between all examinations was 0.02 mm, 95% confidence interval -0.26 to 0.31 mm. 5 implants were classified as continuously migrating with the consistent-marker method versus 6 implants (same 5 plus one additional implant) with the all-marker method. Using fictive points, fewer implants were classified as continuously migrating in both marker-selection methods. Differences between TKA groups in mean MTPM were comparable with both marker-selection methods, also when fictive points were used.

CONCLUSION

Estimated group differences in mean MTPM were similar between marker-selection methods, but individual migration results differed. The latter has implications when classifying implants for estimated risk of future loosening.

New Horizons of Cementless Total Knee Arthroplasty

BACKGROUND

Considering the increasing number of young and active patients needing TKA, orthopedic surgeons are looking for a long-lasting and physiological bond for the prosthetic implant. Multiple advantages have been associated with cementless fixation including higher preservation of the native bone stock, avoidance of cement debris with subsequent potential third-body wear, and the achievement of a natural bond and osseointegration between the implant and the bone that will provide a durable and stable fixation.

DISCUSSION

Innovations in technology and design have helped modern cementless TKA implants to improve dramatically. Better coefficient of friction and reduced Young's modulus mismatch between the implant and host bone have been related to the use of porous metal surfaces. Moreover, biologically active coatings have been used on modern implants such as periapatite and hydroxyapatite. These factors have increased the potential for ingrowth by reducing micromotion and increasing osteoconductive properties. New materials with better biocompatibility, porosity, and roughness have been introduced to increase implant stability.

CONCLUSIONS

Innovations in technology and design have helped modern cementless TKA implants improve primary stability in both the femur and tibia. This means that short-term follow-up are comparable to cemented. These positive prognostic factors may lead to a future in which cementless fixation may be considered the gold-standard technique in young and active patients.

Continued Stabilization of a Cementless 3D-Printed Total Knee Arthroplasty: Five-Year Results of a Randomized Controlled Trial Using Radiostereometric Analysis

BACKGROUND

Three-dimensional (3D) printing of highly porous orthopaedic implants aims to promote better osseointegration, thus preventing aseptic loosening. However, short-term radiostereometric analysis (RSA) after total knee arthroplasty (TKA) has shown higher initial migration of cementless 3D-printed tibial components compared with their cemented counterparts. Therefore, critical evaluation of longer-term tibial component migration is needed. We investigated migration of a cementless 3D-printed and a cemented tibial component with otherwise similar TKA design during 5 years of follow-up, particularly the progression in migration beyond 2 years postoperatively.

METHODS

Seventy-two patients were randomized to a cementless 3D-printed Triathlon Tritanium (Stryker) cruciate-retaining (CR) TKA or a cemented Triathlon CR (Stryker) TKA implant. Implant migration was evaluated with RSA at baseline and postoperatively at 3 months and at 1, 2, and 5 years. The maximum total point motion (MTPM) of the tibial component was compared between the groups at 5 years, and progression in migration was assessed between 2 and 5 years. Individual implants were classified as continuously migrating if the MTPM was ≥0.1 mm/year beyond 2 years postoperatively. Clinical scores were evaluated, and a linear mixed-effects model was used to analyze repeated measurements.

RESULTS

At 5 years, the mean MTPM was 0.66 mm (95% confidence interval [CI], 0.56 to 0.78 mm) for the cementless group and 0.53 mm (95% CI, 0.43 to 0.64 mm) for the cemented group (p = 0.09). Between 2 and 5 years, there was no progression in mean MTPM for the cementless group (0.02 mm; 95% CI, -0.06 to 0.10 mm) versus 0.07 mm (95% CI, 0.00 to 0.14) for the cemented group. One implant was continuously migrating in the cementless group, and 4 were continuously migrating in the cemented group. The clinical scores were comparable between the groups across the entire time of follow-up.

CONCLUSIONS

No significant difference in mean migration was found at 5 years between the cementless and cemented TKA implants. Progression of tibial component migration was present beyond 2 years for the cemented implant, whereas the cementless implant remained stable after initial early migration.

LEVEL OF EVIDENCE

Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.

Comparative Analysis of the Tibial Component Migration After Cemented and Uncemented Total Knee Arthroplasty with a Hydroxyapatite Coating in Two, Five, and Ten Years: A Meta-Analysis

Objective  This study evaluated and compared the tibial component migration in cemented and uncemented total knee arthroplasty (TKA) with no hydroxyapatite coating 2, 5, and 10 years after surgery. Methods  This meta-analysis followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) based on PubMed and MeSH database queries from June to July 2022. Results  The meta-analysis included eight randomized clinical studies evaluating 668 knees undergoing TKA. The maximum total point motion (MTPM) in cemented TKAs was higher in 5 years, with a mean value of 0.67 mm (95% confidence interval [CI], 0.52 to 0.87). Uncemented TKAs also presented higher mean MTPM in 5 years (1 mm; 95% CI, 0.82 to 1.22). Uncemented coated ATKs had a higher mean MTPM in 10 years (1.30 mm; 95% CI, 0.70 to 2.39). MTPM was statistically similar in the short- and long-term for cemented and uncemented techniques, with a standardized mean difference of -0.65 (95% CI, -1.65 to 0.35). Conclusion Tibial component migration in TKA was statistically similar at 2, 5, and 10 years in cemented and uncemented techniques, either with or without coating. However, due to the scarce literature, further studies are required with a longer follow-up time.

The impact of prior fragility fractures on long-term periprosthetic fracture risk following total knee arthroplasty

The study found that patients undergoing total knee arthroplasty with prior fragility fracture had increased risk of subsequent fragility fracture and periprosthetic fracture within 8 years postoperatively when compared to those without a prior history. However, these patients were not at increased risk for all-cause revision within this period.

PURPOSE

The aim of this study was to characterize the association of prior FFs on long-term risk of secondary fragility fracture (FF), periprosthetic fracture (PPF), and revision TKA.

METHODS

Patients at least 50 years of age who underwent elective TKA were identified in the PearlDiver Database. Patients were stratified based on whether they sustained a FF within 3 years prior to TKA (7410 patients) or not (712,954 patients). Demographics and comorbidities were collected. Kaplan Meier analysis was used to observe the cumulative incidence of all-cause revision, PPF, and secondary FF within 8 years of TKA. Cox Proportional hazard ratio analysis was used to statistically compare the risk.

RESULTS

In total, 1.0% of patients had a FF within three years of TKA. Of these patients, only 22.6% and 10.9% had a coded diagnosis of osteoporosis and osteopenia, respectively, at time of TKA. The 8-year cumulative incidence of secondary FF and periprosthetic fracture was significantly higher in those with a prior FF (27.5% secondary FF and 1.9% PPF) when compared to those without (9.1% secondary FF and 0.7% PPF). After adjusting for covariates, patients with a recent FF had significantly higher risks of secondary FF (HR 2.73; p < 0.001) and periprosthetic fracture (HR 1.86; p < 0.001) than those without a recent FF.

CONCLUSIONS

Recent FF before TKA is associated with increased risk for additional FF and PPF within 8 years following TKA. Surgeons should ensure appropriate management of fragility fracture is undertaken prior to TKA to minimize fracture risk, and if not, be vigilant to identify patients with prior FF or other bone health risk factors who may have undocumented osteoporosis.

Is Cementless Total Knee Arthroplasty Safe in Women Over 75 Y of Age?

BACKGROUND

Cementless total knee arthroplasty (TKA) is the subject of renewed interest. Previous concerns about survivorship have been addressed and there is an appeal in terms of biological fixation and surgical efficiency. However, even surgeon advocates have concerns about the risk of marked subsidence when using this technology in older patients at risk for osteoporosis.

METHODS

This was a retrospective analysis of 1,000 consecutive fully cementless mobile bearing TKAs performed at a single institution on women over 75 years of age who had postoperative and 1-year x-rays. The primary outcome was the incidence of subsidence.

RESULTS

There were three asymptomatic cases with definite subsidence and change in alignment. In a fourth symptomatic case, the femoral component subsided into varus and the tibia into valgus, thus maintaining alignment which facilitated nonoperative treatment in a 92-year-old. Overall, at 1 year, there were two- liner revisions for infection without recurrence. Five patients had further surgery, of which three were washouts and two were for periprosthetic fractures sustained postoperatively within 1 year. Seven patients had further anesthesia, of which five were manipulations and two were nonrecurrent closed reductions for spinouts.

CONCLUSION

Cementless TKA did not have a high risk of subsidence in this at-risk population. In the hands of experienced surgeons, these procedures can be used safely irrespective of bone quality.

Clinical Outcomes of the Lateral Trabecular Metal Total Ankle Replacement at a 5-Year Minimum Follow-up

BACKGROUND

The Trabecular Metal (Zimmer Biomet, Warsaw, IN) total ankle arthroplasty (TAA) system uses a lateral approach with a fibular osteotomy to gain access to the tibiotalar joint and a sagittally curved tibial component. This is the first TAA system to laterally approach the ankle, and few studies have explored outcomes associated with this implant. This study aimed to report the 5-year clinical and radiographic outcomes as well as the survivorship of the implant.

METHODS

Over a 3-year period, 2 fellowship-trained foot and ankle surgeons used this implant system to treat 38 end-stage arthritic ankles. Reoperation and revision data were collected from all patients (100%) as part of the local prospective database. Patients completed the Foot and Ankle Outcome Score (FAOS) questionnaire preoperatively and at each annual follow-up visit; scores for a minimum of 5 years were available for 28 (73.7%) patients. A radiographic analysis compared postoperative coronal and sagittal alignment in weightbearing radiographs at a minimum of 5 years with that at 3 months postoperatively, as well as cyst or lucency formation, which was available for 21 patients (55.3%).

RESULTS

At 5 years, there were 3 revisions (7.9%) and 9 reoperations (23.7%). Reoperations included 4 fibular hardware removal and 5 medial gutter debridement procedures. The FAOS significantly improved for all domains (P < .05). Implant positioning did not significantly change between 3 months and 5 years postoperatively.

CONCLUSION

Our 5-year results in this small series using this unique prosthesis showed good overall survivorship (92.1%) and a reoperation rate of 23.7%, along with clinically significant improvement in patient-reported outcomes.

LEVELS OF EVIDENCE

Level IV: Retrospective case series.

Trabecular metal monoblock versus modular tibial trays in total knee arthroplasty: meta-analysis of randomized control trials

PURPOSE

Total knee arthroplasty is one of the significantly evolving procedures with different knee designs available in the market. The continued development of these prosthesis resulted in improvement of the implant survivorship and patient satisfaction. This study is an RCT-based meta-analysis aimed to compare two designs of total knee replacement: the conventional modular and the monoblock trabecular metal tibial trays.

METHODS

This meta-analysis was performed by a literature review according to the PRISMA guidelines. A detailed search of the English literature was done using the PubMed, Medline, CINAHL, Cochrane, Embase, and Google Scholar databases. Only randomized control trials were included in the analysis after ensuring homogeneity. RevMan V.5.0.18.33 (The Cochrane Collaboration, Copenhagen, Denmark) was used to perform the meta-analysis. Extracted outcome measures were Knee Society score, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, survivorship, complication rate, and radiostereographic analysis.

RESULTS

Seven randomized control trials with 635 patients were eligible for our analysis after they met our inclusion criteria. Three hundred twelve patients received monoblock tibias, and the other 323 patients received modular tibial trays during their total knee arthroplasty surgeries. There were statistically significant superiority of the modular knees in the functional Knee Society and WOMAC scores at five years (P = 0.003 and 0.05, respectively). The modular design was also more stable on RSA at two years (P < 0.0001).

CONCLUSION

Modular and monoblock tibial trays are comparable knee designs with comparable survivorship and complication rates. However, the modular knees had better mid-term functional outcome and are more stable on radiostereographic analysis.

Redefining Indications for Modern Cementless Total Knee Arthroplasty: Clinical Outcomes and Survivorship in Patients >75 Years Old

BACKGROUND

Most studies on cementless total knee arthroplasty (TKA) have excluded patients >75 years due to concerns that older patients have poorer bone mineral density and osteogenic activity. This study compared the midterm outcomes and survivorship of cemented and cementless TKA of the same modern design performed in patients >75 years.

METHODS

We identified a consecutive series of 120 primary cementless TKA performed in patients >75 years. Each case was propensity score matched 1:3 with 360 cemented TKA of the same modern design based on age, sex, body mass index, Charlson Comorbidity Index, bilateral procedures, liner type, and year of surgery. Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS-JR) and Short Form-12 (SF-12) were collected preoperatively, at 6 months and 2 years. Implant survivorship was recorded at mean 4.2 years (range, 2.0-7.9).

RESULTS

Mean age was 79.0 ± 3.4 years (range, 75-92) in the cemented cohort and 78.9 ± 3.5 (range, 75-91) in the cementless cohort (P = .769). There was no difference in final postoperative scores or improvement in scores at 2 years. The percentage of patients that met the minimal clinically important difference was also similar (KOOS-JR, 68.9% vs 69.2%, P = .955; SF-12 Physical, 71.7% vs 66.7%, P = .299). Seven-year survivorship free from aseptic revision was 99.4% for cemented knees and 100% for cementless knees (log-rank, P = .453).

CONCLUSION

Patients over 75 years undergoing cementless or cemented TKA of the same modern design had comparable outcomes and survivorship in the midterm. The theoretical risks of cementless fixation in this age group were not realized in this study.

Previously Unrecognized Source of Error in the Change in Maximum Total Point Motion to Determine Continuous Migration of Unstable Tibial Baseplates

In radiostereometric analysis (RSA), continuous migration denoted as ΔMTPM is the difference between maximum total point motion (MTPM) at 2 years relative to time zero and MTPM at 1 year relative to time zero. Continuous migration has been used to diagnose tibial baseplates as stable versus unstable when compared to a specified stability limit (i.e., value of ΔMTPM). If the same point experiences MTPM at 2 years and at 1 year (usually the case for marker-based RSA), then an implicit assumption is that the migration path between 2 years and 1 year is the same as the path between 1 year and time zero. This article uses vector analysis to demonstrate a source of error in ΔMTPM not previously recognized and estimates the magnitude of error based on the interplay of independent variables which affect the error. The two independent variables which affect the error are the angle between the two migration vectors (i.e., MTPM between time zero and 2 years and MTPM between time zero and 1 year) and the difference in magnitude of the two vectors. The relative error increased in an absolute sense as the angle between the vectors increased and decreased for larger differences in the magnitudes of the two vectors. For magnitude ratios ranging from 1.25 to 2, relative errors ranged from -21% to -3% at 10 deg and from -78% to -42% at 60 deg, respectively. Knowledge of these errors highlights a limitation in the use of ΔMTPM not previously recognized.

Maximum Total Point Motion of Five Points Versus All Points in Assessing Tibial Baseplate Stability

Maximum total point motion (MTPM), the point on a baseplate that migrates the most, has been used to assess the risk of tibial baseplate loosening using radiostereometric analysis (RSA). Two methods for determining MTPM for model-based RSA are to use either five points distributed around the perimeter of the baseplate or to use all points on the three-dimensional model. The objectives were to quantify the mean difference in MTPM using five points versus all points, compute the percent error relative to the 6-month stability limit for groups of patients, and determine the dependency of differences in MTPM on baseplate size and shape. A dataset of 10,000 migration values was generated using the mean and standard deviation of migration in six-degrees-of-freedom at 6 months from an RSA study. The dataset was used to simulate the migration of three-dimensional models (two baseplate shapes and two baseplate sizes) and calculate the difference in MTPM using five virtual points versus all points and the percent error (i.e., the difference in MTPM/stability limit) relative to the 6-month stability limit. The difference in the MTPM was about 0.02 mm, or 4% relative to the 6-month stability limit, which is not clinically important. Furthermore, results were not affected by baseplate shape or size. Researchers can decide whether to use five points or all points when computing MTPM for model-based RSA. The authors recommend using five points to maintain consistency with marker-based RSA.

Fragility Index as a Measure of Randomized Clinical Trial Quality in Adult Reconstruction: A Systematic Review

Background

The Fragility Index (FI) and Reverse Fragility Index are powerful tools to supplement the P value in evaluation of randomized clinical trial (RCT) outcomes. These metrics are defined as the number of patients needed to change the significance level of an outcome. The purpose of this study was to calculate these metrics for published RCTs in total joint arthroplasty (TJA).

Methods

We performed a systematic review of RCTs in TJA over the last decade. For each study, we calculated the FI (for statistically significant outcomes) or Reverse Fragility Index (for nonstatistically significant outcomes) for all dichotomous, categorical outcomes. We also used the Pearson correlation coefficient to evaluate publication-level variables.

Results

We included 104 studies with 473 outcomes; 92 were significant, and 381 were nonstatistically significant. The median FI was 6 overall and 4 and 7 for significant and nonsignificant outcomes, respectively. There was a positive correlation between FI and sample size (R = 0.14, P = .002) and between FI and P values (R = 0.197, P = .000012).

Conclusions

This study is the largest evaluation of FI in orthopedics literature to date. We found a median FI that was comparable to or higher than FIs calculated in other orthopedic subspecialties. Although the mean and median FIs were greater than the 2 recommended by the American Academy of Orthopaedic Surgeons Clinical Practice Guidelines to demonstrate strong evidence, a large percentage of studies have an FI < 2. This suggests that the TJA literature is on par or slightly better than other subspecialties, but improvements must be made.

Level of Evidence

Level I; Systematic Review.

Propagation of registration error into maximum total point motion to analyze tibial baseplate stability at six months using marker-based and model-based RSA

Maximum total point motion (MTPM) of a tibial baseplate at 6 months is used to predict long-term aseptic loosening after total knee arthroplasty. However, the propagation of registration error into MTPM for stable baseplates (i.e. baseplates with MTPM < 0.5 mm) manifested as bias (i.e. systematic error) and precision (i.e. random error) has not been quantified and compared to the 6-month stability limit for marker-based and model-based RSA, which have different magnitudes of registration error. To determine the bias and precision in MTPM for stable baseplates, registration errors in six degrees of freedom reported in the literature for marker-based and model-based RSA were applied to an example baseplate using computer simulations. Results revealed that the bias in MTPM for stable baseplates with model-based RSA is three to four times that of marker-based RSA, and that the precision in MTPM for stable baseplates with model-based RSA is double that of marker-based RSA. This assessment of bias and precision in MTPM for stable baseplates led to a method for adjusting the 6-month stability limit for model-based RSA where half the width of the 95% confidence interval on the mean MTPM and the bias in MTPM for marker-based RSA were subtracted from 0.5 mm to compute true MTPM. The bias in MTPM and half the width of the 95% confidence interval on the mean MTPM for model-based RSA were then added to the true MTPM to obtain the adjusted stability limit for model-based RSA which ranged from 0.57 mm to 0.64 mm.

Two-year RSA migration results of symmetrical and asymmetrical tibial components in total knee arthroplasty: a randomized controlled trial

AIMS

The objective of this study was to compare the two-year migration pattern and clinical outcomes of a total knee arthroplasty (TKA) with an asymmetrical tibial design (Persona PS) and a well-proven TKA with a symmetrical tibial design (NexGen LPS).

METHODS

A randomized controlled radiostereometric analysis (RSA) trial was conducted including 75 cemented posterior-stabilized TKAs. Implant migration was measured with RSA. Maximum total point motion (MTPM), translations, rotations, clinical outcomes, and patient-reported outcome measures (PROMs) were assessed at one week postoperatively and at three, six, 12, and 24 months postoperatively.

RESULTS

A linear mixed-effect model using RSA data of 31 asymmetrical and 38 symmetrical TKAs did not show a difference in mean MTPM migration pattern of the tibial or femoral components. Mean tibial component MTPM at two years postoperative of the asymmetrical TKA design was 0.93 mm and 1.00 mm for the symmetrical design. For the femoral component these values were 1.04 mm and 1.14 mm, respectively. No significant differences were observed in other migration parameters or in clinical and PROM measurements.

CONCLUSION

The TKA design with an asymmetrical tibial component has comparable component migration with the proven TKA with a symmetrical tibial component. This suggests the risk of long-term aseptic loosening of the two designs is comparable. Cite this article: Bone Joint J 2021;103-B(5):855-863.

Less polyethylene wear in monobloc compared to modular ultra-high-molecular-weight-polyethylene inlays in hybrid total knee arthroplasty: A 5-year randomized radiostereometry study

BACKGROUND

A modular polyethylene (PE) inlay in total knee arthroplasty (TKA) may wear on both sides. PE particles may induce osteolysis, which can lead to implant loosening. The aim of this study was to determine if PE wear in monobloc TKA differs from that ofmodular TKA at 60-month follow-up.

PATIENTS AND METHODS

In a prospective, patient-blinded trial, 50 patients were randomized to hybrid TKA surgery with either acementless high-porosity trabecular-metal tibial component with a monobloc UHMWPE inlay (MONO-TM) or a cementless low-porosity screw-augmented titanium fiber-mesh tibial component with a modular UHMWPE inlay (MODULAR-FM). Radiostereometry was used to measure PE wear and tibial component migration.

RESULTS

At 60-monthfollow-up, mean PE wear of the medial compartment was 0.24 mm and 0.61 mm and mean PE wear of the lateral compartment was 0.31 mm and 0.82 mm for the MONO-TM and the MODULAR-FM groups, respectively (p < 0.01). The PE wear-rate was 0.05 mm (95% CI 0.03-0.08) in the MONO-TM group and 0.14 mm (95% CI 0.12-0.17) in the MODULAR-FM group (p < 0.01). Total translation at 60 months was mean 0.30 mm (95% CI 0.10-0.51) less (p < 0.01) for MONO-TM compared with MODULAR-FM tibial components. The majority of tibial components were stable (<0.2 mm MTPM) from 12 to 24-month and 24 to 60-month follow-up.

CONCLUSION

At mid-term follow-up, monobloc PE inlay wear was approximately 40% of that of the modular PE inlay wear, which suggest that back-side wear of modular PE inlays is a significant contributor of PE wear in hybrid TKA.

Greater Blood Loss in Contemporary Cementless Total Knee Arthroplasty than Cemented Total Knee Arthroplasty despite Tranexamic Acid Use: A Match-Controlled Retrospective Study

The purpose of this retrospective study was to assess whether tranexamic acid (TXA) reduces blood loss in cementless total knee arthroplasty (TKA) comparable to levels observed with cemented fixation. After exclusions from 109 consecutive TKAs, 76 cementless knees were matched to 78 cemented knees of identical implant and surgeon. Blood loss with and without TXA was compared. There was no difference between cohorts in sex, age, body mass index, American Society of Anesthesiologists Physical Status classification, or preoperative hemoglobin (p ≥ 0.119). Use of TXA reduced median drain output by only 205 mL in cementless knees compared to 470 mL in cemented knees (p < 0.001). Median drain output per hour was highest in cementless knees without TXA (39.5 mL) followed by cemented knees without TXA (38.2 mL), cementless knees with TXA (28.5 mL), and cemented knees with TXA (12.7 mL; p < 0.001). Hemoglobin drop and total blood loss did not differ between cohorts regardless of TXA use. Cementless fixation in TKA resulted in greater intra-articular blood loss as measured by drain output, despite the use of TXA. Further research is warranted to examine whether a higher TXA dose, TXA delivery method, or the application of bone wax sealant would mitigate blood loss in cementless TKA, and subsequently whether intra-articular blood accumulation resulting in postoperative hemarthrosis affects recovery, function, and clinical outcomes.

Cementless knee arthroplasty: a review of recent performance

Cementless knee arthroplasty has seen a recent resurgence in popularity due to conceptual advantages, including improved osseointegration providing biological fixation, increased surgical efficiency, and reduced systemic complications associated with cement impaction and wear from cement debris. Increasingly younger and higher demand patients are requiring knee arthroplasty, and as such, there is optimism cementless fixation may improve implant survivorship and functional outcomes.

Compared to cemented implants, the National Joint Registry (NJR) currently reports higher revision rates in cementless total knee arthroplasty (TKA), but lower in unicompartmental knee arthroplasty (UKA). However, recent studies are beginning to show excellent outcomes with cementless implants, particularly with UKA which has shown superior performance to cemented varieties. Cementless TKA has yet to show long-term benefit, and currently performs equivalently to cemented in short- to medium-term cohort studies. However, with novel concepts including 3D-printed coatings, robotic-assisted surgery, radiostereometric analysis, and kinematic or functional knee alignment principles, it is hoped they may help improve the outcomes of cementless TKA in the long-term. In addition, though cementless implant costs remain higher due to novel implant coatings, it is speculated cost-effectiveness can be achieved through greater surgical efficiency and potential reduction in revision costs. There is paucity of level one data on long-term outcomes between fixation methods and the cost-effectiveness of modern cementless knee arthroplasty.

This review explores recent literature on cementless knee arthroplasty, with regards to clinical outcomes, implant survivorship, complications, and cost-effectiveness; providing a concise update to assist clinicians on implant choice.

Cite this article: Bone Jt Open 2021;2(1):48–57.

Midterm Comparison of Tibial Fixation between Posterior Cruciate-Retaining and Substituting Porous Tantalum Total Knee Arthroplasty: Three-Dimensional Computed Tomography Analysis

Porous tantalum tibial component is durable with excellent bone ingrowth, higher knee scores, and long-term survivorship. However, to our knowledge, the effect of posterior cruciate-retaining (CR) and posterior cruciate-substituting (PS) porous tantalum tibial component has not been reported. The aim of the current study was to investigate the prosthetic bone quality between CR porous tantalum tibial component and PS using three-dimensional multi-detector-row computed tomography (3D-MDCT). Porous twenty-two (22) CR total knee arthroplasties and 22 PS received 3D-MDCT at every 6 months up to 5.5 years postoperatively to assess prosthetic bone quality (bone marrow contents/tissue volumes [BMC/TV, mg/cm³]) underneath the pegs of porous tantalum modular tibial component. Clinical outcomes (Knee Society score [KSS], Western Ontario and McMaster Universities (WOMAC), FJS-12, Patella score) were evaluated at a minimum follow-up period of 5.5 years. No statistically significant differences were found in age, gender, body mass index, KSS, and BMC/TV volumes in the proximal tibia between the two groups before total knee arthroplasty (TKA). There were also no significant differences between the CR and PS groups with regard to BMC/TV at every 6 months up to 5.5 years after TKA. At 5.5 years postoperatively, there was no significant difference between the two groups in terms of the KSS, WOMAC, forgotten joint score (FJS-12), and Patella score. The present study revealed that the prosthetic bone quality of the CR porous tantalum tibial component and PS were equivalent at every 6 months up to 5.5 years after TKA. This study reflects level II evidence.

The effect of fixation type on the survivorship of contemporary total knee arthroplasty in patients younger than 65 years of age: a register-based study of 115,177 knees in the Nordic Arthroplasty Register Association (NARA) 2000-2016

Background and purpose - Cemented fixation is regarded as the gold standard in total knee arthroplasty (TKA). Among working-age patients, there has been controversy regarding the optimal fixation method in TKA. To address this issue, we conducted a register-based study to assess the survivorship of cemented, uncemented, hybrid, and inverse hybrid TKAs in patients aged < 65 years.Patients and methods - We used the Nordic Arthroplasty Register Association data of 115,177 unconstrained TKAs performed for patients aged < 65 years with primary knee osteoarthritis over 2000-2016. Kaplan-Meier (KM) survival analysis with 95% confidence intervals (CI) and Cox multiple-regression model with adjustment for age, sex, and nation were used to compare fixation methods in relation to revision for any reason.Results - The 10-year KM survivorship of cemented TKAs was 93.6% (95% CI 93.4-93.8), uncemented 91.2% (CI 90.1-92.2), hybrid 93.0% (Cl 92.2-93.8), and inverse hybrid 96.0% (CI 94.1-98.1). In the Cox model, hybrid TKA showed decreased risk of revision after 6 years' follow-up compared with the reference group (cemented) (hazard ratio [HR] 0.5 [CI 0.4-0.8]), while uncemented TKAs showed increased risk of revision both < 1 year (HR 1.4 [1.1-1.7]) and > 6 years' (HR 1.3 [1.0-1.7]) follow-up compared to the reference.Interpretation - Both cemented and hybrid TKAs had 10-year survival rates exceeding 92->93% in patients aged < 65 years. Cemented TKA, however, was used in the vast majority (89%) of the operations in the current study. As it performs reliably in the hands of many, it still deserves the status of gold standard for TKA in working-age patients.

Preoperative Systemic Bone Quality Does Not Affect Tibial Component Migration in Knee Arthroplasty: A 2-Year Radiostereometric Analysis of a Hundred Consecutive Patients

BACKGROUND

Bone quality and other preoperative predictive factors may affect implant migration and the survival of knee arthroplasty.

METHODS

In a prospective cohort of 100 consecutive patients (65 women) at a mean age of 67.7 years (range 39-87 years), we investigated preoperative predictors of postoperative tibial component migration in cemented and cementless total knee arthroplasties or cemented unicompartmental knee arthroplasty. Predictors consisted of Knee Injury and Osteoarthritis Outcome Score (KOOS) and Oxford Knee Score, questionnaires, bone turnover markers of CTX and P1NP, systemic bone mineral density (BMD), and knee osteoarthritis (OA) grade. Tibial component migration was measured with radiostereometry postoperative, at 1 and 2 years of follow-up.

RESULTS

Between 1 and 2 years, 19 tibial components migrated continuously (maximum total point motion [MTPM] > 0.2 mm). In general, there was no difference in age, body mass index, BMD, KOOSs, or OA grade between patients with continuous tibial migration compared to patients without continuous migration (P > .11). However, cementless tibial components with continuous migration had a lower KOOS pain score (more pain), lower vitamin D, and a higher bone turnover (CTX) value than patients without continuous migration. There was no association between the BMD and MTPM at 1-year follow-up regardless of prothesis type (P > .17). Patients with osteoporosis and normal BMD had similar mean tibial component MTPM at 2 years (3 prostheses combined; P = .34).

CONCLUSION

Migration of tibial components inserted with or without bone cement was not affected by the preoperative bone quality in terms of systemic BMD, bone turnover markers, and OA grade in the knee.

Uncemented monoblock trabecular metal posterior stabilized high-flex total knee arthroplasty: similar pattern of migration to the cruciate-retaining design - a prospective radiostereometric analysis (RSA) and clinical evaluation of 40 patients (49 knees) 60 years or younger with 9 years' follow-up

Background and purpose - Uncemented monoblock cruciate retaining (CR) trabecular metal (TM) tibial components in total knee arthroplasty (TKA) work well in the long-term perspective in patients ≤ 60 years. Younger persons expect nearly normal knee flexion after TKA, but CR implants generally achieve less knee flexion compared with posterior stabilized (PS) implants. Cemented PS implants have higher revision rate than CR implants. Can an uncemented monoblock PS TM implant be used safely in younger patients? Patients and methods - 40 patients (49 knees) age ≤ 60 years with primary (20 knees) or posttraumatic osteoarthritis (OA) were operated with a high-flex TKA using an uncemented monoblock PS TM tibial component. Knees were evaluated with radiostereometric analysis (RSA) a mean 3 days (1-5) postoperatively, and thereafter at 6 weeks, 3 months, 1, 2, 5, and 9 years. Clinical outcome was measured with patient-related outcome measures (PROMs). Results - The implants showed a pattern of migration with initial large migration followed by early stabilization lasting up to 9 years, a pattern known to be compatible with good long-term results. Clinical and radiological outcome was excellent with 38 of the 40 patients being satisfied or very satisfied with the procedure and bone apposition to the entire implant surface in 46 of 49 knees. Mean knee flexion was 130°. 1 knee was revised at 3 months due to medial tibial condyle collapse. Interpretation - The uncemented monoblock PS TM implant works well in younger persons operated with TKA due to primary or secondary OA.

Predictive value of short-term migration in determining long-term stable fixation in cemented and cementless total knee arthroplasties

Aims

Early implant migration measured with radiostereometric analysis (RSA) has been proposed as a useful predictor of long-term fixation of tibial components in total knee arthroplasty. Evaluation of actual long-term fixation is of interest for cemented components, as well as for cementless fixation, which may offer long-term advantages once osseointegration has occurred. The objective of this study was to compare the long-term migration with one- and two-year migration to evaluate the predictive ability of short-term migration data and to compare migration and inducible displacement between cemented and cementless (porous metal monoblock) components at least ten years postoperatively.

Patients and Methods

Patients who had participated in RSA migration studies with two-year follow-up were recruited to return for a long-term follow-up, at least ten years from surgery. Two cemented tibial designs from two manufacturers and one porous metal monoblock cementless tibial design were studied. At the long-term follow-up, patients had supine RSA examinations to determine migration and loaded examinations (single leg stance) to determine inducible displacement. In total, 79 patients (54 female) returned, with mean time since surgery of 12 years (10 to 14). There were 58 cemented and 21 cementless tibial components.

Results

Migration at one year and two years was significantly correlated with long-term migration (p < 0.001). Median migration at the long-term follow-up was 0.6 mm (maximum total point motion; interquartile range (IQR) 0.4 to 0.9) for the cemented group and 0.6 mm (IQR 0.3 to 1.1) for the cementless group with no difference between groups (p = 0.99). Inducible displacement was significantly lower for the cementless components (p < 0.001).

Conclusion

Long-term migration was strongly correlated with two-year migration. Although long-term migration was not different for cemented or cementless tibial components, inducible displacement at the long-term visit was significantly lower for these cementless components, suggesting superior fixation. These findings support the predictive value of short-term migration in determining long-term fixation. Cite this article: Bone Joint J 2019;101-B(7 Supple C):55–60

To Cement or Not? Five-Year Results of a Prospective, Randomized Study Comparing Cemented vs Cementless Total Knee Arthroplasty

BACKGROUND

The optimal mode of fixation in total knee arthroplasty is a continuing subject of debate.

METHODS

Previously, we reported 2-year results for this prospective, randomized trial. Knee Society Scores, Oxford scores, and pain visual analog scales were collected pre-operatively and post-operatively. Minimum 5-year follow-up has been obtained with radiographic analysis for 85 patients.

RESULTS

Mean Knee Society Scores and Oxford scores and patient-reported outcomes were similar in both groups. Each group had 1 additional revision, but neither was related to implant fixation. Survivorship with revision as an endpoint was equivalent (95.9% and 95.3%, P = .98). There was no significant difference in radiolucencies observed between groups (P = .10), all were non-progressive.

CONCLUSION

Cementless and cemented total knee arthroplasty had equivalent patient-reported outcomes and survivorship at midterm follow-up. Updates are planned at 10 and 15-year intervals to observe long-term modes of failure between these 2 methods of fixation.

Equivalent 2-year stabilization of uncemented tibial component migration despite higher early migration compared with cemented fixation: an RSA study on 360 total knee arthroplasties

Background and purpose - Thresholds of implant migration for predicting long-term successful fixation of tibial components in total knee arthroplasty have not separated cemented and uncemented fixation. We compared implant migration of cemented and uncemented components at 1 year and as the change in migration from 1 to 2 years. Patients and methods - Implant migration of 360 tibial components measured using radiostereometric analysis was compared at 1 year and as the change in migration from 1 to 2 years in 222 cemented components (3 implant designs) and 138 uncemented components (5 implant designs). Results - 1-year maximum total point motion was lower for the cemented tibial components compared with the uncemented components (median = 0.31 mm [0.03-2.98] versus 0.63 mm [0.11-5.19] respectively, p < 0.001, mixed model). The change in migration from 1 to 2 years, however, was equivalent for cemented and uncemented components (mean [SD] 0.06 mm [0.19] and 0.07 mm [0.27] mm respectively, p = 0.6, mixed model). Interpretation - These findings suggest that current thresholds of acceptable migration at 1 year may be better optimized by considering cemented and uncemented tibial components separately as higher early migration of uncemented components was not associated with decreased stability from 1 to 2 years.

Uncemented or cemented femoral components work equally well in total knee arthroplasty

PURPOSE

To study the pattern of migration and clinical results up to 10 years of uncemented versus cemented fixation of the femoral component in total knee arthroplasty.

METHODS

Randomized controlled trial was conducted of 41 patients (23 women, 18 men) under the age of 60 years using radiostereometric analysis.

RESULTS

About two-thirds of the cemented implants and half of the uncemented implants stabilized between 2 and 10 years, while the remainder displayed a small annual increase of maximum total point motion of 0.09-0.10 mm/year. At 10 years there were no statistically significant differences in migration or clinical results between the groups.

CONCLUSION

Uncemented fixation with titanium fiber mesh coating of the femoral component in total knee arthroplasty works equally as well as cemented fixation up to 10 years. An annual migration of 0.1 mm seems compatible with excellent long-term performance.

LEVEL OF EVIDENCE

I.

Peri-apatite coating decreases uncemented tibial component migration: long-term RSA results of a randomized controlled trial and limitations of short-term results

Background and purpose - Biological fixation of uncemented knee prostheses can be improved by applying hydroxyapatite coating around the porous surface via a solution deposition technique called Peri-Apatite (PA). The 2-year results of a randomized controlled trial, evaluating the effect of PA, revealed several components with continuous migration in the second postoperative year, particularly in the uncoated group. To evaluate whether absence of early stabilization is diagnostic of loosening, we now present long-term follow-up results. Patients and methods - 60 patients were randomized to PA-coated or uncoated (porous only) total knee arthroplasty of which 58 were evaluated with radiostereometric analysis (RSA) performed at baseline, at 3 months postoperatively and at 1, 2, 5, 7, and 10 years. A linear mixed-effects model was used to analyze the repeated measurements. Results - PA-coated components had a statistically significantly lower mean migration at 10 years of 0.94 mm (95% CI 0.72-1.2) compared with the uncoated group showing a mean migration of 1.72 mm (95% CI 1.4-2.1). Continuous migration in the second postoperative year was seen in 7 uncoated components and in 1 PA-coated component. All of these implants stabilized after 2 years except for 2 uncoated components. Interpretation - Peri-apatite enhances stabilization of uncemented components. The number of components that stabilized after 2 years emphasizes the importance of longer follow-up to determine full stabilization and risk of loosening in uncemented components with biphasic migration profiles.

RSA migration of total knee replacements

Purpose - We performed a systematic review and meta-analyses to evaluate the early and long-term migration patterns of tibial components of TKR of all known RSA studies. Methods - Migration pattern was defined as at least 2 postoperative RSA follow-up moments. Maximal total point motion (MTPM) at 6 weeks, 3 months, 6 months, 1 year, 2 years, 5 years, and 10 years were considered. Results - The literature search yielded 1,167 hits of which 53 studies were included, comprising 111 study groups and 2,470 knees. The majority of the early migration occurred in the first 6 months postoperatively followed by a period of stability, i.e., no or very little migration. Cemented and uncemented tibial components had different migration patterns. For cemented tibial components there was no difference in migration between all-poly and metal-backed components, between mobile bearing and fixed bearing, between cruciate retaining and posterior stabilized. Furthermore, no difference existed between TKR measured with model-based RSA or marker-based RSA methods. For uncemented TKR there was some variation in migration with the highest migration for uncoated TKR. Interpretation - The results from this meta-analysis on RSA migration of TKR are in line with both the survival analyses results from joint registries of these TKRs as well as revision rates results from meta-analyses, thus providing further proof for the association between early migration and late revision for loosening. The pooled migration patterns can be used both as benchmarks and for defining migration thresholds for future evaluation of new TKR.

Routine Use of Radiostereometric Analysis in Elective Hip and Knee Arthroplasty Patients: Surgical Impact, Safety, and Bead Stability

BACKGROUND

Radiostereometric analysis (RSA) accurately assesses arthroplasty implant performance and is routinely used for research purposes. Because of its efficacy in detecting implant failure in research subjects, we deployed the use of RSA beads for routine surveillance in all elective total hip and total knee arthroplasty patients.

METHODS

We retrospectively compared 143 patients who received RSA beads intraoperatively with 343 patients who did not receive RSA beads. Using RSA images, we assessed bead stability at 6 weeks and 1 year postoperatively.

RESULTS

There were no intraoperative complications in the RSA group and two in the control group. No differences were found between groups for the surgical time and the expected blood loss. At 6 weeks, 99.5% of beads were considered to be stable, with stability increasing to 99.7% of beads at 1 year.

CONCLUSION

The routine use of RSA bead insertion is a safe procedure and may provide the ability to assess implant fixation in clinical practice.

No difference in implant survivorship and clinical outcomes between full-cementless and full-cemented fixation in primary total knee arthroplasty: A systematic review and meta-analysis

BACKGROUND

The debate over the use of cemented or cementless fixation in total knee arthroplasty (TKA) has never stopped since cementless fixation was introduced. We undertook a systematic review and meta-analysis to evaluate the optimal mode of fixation (full-cementless vs. full-cemented) in TKA.

METHODS

PubMed, Embase, and the Cochrane Library databases up to July 2017 were searched to identify randomised controlled trials (RCTs) and quasi-RCTs comparing full-cementless TKA and full-cemented TKA. The primary outcome was implant survivorship. Secondary outcomes included radiological outcomes (maximum total point-motion [MTPM], radiolucent line, rotation degree) and clinical outcomes (Western Ontario and McMaster Universities Osteoarthritis Index [WOMAC] score, Knee Society Score [KSS] score, postoperative range of movement, blood loss and complications).

RESULTS

Seven studies were included in the systematic review and meta-analysis. The mean follow-up was 7.1 years (range from 2 to 16.6 years). There was no difference in implant survivorship (RR, 0.98; 95% CI, 0.95-1.01; p = 0.25; I² = 0%), MTPM (weighted mean difference [WMD], 0.13 mm; 95% CI, -0.69-0.95; p = 0.75; I² = 89.3%) and radiolucent line (RR, 1.36; 95% CI, 0.57-3.23; p = 0.48; I² = 54%) between the cementless and cemented methods. There was a mean 0.22° more rotation in the full-cementless fixation group (95% CI, 0.13-0.32; p < 0.01; I² = 28.5%). There were no significant differences relating to clinical outcomes (WOMAC score, KSS score, postoperative range of movement, blood loss and complications) between the two fixation groups.

CONCLUSIONS

Although more overall component rotation is found in full-cementless fixation, the implant survivorship and clinical efficacy are likely similar between full-cementless and full-cemented fixation. However, future RCTs with similar cementless prosthetic coating and longer-term follow-up are still needed to confirm our findings.

The effect of personalized versus standard patient protocols for radiostereometric analysis (RSA)

INTRODUCTION

Increasing pressure in the clinic requires a more standardized approach to radiostereometric analysis (RSA) imaging. The aim of this study was to investigate whether implementation of personalized RSA patient protocols could increase image quality and decrease examination time and the number of exposure repetitions.

METHODS

Forty patients undergoing primary total hip arthroplasty were equally randomized to either a case or a control group. Radiographers in the case group were assisted by personalized patient protocols containing information about each patient's post-operative RSA imaging. Radiographers in the control group used a standard RSA protocol.

RESULTS

At three months, radiographers in the case group significantly reduced (p < 0.001) the number of exposures by 1.6, examination time with 19.2 min, and distance between centrum of prosthesis and centrum of calibration field with 34.1 mm when compared to post-operative (baseline) results. At twelve months, the case group significantly reduced (p < 0.001) number of exposures by two, examination time with 22.5 min, and centrum of prosthesis to centrum of calibration field distance with 43.1 mm when compared to baseline results. No significant improvements were found in the control group at any time point.

CONCLUSION

There is strong evidence that personalized RSA patient protocols have a positive effect on image quality and radiation dose savings. Implementation of personal patient protocols as a RSA standard will contribute to the reduction of examination time, thus ensuring a cost benefit for department and patient safety.

Fixation and clinical outcome of uncemented peri-apatite-coated versus cemented total knee arthroplasty

Aims

The optimal method of tibial component fixation remains uncertain in total knee arthroplasty (TKA). Hydroxyapatite coatings have been applied to improve bone ingrowth in uncemented designs, but may only coat the directly accessible surface. As peri-apatite (PA) is solution deposited, this may increase the coverage of the implant surface and thereby fixation. We assessed the tibial component fixation of uncemented PA-coated TKAs versus cemented TKAs.

Patients and Methods

Patients were randomised to PA-coated or cemented TKAs. In 60 patients (30 in each group), radiostereometric analysis of tibial component migration was evaluated as the primary outcome at baseline, three months post-operatively and at one, two and five years. A linear mixed-effects model was used to analyse the repeated measurements.

Results

After five years of follow-up, one (cemented) component was revised due to ligament instability. Overall, uncemented PA-coated tibial components migrated significantly more (p = 0.003), with the mean maximum total point motion (MTPM) at five years being 0.62 mm (95% confidence intervals (CI) 0.49 to 0.76) for cemented tibial components and 0.97 mm (95% CI 0.81 to 1.15) for PA-coated tibial components in TKA. However, between three months and five years the cemented TKAs migrated significantly more (p = 0.02), displaying a MTPM of 0.27 mm (95% CI, 0.19 to 0.36) versus 0.13 mm (95% CI, 0.01 to 0.25) for PA-coated tibial components. One implant in each group was considered at risk for aseptic loosening due to continuous migration after five years of follow-up, albeit with different migration patterns for each group (i.e. higher initial migration but diminishing over time for the PA-coated component versus gradually increasing migration for the cemented component).

Conclusion

The tibial components of PA-coated TKAs showed more overall migration compared with the tibial components of cemented TKAs. However, post hoc analysis showed that this difference was caused by higher migration of PA-coated components in the first three months, after which a stable migration pattern was observed. Clinically, there was no significant difference in outcome between the groups. Cite this article: Bone Joint J 2017;99-B:1467–76.

Cementless knee arthroplasty

Total knee replacement is a common treatment for advanced knee osteoarthritis. The most common and widespread method is cemented arthroplasty. As in the prosthetic hip a gradual transition from cemented to uncemented fixation techniques occurred over time, increasing interest is growing also around cementless knee fixation, with the theoretical advantages of preserving the bone stock and obtaining a biological fixation avoiding cement fragmentation. On the basis of the actual knowledge, the uncemented knee prosthesis represents an interesting alternative especially for the patient under 65 years of age, with viable bone quality, in which a biological bone-prosthesis fixation is desirable, while avoiding the drawbacks of cement fragmentation and of the possible future revision of a cemented implant. However the weak link remains the tibial fixation, so that technical tips are important to avoid micromovements with subsequent lack of osteointegration. In our experience, gap balancing, mobile bearings and no haemostatic tourniquet well combine with this kind of implant.

Low Preoperative BMD Is Related to High Migration of Tibia Components in Uncemented TKA-92 Patients in a Combined DEXA and RSA Study With 2-Year Follow-Up

BACKGROUND

The fixation of uncemented tibia components in total knee arthroplasty may rely on the bone quality of the tibia; however, no previous studies have shown convincing objective proof of this. Component migration is relevant as it has been shown to predict aseptic loosening.

METHODS

We performed 2-year follow-up of 92 patients who underwent total knee arthroplasty surgery with an uncemented tibia component. Bone mineral density (BMD; g/cm²) of the tibia host bone was measured preoperatively using dual energy X-ray absorptiometry. The proximal tibia was divided into 2 regions of interest (ROI) in the part of the tibia bone where the components were implanted. Radiostereometric analysis was performed postoperatively and after 3, 6, 12, and 24 months. The primary outcome was maximum total point motion (MTPM; mm). Regression analysis was performed to evaluate the relation between preoperative BMD and MTPM.

RESULTS

We found low preoperative BMD in ROI1 to be significantly related to high MTPM at all follow-ups: after 3 months (R² = 20%, P_BMD = 0.017), 6 months (R² = 29%, P_BMD = 0.003), 12 months (R² = 33%, P_BMD = 0.001), and 24 months (R² = 27%, P_BMD = 0.001). We also found a significant relation for low BMD in ROI2 and high MTPM: 3 months (R² = 19%, P_BMD = 0.042), 6 months (R² = 28%, P_BMD = 0.04), 12 months (R² = 32%, P_BMD = 0.004), and 24 months (R² = 24%, P_BMD = 0.005).

CONCLUSION

Low preoperative BMD in the tibia is related to high MTPM. Thus, high migration of uncemented tibia components is to be expected in patients with poor bone quality.

Long-term results of a porous tantalum monoblock tibia component: clinical and radiographic results at follow-up of 10 years

Background

The purpose of this study is to assess the long-term follow-up of cementless total knee arthroplasty with the trabecular metal (TM) monoblock tibial component at an average 10-year follow-up. This report is an extension of our previously reported series of 108 TM tibias reported in 2011 (Unger and Duggan, 2011).

Methods

Fifty-eight of the original 108 knees were available for review. Each follow-up patient was evaluated by radiologic and clinical Knee Society Scores. The average follow-up was 10.2 years.

Results

Our results indicate excellent long-term survivorship (96.5%) with 2 confirmed tibia revisions, and 1 femoral revision for periprosthetic fracture and 1 patella open reduction internal fixation. X-ray evaluation demonstrated one patient with 1 mm medial polyethylene wear and a nonprogressive 1 mm of radiolucency on the medial side. All the other tibial components showed full bone apposition and incorporation. Knee Society Scores were excellent in all the patients seen on follow-up.

Conclusions

Long-term follow-up of TM monoblock tibia components confirm excellent survivorship and biologic implant fixation, with excellent outcomes and knee scores.

Cementless Porous Tantalum Monoblock Tibia vs Cemented Modular Tibia in Primary Total Knee Arthroplasty: A Meta-Analysis

BACKGROUND

With the introduction of new fixation systems and designs, there has been a recent reemergence of interest in cementless fixation of the tibial component in total knee arthroplasty. However, little is known regarding the clinical features and survivorship of the cementless porous tantalum monoblock tibial component compared to the conventional cemented modular tibial component.

METHODS

We conducted a literature search of multiple databases for comparative studies published before June 2015 that investigated the outcomes of cementless porous tantalum monoblock tibia vs conventional cemented modular tibia. A pooled analysis was performed. The outcomes of interest were postoperative functional score, range of motion, Western Ontario and McMaster University Osteoarthritis Index, total complications, reoperation, radiolucent lines, loosening of the tibial component, and length of operation.

RESULTS

Six studies involving 977 patients were eligible for the meta-analysis. The use of a cementless porous tantalum monoblock tibial component may associate with a slightly higher functional score, fewer radiolucent lines, and shorter operation. No significant difference was seen in regard to the range of motion, Western Ontario and McMaster University Osteoarthritis Index, total complications, reoperation, and loosening of the component between the 2 groups.

CONCLUSION

However, due to variation among the included studies, the use of cementless porous tantalum monoblock tibia seems to achieve no substantial superiority over that of the conventional cemented modular tibia at 5-year follow-up. Data concerning the long-term prognosis of this novel implant should continue to be collected and analyzed.

Cementless knee arthroplasty

Total knee replacement is a common treatment for advanced knee osteoarthritis. The most common and widespread method is cemented arthroplasty. As in the prosthetic hip a gradual transition from cemented to uncemented fixation techniques occurred over time, increasing interest is growing also around cementless knee fixation, with the theoretical advantages of preserving the bone stock and obtaining a biological fixation avoiding cement fragmentation. On the basis of the actual knowledge, the uncemented knee prosthesis represents an interesting alternative especially for the patient under 65 years of age, with viable bone quality, in which a biological bone-prosthesis fixation is desirable, while avoiding the drawbacks of cement fragmentation and of the possible future revision of a cemented implant. However the weak link remains the tibial fixation, so that technical tips are important to avoid micromovements with subsequent lack of osteointegration. In our experience, gap balancing, mobile bearings and no haemostatic tourniquet well combine with this kind of implant.

Comparison of a novel porous titanium construct (Regenerex®) to a well proven porous coated tibial surface in cementless total knee arthroplasty - A prospective randomized RSA study with two-year follow-up

BACKGROUND

Regenerex is a novel porous titanium construct with a three-dimensional porous structure and biomechanical characteristics close to that of normal trabecular bone. The aim of this study was to compare this novel construct to a well-proven porous plasma sprayed tibial (PPS) implant after total knee arthroplasty.

METHODS

Sixty-one patients scheduled for an uncemented TKA were randomized to receive either a novel highly porous titanium construct Regenerex or the PPS tibial component. Radiostereometric analysis of the tibial components was performed postoperatively and at three, six, 12, and 24months with measurements of migration (segment motion and maximum total point motion (MTPM)).

RESULTS

Knee and function scores improved significantly from preoperatively to two-year follow-up. For both the Regenerex and the PPS the majority of migration appeared during the first three months and then stabilized. No statistically significant differences in MTPM were found in any follow-up between three and 24months. The Regenerex group had a lower migration rate between 12 and 24months compared with the PPS implants (p=0.03) but the PPS group had an initial significantly lower subsidence (p=0.04).

CONCLUSION

In conclusion the Regenerex implant could prove an effective scaffold material for coating of uncemented implants but did no better than the PPS component at 24months of follow-up. ClinicalTrials.gov identifier: NCT01936415.

Monoblock versus modular polyethylene insert in uncemented total knee arthroplasty

Background and purpose - Backside wear of the polyethylene insert in total knee arthroplasty (TKA) can produce clinically significant levels of polyethylene debris, which can lead to loosening of the tibial component. Loosening due to polyethylene debris could theoretically be reduced in tibial components of monoblock polyethylene design, as there is no backside wear. We investigated the effect of 2 different tibial component designs, monoblock and modular polyethylene, on migration of the tibial component in uncemented TKA. Patients and methods - In this randomized study, 53 patients (mean age 61 years), 32 in the monoblock group and 33 in the modular group, were followed for 2 years. Radiostereometric analysis (RSA) was done postoperatively after weight bearing and after 3, 6, 12, and 24 months. The primary endpoint of the study was comparison of the tibial component migration (expressed as maximum total point motion (MTPM)) of the 2 different implant designs. Results - We did not find any statistically significant difference in MTPM between the groups at 3 months (p = 0.2) or at 6 months (p = 0.1), but at 12 and 24 months of follow-up there was a significant difference in MTPM of 0.36 mm (p = 0.02) and 0.42 mm (p = 0.02) between groups, with the highest amount of migration (1.0 mm) in the modular group. The difference in continuous migration (MTPM from 12 and 24 months) between the groups was 0.096 mm (p = 0.5), and when comparing MTPM from 3-24 months, the difference between the groups was 0.23 mm (p = 0.07). Interpretation - In both study groups, we found the early migration pattern expected, with a relatively high initial amount of migration from operation to 3 months of follow-up, followed by stabilization of the implant with little migration thereafter. However, the modular implants had a statistically significantly higher degree of migration compared to the monoblock. We believe that the greater stiffness of the modular implants was the main reason for the difference in migration, but an initial creep in the polyethylene metal-back locking mechanism of the modular group could also be a possible explanation for the observed difference in migration between the 2 study groups.

Trabecular metal tibial knee component still stable at 10 years

Background and purpose - Total knee replacement (TKR) in younger patients using cemented components has shown inferior results, mainly due to aseptic loosening. Excellent clinical results have been reported with components made of trabecular metal (TM). In a previous report, we have shown stabilization of the TM tibial implants for up to 5 years. In this study, we compared the clinical and RSA results of these uncemented implants with those of cemented implants. Patients and methods - 41 patients (47 knees) aged ≤ 60 years underwent TKR. 22 patients (26 knees) received an uncemented monoblock cruciate-retaining (CR) tibial component (TM) and 19 patients (21 knees) received a cemented NexGen Option CR tibial component. Follow-up examination was done at 10 years, and 16 patients (19 knees) with TM tibial components and 17 patients (18 knees) with cemented tibial components remained for analysis. Results - 1 of 19 TM implants was revised for infection, 2 of 18 cemented components were revised for knee instability, and no revisions were done for loosening. Both types of tibial components migrated in the first 3 months, the TM group to a greater extent than the cemented group. After 3 months, both groups were stable during the next 10 years. Interpretation - The patterns of migration for uncemented TM implants and cemented tibial implants over the first 10 years indicate that they have a good long-term prognosis regarding fixation.

Initial stability of a new cementless fixation method of a tibial component with polyaxial locking screws: a biomechanical in vitro examination

INTRODUCTION

Cementless fixation of the tibial component is critical as reduced initial stability leads to implant failure. In this experimental in vitro study, a new fixation method of the tibial component using polyaxial locking screws is evaluated using Roentgen stereophotogrammetric analysis (RSA).

MATERIALS AND METHODS

A special prototype of a tibial component with four polyaxial locking screws was tested on 10 fresh-frozen human tibia specimens. The components were tested with an axial load of 2000 N for 10,000 cycles. Radiographs in two views were performed before loading, after 1000 and after 10,000 cycles, respectively. Besides rotation and translation along the x-, y-, and z-axes, endpoints for RSA were maximum subsidence (MaxSub), maximum lift off (MaxLiftOff) and maximum total point motion (MTPM).

RESULTS

MaxSub increased from -0.5 mm (SD = 0.2) after 1000 cycles to -0.9 mm (SD = 1.1). MaxLiftOff was 0.1 mm after 1000 cycles and did not increase after 10,000 cycles. The MTPM was 0.7 mm (SD = 0.3) after 1000 cycles and 1.1 mm (SD = 1.1) after 10,000 cycles. Two out of nine implants showed an MTPM ≥ 1.0 mm after 10,000 cycles.

CONCLUSIONS

Polyaxial locking screws can potentially improve the initial stability of tibial components. The results of this study indicate that the use of such screws in total knee arthroplasty may be of interest in the future. Further experimental and clinical investigation is needed.

Cementless total knee arthroplasty

As the number of younger and more active patients treated with total knee arthroplasty (TKA) continues to increase, consideration of better fixation as a means of improving implant longevity is required. Cemented TKA remains the reference standard with the largest body of evidence and the longest follow-up to support its use. However, cementless TKA, may offer the opportunity of a more bone-sparing procedure with long lasting biological fixation to the bone. We undertook a review of the literature examining advances of cementless TKA and the reported results.

Cite this article: Bone Joint J 2016;98-B:867–73.

Migration of a cemented fixed-bearing, polished titanium tibial baseplate (Genesis II) at ten years : a radiostereometric analysis

AIMS

The purpose of the present study was to examine the long-term fixation of a cemented fixed-bearing polished titanium tibial baseplate (Genesis ll).

PATIENTS AND METHODS

Patients enrolled in a previous two-year prospective trial (n = 35) were recalled at ten years. Available patients (n = 15) underwent radiostereometric analysis (RSA) imaging in a supine position using a conventional RSA protocol. Migration of the tibial component in all planes was compared between initial and ten-year follow-up. Outcome scores including the Knee Society Score, Western Ontario and McMaster Universities Arthritis Index, 12-item Short Form Health Survey, Forgotten Joint Score, and University of California, Los Angeles Activity Score were recorded.

RESULTS

At ten years, the mean migration of the tibial component was less than 0.1 mm and 0.1° in all planes relative to the post-operative RSA exam. Maximum total point movement increased with time (p = 0.002) from 0.23 mm (sd 0.18) at six weeks to 0.42 mm (sd 0.20) at ten years.

CONCLUSION

The low level of tibial baseplate migration found in the present study correlates to the low rate of revision for this implant as reported in individual studies and in joint replacement registries.

TAKE HOME MESSAGE

Overall, the implant was found to be well fixed at ten years, supporting its continued clinical use and the predictive power of RSA for determining long-term fixation of implants. Cite this article: Bone Joint J 2016;98-B:616-21.

Total shoulder arthroplasty using trabecular metal augments to address glenoid retroversion: the preliminary result of 10 patients with minimum 2-year follow-up

BACKGROUND

Options to address glenoid retroversion include eccentric reaming, bone grafting, modifications to component shape, and reverse shoulder arthroplasty. Trabecular metal (TM) augments have been used extensively in the hip and knee to address bone deficiency in arthroplasty as part of a hybrid combination of high-density polyethylene, polymethyl methacrylate, and TM. This study presents the initial results of the use of specifically designed augments in the shoulder to address glenoid retroversion as part of total shoulder arthroplasty (TSA).

MATERIALS

Ten patients (4 women and 6 men; aged 60 to 79 years) with Walch grade B2 or C glenoids have undergone TM glenoid augment insertion as part of a TSA, with a longer than 24-month follow-up. Patients received a 15° or 30° TM wedge to correct excessive glenoid retroversion before the glenoid component was cemented. Outcome analysis was performed preoperatively, at 3, 6, and 12 months, and yearly thereafter.

RESULTS

All patients have been satisfied, and all scores have improved. There have been no complications and no hardware failures or displacement. All glenoid components were implanted to within 10° of neutral glenoid version. Radiographs at 24 months show good incorporation of the TM augment and the glenoid component.

CONCLUSIONS

The TM augments have the advantage of immediate secure fixation, no tendency to collapse, and the ability to correct retroversion of 25° or more. This study confirms the successful short-term outcome of wedge-shaped TM augments to correct glenoid retroversion as part of TSA.

Effects of Reduction Osteotomy on Gap Balancing During Total Knee Arthroplasty for Severe Varus Deformity

This study aimed to assess the effects of down-sizing and lateralizing of the tibial component (reduction osteotomy) on gap balancing in TKA, and the clinical feasibility of an uncemented modular trabecular metal tibial tray in this technique. Reduction osteotomy was performed for 39 knees of 36 patients with knee OA with a mean tibiofemoral angle of 21° varus. In 20 knees, appropriate gap balance was achieved by release of the deep medial collateral ligament alone. Flexion gap imbalance could be reduced by approximately 1.7° and 2.8° for 4-mm osteotomy and 8-mm osteotomy, respectively. Within the first postoperative year, clinically-stable tibial component subsidence was observed in 9 knees, but it was not progressive, and the clinical results were excellent at a mean follow-up of 3.3 years.

Roentgen stereophotogrammetric analysis: an effective tool to predict implant survival after an all-poly unicompartmental knee arthroplasty-a 10 year follow-up study

PURPOSE

The main purpose of the present study was to determine long-term implant fixation of 15 unicompartmental knee arthroplasty (UKAs) with an all-poly tibial component using Roentgen stereophotogrammetric analysis (RSA) at a mean 10-year follow-up. The secondary purpose was to investigate whether the progressive loss of implant's fixation correlates with a reduction in Knee society score (KSS).

METHODS

Fifteen non-consecutive patients with primary knee osteoarthritis received a UKA with an all-poly tibial component were assessed using KSS scores pre-operatively and post-operatively and RSA on day 2 after surgery, then at 3, 6, and 12 months and yearly thereafter. The mean last follow-up was 10 years.

RESULTS

An increase in maximum total point motion (MTPM) values from 6 months to 1 year post-operatively was found respect to post-operative reference. Implants' displacement values were always <2 mm during the first 6 months, and then, two different trends were noticed in revised and non-revised implants. MTPM increase between 1 and 2 years of follow-up in non-revised UKAs was always <0.2 mm, whereas it was >0.2 mm in revised UKAs. A linear and negative correlation with statistical significance was found between MTPM and both clinical and functional KSS scores (p < 0.001).

CONCLUSION

Also in a long-term follow-up evaluation, RSA is an effective tool to predict functional results after an all-poly UKA providing also a relevant predictive value at 1 year follow-up, and this can be very useful for both patients and surgeons.

LEVEL OF EVIDENCE

Diagnostic studies, Level III.

To Cement or Not? Two-Year Results of a Prospective, Randomized Study Comparing Cemented Vs. Cementless Total Knee Arthroplasty (TKA)

The optimal mode of fixation in total knee arthroplasty (TKA) is a subject of debate. We enrolled 100 TKA patients randomized to cemented or cementless fixation. Knee Society Scores (KSS), Oxford scores and pain visual analog scales (VAS) were collected pre-operatively and post-operatively. Two-year follow-up was obtained for 93 patients. The mean VAS trended higher for the cementless group at 4 months (P=0.06). At 2 years, the KSS functional scores, Oxford scores, and self-reported questions for satisfaction, less pain and better function were similar but the cemented group had higher KSS clinical scores (96.4 vs. 92.3, P=0.03). More radiolucencies were seen in cementless knees (P<0.001). The cementless group had one revision for instability and one cemented knee was revised for infection. Cementless TKA showed equivalent survivorship (revision for any reason as the endpoint) compared to cemented TKA at this early follow-up. Close monitoring of radiolucencies is important with continued follow-up.