Synthesis and characterization of electrical conducting chitosan-graft-polyaniline

Trends in sustainable chitosan-based hydrogel technology for circular biomedical engineering: A review

Eco-friendly materials have emerged in biomedical engineering, driving major advances in chitosan-based hydrogels. These hydrogels offer a promising green alternative to conventional polymers due to their non-toxicity, biodegradability, biocompatibility, environmental friendliness, affordability, and easy accessibility. Known for their remarkable properties such as drug encapsulation, delivery capabilities, biosensing, functional scaffolding, and antimicrobial behavior, chitosan hydrogels are at the forefront of biomedical research. This paper explores the fabrication and modification methods of chitosan hydrogels for diverse applications, highlighting their role in advancing climate-neutral healthcare technologies. It reviews significant scientific advancements and trends chitosan hydrogels focusing on cancer diagnosis, drug delivery, and wound care. Additionally, it addresses current challenges and green synthesis practices that support a circular economy, enhancing biomedical sustainability. By providing an in-depth analysis of the latest evidence on climate-neutral management, this review aims to facilitate informed decision-making and foster the development of sustainable strategies leveraging chitosan hydrogel technology. The insights from this comprehensive examination are pivotal for steering future research and applications in sustainable biomedical solutions.

Sustainable Chitosan/Polybenzoxazine Films: Synergistically Improved Thermal, Mechanical, and Antimicrobial Properties

Polybenzoxazines (Pbzs) are considered as an advanced class of thermosetting phenolic resins as they overcome the shortcomings associated with novolac and resole type phenolic resins. Several advantages of these materials include curing without the use of catalysts, release of non-toxic by-products during curing, molecular design flexibility, near-zero shrinkage of the cured materials, low water absorption and so on. In spite of all these advantages, the brittleness of Pbz is a knotty problem that could be solved by blending with other polymers. Chitosan (Ch), has been extensively investigated in this context, but its thermal and mechanical properties rule out its practical applications. The purpose of this work is to fabricate an entirely bio-based Pbz films by blending chitosan with benzoxazine (Bzo), which is synthesized from curcumin and furfuryl amine (curcumin-furfurylamine-based Bzo, C-fu), by making use of a benign Schiff base chemistry. FT-IR and ¹H-NMR spectroscopy were used to confirm the structure of C-fu. The impact of chitosan on benzoxazine polymerization was examined using FT-IR and DSC analyses. Further evidence for synergistic interactions was provided by DSC, SEM, TGA, and tensile testing. By incorporating C-fu into Ch, Ch-grafted-poly(C-fu) films were obtained with enhanced chemical resistance and tensile strength. The bio-based polymer films produced inhibited the growth of Staphylococcus aureus and Escherichia coli, by reversible labile linkages, expanding Ch galleries, and releasing phenolic species, which was 125 times stronger than bare Ch. In addition, synthesized polybenzoxazine films [Ch/Poly(C-fu)] showed significant dose-dependent antibiofilm activity against S. aureus and E. coli as determined by confirmed by confocal laser scanning microscopy (CLSM). This study suggests that bio-based Ch-graft-polymer material provide improved anti-bacterial property and characteristics that may be considered as a possibility in the near future for wound healing and implant applications.

Ultrasound-triggered hydrogel formation through thiol-norbornene reactions

An ultrasound-initiated thiol-norbornene reaction has been applied to fabricate hydrogels, and the ultrasound conditions in determining the properties of hydrogels have been systematically investigated.

Study of the effect of band gap and photoluminescence on biological properties of polyaniline/CdS QD nanocomposites based on natural polymer

In this work, band gap, photoluminescence and biological properties of new bionanocomposites based on polyaniline (PANi)/hydrolyzed pectin (HPEc)/cadmium sulfide (CdS) QD nanoparticles (NPs) were studied. In order to improve the morphology and properties, CdS NPs were modified with epichlorohydrin to obtain the modified CdS (mCdS). The CdS@HPEc-g-PANi and mCdS@HPEc-g-PANi samples were synthesized via heterogeneous chemical polymerization and characterized by FTIR, ¹HNMR, SEM/XRD, EDX/TEM/EDX-mapping and TGA analyses. The objective of this work is the study of physical, optical and cytotoxicity properties of the nanocomposites and comparison between them. The SEM, XRD and TGA images showed that the modification of NPs resulted in homogeneous morphology, increase of crystalline structure and high thermal stability which influenced on physical and biological property. According to UV-DRS analysis, the mCdS@HPEc-g-PANi indicated lower energy gap compared to the CdS@HPEc-g-PANi nancomposite. The presence of conductive polymer and synergy effect between the PANi and CdS caused higher PL intensity in the CdS@HPEc-g-PANi nanocomposite compared to pure CdS. The emission intensity in the mCdS@HPEc-g-PANi nanocomposite was reduced since the organic modifying agent cause reducing emission intensity. The mCdS@HPEc-g-PANi nanocomposite, due to more compatibility of organic agent with cellular walls of biological cells that help to the diffusion of metal CdS NPs into cell tissue indicated more toxicity effect on cell growth.

Synthesis and Characterization of Polyaniline-Chitosan Patches with Enhanced Stability in Physiological Conditions

Electroconductive polymeric patches are being developed in the hope to interface with the electroresponsive tissues. For these constructs, conjugated polymers are considered as conductive components for their electroactive nature. Conversely, the clinical applications of these conductive polymeric patches are limited due to their short operational time, a decrease in their electroactivity occurs with the passage of time. This paper reports on the polymerization of aniline on prefabricated chitosan films on microscopic glass slides in the presence of sodium phytate. The strong chelation among sodium phytate, aniline and chitosan led to the formation of electoconductive polymeric patch. We assume that immobilization of sodium phytate in the polymeric patch helps to prevent electric deterioration, extend its electronic stability and reduce sheet resistance. The patch oxidized after three weeks (21 days) of incubation in phosphate buffer (pH 7.4 as physiological medium). This feasible fabrication technique set the foundation to design electronically stable, conjugated polymer-based patches, by providing a robust system of conduction that could be used with electroactive tissues such as cardiac muscles at the interface.

Synthesis and characterization of a novel chitosan-grafted-polyorthoethylaniline biocomposite and utilization for dye removal from water

Chitosan was grafted with polyorthoethylaniline through oxidative polymerization using ammonium persulfate as oxidant, resulting in the formation of a biocomposite of chitosan-grafted-polyorthoethylaniline (CH-g-POEA). The synthesized biocomposite (CH-g-POEA) was characterized by FTIR, SEM, and TGA. Adsorption of methyl orange (MO) dye by CH-g-POEA was studied, wherein the Langmuir isotherm model with a R2 of 0.9979 and adsorption capacity of 45.7 mg/g was evaluated.

Applications of chitosan (CHI)-reduced graphene oxide (rGO)-polyaniline (PAni) conducting composite electrode for energy generation in glucose biofuel cell

A glassy carbon electrode (GC) immobilized with chitosan (CHI)@reduced graphene (rGO)-polyaniline (PAni)/ferritin (Frt)/glucose oxidase (GOx) bioelectrode was prepared. The prepared electrode was characterized by using cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) techniques. The morphological characterization was made by scanning electron microsopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. This bioelectrode provided a stable current response of 3.5 ± 0.02 mAcm-2 in 20 mM glucose. The coverage of enzyme on 0.07 cm2 area of electrode modified with CHI@rGO-PAni/Frt was calculated to be 3.80 × 10-8 mol cm-2.

Doped Poly(3-hexylthiophene) Coatings onto Chitosan: A Novel Approach for Developing a Bio-Based Flexible Electronic

Conductive and flexible bio-based materials consisting of chitosan films coated with conductive poly(3-hexylthiophene) (P3HT) were prepared. Thermal, optical, mechanical, morphological, wettability, and conductive properties were analyzed. In a very simple and effective method of chitosan film modification, a controlled volume of a P3HT solution was deposited onto a previously formed chitosan film, assisted by the spin coating method. Later, P3HT-coated chitosan films were doped by simple contact with an aqueous solution of HAuCl₄. The use of HAuCl₄ becomes attractive because the reports on the doping process in this type of material using this reagent are still scarce and recent to date. In addition, since this acid is a well-known metal nanoparticle precursor, its use opens new future perspectives for these materials into new applications. The effect of P3HT concentration and doping times on film properties was studied. Attenuated total reflectance spectroscopy and UV-Vis spectroscopy allowed us to demonstrate that the presence of the P3HT coating and its doping induce significant changes in the vibrational modes and optoelectronic properties of samples. Additionally, the images obtained by scanning electron microscopy showed a well-distributed and homogeneous coating on the surface of chitosan films. Measured conductivity values of doped film samples fall in the range from 821.3 to 2017.4 S/m, representing, to the best of our knowledge, the highest values reported in the literature for chitosan/chitin-based materials. Indeed, these values are around or even higher than those obtained for some materials purely consisting of conductive polymers.

Ultrasonic-Assisted Synthesis and Characterization of Chitosan-Graft-Substituted Polyanilines: Promise Bio-Based Nanoparticles for Dye Removal and Bacterial Disinfection

The sonication-mediated oxidative-radical copolymerization using ammonium persulfate in acidic medium provides a new successful avenue to graft Chitosan with three methylaniline derivatives. The synthesized Chitosan-graft-polymethylanilines (CGPMA) were characterized using FTIR, UV-vis diffuse reflectance spectroscopy, XRD, thermogravimetric analysis (TGA), elemental analysis, and transmission electron microscopy (TEM). XRD spectra revealed that CGPMA have a higher crystallinity degree compared to the pristine Chitosan. In addition, a methyl position-dependent crystallinity is noticeable for the grafted copolymers. This could be confirmed from TEM images that reflect structure-affected morphologies of different ordering for the graft spherical nanoparticles. Interestingly, the copolymers prepared under ultrasonic irradiation show a high potency in dye uptake compared to nonsonicated ones. Moreover, an antibacterial preliminary test on the as-prepared materials was accomplished. We have achieved promising results, which encourages us to conduct more studies to process these materials in developing biomedical active composites.

Macroscale Biomolecular Electronics and Ionics

The conduction of ions and electrons over multiple length scales is central to the processes that drive the biological world. The multidisciplinary attempts to elucidate the physics and chemistry of electron, proton, and ion transfer in biological charge transfer have focused primarily on the nano- and microscales. However, recently significant progress has been made on biomolecular materials that can support ion and electron currents over millimeters if not centimeters. Likewise, similar transport phenomena in organic semiconductors and ionics have led to new innovations in a wide variety of applications from energy generation and storage to displays and bioelectronics. Here, the underlying principles of conduction on the macroscale in biomolecular materials are discussed, highlighting recent examples, and particularly the establishment of accurate structure-property relationships to guide rationale material and device design. The technological viability of biomolecular electronics and ionics is also discussed.

Influence of polysiloxane as nanofiller on the surface, optical and thermal properties of guar gum grafted polyaniline matrix

Mesoporous silica containing nanocomposites of in situ polymerised aniline grafted on guar gum (GG), were synthesised by sol-gel technique. Characterization of samples with respect to SEM, TEM, XRD, XPS, FTIR, BET, UV-vis, and PL illustrated the optically active materials with diverse morphologies. Microscopic analysis rendered transitional changes from smooth GG to coated PANI grafts and dense clusters of polysiloxane nanocomposites. FTIR analysis confirmed the interaction of GG-PANI-Si components. XRD diffractograms illustrate tremendous reduction of dominant amorphous phase of GG by grafted HCl doped PANI depicted by characteristic peaks (centred at 2θ=~25° and 2θ=~20.0°) in the partially crystalline and amorphous GG-g-PANI and GG-g-PANI-Si1 nanocomposites. Phase modification through PANI grafting showed specific surface area of GG-g-PANI (7.6m²/g) improving immensely with low polysiloxane contents to ~170.6m²/g in GG-g-PANI-Si1 compared to 25.6m²/g of GG-g-PANI-Si2. The nanocomposites were thermally stable up to ~240°C, each leaving 69% (GG-g-PANI-Si1) and ~77% (GG-g-PANI-Si2) of inorganic residues. Both showed no thermal dedoping, suggesting the good thermal protection offered by polysiloxane layer.

Chromium (VI) ion adsorption by grafted cross-linked chitosan beads in aqueous solution - a mathematical and statistical modeling study

Chitosan outstanding qualities and efficient way of binding metal ions even to near zero concentration is the major reason for special attention. Modification of chitosan allows the polymer to be applied in numerous field of research. Depending on the modification techniques, chitosan possesses increased adsorption capacity. In this study chitosan beads (CS) were formulated from chitosan flakes, the beads were cross-linked with glutaraldehyde and thereafter grafted with ethyldiaminetetraacetic acid. The stability and amine concentration of the beads were determined. The chemical functionalities of the beads were obtained by Fourier transform infrared spectroscopy, X-ray diffraction and thermogravimetric analysis (TGA). However, in the adsorption studies with Cr(VI), the number of runs in the experiment was obtained by response surface methodology (RSM), and the maximum adsorption capacity (Q_m) from each run was determined from the Langmuir model. The results of the experiment showed that the non-modified beads were soluble at pH 1-4 and insoluble at pH 5, while the modified beads were insoluble at pH 1-6. The amine concentration of CS, CCS and grafted cross-linked chitosan beads (GCCS) were 4.4, 3.8 and 5.0 mmol/g, respectively. The point of zero charge (pH_PZC) of GCCS was found to be 4.4. The quadratic model was significant and adequate in describing the experimental data. The difference between experimental and predicted Q_m was negligible. From the design matrix and results, increased Q_m was achieved at pH 5, contact time 70 min, temperature 45°C, adsorbent dosage 5 g and initial concentration 70 mg/l. The desorption of the beads loaded with Cr(VI) was successful with 0.5 M HCl eluant and contact time of 180 min, leading to cost minimization.

Effect of composites based nickel foam anode in microbial fuel cell using Acetobacter aceti and Gluconobacter roseus as a biocatalysts

This study explores the use of materials such as chitosan (chit), polyaniline (PANI) and titanium carbide (TC) as anode materials for microbial fuel cells. Nickel foam (NF) was used as the base anode substrate. Four different types of anodes (NF, NF/PANI, NF/PANI/TC, NF/PANI/TC/Chit) are thus prepared and used in batch type microbial fuel cells operated with a mixed consortium of Acetobacter aceti and Gluconobacter roseus as the biocatalysts and bad wine as a feedstock. A maximum power density of 18.8Wm(-3) (≈2.3 times higher than NF) was obtained in the case of the anode modified with a composite of PANI/TC/Chit. The MFCs running under a constant external resistance of (50Ω) yielded 14.7% coulombic efficiency with a maximum chemical oxygen demand (COD) removal of 87-93%. The overall results suggest that the catalytic materials embedded in the chitosan matrix show the best performance and have potentials for further development.

Ultrasonic-mediated synthesis and characterization of TiO2-loaded chitosan-grafted-polymethylaniline nanoparticles of potent efficiency in dye uptake and sunlight driven self-cleaning applications

In the present study, a new sequential process for wastewater remediation in two steps with high durability was presented.

Synthesis of chitosan grafted-polyaniline/Co3O4 nanocube nanocomposites and their photocatalytic activity toward methylene blue dye degradation

Co₃O₄ nanocube-doped chitosan-grafted-polyaniline nanocomposites have been successfully synthesised. The synthesised polymeric nanocomposite was stable and exhibits greater photocatalytic activity to degrade MB efficiently within a short duration of time.

Evaluation of a conducting interpenetrating network based on gum ghatti-g-poly(acrylic acid-aniline) as a colon-specific delivery system for amoxicillin trihydrate and paracetamol

Development of colon-specific drug delivery systems for amoxicillin trihydrate and paracetamol using gum ghatti based crosslinked hydrogels.

Chitosan-based nanomaterials: a state-of-the-art review

This manuscript briefly reviews the extensive research as well as new developments on chitosan based nanomaterials for various applications. Chitosan is a biocompatible and biodegradable polymer having immense structural possibilities for chemical and mechanical modification to generate novel properties and functions in different fields especially in the biomedical field. Over the last era, research in functional biomaterials such as chitosan has led to the development of new drug delivery system and superior regenerative medicine, currently one of the most quickly growing fields in the area of health science. Chitosan is known as a biomaterial due to its biocompatibility, biodegradability, and non-toxic properties. These properties clearly point out that chitosan has greater potential for future development in different fields of science namely drug delivery, gene delivery, cell imaging, sensors and also in the treatment as well as diagnosis of some diseases like cancer. Chitosan based nanomaterials have superior physical and chemical properties such as high surface area, porosity, tensile strength, conductivity, photo-luminescent as well as increased mechanical properties as comparison to pure chitosan. This review highlights the recent research on different aspect of chitosan based nanomaterials, including their preparation and application.