Bacteria-instructed synthesis of free radical polymers for highly sensitive detection of Escherichia coli and Staphylococcus aureus

BACKGROUND

Foodborne pathogens such as Escherichia coli and Staphylococcus aureus commonly found in food and water sources are the leading causes of foodborne disease outbreaks, which have become a worldwide issue that can lead to serious health problems and socio-economic losses. Therefore, the development of accurate and timely detection methods for these bacteria is essential to safeguard public health and food safety. However, due to the drawbacks of conventional detection methods such as complex operation, high cost, low specificity and sensitivity, developing efficient and sensitive techniques remains a challenge.

RESULTS

In this study, we developed a fluorescent biosensor based on bacteria-instructed atom transfer radical polymerization (ATRP) for ultrasensitive and specific detection of foodborne pathogenic bacteria. This approach first attaches initiators of ATRP to the surface of carboxylated Fe3O4 magnetic beads via transition metal and subsequently utilizes the distinctive copper-binding redox pathway of bacteria to reduce Cu(II) to Cu(I), which activates the surface-initiated polymerization for in situ growth of fluorescent polymer. This signal amplification strategy significantly enhanced the sensitivity of fluorescence analysis performance. Under optimal conditions, there was a perfect linear correlation between the fluorescence signal intensity and the logarithm of the concentrations of S. aureus and E. coli over the range from 103 CFU/mL to 108 CFU/mL, with the detection limits down to 102 CFU/mL for both.

SIGNIFICANCE

The fluorescent biosensor provides an efficient, sensitive and stable solution for the direct detection of S. aureus/E. coli, confirming the feasibility of the bacterial-instructed ATRP reaction as a signal amplification strategy. This detection method does not require the help of any external stimuli or complex equipment. Moreover, it shows great potential for application in detecting pathogenic bacteria in complex food samples.

A Highly Sensitive Lateral-Flow Strip Using Latex Microspheres to Detect NGAL in Urine Samples

The incidence of kidney disease is increasing worldwide. Rapid and cost-effective approaches for early detection help prevent this disease. Neutrophil gelatinase-associated lipocalin protein (NGAL) is a novel biomarker for acute kidney injury (AKI) and chronic kidney disease (CKD). We aimed to develop a lateral flow strip (LFS) based on a lateral flow immunoassay method (LFIA), using latex microspheres (LMs) as a color labeling to detect NGAL in urine. The performance and potential of the developed LMs-LFS at a point-of-care (POC) testing were evaluated. The results showed that LMs-LFS successfully detected urinary NGAL within 15 min with high specificity without cross-reactivity to or interference from other endogenous substances in urine. The visual limit of detection (vLOD) was 18.75 ng/mL, and the limit of detection (LOD) was 1.65 ng/mL under the optimum condition. The LMs-LFS developed in this study showed a high correlation with the enzyme-linked immunosorbent assay (ELISA) method (R 2 = 0.973, n = 60 urine specimens) for detecting NGAL in urine. The LMs-LFS remained stable for at least six months at room temperature. The LMs-LFS can be a rapid, sensitive, and specific tool for the diagnosis and follow-up of renal disorders at the POC.

An innovative immunochromatographic assay employing Pt-Pd bimetallic nanoparticles as labels for the detection of foot-and-mouth disease virus serotype O

OBJECTIVE

We created a novel, high sensitivity immunochromatographic assay that allows for clear and precise quantitative analysis by employing innovative bimetallic nanoparticles with peroxide-like activity as markers for the preparation of the test strip.

METHODS

Initially, we synthesized Pt-Pd bimetallic nanoparticles through the reduction of K2PtCl4 and Na2PdCl4 using ascorbic acid (AA) in an ultrasonic water bath. These bimetallic nanoparticles were then utilized to label purified antigens from the foot-and-mouth disease virus (FMDV) type O (FMDV-146S), resulting in the creation of antigen-captured nanomarkers. Upon completion of the antigen-antibody reaction, we introduced a color-developing agent (3,3',5,5'-tetramethylbenzidine) for cascade amplification, significantly enhancing detection sensitivity while ensuring clear and accurate quantitative analysis.

RESULTS

The quantitative detection sensitivity achieved was 1:28/test, with a linear range spanning from 1:26 ∼ 1:29 /test. For FMDV type O positive serum, the detection sensitivity reached 96.7 %. Furthermore, this method exhibited a 95 % detection sensitivity for FMDV negative serum, FMDV type A and type AsiaⅠ positive sera, as well as sera positive for other common viral diseases in animals. In comparison to the OIE-recommended LPB-ELISA, this approach displayed higher correlation (correlation coefficient = 0.909). Innovation was at the core of establishing this immunochromatographic assay based on Pt-Pd bimetallic nanoparticles for the detection of FMDV antibodies.

CONCLUSION

The findings revealed a striking 24-fold improvement in sensitivity when compared to colloidal gold, accompanied by a strong correlation coefficient (R2 > 0.9). This suggests a robust and consistent linear association in the results. This method represents a significant advancement in the field of rapid immunochromatographic assays, offering a promising alternative application for bimetallic nanoparticles.

Sensitive fluorescence ELISA with streptavidin scaffolded DNA tetrads for the detection of Escherichia coli O157:H7

Escherichia coli O157:H7 poses a threat to humans. Traditional ELISA is not a sensitive method for the detection of E. coli O157:H7. Here, an efficient method was designed for improving the load capacity of alkaline phosphatase (ALP) with streptavidin scaffolded DNA tetrad (SS-DNAt). With more ALP, more ascorbic acid 2-phosphate was catalyzed to ascorbic acid that was used to synthesize fluorescence poly adenine-thymine-templated copper nanoclusters. Based on SS-DNAt, fluorescence ELISA was successfully proposed for improving the sensitivity for detection of E. coli O157:H7 in milk samples. The method showed a linear range of 104 to 106 cfu/mL. The limit of detection of fluorescence ELISA was 3.75 × 103 cfu/mL and 6.16-fold better than that of traditional ELISA. The recovery of the fluorescence ELISA was 86.7 to 93.6% with the coefficient of variation of 5.6 to 10.5% in milk. This method could be used to detect hazardous material in food.

A protocol to execute a lab-on-chip platform for simultaneous culture and electrochemical detection of bacteria

Here, we present a protocol for a miniaturized microfluidic device that enables quantitative tracking of bacterial growth. We describe steps for fabricating a screen-printed electrode, a laser-induced graphene heater, and a microfluidic device with its integrations. We then detail the electrochemical detection of bacteria using a microfluidic fuel cell. The laser-induced graphene heater provides the temperature for the bacterial culture, and metabolic activity is recognized using a bacterial fuel cell. Please see Srikanth et al.¹ for comprehensive information on the application and execution of this protocol.

Paper-based sensors for bacteria detection

The detection of pathogenic bacteria is essential to prevent and treat infections and to provide food security. Current gold-standard detection techniques, such as culture-based assays and polymerase chain reaction, are time-consuming and require centralized laboratories. Therefore, efforts have focused on developing point-of-care devices that are fast, cheap, portable and do not require specialized training. Paper-based analytical devices meet these criteria and are particularly suitable to deployment in low-resource settings. In this Review, we highlight paper-based analytical devices with substantial point-of-care applicability for bacteria detection and discuss challenges and opportunities for future development.

A review on urinary tract infections diagnostic methods: Laboratory-based and point-of-care approaches

Urinary tract infections (UTIs) are among the most common infectious diseases worldwide. This type of infections can be healthcare-associated or community-acquired and affects millions of people every year. Different diagnostic procedures are available to detect pathogens in urine and they can be divided into two main categories: laboratory-based and point-of-care (POC) detection techniques. Traditional methodologies are often time-consuming, thus, achieving a rapid and accurate identification of pathogens is a challenging feature that has been pursued by many research groups and companies operating in this area. The purpose of this review is to compare and highlight advantages and disadvantages of the traditional and currently most used detection methods, as well as the emerging POC approaches and the relevant advances in on-site detection of pathogens´ mechanisms, suitable to be adapted to UTI diagnosis. Lately, the commercially available UTI self-testing kits and devices are helping in the diagnosis of urinary infections as patients or care givers are able to perform the test, easily and comfortably at home and, upon the result, decide when to attend an appointment/Urgent Health Care Unit.

Rapid Detection and Differentiation of Legionella pneumophila and Non-Legionella pneumophila Species by Using Recombinase Polymerase Amplification Combined With EuNPs-Based Lateral Flow Immunochromatography

Legionella, a waterborne pathogen, is the main cause of Legionnaires’ disease. Therefore, timely and accurate detection and differentiation of Legionella pneumophila and non-Legionella pneumophila species is crucial. In this study, we develop an easy and rapid recombinase polymerase amplification assay combined with EuNPs-based lateral flow immunochromatography (EuNPs-LFIC-RPA) to specifically distinguish Legionella pneumophila and non-Legionella pneumophila. We designed primers based on the mip gene of Legionella pneumophila and the 5S rRNA gene of non-Legionella pneumophila. The recombinase polymerase amplification reaction could go to completion in 10 min at 37°C, and the amplification products could be detected within 5 min with EuNPs-LFIC strips. Using a florescent test strip reader, the quantitative results were achieved by reading the colored signal intensities on the strips. The sensitivity was 1.6 × 10¹ CFU/ml, and a linear standard linear curve plotted from the test strip reader had a correlation coefficient for the determination of Legionella pneumophila (R² = 0.9516). Completed concordance for the presence or absence of Legionella pneumophila by EuNPs-LFIC-RPA and qPCR was 97.32% (κ = 0.79, 95% CI), according to an analysis of practical water samples (n = 112). In short, this work shows the feasibility of EuNPs-LFIC-RPA for efficient and rapid monitoring of Legionella pneumophila and non-Legionella pneumophila in water samples.

Highly sensitive time-resolved fluoroimmunoassay for the quantitative onsite detection of Alternaria longipes in tobacco

AIMS

Alternaria longipes is a causal agent of brown spot of tobacco, which remains a serious threat to tobacco production. Herein, we established a detection method for A. longipes in tobacco samples based on the principle of time-resolved fluoroimmunoassay, in order to fulfil the requirement of rapid, sensitive and accurate detection in situ.

METHODS AND RESULTS

A monoclonal antibody against A. longipes was generated, and its purity and titration were assessed using western blot and ELISA. The size of europium (III) nanospheres was measured to confirm successful antibody conjugation. The method described here can detect A. longipes protein lysates as low as 0.78 ng ml-1 , with recovery rates ranging from 85.96% to 99.67% in spiked tobacco. The specificity was also confirmed using a panel of microorganisms.

CONCLUSIONS

The fluorescent strips allow rapid and sensitive onsite detection of A. longipes in tobacco samples, with high accuracy, specificity, and repeatability.

SIGNIFICANCE AND IMPACT OF THE STUDY

This novel detection method provides convenience of using crude samples without complex procedures, and therefore allows rapid onsite detection by end users and quick responses towards A. longipes, which is critical for disease control and elimination of phytopathogens.

I2/I--mediated fluorescence quenching of an Ag+-doped gold nanocluster-based immunoassay for sensitive detection of Escherichia coli O157:H7 in milk

Escherichia coli O157:H7 is a type of hazardous bacteria in the field of food safety. A sensitive and effective method is urgently needed to detect it, avoiding enormous harm for the human health. In this study, we synthesized stable Ag⁺-doped gold nanoclusters (Ag-AuNC) with a fluorescence intensity 4.8 times stronger than that of AuNC. It was further demonstrated that Ag⁰ existing in the AuNC core and a fraction of Ag⁺ anchored on the AuNC shell eliminated the surface defects and improved the luminescent properties of AuNC. A combination of I₂ and I^- was used to quench fluorescence-enhanced Ag-AuNC, which was first applied in ELISA for detecting E. coli O157:H7 to improve the sensitivity. In the presence of E. coli O157:H7, the biotinylated anti-E. coli O157:H7 mAb and streptavidin-alkaline phosphatase would be immobilized and catalyze l-ascorbic acid 2-phosphate sesquimagnesium salt hydrate to produce ascorbic acid. After addition of KIO₃, I₂/I^- were generated. The I₂ could trigger oxidative etching of Ag-AuNC and I^- could combine with Ag⁺ to decrease the Ag⁺ concentration of Ag-AuNC, which resulted in fluorescence quenching of Ag-AuNC. Under optimal conditions, the linear range of I₂/I^--mediated fluorescence quenching of Ag-AuNC-based immunoassay for detecting E. coli O157:H7 was 3.3 × 10³ to 10⁶ cfu/mL, with a detection limit of 9.2 × 10² cfu/mL, 10.7-fold lower than that of the traditional ELISA. The proposed immunoassay exhibits excellent sensitivity, specificity, recovery, and accuracy, which is useful for quantitative detection of E. coli O157:H7 in food safety.

Real-time recombinase-aided amplification with PMAxx for the rapid detection of viable Escherichia coli O157:H7 in milk

Escherichia coli O157:H7, the causative agent of thrombotic thrombocytopenic purpura and hemolytic uremic syndrome in humans, generates a effective harm to community health because of its high pathogenicity. A real-time recombinase-aided amplification (rRAA) is an emerging method for nucleic acid detection. However, genomic DNA of bacteria could exist in food and the environment for a long time after death and could be amplified by rRAA assay, resulting in false-positive signal; thus, developing a fast and sensitive method is necessary to detect viable foodborne pathogens in food products. In our research, rRAA assay coupled with an enhanced nucleic acid binding dye named improved propidium monoazide (PMAxx) was established and applied in viable E. coli O157:H7 identification in skim milk. The PMAxx could eliminate interference from dead bacteria by permeating impaired membranes and covalently linking to DNA to prevent DNA amplification. The PMAxx-rRAA assay was performed with high sensitivity and good specificity. The PMAxx-rRAA assay could detect as low as 5.4 × 10⁰ cfu/mL of viable E. coli O157:H7 in pure culture, and 7.9 × 10⁰ cfu/mL of viable E. coli O157:H7 in skim milk. In addition, the PMAxx-rRAA assay was performed in the presence of a high concentration of dead bacteria or nontarget bacteria in skim milk to verify the capacity to resist interference from dead bacteria and nontarget bacteria. Therefore, the established PMAxx-rRAA assay is a valuable tool for the identification of viable E. coli O157:H7 in complex food matrix.

A gold nanoparticle based colorimetric sensor for the rapid detection of Yersinia enterocolitica serotype O:8 in food samples

Foodborne diseases from Yersinia enterocolitica serotype O:8 represent global public health problems.

Nanomaterial application in bio/sensors for the detection of infectious diseases

Infectious diseases are a potential risk for public health and the global economy. Fast and accurate detection of the pathogens that cause these infections is important to avoid the transmission of the diseases. Conventional methods for the detection of these microorganisms are time-consuming, costly, and not applicable for on-site monitoring. Biosensors can provide a fast, reliable, and point of care diagnostic. Nanomaterials, due to their outstanding electrical, chemical, and optical features, have become key players in the area of biosensors. This review will cover different nanomaterials that employed in electrochemical, optical, and instrumental biosensors for infectious disease diagnosis and how these contributed to enhancing the sensitivity and rapidity of the various sensing platforms. Examples of nanomaterial synthesis methods as well as a comprehensive description of their properties are explained. Moreover, when available, comparative data, in the presence and absence of the nanomaterials, have been reported to further highlight how the usage of nanomaterials enhances the performances of the sensor.

An Enhanced Lateral Flow Assay Based on Aptamer-Magnetic Separation and Multifold AuNPs for Ultrasensitive Detection of Salmonella Typhimurium in Milk

In this paper, a novel and ultrasensitive lateral flow assay (LFA) based on aptamer-magnetic separation, and multifold Au nanoparticles (AuNPs) was developed for visual detecting Salmonella enterica ser. Typhimurium (S. Typhimurium). The method realized magnetic enrichment and signal transduction via magnetic separation and achieved signal amplification through hybridizing AuNPs-capture probes and AuNPs-amplification probes to form multifold AuNPs. Two different thiolated single-strand DNA (ssDNA) on the AuNPs-capture probe played different roles. One was combined with the AuNPs-amplification probe on the conjugate pad to achieve enhanced signals. The other was connected to transduction ssDNA1 released by aptamer-magnetic capture of S. Typhimurium, and captured by the T-line, forming a positive signal. This method had an excellent linear relationship ranging from 8.6 × 102 CFU/mL to 8.6 × 107 CFU/mL with the limit of detection (LOD) as low as 8.6 × 100 CFU/mL in pure culture. In actual samples, the visual LOD was 4.1 × 102 CFU/mL, which did not carry out nucleic acid amplification and pre-enrichment, increasing three orders of magnitudes than unenhanced assays with single-dose AuNPs and no magnetic separation. Furthermore, the system showed high specificity, having no reaction with other nontarget strains. This visual signal amplificated system would be a potential platform for ultrasensitive monitoring S. Typhimurium in milk samples.

Gold Nanobeads with Enhanced Absorbance for Improved Sensitivity in Competitive Lateral Flow Immunoassays

BACKGROUND

Colloidal gold based lateral flow immunoassay (LFIA) commonly suffers from relatively low detection sensitivity due to the insufficient brightness of conventional gold nanoparticles (AuNPs) with the size of 20-40 nm.

METHODS

Herein, three kinds of gold nanobeads (GNBs) with the size of 94 nm, 129 nm, and 237 nm, were synthesized by encapsulating numerous hydrophobic AuNPs (10 nm) into polymer matrix. The synthesized GNBs exhibited the enhanced colorimetric signal intensity compared with 20-40 nm AuNPs. The effects of the size of GNBs on the sensitivity of LFIA with competitive format were assessed.

RESULTS

The results showed that the LFIA using 129 nm GNBs as amplified signal probes exhibits the best sensitivity for fumonisin B1 (FB1) detection with a cut-off limit (for visual qualitative detection) at 125 ng/mL, a half maximal inhibitory concentration at 11.27 ng/mL, and a detection limit at 1.76 ng/mL for detection of real corn samples, which are 8-, 3.82-, and 2.89-fold better than those of conventional AuNP40-based LFIA, respectively. The developed GNB-LFIA exhibited negligible cross-reactions with other common mycotoxins. In addition, the accuracy, precision, reliability, and practicability were demonstrated by determining real corn samples.

CONCLUSIONS

All in all, the proposed study provides a promising strategy to enhance the sensitivity of competitive LFIA via using the GNBs as amplified signal probes.

A Rapid and Sensitive Europium Nanoparticle-Based Lateral Flow Immunoassay Combined with Recombinase Polymerase Amplification for Simultaneous Detection of Three Food-Borne Pathogens

Food-borne pathogens have become an important public threat to human health. There are many kinds of pathogenic bacteria in food consumed daily. A rapid and sensitive testing method for multiple food-borne pathogens is essential. Europium nanoparticles (EuNPs) are used as fluorescent probes in lateral flow immunoassays (LFIAs) to improve sensitivity. Here, recombinase polymerase amplification (RPA) combined with fluorescent LFIA was established for the simultaneous and quantitative detection of Listeria monocytogenes, Vibrio parahaemolyticus, and Escherichia coliO157:H7. In this work, the entire experimental process could be completed in 20 min at 37 °C. The limits of detection (LODs) of EuNP-based LFIA–RPA were 9.0 colony-forming units (CFU)/mL for Listeria monocytogenes, 7.0 CFU/mL for Vibrio parahaemolyticus, and 4.0 CFU/mL for Escherichia coliO157:H7. No cross-reaction could be observed in 22 bacterial strains. The fluorescent LFIA–RPA assay exhibits high sensitivity and good specificity. Moreover, the average recovery of the three food-borne pathogens spiked in food samples was 90.9–114.2%. The experiments indicate the accuracy and reliability of the multiple fluorescent test strips. Our developed EuNP-based LFIA–RPA assay is a promising analytical tool for the rapid and simultaneous detection of multiple low concentrations of food-borne pathogens.

A novel fluorometric aptasensor based on carbon nanocomposite for sensitive detection of Escherichia coli O157:H7 in milk

Escherichia coli O157:H7 is an extremely serious foodborne pathogen accounting for a vast number of hospitalizations. In this system, a simple, rapid, and safe compound method was developed based on carbonyl iron powder (CIP) and multiwalled carbon nanotubes (MWCNT). Then, the CIP@MWCNT-based aptasensor was constructed by strong π-stacking between nanocomposite and aptamer, single-strand DNA, causing fluorescent quenching of the dye-labeled aptamer. The restoration of dye fluorescence could be achieved when aptamer came off the surface of the CIP@MWCNT nanocomposite due to the presence of target bacteria. To the best of our knowledge, this fabrication of magnetic carbon nanotubes without irritating and corrosive reagents is described for the first time. The sensing platform was also an improvement on the conventional formation of the aptasensor between carbon materials and DNA aptamer. The nanocomposite was verified by diverse characterization of zeta potential, Fourier-transform infrared spectroscopy, transmission electron microscopy, and energy dispersive x-ray analysis. The CIP@MWCNT-based aptasensor was an effective nanoplatform for quantitative detection of E. coli O157:H7, and was measured to have high specificity, good reproducibility, and strong stability. The aptasensor's capacity to quantify E. coli O157:H7 was as low as 7.15 × 10³ cfu/mL in pure culture. The detection limit of E. coli O157:H7 was 3.15 × 10² cfu/mL in contaminated milk after 1 h of pre-incubation. Hence, the developed assay is a new possibility for effective synthesis of nanocomposites and sensitive tests of foodborne pathogens in the dairy industry.

Electricity-free amplification and visual detection of Cronobacter species in powdered infant formula

Due to the lack of electricity and thermostatic instruments in certain settings for convenient detection of Cronobacter species in powdered infant formula (PIF), a novel investigation was conducted to establish an electricity-free visual detection system for rapid detection of Cronobacter species in PIF. This system included a portable electricity-free heater that could use the exothermic reaction of calcium oxide and water and 3 kinds of phase change materials to supply 3 constant temperatures for immunomagnetic separation, DNA extraction, and loop-mediated isothermal amplification assay. Meanwhile, the amplified reaction combined with hydroxynaphthol blue could achieve rapid visual detection. Primers designed based on the 16S-23S ribosomal RNA internal transcribed spacer were used in loop-mediated isothermal amplification to specifically monitor Cronobacter species, and the detection limit can reach 4.2 × 10² cfu/g in PIF by an electricity-free heater in 2 h 30 min. Moreover, 2 h of pre-enrichment was necessary when the level of the PIF samples with Cronobacter spp. was 10⁰ cfu/g. The stability of the system was evaluated in ambient temperature at 4°C, 25°C, and 37°C. The results suggested that the electricity-free heater can maintain 3 constant temperatures to support different processes. Therefore, this amplification and visual system is applicable for use in many fields for rapid and specific detection of Cronobacter species in PIF.

Integrated gold superparticles into lateral flow immunoassays for the rapid and sensitive detection of Escherichia coli O157:H7 in milk

Escherichia coli O157:H7 is a common harmful foodborne pathogen that can cause severe diseases at low infectious doses. Traditional lateral flow immunoassay (LFIA) for the rapid screening of E. coli O157:H7 in food suffers from low sensitivity due to its dependence on 20- to 40-nm gold nanoparticles (AuNP) with insufficient brightness as labels. To address this issue, we reported for the first time the successful synthesis of gold superparticles (GSP) by encapsulating numerous small AuNP into a polymer nanobead using an evaporation-induced self-assembly method. Results indicated that the resultant GSP exhibited remarkably enhanced absorbance compared with the most widely used 40 nm AuNP in LFIA. In addition, the absorbance of GSP could be easily tuned by varying GSP sizes. Under optimized conditions, we achieved a rapid and sensitive determination of E. coli O157:H7 in milk with a detection limit of 5.95 × 10² cfu/mL when using the GSP with a size of 342 nm as LFIA signal reporters, exhibiting improvement of approximately 32-fold relative to the conventional 40 nm AuNP-LFIA method. We further demonstrated the selectivity, accuracy, reliability, and practicality of the proposed GSP-LFIA strip. In summary, this work offers a new strategy for improving LFIA sensitivity using assembled GSP as markers and demonstrates huge potential in rapidly and sensitively detecting foodborne pathogens.

Comparative Study of Time-Resolved Fluorescent Nanobeads, Quantum Dot Nanobeads and Quantum Dots as Labels in Fluorescence Immunochromatography for Detection of Aflatoxin B1 in Grains

Label selection is an essential procedure for improving the sensitivity of fluorescence immunochromatography assays (FICAs). Under optimum conditions, time-resolved fluorescent nanobeads (TRFN), quantum dots nanobeads (QB) and quantum dots (QD)-based immunochromatography assays (TRFN-FICA, QB-FICA and QD-FICA) were systematically and comprehensively compared for the quantitative detection of aflatoxin B₁ (AFB₁) in six grains (corn, soybeans, sorghum, wheat, rice and oat). All three FICAs can be applied as rapid, cost-effective and convenient qualitative tools for onsite screening of AFB₁; TRFN-FICA exhibits the best performance with the least immune reagent consumption, shortest immunoassay duration and lowest limit of detection (LOD). The LODs for TRFN-FICA, QB-FICA and QD-FICA are 0.04, 0.30 and 0.80 μg kg⁻¹ in six grains, respectively. Recoveries range from 83.64% to 125.61% at fortified concentrations of LOD, 2LOD and 4LOD, with the coefficient of variation less than 10.0%. Analysis of 60 field grain samples by three FICAs is in accordance with that of LC-MS/MS, and TRFN-FICA obtained the best fit. In conclusion, TRFN-FICA is more suitable for quantitative detection of AFB₁ in grains when the above factors are taken into consideration.

Lab in a Tube: Point-of-Care Detection of Escherichia coli

Significant levels of infectious diseases caused by pathogenic bacteria are nowadays a worldwide matter, carrying considerable public health care challenges and huge economic concerns. Because of the rapid transmission of these biothreat agents and the outbreak of diseases, a rapid detection of pathogens in early stages is crucial, particularly in low-resources settings. To this aim, we developed for the first time a new sensing approach carried out in a single step for Escherichia coli O157:H7 detection. The detection principle is based on Förster resonance energy transfer using gold nanoclusters as a signal reporter and gold nanoparticles conjugated with antibodies as a quencher. The sensing platform includes an ultraviolet-light-emitting diode to provide the proper excitation and consists of a microtube containing two pieces of fiber glass; one of them is embedded with label-free gold nanoclusters and the other one with gold nanoparticles conjugated with antibodies. Upon the addition of the sample containing bacteria, the florescence of gold nanoclusters is recovered. The assay was evaluated by the naked eye (on/off) and quantitatively with use of a smartphone camera. The biosensor proved to be highly specific and sensitive, achieving a limit of detection as low as 4.0 cfu mL^-1. Additionally, recoveries of 110% and 95% were obtained when the platforms in spiked river and tap water, respectively, were evaluated.

Preparation of an Antidanofloxacin Monoclonal Antibody and Development of Immunoassays for Detecting Danofloxacin in Meat

Danofloxacin (DAF), a third-generation fluroquinolone (FQ), is widely used as a broad-spectrum antibacterial drug to prevent diseases in livestock and poultry. In this study, a highly specific and sensitive monoclonal antibody (mAb) against DAF was prepared. Also, the mAb was used for the indirect competitive enzyme-linked immunosorbent assay (icELISA) and immunochromatographic strip for the detection of DAF residues in meat. The IC₅₀ of the icELISA based on this mAb was 1.39 ng/mL, and the limit of detection was 0.2 ng/mL. According to the cross-reactivity (CR) experiment, the ELISA that we developed was highly specific and had low CR with other FQ analogues. Moreover, the cut-off of the immunochromatographic strip developed for detecting DAF in meat was 5 ng/mL. Overall, the developed ELISA and immunochromatographic strip based on the prepared mAb were proved reliable for the rapid detection of DAF in meat and can be considered as effective screening methods for food safety and quality management.

Ovalbumin antibody-based fluorometric immunochromatographic lateral flow assay using CdSe/ZnS quantum dot beads as label for determination of T-2 toxin

This work describes an anti-ovalbumin antibody-based lateral flow immunoassay (LFI) for T-2 toxin. The antibody uses a coating antigen as a bifunctional element for universality and introduces preincubation to improve the detection limits of the method. T-2 toxin and ovalbumin-modified T-2 toxin competitively binds on the anti-T-2 toxin monoclonal antibody modified on CdSe/ZnS quantum dot beads during preincubation. The modified T-2 toxin acts as a bifunctional element that forms immuno complexes during preincubation and combines with anti-ovalbumin antibody coated in the test line through the ovalbumin terminal. Fluorescence is detected at 610 nm on the test zone following photoexcitation at 365 nm. It has a reverse dose-effect relationship with the amount of T-2 toxin. The calibration plot is linear in the 20-110 fg mL^-1 T-2 toxin concentration range, and the limit of detection (LOD) is 10 fg mL^-1, which is lower by 8-fold than that of the traditional LFI system (LOD 80 fg mL^-1) and one order of magnitude than those of LFIs with labels of colloidal gold nanoparticles (LOD 150 fg mL^-1) or fluorophores (LOD 190 ng mL^-1). Universality was verified through aflatoxin B₁ detection using the established ovalbumin antibody-based LFI system (LOD 10 fg mL^-1). The performance of the method was compared with that of established systems and a commercial ELISA kit (LOD 360 fg mL^-1). Graphical abstractSchematic representation of ovalbumin antibody-based immunochromatographic lateral flow assay for T-2 toxin. Preincubation is introduced for high sensitivity. T-2- anti-ovalbumin acts as a bi-functional element for universality. CdSe/ZnS quantum dot beads act as label. Fluorometric signal is detected at 610 nm.

Functionalized AuMBA @Ag Nanoparticles as an Optical and SERS Dual Probe in a Lateral Flow Strip for the Quantitative Detection of Escherichia coli O157:H7

A method combining surface-enhanced Raman scattering (SERS) with a lateral flow strip (LFS) was developed for the quantitative and sensitive analysis of Escherichia coli O157:H7. Au^MBA @Ag nanoparticles were prepared as SERS probes, and 4-methylthiobenzoic acid (MBA) as a Raman reporter was inserted into the interior gap of the Au@Ag core-shell nanoparticles, which replaced the Au nanoparticles that serve as SERS nanotags in traditional LFS. Using this developed SERS-LFS, the presence of the target bacteria could be tested through the appearance of a red band on the test line. Furthermore, quantitative analysis of E. coli O157:H7 was achieved by measuring the specific Raman intensity of MBA on the test line. The sensitivity of this SERS-LFS biosensor is 5 × 10⁴ CFU/mL of E. coli O157:H7, which is 10-fold higher than that of a naked eye-based colorimetric LFS. This quantitative detection of E. coli O157:H7 ( Y = 1993.86 X - 6812.17, R² = 0.9947) was obtained with a wide linear range (5 × 10⁴ to 5 × 10⁸ ) due to the signal enhancement of the SERS nanotags. In addition, the SERS-LFS could differentiate E. coli O157:H7 from closely related bacterial species or nontarget contaminants, suggesting high specificity of this assay. The applicability of SERS-LFS to the analysis of E. coli O157:H7 in milk, chicken breast, and beef was also validated, indicating that the sensitivity was not disturbed by the food matrix. In summary, the SERS-LFS developed in this study could be a powerful tool for the quantitative and sensitive screening of E. coli O157:H7 in a food matrix. PRACTICAL APPLICATION: This study demonstrates that a surface-enhanced Raman scattering (SERS)-based lateral flow strip (LFS) could be used as a rapid and sensitive method for Escherichia coli O157:H7 detection. Furthermore, this SERS-based LFS could achieve quantitative detection of the target, eliminating the defect of the traditional colloidal gold LFS, which is not quantifiable.

Validity of a single antibody-based lateral flow immunoassay depending on graphene oxide for highly sensitive determination of E. coli O157:H7 in minced beef and river water

Considering the health risks of E. coli O157:H7 presence in food and water, an affordable and highly sensitive detection method is crucial. Herein, we report the first use of a single antibody-based fluorescent lateral flow immunoassay (FLFIA) depending on non-radiative energy transfer between graphene oxide and quantum dots for determination of E. coli O157:H7 in beef and river water. FLFIA showed a high sensitivity rate thousand-fold better than the conventional lateral flow (LF). In inoculated minced beef and river water samples, the limits of detection were 178 and 133 CFU g^-1 or mL^-1, respectively. Besides, it presented a high selectivity in the presence of other possible interfering bacteria. The single antibody approach reduced the assay cost to 60% less than the conventional LF. Alongside, the results could be read by portable LF readers or smartphones. These advantages offer FLFIA as a promising technology for pathogen detection in food and water.

Invited review: Advancements in lateral flow immunoassays for screening hazardous substances in milk and milk powder

Dairy-related food safety outbreaks, such as food-borne pathogen contamination, mycotoxin contamination, and veterinary drug contamination, sometimes happen and have been reported all over the world, affecting human health and, in some cases, leading to death. Thus, rapid yet robust detection methods are needed to monitor milk and milk powder for the presence of hazardous substances. The lateral flow immunoassay (LFI) is widely used in onsite testing because of its rapidity, simplicity, and convenience. In this review, we describe some traditional LFI used to detect hazardous substances in milk and milk powder. Furthermore, we discuss recent advances in LFI that aim to improve sensitivity or detection efficiency. These advances include the use of novel label materials, development of signal amplification systems, design of multiplex detection systems, and the use of nucleic acid-based LFI.

Plasmonic enhancement in lateral flow sensors for improved sensing of E. coli O157:H7

We propose a plasmonic enhanced lateral flow sensor (pLFS) concept with an enhanced colorimetric signal by utilizing liposome encapsulating reagent to trigger the aggregation of gold nanoparticles (GNPs). Our signal enhancement strategy incorporates the simplicity of lateral flow immunoassays (LFIA) utilizing plasmonic enhancement. The conceptualized hybrid pLFS for onsite rapid detection of pathogens in low numbers in a user friendly format requiring simple steps is the first step in the translation of plasmonic enhancement sensing to a practical regime. The pLFS was carried out with a biotinylated liposome label ruptured to release branched polyethylenimine (BPEI) to trigger the aggregation of GNPs for colorimetric signal generation. BPEI has multiple amino groups and more positive charges in PBS buffer, therefore few of the BPEI groups could induce the aggregation of GNPs, resulting in an enhanced colorimetric signal to detect E. coli O157:H7. Compared with the reported conventional LFIA, the proposed pLFS demonstrated more than 1000-fold improvement in sensitivity. The pLFS could detect as low as 100 CFU/ml of E. coli O157:H7 in buffer and 600 CFU/ml E. coli O157:H7 in liquid food systems.

Nanozyme-Mediated Dual Immunoassay Integrated with Smartphone for Use in Simultaneous Detection of Pathogens

Nanozymes are an excellent class of optical reporters for the development of sensitive biosensors for widespread applications. In this study, mesoporous core-shell palladium@platinum (Pd@Pt) nanoparticles were synthesized and then applied as signal amplifier in a dual lateral flow immunoassay (LFIA) and integrated with a smartphone-based device for use in simultaneous detection of Salmonella Enteritidis and Escherichia coli O157:H7. After optimization, the limit of detections were calculated to be ∼20 cfu/mL for S. Enteritidis and ∼34 cfu/mL for E. coli O157:H7, respectively. The greatly improved sensitivity was contributed by the peroxidase-like catalytic activity of the Pd@Pt nanoparticles for signal enhancement and the parallel design of dual detection for eliminating the cross-interference. The estimated recoveries of the dual LFIA range from 91.44 to 117.00%, which indicated that the developed method is capable of detecting live bacteria in food samples. This approach provides an attractive platform for S. Enteritidis and E. coli O157:H7 detection using a smartphone-based device as the sole piece of equipment, indicating great promise for foodborne pathogen analysis or in-field food safety tracking.