The effect of heat treatment on the microstructure and functional properties of whey protein from goat milk

The casein in sheep milk processed by cold plasma technology: Phosphorylation degree, functional properties, oxidation characteristics, and structure

Cold plasma is a nonthermal process used for modification of proteins. The objective of this study was to investigate the effect of cold plasma technology on the phosphorylation degree, functional and oxidation properties, and structure of casein in sheep milk. Cold plasma treatment for 3-4 min significantly increased the phosphorylation degree and enhanced functional properties, including water-holding capacity, solubility, foaming capacity and stability. Besides, plasma treatment time profoundly influenced protein oxidation, and treatment for 2 and 3 min could be the preferred conditions to minimize protein change. The protein conformation became unstable with the extension of treatment time. Particle size, polymer dispersity index, and microscopy images confirmed alterations in the protein structure following 3 min of processing. Consequently, using cold plasma treatment at 10 kHz 20 kV for 3 min could be suggested for milk protein modification, providing a basis for the application of high-quality caseins in food processing.

Camel milk whey powder formulated using thermal (spray-drying process) and non-thermal (ultrasonication) processing methods: Effect on physicochemical, technological, and functional properties

Whey protein concentrates (WPCs) are gaining importance as a functional ingredient due to their high technological and functional properties and their diverse application in the food industry. In this study, Camel milk whey (CW) was separated from skimmed camel milk, then either spray-dried (SD) at 170, 185 and 200 °C, or treated by ultrasonication (US) (20 kHz) for 5, 10 and 15 min followed by freeze-drying to obtain camel milk whey powder (CWP). The structural analysis of CWP was carried out by Fourier-Transform Infrared Spectroscopy (FTIR) and X-Ray Diffraction (XRD) which showed no significant difference in the functional groups profile of US samples compared to control and SD samples. US samples showed some degree of crystallinity that was comparable to the control samples, while SD samples exhibited very low degree of crystallinity. The surface morphology, particle size, and surface charge of CWP were evaluated using scanning electron microscopy (SEM) and Zetasizer. The lowest particle size of 215.1 nm with surface charge of -21.6 mv was observed in SD-185 WPC. Moreover, SD samples revealed whiter color compared to the US-treated samples which were having lower L* values (P < 0.05). US-15 sample exhibited high protein solubility (100 %), whereas the SD-200 sample showed reduced solubility (92.7 %). Improvement in the emulsifying activity of CWP samples was observed after SD and US, with highest emulsifying activity index (EAI) values of 143.75 m2/g and 143.11 m2/g were reported for SD-185 and US-15 CWP samples, respectively. To conclude, SD and US were found to improve the physico-chemical, technological, and functional properties of CWP, and thus can be utilized as a promising strategy to preserve and enhance the technofunctional properties of CWP.

Exploration of dynamic interaction between β-lactoglobulin and casein micelles during UHT milk process

The protein aggregation induced by UHT treatment shortens the shelf life of UHT milk. However, the mechanism of β-Lg induced casein micelle aggregation remains unclear. Herein, the dynamic interaction between β-Lg and casein micelles during UHT processing was investigated by experimental techniques and molecular dynamics simulations. Results showed that β-Lg decreased the stability of casein micelles, increased their size and zeta potential. Raman and FTIR spectra analysis suggested that hydrogen and disulfide bonds facilitated their interaction. Cryo-TEM showed that the formation of the casein micelle/β-Lg complex involved rigid binding, flexible linking, and severe cross-linking aggregation during UHT processing. SAXS and MST demonstrated β-Lg bound to κ-casein on micelle surfaces with a dissociation constant (Kd) of 3.84 ± 1.14 μm. Molecular docking and dynamic simulations identified the interacting amino acid residues and clarified that electrostatic and van der Waals forces drove the interaction. UHT treatment increased hydrogen bonds and decreased total binding energy. The non-covalent binding promoted the formation of disulfide bonds between β-Lg and casein micelles under heat treatment. Ultimately, it was concluded that non-covalent interaction and disulfide bonding resulted in casein micelle/β-Lg aggregates. These findings provided scientific insights into protein aggregation in UHT milk.

The Impact of Varying Lactose-to-Maltodextrin Ratios on the Physicochemical and Structural Characteristics of Pasteurized and Concentrated Skim and Whole Milk-Tea Blends

This study investigates the impact of substituting lactose with maltodextrin in milk-tea formulations to enhance their physicochemical and structural properties. Various lactose-to-maltodextrin ratios (100:0, 90:10, 85:15, 80:20, 75:25) were evaluated in both post-pasteurized and concentrated skim milk-tea (SM-T) and whole milk-tea (WM-T) formulations. Concentration significantly improved the zeta potential, pH, and browning index in both SM-T and WM-T compared to pasteurization. L:M ratios of 90:10 and 75:25 in WM-T and 90:10 and 80:20 in SM-T showed higher phenolic preservation after concentration due to structural changes resulting from the addition of maltodextrin and water removal during prolonged heating. The preservation effect of phenolic components in both WM-T and SM-T is governed by many mechanisms including pH stabilization, zeta potential modulation, protein interactions, complex formation, and encapsulation effects. Therefore, optimizing milk-tea stability and phenolic preservation through L:M ratio adjustments provides a promising approach for enhancing milk-tea properties.

Effect of thermal and non-thermal processing methods on the Structural and Functional Properties of Whey Protein from Donkey Milk

This study evaluated the impact of thermal, ultrasonication, and UV treatment on the structural and functional properties of whey proteins from donkey milk (DWP). Whey proteins exhibited notable stability in non-heat-treated environments, while their structural and functional characteristics were notably impacted by excessive heat treatment. The application of high-temperature long-time thermal treatment (HTLT) resulted in a decrease in fluorescence intensity, foaming and emulsification stability, and considerable damage to the active components of the proteins. Specifically, the preservation of lysozyme activity was only 23%, and lactoferrin and immunoglobulin G exhibited a significant loss of 70% and 77%, respectively. Non-thermal treatment methods showed superior efficacy in preserving the active components in whey proteins compared with heat treatment. Ultrasonic treatment has demonstrated a notable capability in diminishing protein particle size and turbidity, and UV treatment has been observed to have the ability to oxidize internal disulfide bonds within proteins, consequently augmenting the presence of free sulfhydryl groups, which were beneficial to foaming and emulsification stability. This study not only offers a scientific basis for the processing and application of DWP but also serves as a guide to produce dairy products, aiding in the development of dairy products tailored to specific health functions.

Process-Induced Molecular-Level Protein-Carbohydrate-Polyphenol Interactions in Milk-Tea Blends: A Review

The rapid increase in the production of powdered milk-tea blends is driven by a growing awareness of the presence of highly nutritious bioactive compounds and consumer demand for convenient beverages. However, the lack of literature on the impact of heat-induced component interactions during processing hinders the production of high-quality milk-tea powders. The production process of milk-tea powder blends includes the key steps of pasteurization, evaporation, and spray drying. Controlling heat-induced interactions, such as protein-protein, protein-carbohydrate, protein-polyphenol, carbohydrate-polyphenol, and carbohydrate-polyphenol, during pasteurization, concentration, and evaporation is essential for producing a high-quality milk-tea powder with favorable physical, structural, rheological, sensory, and nutritional qualities. Adjusting production parameters, such as the type and the composition of ingredients, processing methods, and processing conditions, is a great way to modify these interactions between components in the formulation, and thereby, provide improved properties and storage stability for the final product. Therefore, this review comprehensively discusses how molecular-level interactions among proteins, carbohydrates, and polyphenols are affected by various unit operations during the production of milk-tea powders.

Effect of different salts on the foaming properties of model protein systems for infant formula

This multiscale study aimed to evaluate the effects of different salts (NaCl, KCl, MgCl2, and CaCl2) on the foaming capacity (FC) and foam stability (FS) of model protein systems (MPS) for infant formula via changes in surface and structural properties. Our results showed that the FC and FS of MPS were increased with the addition of NaCl, KCl, and MgCl2, whereas CaCl2 significantly decreased FC (79.5 ± 10.6%) and increased FS (93.2 ± 2.2%). The surface hydrophobicity was increased and the net charge and surface tension were reduced after the addition of salts. Structural analysis revealed the reduction of intensity of intrinsic fluorescence spectroscopy and UV absorption, and the conversion of α-helix into β-strand, which was attributed to protein agglomeration. Additionally, MgCl2 and CaCl2 exhibited larger size and lower net charge compared with NaCl and KCl, indicating a greater ability to bind to charged amino acids and form larger aggregates. Correlation analysis indicated that FC was positively related to adsorbed protein and β-turn and negatively correlated with particle size. In addition, FS showed a positive correlation with β-strand, apparent viscosity, and zeta potential. However, it exhibited a negative correlation with β-turn, α-helix, and sulfhydryl content. These results provide a theoretical reference for further understanding of the effect of salts on the foaming properties of MPS.

Implications of Pulsed Electric Field Pre-Treatment on Goat Milk Pasteurization

Goat milk is an interesting product from a nutritional and health standpoint, although its physico-chemical composition presents some technological challenges, mainly for being less stable than cow's milk at high temperatures. As pasteurization and ultra-high temperature processing are universally employed to ensure milk quality and safety, non-thermal methods, such as pulsed electric fields (PEFs), reduce the microbial load and eliminate pathogens, representing an interesting alternative for processing this product. This study demonstrates how the combined use of a PEF with short thermal processing and moderate temperature can be effective and energy-efficient in goat milk processing. A combination of thermal treatment at 63 °C after a low-intensity PEF (50 µs pulses, 3 Hz, and 10 kV·cm-1) caused the same reduction effect on the population of Listeria monocytogenes (goat's raw milk artificially spiked), as compared to a thermal treatment at 72 °C without a PEF. However, z values are significantly higher when PEF is used as a pre-treatment, suggesting that it may induce heat resistance in the survival population of L. monocytogenes. The sensitivity of L. monocytogenes to high temperatures is less pronounced in goat's milk than cow's milk, with a more pronounced impact of a PEF on lethality when combined with lower temperatures in goat's milk. The effect of a PEF on Escherichia coli viability was even more pronounced. It was also observed that thermal treatment energy needs with a PEF as a pre-treatment can be reduced by at least 50% of the total energy requirements.

Structure and in vitro digestion characteristics of skim goat milk protein during processing: effects of fat separation

BACKGROUND

Although nonfat milk has been used worldwide in the industrial dairy process, little is known about the effects of fat separation during the manufacturing process on skim milk's structural and digestive properties. This study investigated the effects of the manufacturing process on the structure and in vitro digestion properties of skim goat milk, particularly emphasizing fat separation.

RESULTS

Changes in the surface charge and hydrophobicity of milk proteins caused by fat separation resulted in oxidation and aggregation in the subsequent homogenization, heat and spray-drying processing, which affected its digestibility. Compared with separation by dish separator (DS), skim milk after tubular centrifugal separation (CS) showed a higher initial and final digestibility. The CS samples also had a lower surface hydrophobicity level and higher free sulfhydryl content, ζ-potential, and average particle size (P < 0.05). Goat milk protein after CS was more readily oxidized and aggregated during the subsequent homogenization and heat treatment, as evidenced by the higher carbonyl content and particle size. Centrifugal separation also converted more β-sheets to α-helices, thus promoting the aggregation of oxidized skim milk protein.

CONCLUSION

The skim milk after CS and DS demonstrated different structural and digestive properties. Skim goat milk products after CS were more susceptible to oxidant-induced protein structural changes, resulting in higher protein digestibility. These findings provide insights into the mechanism involved in the control of gastric digestion of skim milk during manufacturing process. © 2023 Society of Chemical Industry.

Contribution of process-induced molten-globule state formation in duck liver protein to the enhanced binding ability of (E,E)-2,4-heptadienal

BACKGROUND

Extracted proteins of alternative animal origin tend to present strong off-flavor perception due to physicochemical interactions of coextracted off-flavor compounds with proteins. To investigate the relationship between absorption behaviors of volatile aromas and the processes-induced variations in protein microstructures and molecular conformations, duck liver protein isolate (DLp) was subjected to heating (65/100 °C, 15 min) and ultra-high pressure (UHP, 100-500 MPa/10 min, 28 °C) treatments to obtain differential unfolded protein states.

RESULTS

Heat and UHP treatments induced the unfolding of DLp to varied degrees, as revealed by fluorescence spectroscopy, ultraviolet-visible absorption, circular dichroism spectra and surface hydrophobicity measurements. Two types of heating-denatured states with varied unfolding degrees were obtained, while UHP at both levels of 100/500 MPa caused partial unfolding of DLp and the presence of a molten-globule state, which significantly enhanced the binding affinity between DLp and (E,E)-2,4-heptadienal. In particular, significantly modified secondary structures of DLp were observed in heating-denatured samples. Excessive denaturing and unfolding degrees resulted in no significant changes in the absorption behavior of the volatile ligand, as characterized by observations of fluorescence quenching and analysis of headspace concentrations.

CONCLUSION

Defining process-induced conformational transition behavior of matrix proteins could be a promising strategy to regulate food flavor attributes and, particularly, to produce DLp coextracted with limited off-flavor components by modifying their interaction during extraction processes. © 2023 Society of Chemical Industry.

Effect of Direct Steam Injection and Instantaneous Ultra-High-Temperature (DSI-IUHT) Sterilization on the Physicochemical Quality and Volatile Flavor Components of Milk

The effects of variations in the heat treatment process of milk on its quality and flavor are inevitable. This study investigated the effect of direct steam injection and instantaneous ultra-high-temperature (DSI-IUHT, 143 °C, 1-2 s) sterilization on the physicochemical properties, whey protein denaturation (WPD) rate, and volatile compounds (VCs) of milk. The experiment compared raw milk as a control with high-temperature short-time (HTST, 75 °C 15 s and 85 °C 15 s) pasteurization and indirect ultra-high-temperature (IND-UHT, 143 °C, 3-4 s) sterilization. The results showed no significant differences (p > 0.05) in physical stability between milk samples with different heat treatments. The DSI-IUHT and IND-UHT milks presented smaller particle sizes (p < 0.05) and more concentrated distributions than the HTST milk. The apparent viscosity of the DSI-IUHT milk was significantly higher than the other samples (p < 0.05) and is consistent with the microrheological results. The WPD of DSI-IUHT milk was 27.52% lower than that of IND-UHT milk. Solid-phase microextraction (SPME) and solvent-assisted flavor evaporation (SAFE) were combined with the WPD rates to analyze the VCs, which were positively correlated with ketones, acids, and esters and negatively associated with alcohols, heterocycles, sulfur, and aldehydes. The DSI-IUHT samples exhibited a higher similarity to raw and HTST milk than the IND-UHT samples. In summary, DSI-IUHT was more successful in preserving the milk's quality due to its milder sterilization conditions compared to IND-UHT. This study provides excellent reference data for the application of DSI-IUHT treatment in milk processing.

Thickening mechanism of recombined dairy cream stored at 4 °C: Changes in the composition and structure of milk protein under different sterilization intensities

This work elucidates the mechanism involved in the effect of varying sterilization intensities on RDC thickening via comparative analysis of the changes in the composition and structure of RDC interfacial protein after storage at 4 °C and at 25 °C. The results showed that pasteurized RDCs (75 °C for 16 s, 90 °C for 5 min) and high-temperature sterilized RDCs (105 °C for 3 min, 115 °C for 7 min and 121 °C for 7 min) did not thicken during storage at 25 °C, and had lower viscosities and higher Ca²⁺ concentrations than those stored at 4 °C. Whey protein (WP) aggregates were found to have been adsorbed at the interface of high-temperature treated RDCs stored at 4 °C, leading to the aggregation of fat globules and, consequently, reversible thickening. However, high-temperature sterilized RDCs underwent into irreversible thickening at 10 d, 7 d and 3 d. This phenomenon was attributed to the large amount of heat-induced whey protein and κ-casein complex that was absorbed on the oil-water interface, with Ca²⁺ bonded to form bridging flocculation, which altered the secondary structure of the interfacial protein to one with increased β-sheet content and decreased random coil content.

Fragile Effects of Climatic Variation on Goat Protein and its Products: A Review

Goats are useful to smaller communities because of their low production costs, limited feed requirements, rapid generation rates, and ability to consistently provide modest volumes of milk that are suitable for immediate use in home. The flavour of dairy dishes is greatly influenced by the proteins found in goat milk and contributing in texture, viscosity, and structure to dairy dishes, all of which enhance the dining experience. Amino acids like glycine, alanine, and peptides can act as precursors to other volatile aroma-active molecules and so set off basic flavours. Increasing temperatures have major consequences for goat milk by-products, including as altering their flavour through denaturation of proteins, the emission of sulfuric chemicals, and an eggy fragrance in the case of scaled milk. Although there has been increasing evidence that environmental changes have an impact on food availability and quality in recent decades, the impacts of these changes on food composition are still largely understood. The potential impact of climate change on food quality must be disclosed. This study suggests a fundamental, but as of yet unexplored, method by which climate change can impact global food and nutrition security: changes in food nutritional content beyond those caused by agricultural production.

Foaming and Physicochemical Properties of Commercial Protein Ingredients Used for Infant Formula Formulation

Protein, as one of the main ingredients for infant formula, may be closely related to the undesirable foam formed during the reconstitution of infant formula. Demineralized whey powder (D70 and D90), whey protein concentrate (WPC), and skimmed milk powder (SMP) are the four protein ingredients commonly used in infant formula formulation. The foaming and physicochemical properties of these four protein ingredients from different manufacturers were analyzed in the present study. Significant differences (p < 0.05) in foaming properties were found between the samples from different manufacturers. SMP showed a highest foaming capacity (FC) and foam stability (FS), followed by D70, D90, and WPC. Although the protein composition was similar based on reducing SDS-PAGE, the aggregates varied based on non-reducing SDS-PAGE, probably resulting in the different foaming properties. Particle size, zeta potential, and solubility of the protein ingredients were assessed. The protein structure was evaluated by circular dichroism, surface hydrophobicity, and free sulfhydryl. Pearson’s correlation analysis demonstrated that FC and FS were positively correlated with random coil (0.55 and 0.74), β-turn (0.53 and 0.73), and zeta potential (0.55 and 0.51) but negatively correlated with β-strand (−0.56 and −0.71), free sulfhydryl (−0.56 and −0.63), particle size (−0.45 and −0.53), and fat content (−0.50 and −0.49). The results of this study could provide a theoretical guidance for reducing formation of foam of infant formula products during reconstitution.

Effect of Hydrothermal Treatment on the Structure and Functional Properties of Quinoa Protein Isolate

The aim of this study was to investigate the effects of hydrothermal treatment at different temperatures and times on the structure and functional properties of quinoa protein isolate (QPI). The structure of QPI was investigated by analyzing changes in the intrinsic fluorescence spectrum, ultra-violet (UV) spectrum, and Fourier transform infrared spectrum. The solubility, water/oil-holding capacity, emulsifying activity, and emulsion stability of QPI were studied, as were the particle size and the thermogravimetric properties of QPI. The results showed that the average particle size of QPI gradually increased with the increase in hydrothermal treatment time and temperature, and reached a maximum value of 121 °C for 30 min. The surface morphology also became rough and its thermal stability also increased. The endogenous fluorescence and UV spectral intensity at 280 nm decreased gradually with increasing hydrothermal treatment time and temperature, and reduced to the minimum values at 121 °C for 30 min, respectively. After hydrothermal treatment, the secondary structure of QPI tended to be disordered. The functional properties of QPI after treatment were all superior to those of the control. The results of this study might provide a basis for the processing and utilization of QPI.

Nutritional Profile, Processing and Potential Products: A Comparative Review of Goat Milk

Goat milk contains an abundance of different macro and micro-nutrients. Compared with other milk, goat milk is a viable option due to its low allergy levels and is preferred for infants with cow milk allergies. A wide variety of goat milk-based products, including yoghurt, ice cream, fermented milk, and cheese, are available on the market. They are produced using effective processing technology and are known to exhibit numerous health benefits after consumption. However, goat milk consumption is limited in many nations (compared with cow, buffalo, camel, and sheep milk) due to a lack of awareness of its nutritional composition and the significance of its different byproducts. This review provides a detailed explanation of the various macronutrients that may be present, with special attention paid to each component, its purpose, and the health benefits it offers. It also compares goat milk with milk from other species in terms of its superiority and nutritional content, as well as the types, production methods, health advantages, and other beneficial properties of the various goat milk products that are currently available on the market.

Application of Calcium Citrate in the Manufacture of Acid Rennet Cheese Produced from High-Heat-Treated Goat’s Milk from Spring and Autumn Season

The stability of milk proteins is affected by changes in the pH value of milk, the heating temperature, and the addition of calcium compounds or chelating agents, which can cause alterations in calcium distribution. The purpose of this study was to determine the potential of the use of calcium citrate to manufacture fresh acid rennet cheese from high-temperature-pasteurized goat’s milk (90 °C, 15 s) from the spring and autumn season and the effect of the calcium dose used on the physicochemical and organoleptic properties of the cheese. Autumn milk was found to be a richer source of total solids, confirming the effect of the production season on milk quality. The applied doses of calcium did not cause the denaturation of goat milk proteins and allowed pasteurization to take place at 90 °C for 15 s. The addition of calcium citrate resulted in a significant increase in the pH value of milk and cheese compared to the control sample. Adding 15 and 20 mg of Ca 100 g⁻¹ to milk as citrate had the most beneficial effect on increasing protein retention in cheese in both seasons, showing a rise from 1.33% to 2.40%. The production season significantly influenced the cheese yield. The control goat cheese from the autumn season showed a 6.85% higher yield compared to the spring cheese. An increase in cheese yield was also observed as the calcium dose of milk increased. The content of micro- and microelements in cheese was affected by the production season. The addition of calcium citrate to milk resulted in a significant increase in the calcium content of cheese—from 120.83 to 147.45 mg 100 g⁻¹ in the spring season and from 130.66 to 151.21 mg 100 g⁻¹ in the autumn season. Increasing the dose of calcium increased the hardness of cheese samples by 1.37 N in the spring and 0.90 N in the autumn. The organoleptic evaluation showed that adding calcium to milk did not significantly affect the organoleptic characteristics of goat cheese.

Foaming characteristics and impact of ethanol pretreatment in drying behavior and physical characteristics for avocado pulp powder obtained by foam mat drying

The objective of this study was to optimize the production of powdered avocado using foam mat drying. In order to achieve this, the effect of Emustab^® (4, 6, and 8% w/w), goat's milk (10, 15, and 20% w/w), and whipping time (15, 20, and 25 min) on the foam physical properties of avocado pulp were evaluated. In addition, the influence of ethanol pretreatment on the drying kinetics, thermodynamic properties, and physicochemical characteristics of the powders was also assessed. An experimental design 2³ with three central points was used in this study and optimized foam conditions were dried at 50, 60, and 70°C, with a fixed air speed of 1.5 m/s. Empirical and diffusive models (boundary conditions of the third type) were adjusted to the experimental data to describe the drying kinetics and to determine the process activation energy and thermodynamic properties. The final products were characterized regarding their physical properties. Optimized foam mat drying conditions were achieved when avocado pulp was whipped for 15 min and 8% of Emustab^® and 20% of powdered goat milk were used as foaming agents. The use of an ethanol pretreatment and higher drying temperature (70°C) resulted in higher drying rate (1.6 × 10² /min) and shorter processing time (270 min). The ethanol pretreatment reduced the activation energy and Biot number and led to more uniform moisture distribution. The physical properties, such as water content, water activity, bulk, and tapped densities decreased with an increase in drying temperature and pretreatment with ethanol, whereas water absorption capacity increased. PRACTICAL APPLICATION: In this work, new information about the drying kinetics and mass transfer of the foam mat avocado pulp using ethanol as pretreatment is obtained. The results will contribute to the optimization production avocado foaming and powder. Ethanol pretreatment can represent an alternative to minimize the negative impacts on drying process and can be surely suggested as an industrial application.

Effect of Heat Treatment on the Property, Structure, and Aggregation of Skim Milk Proteins

To study the mechanism of heat-induced protein aggregates, skim milk was heated at 55, 65, 75, 85, and 95°C for 30 s. Then, the sulfhydryl content, surface hydrophobicity, and secondary structure of heat-treated skim milk were studied. Treating skim milk at different temperatures induced a decrease in sulfhydryl content (75.9% at 95°C) and an increase in surface hydrophobicity (44% at 95°C) with a disrupted secondary structure containing random coil, β-sheet, and β-turn of skim milk proteins. The change in these properties facilitated aggregate formation through disulfide bonds and hydrophobicity interaction. Microstructural observation also showed a higher degree of aggregation when skim milk was heated at 85 and 95°C. The result of two-dimensional polyacrylamide gel electrophoresis demonstrated that the aggregates consisted of a high proportion of κ-casein, β-lactoglobulin, and other whey proteins.

Polyphenol bioaccessibility and antioxidant properties of in vitro digested spray-dried thermally-treated skimmed goat milk enriched with pollen

The aim of research was to determine polyphenols bioaccessibility and antioxidant properties of thermally-treated skimmed goat milk enriched with sunflower bee-collected pollen through in vitro digestion. HPLC analysis confirmed that pollen-enriched milk contained flavonols as the main phenolic fraction (80.7-76.2%) followed by phenolic acids (14.2-17.4%). Among individual compounds quercetin-3-O-glucoside (155.1-197.2 μg/L) and p-coumaric acid (29.5-30.7 μg/L) were the main quantified flavonols and phenolic acids, respectively. After digestion of milk/pollen sample, total polyphenols recovery was 30.71% with higher phenolic acids recovery (40.1%) compared to flavonols (28.3%) indicating strong interactions between caprine milk casein micelles and pollen polyphenols. Applied antioxidant assays (phosphomolybdenum, ABTS•⁺scavenging activity and ferrous-ion-chelating capacity) have confirmed complexity of prepared product- it had high ability to quench ABTS•⁺ radicals and to form chelating complexes with Fe²⁺ ions. Digestion provoked 20% reduction in total antioxidant capacity compared to the initial sample. TTSG milk/pollen powder could be good functional ingredient.

Physicochemical and functional properties of goat milk whey protein and casein obtained during different lactation stages

During lactation, goat milk contains colostrum, transitional milk, mature milk, and end milk. The protein present in goat milk during different lactation periods has different characteristics. This study aimed to characterize the protein profile of goat milk samples obtained at different lactation stages and to identify changes in the physicochemical and functional properties of whey protein and casein from goat milk collected at 1, 3, 15, 100, and 200 d after calving. The results demonstrated that the lactation period had a great influence on the physicochemical and functional properties of goat milk whey protein and casein, especially the protein properties of colostrum on the first day after delivery. The denaturation temperature, hydrophobicity, and turbidity of whey protein were significantly higher on the first day postpartum than at other lactation periods. Correspondingly, the colostrum whey protein also had better functional properties, such as emulsification, oil holding capacity, and foaming properties on the first day postpartum than at other lactation periods. For casein, the turbidity, particle size, water holding capacity, and foaming properties on the first day after delivery were significantly higher than those at other lactation periods, whereas the denaturation temperature, oil holding capacity, and emulsification followed the opposite trend. For both whey protein and casein, the 2 indicators of emulsifying properties, namely, emulsifying activity index and the emulsion stability, also followed an opposite trend relative to lactation stage, whereas the changes in foaming capacity with the lactation period were completely consistent with the change of foaming stability. These findings could provide useful information for the use of goat milk whey protein and casein obtained during different lactation stages in the dairy industry.