The combined effects of different fat replacers and rennet casein on the properties of reduced-fat processed cheese

Enzymatic production of xylooligosaccharide from lignocellulosic and marine biomass: A review of current progress, challenges, and its applications in food sectors

Over the last decade, xylooligosaccharides (XOS) have attracted great attentions because of their unique chemical properties and excellent prebiotic effects. Among the current strategies for XOS production, enzymatic hydrolysis is preferred due to its green and safe process, simplicity in equipment, and high control of the degrees of polymerization. This paper comprehensively summarizes various lignocellulosic biomass and marine biomass employed in enzymatic production of XOS. The importance and advantages of enzyme immobilization in XOS production are also discussed. Many novel immobilization techniques for xylanase are presented. In addition, bioinformatics techniques for the mining and designing of new xylanase are also described. Moreover, XOS has exhibited great potential applications in the food industry as diverse roles, such as a sugar replacer, a fat replacer, and cryoprotectant. This review systematically summarizes the current research progress on the applications of XOS in food sectors, including beverages, bakery products, dairy products, meat products, aquatic products, food packaging film, wall materials, and others. It is anticipated that this paper will act as a reference for the further development and application of XOS in food sectors and other fields.

The colloid and interface strategies to inhibit lipid digestion for designing low-calorie food

Although fat is one of the indispensable components of food flavor, excessive fat consumption could cause obesity, metabolism syndromes and an imbalance in the intestinal flora. In the pursuit of a healthy diet, designing fat reducing foods by inhibiting lipid digestion and calorie intake is a promising strategy. Altering the gastric emptying rates of lipids as well as acting on the lipase by suppressing the enzymatic activity or limiting lipase diffusion via interfacial modulation can effectively decrease lipolysis rates. In this review, we provide a comprehensive overview of colloid-based strategies that can be employed to retard lipid hydrolysis, including pancreatic lipase inhibitors, emulsion-based interfacial modulation and fat substitutes. Plants-/microorganisms-derived lipase inhibitors bind to catalytic active sites and change the enzymatic conformation to inhibit lipase activity. Introducing oil-in-water Pickering emulsions into the food can effectively delay lipolysis via steric hindrance of interfacial particulates. Regulating stability and physical states of emulsions can also affect the rate of hydrolysis by altering the active hydrolysis surface. 3D network structure assembled by fat substitutes with high viscosity can not only slow down the peristole and obstruct the diffusion of lipase to the oil droplets but also impede the transportation of lipolysis products to epithelial cells for adsorption. Their applications in low-calorie bakery, dairy and meat products were also discussed, emphasizing fat intake reduction, structure and flavor retention and potential health benefits. However, further application of these strategies in large-scale food production still requires more optimization on cost and lipid reducing effects. This review provides a comprehensive review on colloidal approaches, design, principles and applications of fat reducing strategies to meet the growing demand for healthier diet and offer practical insights for the low-calorie food industry.

The Effect of Corn Dextrin on the Rheological, Tribological, and Aroma Release Properties of a Reduced-Fat Model of Processed Cheese Spread

Low-calorie and low-fat foods have been introduced to the market to fight the increasing incidence of overweightness and obesity. New approaches and high-quality fat replacers may overcome the poor organoleptic properties of such products. A model of processed cheese spread (PCS) was produced as a full-fat version and with three levels of fat reduction (30%, 50%, and 70%). Fat was replaced by water or by corn dextrin (CD), a dietary fiber. Additionally, in the 50% reduced-fat spreads, fat was replaced by various ratios of CD and lactose (100:0, 75:25, 50:50, 25:75, and 0:100). The effect of each formulation was determined by measuring the textural (firmness, stickiness, and spreadability), rheological (flow behavior and oscillating rheology), tribological, and microstructural (cryo-SEM) properties of the samples, as well as the dynamic aroma release of six aroma compounds typically found in cheese. Winter’s critical gel theory was a good approach to characterizing PCS with less instrumental effort and costs: the gel strength and interaction factors correlated very well with the spreadability and lubrication properties of the spreads. CD and fat exhibited similar interaction capacities with the aroma compounds, resulting in a similar release pattern. Overall, the properties of the sample with 50% fat replaced by CD were most similar to those of the full-fat sample. Thus, CD is a promising fat replacer in PCS and, most likely, in other dairy-based emulsions.

Influence of Fat Replacers on the Rheological, Tribological, and Aroma Release Properties of Reduced-Fat Emulsions

Reduced-fat food products can help manage diet-related health issues, but consumers often link them with poor sensory qualities. Thus, high-quality fat replacers are necessary to develop appealing reduced-fat products. A full-fat model emulsion was reduced in fat by replacing fat with either water, lactose, corn dextrin (CD), inulin, polydextrose, or microparticulated whey protein (MWP) as fat replacers. The effect of fat reduction and replacement, as well as the suitability of different types of fat replacers, were determined by analyzing fat droplet size distribution, composition, rheological and tribological properties, and the dynamic aroma release of six aroma compounds prevalent in cheese and other dairy products. None of the formulations revealed a considerable effect on droplet size distribution. MWP strongly increased the Kokini oral shear stress and viscosity, while CD exhibited similar values to the full-fat emulsion. All four fat replacers improved the lubricity of the reduced-fat samples. Butane-2,3-dione and 3-methylbutanoic acid were less affected by the changes in the formulation than butanoic acid, heptan-2-one, ethyl butanoate, and nonan-2-one. The aroma releases of the emulsions comprising MWP and CD were most similar to that of the full-fat emulsion. Therefore, CD was identified as a promising fat replacer for reduced-fat emulsions.

Characterization of Reduced-Fat Mayonnaise and Comparison of Sensory Perception, Rheological, Tribological, and Textural Analyses

Reduced-fat products can help to fight obesity and its associated health risks. To develop appealing products, both product-specific fat replacers and suitable analytical methods for the characterization of fat-associated properties are important. The rheology, tribology, texture, and spreadability of a reduced-fat mayonnaise with different concentrations of corn dextrin were analyzed to determine properties such as flow behavior, viscosity, lubricity, firmness, and stickiness. Additionally, a sensory panel analyzed the samples for their mouthfeel (creaminess, firmness, and stickiness). Correlations between the results of the instrumental methods suggested that the analytical effort for the future development of appealing reduced-fat food products can be reduced. In addition, several correlations were identified between the instrumental and the sensory data. Results from tribological measurements correlated with the sensory attribute of stickiness, suggesting that tribometry can complement or constitute an alternative to complex and expensive human sensory tests. Additionally, the use of Stevens' power law showed a high correlation between the Kokini oral shear stress and the sensory attribute of creaminess. The instrumental texture properties (firmness, stickiness) also correlated with the sensory sensation. The identified correlations obtained from comparing different methods may help to estimate the possible applications of new fat replacers and facilitate innovative product development.

Chemical, technological, instrumental, microstructural, oxidative and sensory properties of emulsified sausages formulated with microparticulated whey protein to substitute animal fat

The current study was conducted to investigate the utilization of microparticulated whey protein (MWP) in different levels (5% or 10%) as partial fat replacers in emulsified beef sausage formulations. Inclusion of MWP resulted in sausages having decreased amounts of fat and energy while increased amounts of protein. Both emulsion stability and processing yield were the highest in samples containing MWP. No differences were recorded in L* values of the sausages although both a* and b* values were higher in MWP sausages than in full-fat sausages regardless of MWP level. Increased amounts of MWP led to lower hardness, chewiness and adhesiveness. Micrographs brought out the organized and reticulated structure of the sausages containing 10% MWP. MWP did not cause unfavorable impacts in general sensory acceptance, besides, it was associated with increased oxidative stability. Overall, the findings highlighted the favorable effects of MWP in terms of nutritional, technological, sensory and oxidative quality indicating the possibility to design low-fat emulsified meat product formulations.

Thermosonicated whey protein concentrate blends on quality attributes of reduced fat Panela cheese

Aiming at producing a reduced fat cheese (RFC) as an alternative to full-fat Panela cheese, a highly consumed fresh Mexican dairy product, thermosonication (TS) processes (24 kHz, 400 W nominal power, 2, 4 and 6 min; 50, 55 and 60 °C) were evaluated to treat WPC (80% protein) blended with reduced-fat milk (1 and 2% fat), which were later LTLT pasteurized. TS blends were compared in terms of their technological properties (water holding capacity-WPC, gel firmness- GF, color, pH and titratable acidity) with those of a regular full fat (3%) LTLT pasteurized milk used as a control. Afterwards, a regression analysis was carried out with the obtained data in order to select the most appropriate conditions for cheesemaking purposes (similar GF, higher WHC with respect to the control), minimize both fat content and TS treatment duration to minimize energy expenses. According to these restrictions, the selected conditions were 1.5% fat milk-WPC blend, TS treated at 60 °C for 120 s; 1% fat milk-WPC blend, TS treated at 50 °C for 120 s and 1% fat milk-WPC blend, 50 °C for 144 s, which allowed preparing low fat cheeses (LFCs). These TS treatments were applied in a larger scale to elaborate Panela-type LFCs comparing different technological properties (cheese yield, syneresis, water content, texture profile analysis, color and titratable acidity) with those of a full fat variety, at day 1 and during 14 days of refrigerated storage. Results showed similar texture profiles of LFC cheeses and full fat milk cheeses throughout their storage period with significant changes in composition parameters (higher moisture, protein and salt contents, with low fat percentages), syneresis, selected color parameters (hue, b*), with no observed changes in cheese yield, TA and pH during cheese storage. These promising results are encouraging to develop LFCs with no physicochemical or technological defects using novel processing techniques that may help reducing calorie consumption without compromising sensory acceptability.

Tailoring the Structure of Lipids, Oleogels and Fat Replacers by Different Approaches for Solving the Trans-Fat Issue-A Review

The issue of the adverse effects of trans-fatty acids has become more transparent in recent years due to researched evidence of their link with coronary diseases, obesity or type 2 diabetes. Apart from conventional techniques for lipid structuring, novel nonconventional approaches for the same matter, such as enzymatic interesterification, genetic modification, oleogelation or using components from nonlipid origins such as fat replacers have been proposed, leading to a product with a healthier nutritional profile (low in saturated fats, zero trans fats and high in polyunsaturated fats). However, replacing conventional fat with a structured lipid or with a fat mimetic can alternate some of the technological operations or the food quality impeding consumers' acceptance. In this review, we summarize the research of the different existing methods (including conventional and nonconventional) for tailoring lipids in order to give a concise and critical overview in the field. Specifically, raw materials, methods for their production and the potential of food application, together with the properties of new product formulations, have been discussed. Future perspectives, such as the possibility of bioengineering approaches and the valorization of industrial side streams in the framework of Green Production and Circular Economy in the production of tailored lipids, have been highlighted. Additionally, a schematic diagram classifying conventional and nonconventional techniques is proposed based on the processing steps included in tailored lipid production as a convenient and straightforward tool for research and industry searching for healthy, sustainable and zero trans edible lipid system alternatives.

Inulin gelled emulsion as a fat replacer and fiber carrier in healthier Bologna sausage

The effects of gelled emulsions (GE) used as animal fat replacers in terms of the nutritional, technological, and sensory properties of Bologna sausages during 60 days of chilled storage have been studied. Samples with GE added exhibited a fat reduction of 31%. Sausages with GE had higher values of L* and lower values of a* compared to the control. Harder sausages were obtained by the addition of GE. Higher lipid oxidation rates were found with increasing amounts of GE in the reformulated products. In addition, the relaxation time was not affected by the reformulation. All samples were deemed acceptable by consumer tests. However, CATA (Check-all-that-apply) tests showed that Bolognas formulated with partial or total pork fat replaced with GE were described as rubbery, not very spicy and firm, appeared to be dry and opaque, and had an aftertaste. Chilled storage significantly affected the Thiobarbituric Acid Reactive Substances (TBARS) values and slightly affected the pH values, texture, color, and NMR data. An important result is that the panelists did not detect the oxidation results in relation to the TBARS values, and the addition of a GE with inulin as dietary fiber may be a good strategy to make Bologna sausage healthier.

Review on fat replacement using protein-based microparticulated powders or microgels: A textural perspective

Background

Due to the growing rise in obesity and food-linked diseases, the replacement of calorie-dense fat has been a key focus of food industries in the last few decades with proteins being identified as promising fat replacers (FRs).

Scope and approach

This review aims to provide an overview of animal and plant protein-based FR studies that have been performed in the last 5 years. Protein isolates/concentrates, their microparticulated forms and protein microgels in model and real foods have been examined. Special emphasis has been given on the characterisation techniques that have been used to compare the full fat (FF) and low fat (LF) versions of the foods using FRs.

Key findings and conclusions

Microparticulated whey protein (MWP) has been the preferred choice FR with some success in replacing fat in model foods and dairy applications. Plant proteins on the other hand have attracted limited research attention as FRs, but show success similar to that of animal proteins. Key characterisation techniques used to compare full fat with low fat products containing FRs have been apparent viscosity, texture profile analysis, microscopy, particle size and sensory properties with oral tribology being a relatively recent undertaking. Coupling tribology with adsorption techniques (muco-adhesion) can be effective to bridge the instrumental-sensory property gap and might accelerate the development cycle of designing low/no fat products. From a formulation viewpoint, sub-micron sized microgels that show shear-thinning behaviour and have boundary lubrication properties offer promises with respect to exploiting their fat replacement potential in the future.