Application of Exopolysaccharide-Producing Cultures in Reduced-Fat Cheddar Cheese: Texture and Melting Properties

Microbial exopolysaccharide: Sources, stress conditions, properties and application in food and environment: A comprehensive review

Microbial glucan or exopolysaccharides (EPS) have caught an eye of researchers from decades. The unique characteristics of EPS make it suitable for various food and environmental applications. This review overviews the different types of exopolysaccharides, sources, stress conditions, properties, characterization techniques and applications in food and environment. The yield and production condition of EPS is a major factor affecting the cost and its applications. Stress conditions are very important as it stimulates the microorganism for enhanced EPS production and affects its properties. As far as application is concerned specific properties of EPS such as, hydrophilicity, less oil uptake behavior, film forming ability, adsorption potential have applications in both food and environment sector. Novel and improved method of production, feed stock and right choice of microorganisms with stress conditions are critical for desired functionality and yield of the EPS.

Measurement of water-holding capacity in fermented milk using near-infrared spectroscopy combined with chemometric methods

We investigated the use of near-infrared spectroscopy (NIR) for measuring water-holding capacity (WHC) in fermented milk. Increased WHC ensures improved texture and decreased syneresis in fermented dairy products and also improves cheese yield. NIR combined with partial least-squares-discriminant analysis (PLS-DA) was found to be a promising rapid and non-invasive method with no pretreatment of the samples for prediction of WHC in fermented milk samples. Analysis of the chemical bonds in the region 10 700-4500 cm-1 (935-2200 nm) of the electromagnetic spectrum was able to distinguish between samples with high vs. low WHC. This technique was successfully used to screen different strains of lactic acid bacteria for their ability to provide fermented milk with increased WHC, which is of great importance for use in various dairy products.

Ingredients, Processing, and Fermentation: Addressing the Organoleptic Boundaries of Plant-Based Dairy Analogues

Consumer interest and research in plant-based dairy analogues has been growing in recent years because of increasingly negative implications of animal-derived products on human health, animal wellbeing, and the environment. However, plant-based dairy analogues face many challenges in mimicking the organoleptic properties of dairy products due to their undesirable off-flavours and textures. This article thus reviews fermentation as a viable pathway to developing clean-label plant-based dairy analogues with satisfactory consumer acceptability. Discussions on complementary strategies such as raw material selection and extraction technologies are also included. An overview of plant raw materials with the potential to be applied in dairy analogues is first discussed, followed by a review of the processing steps and innovative techniques required to transform these plant raw materials into functional ingredients such as plant-based aqueous extracts or flours for subsequent fermentation. Finally, the various fermentation (bacterial, yeast, and fungal) methodologies applied for the improvement of texture and other sensory qualities of plant-based dairy analogues are covered. Concerted research efforts would be required in the future to tailor and optimise the presented wide diversity of options to produce plant-based fermented dairy analogues that are both delicious and nutritionally adequate.

Influence of homopolysaccharide-producing lactic acid bacteria on the spreadability of raw fermented sausages (onion mettwurst)

The purpose of the study was to investigate the effect of a reduced pH value (5.1 instead of 5.5 to 5.6) on the properties of highly perishable, spreadable raw fermented sausages (onion mettwurst) with or without the addition of homopolysaccharide (HoPS)-producing lactic acid bacteria (LAB). Hence, sausages with HoPS-producing LAB and a pH value of 5.1 were produced and compared to sausages (pH 5.1) produced with a non-exopolysaccharide (EPS)-forming strain (Lactobacillus sakei TMW 1.2037). Microbial growth and pH values were monitored during processing (24 °C for 48 hr, 10 °C for 24 hr) and storage (14 days at 0 to 2 °C). Furthermore, fat (Weibull-Stoldt) and EPS contents were determined in the final products. Sausages were characterized using texture profile and sensory analysis. The fat contents ranged from 16% to 19% and the determined EPS concentrations ranged from 0.17 to 0.59 g/kg for L. sakei TMW 1.411 and Lactobacillus curvatus TMW 1.1928 and from 0.67 to 1.58 g/kg for L. curvatus TMW 1.51. The strains L. sakei TMW 1.411 and L. curvatus TMW 1.51 reduced the hardness of the samples significantly (P < 0.05) compared to the control samples. Regarding spreadability and mouthfeel, sausages containing an EPS-forming culture were rated slightly better than the control samples and the taste was not negatively influenced. PRACTICAL APPLICATION: This study clearly demonstrated that it is promising to apply HoPS-producing LAB to maintain the spreadability of pH-reduced (pH 5.1) spreadable raw fermented onion mettwurst, which may prospectively give the opportunity to increase the safety of this highly perishable product.

Change of proteolysis and sensory profile during ripening of Cheddar-style cheese as influenced by a microbial rennet from rice wine

To test the potential of a novel microbial rennet isolated from traditional fermented rice wine for cheese making, Cheddar-style cheese made with this enzyme was studied for changes in composition, proteolysis, and sensory profile during 90 days of ripening in comparison with a control cheese made with a commercial rennet. The initial proteolysis assay of the microbial rennet on milk proteins indicated a notable increase in the hydrolysis of casein components (α-, β-, and κ-caseins) but no effect on whey proteins upon increasing the concentration of the enzyme. Correspondingly, compared to cheese made with commercial rennet, the use of the microbial rennet in Cheddar-style cheese resulted in significantly higher primary and secondary proteolysis in the later stages of ripening (60-90 days ripening) and thus a softer texture and the formation of more volatile compounds and free amino acids (FAAs) despite its lower moisture content (41.7%, w/w). Though the cheese made with the microbial rennet was found to contain bitter-taste FAAs (1,000 mg/100 g), the combined effect of other-taste FAAs, including sweet (231 mg/100 g), umami (225 mg/100 g), and tasteless (361 mg/100 g) FAAs, in the cheese attenuated the bitter taste of the cheese. This analysis was in accordance with the sensory evaluation, which showed no significantly different sensory scoring between the cheeses made with the microbial and commercial rennets. The present study demonstrated a novel approach to evaluate the bitter taste of ripened cheese. The results of this study suggest the potential of the microbial rennet from rice wine to serve as a new source of milk-clotting agents in cheese making.

Main Groups of Microorganisms of Relevance for Food Safety and Stability

Microbiology is important to food safety, production, processing, preservation, and storage. Microbes such as bacteria, molds, and yeasts are employed for the foods production and food ingredients such as production of wine, beer, bakery, and dairy products. On the other hand, the growth and contamination of spoilage and pathogenic microorganisms is considered as one of the main causes to loss of foodstuff nowadays. Although technology, hygienic strategies, and traceability are important factors to prevent and delay microbial growth and contamination, food remains susceptible to spoilage and activity of pathogen microorganisms. Food loss by either spoilage or contaminated food affects food industry and consumers leading to economic losses and increased hospitalization costs. This chapter focuses on general aspects, characteristics, and importance of main microorganisms (bacteria, yeasts, molds, virus, and parasites) involved in food spoilage or contamination: known and recently discovered species; defects and alterations in foodstuff; most common food associated with each foodborne disease; resistance to thermal processing; occurrence in different countries; outbreaks; and associated symptoms.

Comparative efficacy analysis of anti-microbial peptides, LL-37 and indolicidin upon conjugation with CNT, in human monocytes

BACKGROUND

Antimicrobial peptides (AMPs) have the potential to serve as an alternative to antibiotic. AMPs usually exert bactericidal activity via direct killing of microbial pathogens. Reports have proposed that by harnessing innate immune activation, AMPs can regulate pathogen invasion and may control infection. It has been reported that AMPs could be utilized to activate the innate mucosal immune response in order to eliminate pathogenic infections. This way of controlling pathogen infection, by activating host immunity, confers the potential to the select AMPs to alleviate the problem of antibiotic resistance. Among various AMPs tested LL-37 and indolicidin, showed promise to be potential candidates for eliciting enhanced host innate immune responses. LL-37 and indolicidin had exhibited substantial innate immune activation in both human and murine macrophages. Dosage for each of the AMPs, however, was high with adverse side effects.

RESULTS

In this study, we reported that upon conjugation with carbon nanotubes (CNT), each AMP remained biologically functional at a concentration that was 1000-fold less than the dosage required for free AMP to remain active in the cells.

CONCLUSIONS

Current study also revealed that while indolicidin induced signalling events mediated through the TNFRSF1A pathway in THP1 cells, followed by activation of NFκB and c-JUN pathways, treatment of cells with LL-37 induced signalling events by activating IL1R, with subsequent activation of NFκB and NFAT2. Thp1 cells, primed with CNT conjugated LL-37 or indolicidin, are protected against Salmonella typhimurium infection at 16 h post challenge.

Past, present and future: The strength of plant-based dairy substitutes based on gluten-free raw materials

Plant-based foods are gaining popularity and the market is developing fast. This trend is based on several factors, like the change of lifestyle, interest in alternative diets, and the increasing awareness about sustainable production of food and especially proteins. Plant-based dairy substitutes can serve as an option to traditional food products, meeting many of these interests. However, the market is in its infancy and needs to progress. Trends show, that the market will change from being focused on mainly soya, almond and rice-based products, due to their unsustainable farming, and nutritional concerns, like genetic modification and low protein content. The market is likely to shift towards alternative plants to meet consumers' needs and desire for healthy, flavourful and intriguing products. In this regard, the aspect of allergy-free, like gluten-free products gain in importance. Research studies are approaching the nutritional quality of plant-based dairy substitutes, such as improving the protein quality and glycaemic properties. Furthermore, the application of these products or plant proteins as functional ingredients or substitutes for cow's milk in dairy products like cheese and yoghurt are disseminated. However, there is still a need for much more diversified studies in order to overcome stability, textural, nutritional and sensory problems.

Texture Profile Analysis of Sliced Cheese in relation to Chemical Composition and Storage Temperature

The quantitative relationships among chemical composition, storage temperature, and texture of cheese were not fully understood. In this study, the effects of composition and temperature on textural properties of eight common varieties of sliced cheese were examined. The textural properties of sliced cheeses, including firmness, cohesiveness, adhesiveness, springiness, chewiness, and resilience, were measured by texture profile analysis after storage at 4 and 25°C for 4 h. Multivariate logistic regression models were established to describe the quantitative relationships of textural properties (dependent variables) to chemical composition and storage temperature (independent variables) of sliced cheeses. Results showed that protein, fat, moisture, and sodium chloride contents as well as storage temperature significantly affected the texture of sliced cheeses (P<0.05). In particular, fat in the dry matter and moisture in the nonfat substances were negatively correlated with firmness of sliced cheeses (P<0.05). As storage temperature rose from 4 to 25°C, the average values of firmness, chewiness, and resilience substantially declined by 42%, 45%, and 17%, respectively (P<0.05). This study provided reference data for adjusting chemical composition and storage temperature of common cheese products to obtain favorable texture for Chinese consumers, which thereby facilitated the localization of cheese industry in Chinese market.

Effects of supercritical fluid extraction pressure on chemical composition, microbial population, polar lipid profile, and microstructure of goat cheese

The consumer trend for healthier food choices and preferences for low-fat products has increased the interest in low-fat cheese and nutraceutical dairy products. However, consumer preference is still for delicious food. Low- and reduced-fat cheeses are not completely accepted because of their unappealing properties compared with full-fat cheeses. The method reported here provides another option to the conventional cheese-making process to obtain lower fat cheese. Using CO(2) as a supercritical fluid offers an alternative to reduce fat in cheese after ripening, while maintaining the initial characteristics and flavor. The aim of this experiment was to evaluate the effect of pressure (10, 20, 30, and 40 × 10(6) Pa) of supercritical CO(2) on the amount of fat extracted, microbial population, polar lipid profile, and microstructure of 2 varieties of goat cheese: Majorero, a protected denomination of origin cheese from Spain, and goat Gouda-type cheese. The amount of fat was reduced 50 to 57% and 48 to 55% for Majorero and goat Gouda-type cheeses, respectively. Higher contents (on a fat basis) of sphingomyelin and phosphatidylcholine were found in Majorero cheese compared with control and goat Gouda-type cheeses. The microbial population was reduced after supercritical fluid extraction in both cheeses, and the lethality was higher as pressure increased in Majorero cheese, most noticeably on lactococcus and lactobacillus bacteria. The Gouda-type cheese did not contain any lactobacilli. Micrographs obtained from confocal laser scanning microscopy showed a more open matrix and whey pockets in the Majorero control cheese. This could explain the ease of extracting fat and reducing the microbial counts in this cheese after treatment with supercritical CO(2). Supercritical fluid extraction with CO(2) has great potential in the dairy industry and in commercial applications. The Majorero cheese obtained after the supercritical fluid extraction treatment was an excellent candidate as a low-fat goat cheese, lower in triglycerides and cholesterol but still with all the health benefits inherent in goat milk.

Production of volatile compounds in reconstituted milk reduced-fat cheese and the physicochemical properties as affected by exopolysaccharide-producing strain

The application of the exopolysaccharide-producing strains for improving the texture and technical properties of reduced-fat cheese looks very promising. Streptococcus thermophilus TM11 was evaluated for production of reduced-fat cheese using reconstituted milk powder (CRMP). The physicochemical analysis of fresh and stored cheeses showed that this strain slightly increased moisture content resulting in cheese with higher yield and lower protein content compared to the direct acidified cheese. The volatiles of cheese were determined by SPME and GC equipped with a mass spectrometer. The results indicated that the major compounds included aldehydes, ketones and acids, whereas, alcohols and branched-chain aldehydes that contribute to exciting and harsh flavors were not found in CRMP. By the textural profile analysis, we found the cheese made with S. thermophilus TM11 had lower cohesiveness, resilience and higher adhesiveness than the direct acidified cheese, and had similar hardness. Further, S. thermophilus TM11 greatly changed the protein matrix with more opened cavities according to observation by scanning electron microscopy. Consequently, use of S. thermophilus TM11 could endow CRMP with the novel and suitable flavor properties and improved texture quality.

Characteristics of reduced fat Cheddar cheese made from ultrafiltered milk with an exopolysaccharide-producing culture

In a previous study, ultrafiltration (UF) at 1·2×reduced residual chymosin activity and bitterness in exopolysaccharide (EPS)-positive reduced fat Cheddar cheese. The objective of this research was to study the effect of this level of concentration on the textural and functional characteristics of the reduced fat cheese. Ultrafiltration (1·2×) did not affect the hardness, cohesiveness, adhesiveness, chewiness, and gumminess of EPS-positive cheese. The 6-month old UF cheeses were springier than non-UF cheeses. However, the springiness of the EPS-positive cheese made from UF milk was much lower than that of the EPS-negative cheeses. Texture of the EPS-negative cheese was more affected by UF than that of the EPS-positive cheese. Differences were seen in the extent of flow between UF and non-UF cheeses at 1 and 3-months but not after 6 months ripening. Ultrafiltration increased the elastic modulus in the 6-month old EPS-positive cheeses. Higher body and texture scores were given to EPS-positive cheeses than the EPS-negative ones. Sensory panelists found the body of the UF and non-UF cheeses to be similar.

Reduced Fat Process Cheese Made from Young Reduced Fat Cheddar Cheese Manufactured with Exopolysaccharide-Producing Cultures

In a previous study, exopolysaccharide (EPS)-producing cultures improved textural and functional properties of reduced fat Cheddar cheese. Because base cheese has an impact on the characteristics of process cheese, we hypothesized that the use of EPS-producing cultures in making base reduced fat Cheddar cheese (BRFCC) would allow utilization of more young cheeses in making reduced fat process cheese. The objective of this study was to evaluate characteristics of reduced fat process cheese made from young BRFCC containing EPS as compared with those in cheese made from a 50/50 blend of young and aged EPS-negative cheeses. Reduced fat process cheeses were manufactured using young (2 d) or 1-mo-old EPS-positive or negative BRFCC. Moisture and fat of reduced fat process cheese were standardized to 49 and 21%, respectively. Enzyme modified cheese was incorporated to provide flavor of aged cheese. Exopolysaccharide-positive reduced fat process cheese was softer, less chewy and gummy, and exhibited lower viscoelastic moduli than the EPS-negative cheeses. The hardness, chewiness, and viscoelastic moduli were lower in reduced fat process cheeses made from 1-mo-old BRFCC than in the corresponding cheeses made from 2-d-old BRFCC. This could be because of more extensive proteolysis and lower pH in the former cheeses. Sensory scores for texture of EPS-positive reduced fat process cheeses were higher than those of the EPS-negative cheeses. Panelists did not detect differences in flavor between cheeses made with enzyme modified cheese and aged cheese. No correlations were found between the physical and melting properties of base cheese and process cheese.

Ultrafiltered Milk Reduces Bitterness in Reduced-Fat Cheddar Cheese Made with an Exopolysaccharide-Producing Culture

The objectives were to reduce bitterness in reduced-fat Cheddar cheese made with an exopolysaccharide (EPS)-producing culture and study relationships among ultra-filtration (UF), residual chymosin activity (RCA), and cheese bitterness. In previous studies, EPS-producing cultures improved the textural, melting, and viscoelastic properties of reduced-fat Cheddar cheese. However, the EPS-positive cheese developed bitterness after 2 to 3 mo of ripening due to increased RCA. We hypothesized that the reduced amount of chymosin needed to coagulate UF milk might result in reduced RCA and bitterness in cheese. Reduced-fat Cheddar cheeses were manufactured with EPS-producing and nonproducing cultures using skim milk or UF milk (1.2x) adjusted to a casein:fat ratio of 1.35. The EPS-producing culture increased moisture and RCA in reduced-fat Cheddar cheese. Lower RCA was found in cheese made from UF milk compared with that in cheese made from control milk. Ultrafiltration at a low concentration rate (1.2x) produced EPS-positive, reduced-fat cheese with similar RCA to that in the EPS-negative cheese. Slower proteolysis was observed in UF cheeses compared with non-UF cheeses. Panelists reported that UF EPS-positive cheese was less bitter than EPS-positive cheese made from control milk. This study showed that UF at a low concentration factor (1.2x) could successfully reduce bitterness in cheese containing a high moisture level. Because this technology reduced the RCA level (per g of protein) to a level similar to that in the control cheeses, the contribution of chymosin to cheese proteolysis would be similar in both cheeses.

Application of exopolysaccharide-producing cultures in reduced-fat Cheddar cheese: cryo-scanning electron microscopy observations

The microstructure of reduced- and full-fat Cheddar cheeses made with exopolysaccharide (EPS)-producing and nonproducing cultures was observed using cryo-scanning electron microscopy. Fully hydrated cheese samples were rapidly frozen in liquid nitrogen slush (-207 degrees C) and observed in their frozen hydrated state without the need for fat extraction. Different EPS-producing cultures were used in making reduced-fat Cheddar cheese. Full-fat cheese was made with a commercial EPS-nonproducing starter culture. The cryo-scanning electron micrographs showed that fat globules in the fully hydrated cheese were surrounded by cavities. Serum channels and pores in the protein network were clearly observed. Young (1-wk-old) full-fat cheese contained wide and long fat serum channels, which were formed because of fat coalescence. Such channels were not observed in the reduced-fat cheese. Young reduced-fat cheese made with EPS-nonproducing cultures contained fewer and larger pores than did reduced-fat cheese made with a ropy strain of Lactococcus lactis ssp. cremoris (JFR1), which had higher moisture levels. A 3-dimensional network of EPS was observed in large pores in cheese made with JFR1. Major changes in the size and distribution of pores within the structure of the protein network were observed in all reduced-fat cheeses, except that made with JFR1, as they aged. Changes in porosity were less pronounced in both the full-fat and the reduced-fat cheeses made with JFR1.

Application of Exopolysaccharide-Producing Cultures in Reduced-Fat Cheddar Cheese: Composition and Proteolysis

Proteolysis during ripening of reduced fat Cheddar cheeses made with different exopolysaccharide (EPS)-producing and nonproducing cultures was studied. A ropy strain of Lactococcus lactis ssp. cremoris (JFR1) and capsule-forming nonropy and moderately ropy strains of Streptococcus thermophilus were used in making reduced-fat Cheddar cheese. Commercial Cheddar starter was used in making full-fat cheese. Results showed that the actual yield of cheese made with JFR1 was higher than that of all other reduced-fat cheeses. Cheese made with JFR1 contained higher moisture, moisture in the nonfat substance, and residual coagulant activity than all other reduced-fat cheeses. Proteolysis, as determined by PAGE and the level of water-soluble nitrogen, was also higher in cheese made with JFR1 than in all other cheeses. The HPLC analysis showed a significant increase in hydrophobic peptides (causing bitterness) during storage of cheese made with JFR1. Cheese made with the capsule-forming nonropy adjunct of S. thermophilus, which contained lower moisture and moisture in the nonfat substance levels and lower chymosin activity than did cheese made with JFR1, accumulated less hydrophobic peptides. In conclusion, some EPS-producing cultures produced reduced-fat Cheddar cheese with moisture in the nonfat substance similar to that in its full-fat counterpart without the need for modifying the standard cheese-making protocol. Such cultures might accumulate hydrophobic (bitter) peptides if they do not contain the system able to hydrolyze them. For making high quality reduced-fat Cheddar cheese, EPS-producing cultures should be used in conjunction with debittering strains.

Effects of Exopolysaccharide-Producing Cultures on the Viscoelastic Properties of Reduced-Fat Cheddar Cheese

The objective was to study the influence of different exopolysaccharide (EPS)-producing and nonproducing lactic cultures on the viscoelastic properties of reduced-fat Cheddar cheese. Changes in the viscoelastic properties were followed over a ripening period of 6 mo. Results showed that the elastic, viscous, and complex moduli were higher in reduced-fat cheeses made with EPS-nonproducing cultures than in full-fat cheese. No differences in the viscoelastic properties were found between young reduced-fat cheese made with a ropy strain of Lactococcus lactis ssp. cremoris (JFR1) and its full-fat counterpart. Interestingly, the changes in viscoelastic moduli in both full-fat cheese and reduced-fat cheese made with JFR1 during ripening followed the same pattern. Whereas the moduli increased during the first month of ripening in those 2 cheeses, a dramatic decrease was observed in all other cheeses. Slopes of the viscoelastic moduli as a function of frequency were lower in the full-fat than in reduced-fat cheeses. The creep test showed that fresh reduced-fat cheese made with JFR1 was less rigid and more deformable than that made with EPS-nonproducing cultures. The creep and recovery properties of young reduced-fat cheese made with JFR1 and the full-fat type were similar. No differences were found in the viscoelastic properties between reduced-fat cheese made with no EPS and those made with EPS-producing adjunct cultures of Streptococcus thermophilus. After 6 mo of ripening, cheeses made with EPS-producing cultures maintained lower elastic and viscous moduli than did those made with no EPS.