Prospective multicenter assessment of risk factors for rod fracture following surgery for adult spinal deformity

Instrumentation Failure in Adult Spinal Deformity Patients

In recent years, advances in the surgical treatment of adult spinal deformity (ASD) have led to improved outcomes. Although these advances have helped drive the development of deformity surgery to meet the rising volume of patients seeking surgical treatment, many challenges have yet to be solved. Instrumentation failure remains one of the most common major complications following deformity surgery, associated with significant morbidity due to elevated re-operation rates among those experiencing mechanical complications. The two most frequently encountered subtypes of instrumentation failure are rod fracture (RF) and proximal junctional kyphosis/proximal junctional failure (PJK/PJF). While RF and PJK/PJF are both modes of instrumentation failure, they are two distinct entities with different clinical implications and treatment strategies. Considering that RF and PJK/PJF continue to represent a major challenge for patients with ASD and deformity surgeons alike, this review aims to discuss the incidence, risk factors, clinical impact, treatment strategies, preventive measures, and future research directions for each of these substantial complications.

Influence of smoking on patient-reported outcome measures (PROMs) in patients undergoing surgery for adult spinal deformity: a propensity score-matched analysis

PURPOSE

The purpose of this study was to determine the isolated influence of smoking in patient-reported outcome measures (PROMs) for adult spinal deformity (ASD) surgery excluding known tobacco-related complications.

METHODS

Retrospective analysis of a prospective multicenter ASD database. Patients operated on ASD with 2 year post-operative follow-up were included. Former smokers (non-active smokers) and patients developing mechanical or infectious complications were excluded. Changes of PROMs over time were analyzed using mixed models for repeated measures (MMRM). Propensity score matching (PSM) (1:1 ratio, caliper 0.10) was performed without replacement using optimum algorithm, tolerance ≤ 0.001, and estimated with 95% confidence interval (CI). PROMS in both groups were compared by paired t test or Wilcoxon signed-rank test.

RESULTS

692 out of 1246 surgical patients met our inclusion criteria. 153 smokers were matched with 153 non-smokers according to age, BMI, number of fused levels, and global tilt. After PSM both groups were homogeneous regarding baseline parameters, surgical data, and complications (mechanical complications and infection excluded). Smokers had worse baseline results for SRS-total, SRS-pain COMI-back, and ODI; smokers also showed worse 2-year outcomes for SRS-total, SRS-function, SRS-pain, SRS-self-image, and ODI. However, no differences between the two groups were found in the improvement from baseline to 2-year follow-up or in the timing of this improvement (MMRM). The proportion of patients reaching the minimal clinically important difference (MCID) after surgery was similar in the two groups, but the proportion of patients reaching patient acceptable symptom state (PASS) was significantly lower in smokers for SRS-Subtotal, SRS-function, and SRS-image.

CONCLUSION

Even in the absence of smoking-related complications, smokers had worse PROMs at baseline and 2 years after surgery with less patients achieving PASS, but similar degrees on improvement compared to non-smokers. The proportion achieving MCID was also similar between the two cohorts.

Effect of corrective stresses on rods in adult spinal deformity surgery-finite element analysis

BACKGROUND

The incidence of rod fracture after corrective surgery for adult spinal deformity (ASD) is high. Although many reports have investigated the effects of rod bending considering postoperative body motion, and countermeasures, there are no reports investigating the effects during intraoperative correction. The purpose of this study was to investigate the effect of ASD correction on rods by using finite element analysis (FEA) based on the rod shape changes before and after spinal corrective fusion.

METHODS

Five ASD patients (mean age 73 years, all female) who underwent thoracic to pelvic fusion were included in this study. A 3D rod model was created using computer-aided design software from digital images of the intraoperatively bended rod and intraoperative X-ray images after corrective fusion. The 3D model of the bent rod was meshed by dividing each of the screw head intervals into 20 sections and cross-section of the rod into 48 sections. Two surgical fusion methods of stepwise fixation as the cantilever method and parallel fixation as the translational method were simulated to evaluate stress and bending moments on the rods during intraoperative correction.

RESULTS

The stresses on the rods were 1500, 970, 930, 744, and 606 MPa in the five cases for stepwise fixation and 990, 660, 490, 508, and 437 MPa for parallel fixation, respectively, with parallel fixation having lower stresses in all cases. In all cases, maximum stress was found around the apex of the lumbar lordosis and near L5/S1. The bending moment was high around L2-4 in most cases.

CONCLUSIONS

The external forces of intraoperative correction had the greatest effect on the lower lumbar region, especially around the apex of the lumbar lordosis.

Post-operative bracing following adult spine deformity surgery: Results from the AO Spine surveillance of post-operative management of patients with adult spine deformity

STUDY DESIGN

Cross-sectional international survey with a literature review.

OBJECTIVES

While some surgeons favor spine bracing after surgery for adult spine deformity (ASD) to help prevent mechanical failures, there is a lack of evidence. The objective of the present study was to better understand the current trend in the use of bracing following ASD surgery based on an international survey.

METHODS

An e-mail-based online survey was conducted among over 6000 international AO Spine members regarding the post-operative management of patients with ASD. The details of brace prescription, indications and influencing factors were solicited. Descriptive data were summarized based on different demographic groups and fusion levels for the responding surgeons who annually perform at least 10 long-segment fusions of >5 levels extending to the pelvis.

RESULTS

A total of 116 responses were received, including 71 surgeons (61%) who used post-operative bracing for >5 levels of long fusion. The most common reason for bracing was pain management (55%) and bone quality was the strongest influencing factor (69%). Asia-Pacific surgeons had the highest rate of bracing (88%), while North American surgeons had the lowest (45%). The most common type of brace used were TLSO for cases with an uppermost instrumented vertebra (UIV) in the low- or mid-thoracic spine and a cervical brace for UIV at T1-3. The majority (56%) used bracing for 6-12 weeks after surgery.

CONCLUSIONS

The present survey demonstrated significant interest in bracing following ASD surgery, however, there is substantial variability in post-operative bracing practice. A formal study on the role of bracing in ASD surgery is needed.

Revision of Harrington rod constructs: a single-center's experience with this homogenous adult spinal deformity population at a minimum 2-year follow-up

PURPOSE

To evaluate radiographic and clinical outcomes following revision surgery after HRC fusions.

METHODS

Single-institution, retrospective study of patients revised following HRC with minimum 2-year follow-up post-revision. Demographics, perioperative information, radiographic parameters, complications, and Oswestry disability index (ODI) scores were collected. Radiographic parameters included global alignment, coronal and sagittal measurements pre and postoperatively, as well as final follow-up time points.

RESULTS

26 patients were included with a mean follow-up of 3.3 ± 1.1 years. Mean age was 55.5 ± 7.8 years, BMI 25.2 ± 5.8, and 22 (85%) were females. Instrumented levels increased from 9.7 ± 2.8 to 16.0 ± 2.2. Five (19.2%) patients underwent lumbar pedicle subtraction osteotomies, and 23 (88.4%) had interbody fusions. Patients significantly improved in all radiographic parameters at immediate and final follow-up (p < 0.005), except for thoracic kyphosis and pelvic incidence (p > 0.05). Correction was maintained from immediate postop to final follow-up (p > 0.05). 20 (76.9%) of patients experienced a complication at some point within the follow-up period with the most common being a lumbar nerve root deficit (n = 7). However, only one patient had a nerve root deficit at final follow-up, that being a 4/5 unilateral anterior tibialis function. 5 (19.2%) patients required further revision within a mean of 1.8 ± 1.1 years. On average, patients had an improvement in ODI score by final follow-up (35.6 ± 16.8 vs 25.4 ± 19.8, p = 0.035).

CONCLUSION

Patients revised for HRCs significantly improve, both clinically and radiographically by final follow-up. This group did have a propensity for distal lumbar root neurological issues, which were common but all patients except for one, recovered to full strength by two-year follow-up.

Digital Phenotyping, Wearables, and Outcomes

There is a significant need for robust and objective outcome assessments in spine surgery. Constant monitoring via smartphones and wearable devices has the potential to fill this role by providing an in-depth picture of human well-being, creating an unprecedented amount of objective data to augment clinical decision-making. The metrics obtained from continuous patient monitoring increase the amount and ecological validity of data relevant to spine surgery. This can provide physicians with patient and disease-specific medical information, facilitating personalized patient care.

Correlation Between Rod Fracture and Shear Stress: A Novel Parameter

BACKGROUND

We sought to assess the accuracy of a novel parameter proportional to the rod shear stress (RSS) in identifying patients at risk of rod fracture (RF) after surgery for correction of adult spinal deformity.

METHODS

We performed a retrospective medical record review of patients aged ≥18 years treated for adult spinal deformity between 2004 and 2014 with ≥24 months of follow-up. The primary outcome was RFs identified radiographically. Patient weight (w), number of instrumented levels (N), and minimum rod diameter (d) were recorded and used to calculate the RSS parameter (RSS=Nwd2). Receiver operating characteristic curves were produced and the area under the curve (AUC ± 95% confidence interval [CI]) was calculated to compare this parameter's discriminative accuracy to that of its constituent variables. The sensitivity, specificity, and likelihood ratios (LRs) were calculated.

RESULTS

A total of 28 RF-positive and 154 RF-negative patients were included. The average age was 59.2 ± 9.6 years, and 93.4% were women. The RSS parameter produced the greatest AUC (0.73 ± 0.11). At an RSS cutoff of 30.1, it achieved a sensitivity of 71.4% and specificity of 71.4% (LR, 2.5; 95% CI, 1.8-3.5). The number of instrumented levels produced the next-greatest AUC (0.65 ± 0.12), with a sensitivity of 78.6% and specificity of 50.0% at a cutoff of 15 (LR, 1.6; 95% CI, 1.2-2.0).

CONCLUSIONS

The RSS is calculated using easily obtainable information and shows potential as a tool for predicting patient-specific risk of RF after spinal fusion. The number of instrumented levels also correlates strongly with the occurrence of RFs and is not significantly less accurate than the RSS. A larger sample size and prospective validation would be useful in determining with greater confidence which parameter is superior for predicting RFs after spinal fusion.

Impact of multi-rod reinforcement on rod fractures in adult spinal deformity: A retrospective case series with a minimum follow up of 5 years

BACKGROUND

This study aimed to determine the impact of the multi-rod construct on rod fractures over a minimum follow-up period of five years in comparison to that with the conventional two-rod construct using the same technique, rod composition, and rod reinforcement method.

METHODS

Data were retrospectively retrieved from a prospectively collected, single-center database. Consecutive patients >50 years of age who underwent thoracopelvic corrective fusion with planned two-stage anterior-posterior surgery and were followed up for at least five years were included in this study. The incidence of rod fracture in the conventional two-rod and multi-rod groups was investigated.

RESULTS

A total of 58 patients (mean age, 68.9 years) were included in this study (follow-up rate, 73.4 %). Rod fracture was identified in 25 patients (43.1 %), within an average period of 25.1 months. The incidence of rod fracture in the multi-rod group was significantly lower than that in the two-rod group. However, there was no significant difference in the time to rod fracture between the two groups. Reinforcement of the multi-rod to the distal portion of the connector of the iliac screw had the lowest fracture rate and no cases of reoperation.

CONCLUSIONS

The incidence of rod fracture was significantly lower using multi-rod reinforcement, but the timing of rod fracture did not differ, compared to that with the two-rod construct using the same surgical technique and rod material. Multi-rod reinforcement covering the distal portion of the iliac screw is recommended to reduce the risk of fracture and reoperation.

Analysis of Rod Fracture at the Lumbosacral Junction Following Surgery for Adult Spinal Deformity

STUDY DESIGN

Retrospective study.

PURPOSE

This study aimed to investigate the differences in the characteristics of patients with rod fracture (RF) at the lumbosacral junction from those without RF following adult spinal deformity (ASD) surgery.

OVERVIEW OF LITERATURE

RF is a major complication following ASD surgery and may require reoperation because of pain and correction loss. The lumbosacral junction is a common RF site. However, risk factors for RFs at the lumbosacral junction remain unknown.

METHODS

The study included data from 100 patients who underwent ASD surgery between 2012 and 2020. Fifteen of these patients presented with RFs. Patient demographics, clinical outcomes, and radiographic parameters were evaluated in each group.

RESULTS

RFs were significantly more frequent in patients with a medical history of total hip arthroplasty (THA; p=0.01) or severe obesity (p=0.04). However, no significant differences in clinical outcomes, preoperative or postoperative measurements, or changes were found between pre- and postoperative radiographic parameters within the groups. Both pre- (p=0.01) and postoperative (p=0.02) anterior disc heights were significantly greater in the RF group than in the non-RF group. In the RF group, the postoperative lordotic angles of the lumbosacral junction significantly decreased compared with preoperative angles (p=0.02). Multiple logistic regression analysis demonstrated that a THA history (odds ratio, 34.2), severe obesity (odds ratio, 14.0), and preoperative anterior disc height (odds ratio, 1.2) were significant risk factors for RFs.

CONCLUSIONS

In this study, the greatest risk factors for postoperative lumbosacral RF after ASD surgery were THA history, severe obesity, and postoperative anterior disc height of ≥10. For patients at higher risk, the use of multirods is considered necessary.

A Standardized Curriculum Improves Trainee Rod Bending Proficiency in Spinal Deformity Surgery. Results of a Prospective Randomized Controlled Educational Study

INTRODUCTION

Surgical simulation is increasingly being accepted as a training platform to promote skill development and a safe surgical technique. Preliminary investigations in spine surgery show that simulation paired with educational intervention can markedly improve trainee performance. This study used a newly developed thoracolumbar fusion rod bending model to assess the effect of a novel educational curriculum and simulator training on surgical trainee rod bending speed and proficiency.

METHODS

Junior (PGY1 to 2) and senior (PGY3-fellow) surgical trainees at a single academic institution were prospectively enrolled in a rod bending simulation using a T7-pelvis spinal fusion model. Participants completed two simulations, with 1 month between first and second attempts. Fifty percent of surgeons in each training level were randomized to receive an educational curriculum (rod bending technique videos and unlimited simulator practice) between simulation attempts. Rod bending simulation proficiency was determined by the percentage of participants who completed the task (conclusion at 20 minutes), time to task completion or conclusion, and number of incomplete set screws at task conclusion. Participants completed a preparticipation and postparticipation survey. Univariate analysis compared rod bending proficiency and survey results between education and control cohorts.

RESULTS

Forty trainees (20 junior and 20 senior) were enrolled, with 20 participants randomized to the education and control cohorts. No notable differences were observed in the first simulation rod bending proficiency or preparticipation survey results between the education and control cohorts. In the second simulation, the education versus the control cohort demonstrated a significantly higher completion rate ( P = 0.01), shorter task time ( P = 0.009), fewer incomplete screws ( P = 0.003), and greater experience level ( P = 0.008) and comfort level ( P = 0.002) on postparticipation survey.

DISCUSSION

Trainees who participated in a novel educational curriculum and simulator training relative to the control cohort improved markedly in rod bending proficiency and comfort level. Rod bending simulation could be incorporated in existing residency and fellowship surgical skills curricula.

LEVEL OF EVIDENCE

I.

The "Sandwich" Extended Pedicle Subtraction Osteotomy for the Treatment of Fixed Sagittal Malalignment: Technical Description, Case Series, and Early Results With 2-Year Outcomes

BACKGROUND AND OBJECTIVES

Adult spinal deformity (ASD) with fixed sagittal malalignment (FSM) may require a pedicle subtraction osteotomy (PSO) for greater focal lordosis and restoration of global alignment. Despite growing trends in minimizing PSOs given their associated high risks, a considerable portion of patients with ASD still require a lumbar PSO most commonly because of iatrogenic flat back deformity. The purpose of this article is to describe a modified extended PSO technique with additional anterior column support coined the "sandwich" extended PSO (SE-PSO) to promote arthrodesis and report the outcomes in a consecutive case series.

METHODS

Patients with ASD treated with a lumbar SE-PSO at a single institution from 2015 to 2020 were analyzed. Complications, radiographic data, and patient-reported outcomes were compared preoperatively, at immediate postoperative follow-up, and at a 2-year postoperative follow-up (FU).

RESULTS

Fourteen patients who underwent revision operations for FSM were included. Improvements in segmental lordosis across the PSO site (14.8 ± 6.8 vs 39.9 ± 7.1, P < .0001), overall lumbar lordosis (14.6 ± 15.4 vs 44.6 ± 12.1, P < .0001), sacral slope (21.0 ± 10.5 31.1 ± 10.7, P = .0150), C7 sagittal vertical axis (140.1 ± 59.0 mm vs 35.9 ± 28.5, P < .0001), and spinopelvic mismatch (52.5 ± 21.3 vs 18.6 ± 14.1, P = .0001) were obtained in all patients. Eight patients experienced perioperative complications, with intraoperative durotomy being the most common (n = 7). Eight patients had a 2-year FU and demonstrated improvements in their segmental lordosis across the PSO site (14.3 ± 7.0 vs 41.3 ± 7.3, P = .0003), overall lumbar lordosis (8.7 ± 17.8 vs 46.1 ± 14.2, P = .0014), sacral slope (19.1 ± 12.8 vs 32.3 ± 12.5, P = .0479), C7 sagittal vertical axis (173.6 ± 54.4 mm vs 35.8 ± 30.0, P < .0001), and spinopelvic mismatch (63.0 ± 19.7 vs 21.1 ± 18.3, P < .0001), all of which were maintained at final FU (P > .05). At 2 years, a significant increase in Scoliosis Research Society-22r total score (2.5 ± 0.8 vs 3.6 ± 0.7, P = .0023 was reported. There were no reports of symptomatic pseudarthrosis or mechanical complications.

CONCLUSION

SE-PSO is an effective technique to correct FSM and is associated with low complications, improved patient-reported outcomes, and spinopelvic parameters that are maintained at 2 years.

Estimating the Cost of Spinopelvic Complications After Adult Spinal Deformity Surgery

Objective

Reoperations for spinopelvic failure after adult spinal deformity (ASD) surgery are common. We sought to determine the added costs of ASD surgery attributable to reoperations for spinopelvic construct failures.

Methods

We constructed a Markov process model to calculate the expected discounted 5-year costs of spinopelvic construct failures after ASD surgery. The Nationwide Inpatient Sample (NIS) was queried to estimate the number of ASD surgeries. Model inputs were based on literature review and expert opinion. ASD surgery was defined as thoracolumbar fusion of 4 or more levels with pelvic fixation. The following pelvic fixation failures were included: 1) rod fracture or pseudarthrosis from L4-S1, 2) iliac screw failure or set plug dislodgment, 3) iliac screw prominence, and 4) sacroiliac (SI) joint pain. The number of patients undergoing ASD surgery annually in the US was determined using a commercial claims database.

Results

The net present value 5-year cost per patient for spinopelvic complications was $35,265, equal to 29% of index surgery costs. Given an estimated 27,580 cases annually in the US, the additional cost to address spinopelvic complications reach nearly $1 billion over 5-years. A sensitivity analysis showed that these costs were most sensitive to the rate of rod fracture/pseudarthrosis, iliac screw prominence, and reoperation.

Conclusion

A conservative estimate of the cost of spinopelvic failures after ASD surgery is substantial, nearly $1 billion over 5-years. We propose a method of capturing spinopelvic fixation failures for use in future clinical studies and cost analyses.

Assessing Alignment Using GAP Score and Complications for Pedicle Subtraction Osteotomy Revision Surgeries for Sagittal Deformity in Previously Fused Spines Using a Satellite Rod Technique

OBJECTIVE

Pedicle subtraction osteotomy (PSO) is a surgical technique to restore lumbar lordosis in patients with rigid sagittal deformity. Herein, we report on outcomes of a surgical technique utilizing a 4-rod PSO with satellite rods.

METHODS

A retrospective study was performed for a cohort of patients who underwent 4-rod PSO revision surgery for sagittal deformity. Procedures were performed by one surgeon at 2 different academic centers between 2004-2018. Alignment outcomes and complications specifically for revision surgeries in previously fused spines were assessed.

RESULTS

40 patients underwent PSO with the satellite rod technique (n = 29 at L3, 72.5%; n = 7 at L4, 17.5%). Mean PSO angle was 28.7 ± 7.6°. Two patients (5%) had rod fracture necessitating revision surgery at 32 and 34 months. Three patients (7.5%) developed proximal junctional kyphosis (PJK), but none required revision. No patients developed pseudoarthrosis. Mean preoperative sagittal vertical axis (SVA) was 13.5 ± 7.3 cm, which decreased to 4.8 ± 7.3 cm (P = 0.002) postoperatively. Mean preoperative pelvic incidence-lumbar lordosis (PI-LL) mismatch improved from 35.9 ± 16.6° preoperatively to 11.8 ± 14.6° postoperatively (P < 0.001). Mean preoperative pelvic tilt (PT) improved from 34.7 ± 9.8° preoperatively to 30.1 ± 9.0° (P = 0.026) postoperatively. Mean global alignment and proportion (GAP) score improved from 10 ± 2 preoperatively to 8 ± 2 postoperatively (P < 0.001), which was still considered severely disproportioned.

CONCLUSIONS

Rod failure rate after PSO with the 4-rod satellite configuration was low. SVA, PI-LL mismatch, and PT significantly improved for these previously-fused patients. Mean GAP score also improved, but was still considered severely disproportioned, likely due to the inability of PSO to correct low LL or PT in previously-fused spines.

Advances and Evolving Challenges in Spinal Deformity Surgery

BACKGROUND

Surgical intervention is a critical tool to address adult spinal deformity (ASD). Given the evolution of spinal surgical techniques, we sought to characterize developments in ASD correction and barriers impacting clinical outcomes.

METHODS

We conducted a literature review utilizing PubMed, Embase, Web of Science, and Google Scholar to examine advances in ASD surgical correction and ongoing challenges from patient and clinician perspectives. ASD procedures were examined across pre-, intra-, and post-operative phases.

RESULTS

Several factors influence the effectiveness of ASD correction. Standardized radiographic parameters and three-dimensional modeling have been used to guide operative planning. Complex minimally invasive procedures, targeted corrections, and staged procedures can tailor surgical approaches while minimizing operative time. Further, improvements in osteotomy technique, intraoperative navigation, and enhanced hardware have increased patient safety. However, challenges remain. Variability in patient selection and deformity undercorrection have resulted in heterogenous clinical responses. Surgical complications, including blood loss, infection, hardware failure, proximal junction kyphosis/failure, and pseudarthroses, pose barriers. Although minimally invasive approaches are being utilized more often, clinical validation is needed.

CONCLUSIONS

The growing prevalence of ASD requires surgical solutions that can lead to sustained symptom resolution. Leveraging computational and imaging advances will be necessary as we seek to provide comprehensive treatment plans for patients.

Complications and Avoidance in Adult Spinal Deformity Surgery

Adult spinal deformity (ASD) is a complex disease that can result in significant disability. Although surgical treatment has been shown to be of benefit, the complication rate in the perioperative and postoperative periods can be as high as 70%. Some of the most common complications of ASD surgery include intraoperative cerebrospinal fluid leak, high blood loss, new neurologic deficit, hardware failure, proximal junctional kyphosis/failure, pseudarthrosis, surgical site infection, and medical complications. For each of these complications, one or more strategies can be utilized to avoid and/or minimize the consequences.

Rod angulation does not reflect sagittal curvature in adult spinal deformity surgery: comparison of lumbar lordosis and rod contouring

STUDY DESIGN

A retrospective study.

OBJECTIVE

Relationship between rod and spinal shape in the sagittal plane in adult spinal deformity (ASD) surgery.

BACKGROUND

Corrective surgery for adult spinal deformity (ASD) involves the use of contoured rods to correct and modify the spinal curvatures. Adequate rod bending is crucial for achieving optimal correction. The correlation between rods and spinal shape in long constructs has not been reported previously.

METHODS

We conducted a retrospective analysis of a prospective, multicenter database of patients who underwent surgery for ASD. The inclusion criteria were patients who underwent pelvic fixation and had an upper instrumented vertebra at or above T12. Pre- and post-operative standing radiographs were used to assess lumbar lordosis at the L4S1 and L1S1 levels. The angle between the tangents to the rod at the L1, L4, and S1 pedicles was calculated to determine the L4S1 and L1S1 rod lordosis. The difference between the lumbar lordosis (LL) and the rod lordosis (RL) was calculated as ΔL = LL-RL. The correlation between this difference (ΔL) and various characteristics was analyzed using descriptive and statistical methods.

RESULTS

Eighty-three patients were included in the study, resulting in 166 analyzed differences (ΔL) between the rod and spinal lordosis. The values for rod lordosis were found to be both greater and lesser than those of the spine but were mostly lower. The range for total ΔL was -24 °-30.9 °, with a mean absolute ΔL of 7.8 ° for L1S1 (standard deviation (SD) = 6.0) and 9.1 ° for L4S1 (SD = 6.8). In 46% of patients, both rods had a ΔL of over 5 °, and over 60% had at least one rod with a ΔL difference of over 5 °. Factors found to be related to a higher ΔL included postoperative higher lumbar lordosis, presence of osteotomies, higher corrected degrees, older age, and thinner rods. Multivariate analysis correlated only higher postoperative L1S1 lordosis with higher ΔL. No correlation was found between a higher ΔL and sagittal imbalance.

CONCLUSIONS

Variations between spinal and rod curvatures were observed despite the linear regression correlation. The shape of the rod does not seem to be predictive of the shape of the spine in the sagittal plane in ASD long-construct surgeries. Several factors, other than rod contouring, are involved in explaining the postoperative shape of the spine. The observed variation calls into question the fundamentals of the ideal rod concept.

Lumbar Pedicle Subtraction Osteotomy (PSO): A Novel Surgical Technique for Correction of Sagittal and Coronal Imbalance Using Laterally Based Satellite Rods

STUDY DESIGN

Operative video and supplemental manuscript.

OBJECTIVE

To present a novel step-by-step approach to performing a lumbar pedicle subtraction osteotomy (PSO) using laterally based satellite rods.

SUMMARY OF BACKGROUND DATA

Multi-rod constructs have demonstrated paramount for decreasing rates of pseudarthrosis after PSOs. Multi-rods constructs can be achieved using either "satellite" rods (rods not connected to the primary rods) and/or "accessory rods" (rods connected to the primary rods).

METHODS

A step-by-step approach to performing a lumbar PSO using a laterally based satellite rod configuration is provided through a case example and surgical technique video.

RESULTS

Lateral satellite rods can be particularly useful from a surgical perspective, as they provide temporary stabilization while the PSO is being performed, facilitate closure of the osteotomy site (symmetric and/or asymmetric), and serve as the final fixation rods across the PSO without needing to be exchanged.

CONCLUSIONS

Use of laterally based satellite rods is a useful technique for lumbar PSOs, as they provide temporary stabilization while the PSO is being performed, facilitate closure of the osteotomy site, and serve as the final fixation rods across the PSO without needing to be exchanged.

Posterior-based Osteotomies for Deformity Correction

Posterior-based osteotomies are crucial to the restoration of lordosis in adult spinal deformity. Posterior-column osteotomies are suited for patients with an unfused anterior column and non-focal sagittal deformity requiring modest correction in lordosis. When performed on multiple levels, posterior-column osteotomy may provide significant harmonious correction in patients who require more extensive correction. Pedicle subtraction osteotomy and vertebral column resection are appropriate for patients with a fused anterior column and more severe deformity, particularly focal and/or multiplanar deformity. The power of pedicle subtraction osteotomy and vertebral column resection to provide greater correction and to address multiplanar deformity comes at the cost of higher complication rates than posterior-column osteotomy.

Lumbar Disc Degeneration Affects the Risk of Rod Fracture Following PSO; A Finite Element Study

STUDY DESIGN

Finite element (FE) study.

OBJECTIVE

Pedicle subtraction osteotomy (PSO) is a surgical method to correct sagittal plane deformities. In this study, we aimed to investigate the biomechanical effects of lumbar disc degeneration on the instrumentation following PSO and assess the effects of using interbody spacers adjacent to the PSO level in a long instrumented spinal construct.

METHODS

A spinopelvic model (T10-pelvis) with PSO at the L3 level was used to generate 3 different simplified grades of degenerated lumbar discs (mild (Pfirrmann grade III), moderate (Pfirrmann grade IV), and severe (Pfirrmann grade V)). Instrumentation included eighteen pedicle screws and bilateral primary rods. To investigate the effect of interbody spacers, the model with normal disc height was modified to accommodate 2 interbody spacers adjacent to the PSO level through a lateral approach. For the models, the rods' stress distribution, PSO site force values, and the spine range of motion (ROM) were recorded.

RESULTS

The mildly, moderately, and severely degenerated models indicated approximately 10%, 26%, and 40% decrease in flexion/extension motion, respectively. Supplementing the instrumented spinopelvic PSO model using interbody spacers reduced the ROM by 22%, 21%, 4%, and 11% in flexion, extension, lateral bending, and axial rotation, respectively. The FE results illustrated lower von Mises stress on the rods and higher forces at the PSO site at higher degeneration grades and while using the interbody spacers.

CONCLUSIONS

Larger and less degenerated discs adjacent to the PSO site may warrant consideration for interbody cage instrumentation to decrease the risk of rod fracture and PSO site non-union.

Analysis of Mechanical Failure Using the GAP Score After Surgery With Lateral and Posterior Fusion for Adult Spinal Deformity

STUDY DESIGN

A retrospective observational study.

OBJECTIVE

The purpose of this study was to evaluate the Global Alignment and Proportion (GAP) score and mechanical failure (MF) following corrective fusion surgery with planned 2-stage surgery using lateral lumbar interbody fusion in patients with adult spinal deformity (ASD).

METHODS

Fifty-four patients (2 men, 52 females, aged 70.3 years) were included. MF, proximal junctional failure (PJF), and rod breakage (RB) occurred in 46.3% (25/54), 22.2% (12/54), and 29.6% (16/54) of patients, respectively. The immediate postoperative GAP scores were compared between patients with MF and without MF (MF+ and MF-, respectively). GAP scores in groups with and without PJF or RB were also compared.

RESULTS

Patients were grouped according to the GAP score for spinopelvic alignment: 23 (42.6%) as proportioned, 22 (40.7%) as moderately disproportioned, and 9 (16.7%) as severely disproportioned. The pre- and postoperative spinopelvic parameters did not differ significantly between the MF- and MF+ groups except pelvic incidence. Postoperatively, the mean pelvic incidence-lumbar lordosis changed to <10° in both groups. The GAP score and 3 categories of GAP scores did not differ significantly between the PJF- and PJF+ groups or between the RB+ and RB- groups.

CONCLUSION

Multiple factors can cause PJF and RB, and the patient's background may affect the ability to use the GAP score to predict MF. Further research may be needed in the future using modified GAP scores with additional factors in ASD patients.

Surgical Approaches and Short-Term Results of Circumferential Minimally Invasive Correction Surgery for Adult Idiopathic Scoliosis

OBJECTIVE

We present the surgical approaches and short-term (2 years postoperative) results pertaining to circumferential minimally invasive spine surgery (CMIS) with lateral lumbar interbody fusion (LLIF) and percutaneous pedicle screw application for adult idiopathic scoliosis (AS).

METHODS

We enrolled eight patients with AS who underwent CMIS (2018-2020) and examined the number of fused levels, upper instrumented vertebra, lower instrumented vertebra, number of LLIF-treated segments, number of preoperative intervertebral fusions, intraoperative blood loss, operative time, various spinopelvic parameters, Oswestry Disability Index, low back pain, visual analog scale (VAS), leg VAS, bone fusion rate, and perioperative complications.

RESULTS

The upper instrumented vertebra was T4, T7, T8, and T9 in two cases, whereas lower instrumented vertebra was the pelvis in all the cases. The average numbers of fixed vertebrae and segments that underwent LLIF were 13.3 ± 2.0 and 4.6 ± 0.7, respectively. All spinopelvic parameters improved significantly after surgery (thoracic kyphosis: P < 0.05, lumbar lordosis, cobb angle, pelvic tilt, pelvic incidence-lumbar lordosis, sagittal vertical axis: P < 0.001), and good alignment was achieved. The Oswestry Disability Index and VAS scores improved significantly (P < 0.001). The bone fusion rates achieved in the lumbosacral and thoracic spine were 100% and 88%, respectively. Only 1 patient showed postoperative coronal imbalance.

CONCLUSIONS

The 2-year postoperative results of CMIS for AS were good, and spontaneous bone fusion was confirmed in the thoracic spine without bone grafting. In this procedure, sufficient intervertebral release with LLIF and a percutaneous pedicle screw device translation technique enabled adequate global alignment correction. Therefore, correcting the global imbalance of the coronal and sagittal planes is more crucial than correcting scoliosis.

Impact of Navigation on 30-Day Outcomes for Adult Spinal Deformity Surgery

STUDY DESIGN

Retrospective database study.

OBJECTIVE

Navigation has been increasingly used to treat degenerative disease, with positive radiographic and clinical outcomes and fewer adverse events and reoperations, despite increased operative time. However, short-term analysis on treating adult spinal deformity (ASD) surgery with navigation is limited, particularly using large nationally represented cohorts. This is the first large-scale database study to compare 30-day readmission, reoperation, morbidity, and value-per-operative time for navigated and conventional ASD surgery.

METHODS

Adults were identified in the National Surgical Quality Improvement Program (NSQIP) database. Multivariate regression was used to compare outcomes between navigated and conventional surgery and to control for predictors and baseline differences.

RESULTS

3190 ASD patients were included. Navigated and conventional patients were similar. Navigated cases had greater operative time (405 vs 320 min) and mean RVUs per case (81.3 vs 69.7), and had more supplementary pelvic fixations (26.1 vs 13.4%) and osteotomies (50.3 vs 27.7%) (P <.001).In univariate analysis, navigation had greater reoperation (9.9 vs 5.2%, P = .011), morbidity (57.8 vs 46.8%, P = .007), and transfusion (52.2 vs 41.8%, P = .010) rates. Readmission was similar (11.9 vs 8.4%). In multivariate analysis, navigation predicted reoperation (OR = 1.792, P = .048), but no longer predicted morbidity or transfusion. Most reoperations were infectious and hardware-related.

CONCLUSIONS

Despite controlling for patient-related and procedural factors, navigation independently predicted a 79% increased odds of reoperation but did not predict morbidity or transfusion. Readmission was similar between groups. This is explained, in part, by greater operative time and transfusion, which are risk factors for infection. Reoperation most frequently occurred for wound- and hardware-related reasons, suggesting navigation carries an increased risk of infectious-related events beyond increased operative time.

The lower Osteotomy Level is Associated With Decreased Revision Surgery Due to Mechanical Complications After Three-Column Osteotomy in Patients With Adult Spinal Deformity: A Multi-Institutional Retrospective Study

STUDY DESIGN

A multi-institutional retrospective study.

OBJECTIVES

To investigate risk factors of mechanical failure in three-column osteotomy (3COs) in patients with adult spinal deformity (ASD), focusing on the osteotomy level.

METHODS

We retrospectively reviewed 111 patients with ASD who underwent 3COs with at least 2 years of follow-up. Radiographic parameters, clinical data on early and late postoperative complications were collected. Surgical outcomes were compared between the low-level osteotomy group and the high-level osteotomy group: osteotomy level of L3 or lower group (LO group, n = 60) and osteotomy of L2 or higher group (HO group, n = 51).

RESULTS

Of the 111 patients, 25 needed revision surgery for mechanical complication (mechanical failure). A lower t-score (odds ratio [OR] .39 P = .002) and being in the HO group (OR 4.54, P = .03) were independently associated with mechanical failure. In the analysis divided by the osteotomy level (LO and HO), no difference in early complications or neurological complications was found between the two groups. The rates of overall mechanical complications, rod failure, and mechanical failure were significantly higher in the HO group than in the LO group. After propensity score matching, mechanical complications and failures were still significantly more observed in the HO group than in the LO group (P = .01 and .029, respectively).

CONCLUSIONS

A lower t-score and osteotomy of L2 or higher were associated with increased risks of mechanical failure. Lower osteotomy was associated with better correction of sagittal balance and a lower rate of mechanical complications.

Fragility of L5 Vertebral Fracture After Rod Fracture at the Lumbosacral Junction Following Long-Segment Spinal Fusion Surgery for Adult Spine Deformity

We report a case of vertebral fracture in a patient with rod fractures after adult spinal deformity surgery, which occurred at the same level as the rod fractures, even though intervertebral bone fusion in the fusion range had been achieved. A 77-year-old female underwent corrective spinal surgery for adult spinal deformity from T12 to the pelvis but had a subsequent uppermost instrumented vertebral fracture, resulting in pseudarthrosis and severe kyphosis. The patient underwent proximal fusion extension to the T4, which improved alignment. A right-sided rod fracture at the lumbosacral junction occurred after 18 months; however, it showed no symptoms. After a month, the patient experienced severe low back pain with left leg pain and was diagnosed with bilateral rod fractures associated with L5 hyperextension vertebral fracture. The patient underwent revision surgery to repair the fractured rods with a multiple-rod construct. Rod fractures can occur even when bone fusion is achieved within the fusion range. When rod fractures are detected at the lumbosacral junction even if the interbody fusion was achieved, a hyperextension vertebral fracture may occur.

Demineralized cortical fibers are associated with a low pseudarthrosis rate in patients undergoing surgery for adult spinal deformity without three-column osteotomy

Introduction

Following surgical treatment for adult spinal deformity (ASD) there is an increased risk of revision surgery due to mechanical failure or pseudarthrosis. Demineralized cortical fibers (DCF) were introduced at our institution aiming to reduce the risk of pseudarthrosis after ASD surgery.

Research question

We wanted to investigate the effect of DCF on postoperative pseudarthrosis compared with allogenic bone graft in ASD surgery without three-column osteotomies (3CO).

Materials & Methods

All patients undergoing ASD surgery between January 1, 2010 to June 31, 2020 were included in this interventional study with historical controls. Patients with current or previous 3CO were excluded. Before February 1, 2017, patients undergoing surgery received auto- and allogenic bone graft (non-DCF group) whilst patients after received DCF in addition to autologous bone graft (DCF group). Patients were followed for at least two years. The primary outcome was radiographic or CT-verified postoperative pseudarthrosis requiring revision surgery.

Results

We included 50 patients in the DCF group and 85 patients in the non-DCF group for final analysis. Pseudarthrosis requiring revision surgery at two-year follow-up occurred in seven (14%) patients in the DCF group compared with 28 (33%) patients in the non-DCF group (p ​= ​0.016). The difference was statistically significant, corresponding to a relative risk of 0.43 (95%CI: 0.21-0.94) in favor of the DCF group.

Conclusion

We assessed the use of DCF in patients undergoing ASD surgery without 3CO. Our results suggest that the use of DCF was associated with a considerable decreased risk of postoperative pseudarthrosis requiring revision surgery.

Peripheral cortical bone density predicts vertebral bone mineral properties in spine fusion surgery patients

Spine fusion surgery is one of the most common orthopedic procedures, with over 400,000 performed annually to correct deformities and pain. However, complications occur in approximately one third of cases. While many of these complications may be related to poor bone quality, it is difficult to detect bone abnormalities prior to surgery. Areal BMD (aBMD) assessed by DXA may be artifactually high in patients with spine pathology, leading to missed diagnosis of deficits. In this study, we related preoperative imaging characteristics of both central and peripheral sites to direct measurements of bone quality in vertebral biopsies. We hypothesized that pre-operative imaging outcomes would relate to vertebral bone mineralization and collagen properties. Pre-operative assessments included DXA measurements of aBMD of the spine, hip, and forearm, central quantitative computed tomography (QCT) of volumetric BMD (vBMD) at the lumbar spine, and high resolution peripheral quantitative computed tomography (HRpQCT; Xtreme CT2) measurements of vBMD and microarchitecture at the distal radius and tibia. Bone samples were collected intraoperatively from the lumbar vertebrae and analyzed using Fourier-transform Infrared (FTIR) spectroscopy. Bone samples were obtained from 23 postmenopausal women (mean age 67 ± 7 years, BMI 28 ± 8 kg/m2). We found that patients with more mature bone by FTIR, measured as lower acid phosphate content and carbonate to phosphate ratio, and greater collagen maturity and mineral maturity/crystallinity (MMC), had greater cortical vBMD at the tibia and greater aBMD at the lumbar spine and one-third radius. Our data suggests that bone quality at peripheral sites may predict bone quality at the spine. As bone quality at the spine is challenging to assess prior to surgery, there is a great need for additional screening tools. Pre-operative peripheral bone imaging may provide important insight into vertebral bone quality and may foster identification of patients with bone quality deficits.

Rod fractures in thoracolumbar fusions to the sacrum/pelvis for adult symptomatic lumbar scoliosis: long-term follow-up of a prospective, multicenter cohort of 160 patients

OBJECTIVE

Previous reports of rod fracture (RF) in adult spinal deformity are limited by heterogeneous cohorts, low follow-up rates, and relatively short follow-up durations. Since the majority of RFs present > 2 years after surgery, true occurrence and revision rates remain unclear. The objectives of this study were to better understand the risk factors for RF and assess its occurrence and revision rates following primary thoracolumbar fusions to the sacrum/pelvis for adult symptomatic lumbar scoliosis (ASLS) in a prospective series with long-term follow-up.

METHODS

Patient records were obtained from the Adult Symptomatic Lumbar Scoliosis-1 (ASLS-1) database, an NIH-sponsored multicenter, prospective study. Inclusion criteria were as follows: patients aged 40-80 years undergoing primary surgeries for ASLS (Cobb angle ≥ 30° and Oswestry Disability Index ≥ 20 or Scoliosis Research Society-22r ≤ 4.0 in pain, function, and/or self-image) with instrumented fusion of ≥ 7 levels that included the sacrum/pelvis. Patients with and without RF were compared to assess risk factors for RF and revision surgery.

RESULTS

Inclusion criteria were met by 160 patients (median age 62 years, IQR 55.7-67.9 years). At a median follow-up of 5.1 years (IQR 3.8-6.6 years), there were 92 RFs in 62 patients (38.8%). The median time to RF was 3.0 years (IQR 1.9-4.54 years), and 73% occurred > 2 years following surgery. Based on Kaplan-Meier analyses, estimated RF rates at 2, 4, 5, and 8 years after surgery were 11%, 24%, 35%, and 49%, respectively. Baseline radiographic, clinical, and demographic characteristics were similar between patients with and without RF. In Cox regression models, greater postoperative pelvic tilt (HR 1.895, 95% CI 1.196-3.002, p = 0.0065) and greater estimated blood loss (HR 1.02, 95% CI 1.005-1.036, p = 0.0088) were associated with increased risk of RF. Thirty-eight patients (61% of all RFs) underwent revision surgery. Bilateral RF was predictive of revision surgery (HR 3.52, 95% CI 1.8-6.9, p = 0.0002), while patients with unilateral nondisplaced RFs were less likely to require revision (HR 0.39, 95% CI 0.18-0.84, p = 0.016).

CONCLUSIONS

This study provides what is to the authors' knowledge the highest-quality data to date on RF rates following ASLS surgery. At a median follow-up of 5.1 years, 38.8% of patients had at least one RF. Estimated RF rates at 2, 4, 5, and 8 years after surgery were 11%, 24%, 35%, and 49%, respectively. Greater estimated blood loss and postoperative pelvic tilt were significant risk factors for RF. These findings emphasize the importance of long-term follow-up to realize the true prevalence and cumulative incidence of RF.

Factors associated with hardware failure after lateral thoracolumbar fusions - A ten year case series

OBJECTIVE

Thoracolumbar lateral interbody fusions (tLLIF) are one tool in the spine surgeon's toolbox to indirectly decompress neuroforamina while also improving segmental lordosis in a biomechanically distinct manner from posterior fusions. When part of a concomitant posterior construct, hardware failure (HF), sometimes requiring revision surgery, can occur. We sought to study the relationship between tLLIF and HF.

METHODS

We conducted a retrospective study on consecutive patents who underwent tLLIF at a single academic center between January 2012 and December 2021 by seven unique neurosurgeons. Patients were excluded if they had no posterior instrumentation within their construct or if they had less than six months of follow-up. Hardware failure was defined as screw breakage or rod fracture seen on postoperative imaging.

RESULTS

232 patients were identified; 6 (2.6 %) developed HF throughout a mean follow-up of 1182 days (range =748-1647 days). Adjacent segment disease was the most common pathology addressed (75 patients (32.3 %)). The amount of posterior instrumentation both in the surgery in question and in the total construct were significantly higher in the HF cohort (4.33 ± 1.52 levels, 5.83 ± 3.36 levels) versus the non-HF cohort (2.08 ± 0.296 levels, p = 0.014; 2.86 ± 0.316 levels, p = 0.003, respectively). The number of interbody devices added in the index surgery and in the entire construct were both significantly higher in the HF cohort (3.33 ± 0.666 interbody devices, 3.33 ± 0.666 devices) than in the non-HF cohort (1.88 ± 0.152 interbody devices, p = 0.002; 2.31 ± 0.158 devices, p = 0.036, respectively). Higher amounts of lateral levels of fusion approached significance for association with HF (HF: 2.67 ± 0.844 levels, no HF: 1.73 ± 1.26 levels, p = 0.076). On multivariate analysis, only the number of interbody devices added in the index surgery was predictive of HF (Odds ratio=2.3, 95 % confidence interval=1.25-4.23, p = 0.007).

CONCLUSION

Greater levels of posterior fusion, and greater numbers of interbody devices in an index surgery and in a construct as a whole, were associated with higher rates of HF in our cohort of patients with tLLIF. Greater numbers of lateral segments fused in this population may also be related to HF.

Does number of rods matter? 4-, 5-, and 6-rods across a lumbar pedicle subtraction osteotomy: a finite element analysis

PURPOSE

To assess biomechanics of a lumbar PSO stabilized with different multi-rod constructs (4-, 5-, 6-rods) using satellite and accessory rods.

METHODS

A validated spinopelvic finite element model with a L3 PSO was used to evaluate the following constructs: 2 primary rods T10-pelvis ("Control"), two satellite rods (4-rod), two satellite rods + one accessory rod (5-rod), or two satellite rods + two accessory rods (6-rod). Data recorded included: ROM T10-S1 and L2-L4, von Mises stresses on primary, satellite, and accessory rods, factor of safety yield stress, and force across the PSO surfaces. Percent differences relative to Control were calculated.

RESULTS

Compared to Control, 4-rods increased PSO flexion and extension. Lower PSO ROMs were observed for 5- and 6-rods compared to 4-rods. However, 4-rod (348.6 N) and 5-rod (343.2 N) showed higher PSO forces than 2-rods (336 N) and 6-rods had lower PSO forces (324.2 N). 5- and 6-rods led to the lowest rod von Mises stresses across the PSO. 6-rod had the maximum factor of safety on the primary rods.

CONCLUSIONS

In this finite element analysis, 4-rods reduced stresses on primary rods across a lumbar PSO. Although increased rigidity afforded by 5- and 6-rods decreased rod stresses, it resulted in less load transfer to the anterior vertebral column (particularly for 6-rod), which may not be favorable for the healing of the anterior column. A balance between the construct's rigidity and anterior load sharing is essential.

The validation study of preoperative surgical planning for corrective target in adult spinal deformity surgery with 5-year follow-up for mechanical complications

PURPOSE

We used the Hamamatsu formula as an indicator of correction goals in surgery for adult spinal deformity (ASD). However, it is reported that correction according to Global Alignment and Proportion (GAP) score and the Roussouly algorithm reduces implant-related complications. The purpose of this study was to validate three preoperative plannings for the incidence of complications.

METHODS

Patients who underwent ASD surgery and followed up for 5 years were included. The Hamamatsu formula was also divided into three groups: ideal (I), moderate (M), and under (U). The GAP score was divided into three groups: proportioned (P), moderately disproportioned (MD), and severely disproportioned (SD). Patients who met the postoperative Roussouly classification algorithm were defined as the restored (R) group and those who did not were defined as the non-restored (NR) group. Proximal junctional kyphosis (PJK) and rod fractures were investigated.

RESULTS

In the Hamamatsu formula, there were 51, 108, and 44 patients in Groups I, M, and U, respectively, with no significant differences in their complications. In the GAP score, there were 45, 71, and 87 patients in the P, MD, and SD group, respectively, with no significant differences in their complications. In the Roussouly classification, there were 102 and 101 patients in the R and NR group, respectively, with a significant difference in their complication rate (R/NR = 51%:70%; P = 0.005). PJK was significantly lower in the R group (R/NR = 15%:30%; P = 0.010).

CONCLUSION

Correction according to the Roussouly algorithm is useful for the prevention of mechanical complications, especially PJK.

Factors influencing complications after 3-columns spinal osteotomies for fixed sagittal imbalance from multiple etiologies: a multicentric cohort study about 286 cases in 273 patients

PURPOSE

Spinal osteotomies performed to treat fixed spinal deformities are technically demanding and associated with a high complications rate. The main purpose of this study was to analyze complications and their risk factors in spinal osteotomies performed for fixed sagittal imbalance from multiple etiologies.

METHODS

The study consisted of a blinded retrospective analysis of prospectively collected data from a large multicenter cohort of patients who underwent 3-columns (3C) spinal osteotomy, between January 2010 and January 2017. Clinical and radiological data were compared pre- and post-operatively. Complications and their risk factors were analyzed.

RESULTS

Two hundred eighty-six 3C osteotomies were performed in 273 patients. At 1 year follow-up, both clinical (VAS pain, ODI and SRS-22 scores) and radiological (SVA, SSA, loss of lordosis and pelvic version) parameters were significantly improved (p < 0.001). A total of 164 patients (59.2%) experienced at least 1 complication (277 complications). Complications-free survival rates were only 30% at 5 years. Most of those were mechanical (35.2%), followed by general (17.6%), surgical site infection (17.2%) and neurological (10.9%). Pre-operative neurological status [RR = 2.3 (1.32-4.00)], operative time (+ 19% of risk each additional hour) and combined surgery [RR = 1.76 (1.08-2.04)] were assessed as risk factors for overall complication (p < 0.05). The use of patient-specific rods appeared to be significantly associated with less overall complications [RR = 0.5 (0.29-0.89)] (p = 0.02).

CONCLUSION

Spinal 3C osteotomies were efficient to improve both clinical and radiological parameters despite high rates of complication. Efforts should be made to reduce operative time which appears to be the strongest predictive risk factor for complication.

Surgical site infection is a major risk factor of pseudarthrosis in adult spinal deformity surgery

BACKGROUND CONTEXT

Despite the evidence in appendicular skeletal surgery, the effect of infection on spinal fusion remains unclear, particularly after Adult Spinal Deformity (ASD) surgery.

PURPOSE

The purpose of this study was to determine the impact of surgical site infection (SSI) in ASD surgery fusion rates and its association with other risks factors of pseudarthrosis.

STUDY DESIGN

We conducted an international multicenter retrospective study on a prospective cohort of patients operated for spinal deformity.

PATIENT SAMPLE

A total of 956 patients were included (762 females and 194 males).

OUTCOME MEASURES

Patient's preoperative characteristics, pre and postoperative spinopelvic parameters, surgical variables, postoperative complications and were recorded. Surgical site infections were asserted in case of clinical signs associated with positive surgical samples. Each case was treated with surgical reintervention for debridement and irrigation. Presence of pseudarthrosis was defined by the association of clinical symptoms and radiological signs of nonfusion (either direct evidence on CT-scan or indirect radiographic clues such as screw loosening, rod breakage, screw pull out or loss of correction). Each iterative surgical intervention was collected.

METHODS

Univariate and multivariate analysis with logistic regression models were performed to evaluate the role of risk factors of pseudarthrosis.

RESULTS

Nine hundred fifty-six surgical ASD patients with more than two years of follow-up were included in the study. 65 of these patients were treated for SSI (6.8%), 138 for pseudarthrosis (14.4%), and 28 patients for both SSI and pseudarthrosis. On multivariate analysis, SSI was found to be a major risk factor of pseudarthrosis (OR=4.4; 95% CI=2.4,7.9) as well as other known risks factors: BMI (OR=1.1; 95% CI=1.0,1.1), smoking (OR=1.6; 95% CI=1.1,2.9), performance of Smith-Petersen osteotomy (OR = 1.6; 95% CI 1.0,2.6), number of vertebrae instrumented (OR=1.1; 95% CI=1.1,1.2) and the caudal level of fusion, with a distal exponential increment of the risk (OR max for S1=6, 95% CI=1.9,18.6).

CONCLUSION

SSI significantly increases the risk of pseudarthrosis with an OR of 4.4.

Operative treatment outcomes for adult cervical deformity: a prospective multicenter assessment with mean 3-year follow-up

OBJECTIVE

Adult cervical deformity (ACD) has high complication rates due to surgical complexity and patient frailty. Very few studies have focused on longer-term outcomes of operative ACD treatment. The objective of this study was to assess minimum 2-year outcomes and complications of ACD surgery.

METHODS

A multicenter, prospective observational study was performed at 13 centers across the United States to evaluate surgical outcomes for ACD. Demographics, complications, radiographic parameters, and patient-reported outcome measures (PROMs; Neck Disability Index, modified Japanese Orthopaedic Association, EuroQol-5D [EQ-5D], and numeric rating scale [NRS] for neck and back pain) were evaluated, and analyses focused on patients with ≥ 2-year follow-up.

RESULTS

Of 169 patients with ACD who were eligible for the study, 102 (60.4%) had a minimum 2-year follow-up (mean 3.4 years, range 2-8.1 years). The mean age at surgery was 62 years (SD 11 years). Surgical approaches included anterior-only (22.8%), posterior-only (39.6%), and combined (37.6%). PROMs significantly improved from baseline to last follow-up, including Neck Disability Index (from 47.3 to 33.0) and modified Japanese Orthopaedic Association score (from 12.0 to 12.8; for patients with baseline score ≤ 14), neck pain NRS (from 6.8 to 3.8), back pain NRS (from 5.5 to 4.8), EQ-5D score (from 0.74 to 0.78), and EQ-5D visual analog scale score (from 59.5 to 66.6) (all p ≤ 0.04). More than half of the patients (n = 58, 56.9%) had at least one complication, with the most common complications including dysphagia, distal junctional kyphosis, instrumentation failure, and cardiopulmonary events. The patients who did not achieve 2-year follow-up (n = 67) were similar to study patients based on baseline demographics, comorbidities, and PROMs. Over the course of follow-up, 23 of the total 169 enrolled patients were reported to have died. Notably, these represent all-cause mortalities during the course of follow-up.

CONCLUSIONS

This multicenter, prospective analysis demonstrates that operative treatment for ACD provides significant improvement of health-related quality of life at a mean 3.4-year follow-up, despite high complication rates and a high rate of all-cause mortality that is reflective of the overall frailty of this patient population. To the authors' knowledge, this study represents the largest and most comprehensive prospective effort to date designed to assess the intermediate-term outcomes and complications of operative treatment for ACD.

Use of graft materials and biologics in spine deformity surgery: a state-of-the-art review

PURPOSE

The aim of the current review is to summarize the current evidence on graft materials used in fusion procedures for spinal deformity corrections.

METHODS

PubMed, Embase, and Cochrane Library were searched for relevant published observational studies and clinical trials using osteobiologics and biomaterials in spinal deformity surgery.

RESULTS

The use of autograft in deformity correction surgeries has been reported in a limited number of studies, with the harvest sites including iliac crest, ribs, and local bone. Various allografts and biologics have been used in the treatment of spinal deformities including idiopathic and degenerative scoliosis, either as stand alone or in combination with autograft. Limited number of studies reported no differences in fusion rates or outcomes. Use of rh-BMP2 in anterior, posterior or front/back approaches showed higher fusion rates than other graft materials in patients with spinal deformities. Due to the limited number of quality studies included in the review, as well as alternative factors, such as costs, availability, and surgeon expertise/preference, no definitive conclusion or recommendations can be made as to the ideal graft choice in spinal deformity surgery.

CONCLUSIONS

Most commonly used grafts included autograft, allograft and rh-BMP2, with new biologics and biomaterials constantly emerging in the market. Limited number of high-quality comparative studies and heterogeneity in study design prevented direct comparisons that can lead to meaningful recommendations. Further studies are needed to prove superiority of any single graft material and/or biologic that is also cost-effective and safe.

Biomechanical comparison of multi-rod constructs by satellite rod configurations (in-line vs. lateral) and screw types (monoaxial vs. polyaxial) spanning a lumbar pedicle subtraction osteotomy (PSO): is there an optimal configuration?

PURPOSE

Multi-rod constructs are used commonly to stabilize pedicle subtraction osteotomies (PSO). This study aimed to evaluate biomechanical properties of different satellite rod configurations and effects of screw-type spanning a PSO.

METHODS

A validated 3D spinopelvic finite element model with a L3 PSO (30°) was used to evaluate 5 models: (1) Control (T10-pelvis + 2 rods); (2) lateral satellite rods connected via offsets to monoaxial screws (LatSat-Mono) or (3) polyaxial screws (LatSat-Poly); (4) in-line satellite rods connected to monoaxial screws (InSat-Mono) or (4) polyaxial screws (InSat-Poly). Global and PSO range of motions (ROM) were recorded. Rods' von Mises stresses and PSO forces were recorded and the percent differences from Control were calculated.

RESULTS

All satellite rods (save InSat-Mono) increased PSO ROM and decreased primary rods' von Mises stresses at the PSO. Lateral rods increased PSO forces (LatSat-Mono:347.1 N; LatSat-Poly:348.6 N; Control:336 N) and had relatively lower stresses, while in-line rods decreased PSO forces (InSat-Mono:280.1 N; InSat-Poly:330.7 N) and had relatively higher stresses. Relative to polyaxial screws, monoaxial screws further decreased PSO ROM, increased satellite rods' stresses, and decreased PSO forces for in-line rods, but did not change PSO forces for lateral rods.

CONCLUSION

Multi-rod constructs using in-line and lateral satellite rods across a PSO reduced primary rods' stresses. Subtle differences in biomechanics suggest lateral satellite rods, irrespective of screw type, increase PSO forces and lower rod stresses compared to in-line satellite rods, which had a high degree of posterior instrumentation stress shielding and lower PSO forces. Clinical studies are warranted to determine if these findings influence clinical outcomes.

Systematic review and meta-analysis for the impact of rod materials and sizes in the surgical treatment of adult spine deformity

PURPOSE

To assess clinical and safety outcomes associated with different rod materials and diameters in adult spinal deformity (ASD) surgery.

METHODS

A systematic literature review and meta-analysis evaluated ASD surgery using pedicle screw fixation systems with rods of different materials and sizes. Postoperative outcomes (i.e., Cobb, sagittal vertical axis, and pelvic tilt angle) and complications (i.e., pseudarthrosis and rod breakage) were assessed. Random effects models (REMs) pooled data for outcomes reported in ≥ 2 studies.

RESULTS

Among 50 studies evaluating ASD surgery using pedicle screw fixation systems, 17 described rod material/diameter. Postoperative outcomes did not statistically differ between cobalt-chromium (CoCr) vs. titanium (Ti) rods (n = 2 studies; mean [95% confidence interval (CI)] sagittal vertical axis angle: CoCr 37.00° [18.58°-55.42°] and Ti 32.58° [24.62°-40.54°]; mean [95% CI] pelvic tilt angle: CoCr 26.20° [22.87°-29.53°] and Ti 20.15° [18.0°-22.31°]). The pooled proportion (95% CI) of pseudarthrosis was 15% (7-22%) for CoCr and 12% (- 8-32%) for stainless steel (SS) (n = 2 studies each; Chi2 = 0.07, p = 0.79). The pooled proportion (95% CI) of broken rods was 12% (1-22%) for Ti (n = 3 studies) and 10% (2-19) for CoCr (n = 1 study). Among 6.0-6.35 mm rods, the pooled (95% CI) postoperative Cobb angle (n = 2) was 12.01° (9.75°-14.28°), sagittal vertical axis angle (n = 4) was 35.32° (30.02°-40.62°), and pelvic tilt angle was 21.11° (18.35°-23.86°).

CONCLUSIONS

For ASD patients undergoing posterior fixation and fusion, there are no statistically significant differences in postoperative outcomes or complications among rods of varying materials and diameters. Benchmark postsurgical outcomes and complication rates by rod material and diameter are provided.

LEVEL OF EVIDENCE

III.

Patient-Reported Outcomes After Complex Adult Spinal Deformity Surgery: 5-Year Results of the Scoli-Risk-1 Study

STUDY DESIGN

Prospective cohort.

OBJECTIVE

To prospectively evaluate PROs up to 5-years after complex ASD surgery.

METHODS

The Scoli-RISK-1 study enrolled 272 ASD patients undergoing surgery from 15 centers. Inclusion criteria was Cobb angle of >80°, corrective osteotomy for congenital or revision deformity, and/or 3-column osteotomy. The following PROs were measured prospectively at intervals up to 5-years postoperative: ODI, SF36-PCS/MCS, SRS-22, NRS back/leg. Among patients with 5-year follow-up, comparisons were made from both baseline and 2-years postoperative to 5-years postoperative. PROs were analyzed using mixed models for repeated measures.

RESULTS

Seventy-seven patients (28.3%) had 5-year follow-up data. Comparing baseline to 5-year data among these 77 patients, significant improvement was seen in all PROs: ODI (45.2 vs. 29.3, P < 0.001), SF36-PCS (31.5 vs. 38.8, P < 0.001), SF36-MCS (44.9 vs. 49.1, P = 0.009), SRS-22-total (2.78 vs. 3.61, P < 0.001), NRS-back pain (5.70 vs. 2.95, P < 0.001) and NRS leg pain (3.64 vs. 2.62, P = 0.017). In the 2 to 5-year follow-up period, no significant changes were seen in any PROs. The percentage of patients achieving MCID from baseline to 5-years were: ODI (62.0%) and the SRS-22r domains of function (70.4%), pain (63.0%), mental health (37.5%), self-image (60.3%), and total (60.3%). Surprisingly, mean values (P > 0.05) and proportion achieving MCID did not differ significantly in patients with major surgery-related complications compared to those without.

CONCLUSIONS

After complex ASD surgery, significant improvement in PROs were seen at 5-years postoperative in ODI, SF36-PCS/MCS, SRS-22r, and NRS-back/leg pain. No significant changes in PROs occurred during the 2 to 5-year postoperative period. Those with major surgery-related complications had similar PROs and proportion of patients achieving MCID as those without these complications.

Failure in Adult Spinal Deformity Surgery: A Comprehensive Review of Current Rates, Mechanisms, and Prevention Strategies

STUDY DESIGN

Literature review.

OBJECTIVE

The aim of this review is to summarize recent literature on adult spinal deformity (ASD) treatment failure as well as prevention strategies for these failure modes.

SUMMARY OF BACKGROUND DATA

There is substantial evidence that ASD surgery can provide significant clinical benefits to patients. The volume of ASD surgery is increasing, and significantly more complex procedures are being performed, especially in the aging population with multiple comorbidities. Although there is potential for significant improvements in pain and disability with ASD surgery, these procedures continue to be associated with major complications and even outright failure.

METHODS

A systematic search of the PubMed database was performed for articles relevant to failure after ASD surgery. Institutional review board approval was not needed.

RESULTS

Failure and the potential need for revision surgery generally fall into 1 of 4 well-defined phenotypes: clinical failure, radiographic failure, the need for reoperation, and lack of cost-effectiveness. Revision surgery rates remain relatively high, challenging the overall cost-effectiveness of these procedures.

CONCLUSION

By consolidating the key evidence regarding failure, further research and innovation may be stimulated with the goal of significantly improving the safety and cost-effectiveness of ASD surgery.

RCC (reinforced criss-cross construct): an easy and effective multi-rod thoraco-lumbar posterior reconstruction technique

STUDY DESIGN

Surgical technical note and literature review.

OBJECTIVES

To describe a technique that uses 4 rod constructs in cases of complex thoracolumbar spinal deformity correction or revision surgeries based on the hybrid use of two different types of purchase points by a staggered pedicle screw fixation. It utilizes two rods on either side of the spine using a lateral and medial entry point of pedicle screws in the vertebral body.

METHODS

Pedicle screws using extra-pedicular technique are more converging screws and are inserted alternately in the vertebral body and connected by rods. The left-out alternate vertebral bodies are fixed by a relatively straighter pedicle entry screw and connected to each other by a separate rod. So, two trajectories are independently used for a four-rod construct. This reconstruction has been named RCC (reinforced criss-cross construct). The screws in the index case were placed by free hand method, but we have increasingly utilized navigation guidance for placement of screws in recent times.

RESULTS

We present a surgical technical note in a patient with human immunodeficiency virus infection and acquired immune deficiency syndrome (HIV-AIDS). He was diagnosed to have multi-drug-resistant (MDR) tuberculous spondylodiscitis, complicated with Immune reconstitution inflammatory syndrome (IRIS) and implant failure resulting in kyphosis and thoracic myelopathy. RCC with pharmacological management achieved healing and union, which was maintained at 4 years follow-up. Our method of four-rod construct provides a strong and lasting construct in the management of spinal deformities and three-column osteotomies. It provides good structural support to the spine till bony union is achieved.

CONCLUSION

Hybrid multi-rod construct like RCC provides a rigid mechanical support to the instrumentation and reduces the chances of rod failure especially in complex thoraco-lumbar spinal deformity correction surgeries.

Rod Fracture After Pedicle Subtraction Osteotomy Using a Side-Tightening Pedicle Screw System in Consecutive Case Series

OBJECTIVE

The objective of this study was to investigate the incidence and risk factors of rod fractures (RFs) after a single-level lumbar pedicle subtraction osteotomy (PSO) using a side-tightening (ST) pedicle screw system.

METHODS

Fifty-seven consecutive patients who underwent a single-level lumbar PSO for the degenerative sagittal imbalance at a single institution were retrospectively reviewed. All surgeries were performed by a single surgeon using an ST pedicle screw system. Demographic, surgical, and radiographic data were analyzed to investigate the incidence and risk factors for RF.

RESULTS

Seven (12.3%) patients showed RF after PSO. Four patients had bilateral RFs, and 3 patients had unilateral RFs. The location of the RF was at the PSO level in 6 of 7 patients. The ratio of adjacent interbody fusion was significantly different between the group with RF and the group without RF (16.7% vs. 74.0%, P = 0.004). The preoperative segmental angle at the PSO vertebra (-6.1° ± 5.5° vs. -1.7° ± 4.6°, P = 0.049) and postsurgical change in lumbar lordosis (48.4° ± 8.8° vs. 37.8° ± 11.9°, P = 0.033) were significantly different between the 2 groups. Risk factor analysis using stepwise logistic regression analysis revealed that the absence of an adjacent interbody cage (odds ratio = 0.011, 95% confidence interval = 0.000-0.390, P = 0.013) was a significant risk factor.

CONCLUSIONS

The incidence of RF after a single-level lumbar PSO using the ST pedicle screw system was 12.3% in our cohort. The absence of an adjacent interbody cage was a significant risk factor for RF.

Finite element analysis after rod fracture of the spinal hybrid elastic rod system

Background

The spinal hybrid elastic (SHE) rod dynamic stabilization system can provide sufficient spine support and less adjacent segment stress. This study aimed to investigate the biomechanical effects after the internal fracture of SHE rods using finite element analysis.

Methods

A three-dimensional nonlinear finite element model was developed. The SHE rod comprises an inner nitinol stick (NS) and an outer polycarbonate urethane (PCU) shell (PS). The fracture was set at the caudal third portion of the NS, where the maximum stress occurred. The resultant intervertebral range of motion (ROM), intervertebral disc stress, facet joint contact force, screw stress, NS stress, and PCU stress were analyzed.

Results

When compared with the intact spine model, the overall trend was that the ROM, intervertebral disc stress, and facet joint force decreased in the implanted level and increased in the adjacent level. When compared with the Ns-I, the trend in the Ns-F decreased and remained nearly half effect. Except for torsion, the PS stress of the Ns-F increased because of the sharing of NS stress after the NS fracture.

Conclusions

The study concluded the biomechanical effects still afford nearly sufficient spine support and gentle adjacent segment stress after rod fracture in a worst-case scenario of the thinnest PS of the SHE rod system.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-022-05768-x.

Clinical Results of Utilizing the Satellite Rod Technique in Treating Ankylosing Spondylitis Kyphosis

Objective

According to the literature, there are no clinical reports documenting the use of the satellite rod technique in the treatment of ankylosing spondylitis kyphosis. The purpose of this retrospective study was to compare the clinical outcome of patients with ankylosing spondylitis kyphosis who adopted satellite rods versus those who did not.

Methods

Patients with ankylosing spondylitis kyphosis who underwent one or two‐level pedicle subtraction osteotomy (PSO) were reviewed, and total of 119 patients (112 males and seven females, average age 39.89 ± 6.61 years) were eligible and included in this present study. Anterior–posterior and lateral full‐length spine X‐ray films were performed preoperatively and at the two‐year follow‐up visit. Global kyphosis (GK), lumbar lordosis (LL), thoracolumbar kyphosis (TLK), thoracic kyphosis (TK), and osteotomy angle (OA) were measured. The complications of every group of patients were collected. Pre‐ and postoperative health‐related quality of life instruments, including the Bath Ankylosing Spondylitis Functional Index (Basfi) and Scoliosis Research Society outcomes instrument‐22 (SRS‐22), were recorded. The patients were divided into three groups based on features of their osteotomy including PSO levels and whether the satellite rod technique was applied. Patients who underwent one‐level PSO without the satellite rod technique were categorized in the one‐level group. Patients who underwent one‐level PSO with the satellite rod technique were classified in the satellite rod group. Patients who underwent two‐level PSO without the satellite rod technique were included in the two‐level group. The paired sample t test was used to compare pre‐ and postoperative parameters. One‐way ANOVA was performed for multiple group comparisons.

Results

The average follow‐up time is 29.31 ± 3.66 months. The patients' GK were significantly improved from 46.84 ± 20.37 degree to 3.31 ± 15.09 degree. OS achieved through each osteotomy segment of one‐level group (39.78 ± 12.29 degree) and satellite rods group (42.23 ± 9.82 degree), was larger than that of two‐level group (34.73 ± 7.54 and 28.85 ± 7.26 degree). There was no significant difference between the one‐level group and the satellite rod group in achieving the OS. Thirteen patients experienced different complications (10.92%). Three patients experienced rod fracture in the one‐level group. There was no rod fracture or screw failure in the satellite rod group or the two‐level group.

Conclusion

The satellite rod technique is also recommended for patients who undergo PSO osteotomy to correct ankylosing spondylitis kyphosis deformities.

Biomechanical study of rod stress in lumbopelvic fixation with lateral interbody fusion: an in vitro experimental study using synthetic bone models

OBJECTIVE

Despite improvements in surgical techniques and instruments, high rates of rod fracture following a long spinal fusion in the treatment of adult spinal deformity (ASD) remain a concern. Thus, an improved understanding of rod fracture may be valuable for better surgical planning. The authors aimed to investigate mechanical stress on posterior rods in lumbopelvic fixation for the treatment of ASD.

METHODS

Synthetic lumbopelvic bone models were instrumented with intervertebral cages, pedicle screws, S2-alar-iliac screws, and rods. The construct was then placed in a testing device, and compressive loads were applied. Subsequently, the strain on the rods was measured using strain gauges on the dorsal aspect of each rod.

RESULTS

When the models were instrumented using titanium alloy rods at 30° lumbar lordosis and with lateral interbody fusion cages, posterior rod strain was highest at the lowest segment (L5-S1) and significantly higher than that at the upper segment (L2-3) (p = 0.002). Changing the rod contour from 30° to 50° caused a 36% increase in strain at L5-S1 (p = 0.009). Changing the rod material from titanium alloy to cobalt-chromium caused a 140% increase in strain at L2-3 (p = 0.009) and a 28% decrease in strain at L5-S1 (p = 0.016). The rod strain at L5-S1 using a flat bender for contouring was 23% less than that obtained using a French bender (p = 0.016).

CONCLUSIONS

In lumbopelvic fixation in which currently available surgical techniques for ASD are used, the posterior rod strain was highest at the lumbosacral junction, and depended on the contour and material of the rods.

Influence of double rods and interbody cages on range of motion and rod stress after spinopelvic instrumentation: a finite element study

PURPOSE

To compare instrumentation configurations consisting of bilateral single or double rods and additional interbody cages (IBCs) at different levels in terms of Range of Motion (ROM) and distribution of von Mises stress in rods.

METHODS

A previously validated L1-pelvis finite element model was used and instrumented with configurations consisting of single or double bilateral rods and IBCs at multiple levels. Pure moments of 7.5 N.m were applied to L1 in main directions in addition to a follower load of 280 N. Global, segmental ROM and distribution of von Mises stress in rods were studied.

RESULTS

All configurations reduced segmental and global ROM from 50 to 100% compared to the intact spine. Addition of IBCs slightly increased ROM at levels adjacent to the IBC placement. The simple rod configuration presented the highest von Mises stress (457 MPa) in principal rods at L5-S1 in flexion. Doubling rods and IBC placement reduced this value and shifted the location of maximum von Mises stress to other regions. Among studied configurations, double rods with IBCs at all levels (L2-S1) showed the lowest ROM. Maximal von Mises stresses in secondary rods were lower in comparison to main rods.

CONCLUSIONS

Double rods and IBCs reduced global and segmental ROM as well as von Mises stress in rods. The results suggest a possible benefit in using both strategies to minimize pseudarthrosis and instrumentation failure. However, increased ROM in adjacent levels and the shift of maximal von Mises stress to adjacent areas might cause complications elsewhere.

Are the Arbeitsgemeinschaft Für Osteosynthesefragen (AO) Principles for Long Bone Fractures Applicable to 3-Column Osteotomy to Reduce Rod Fracture Rates?

OBJECTIVE

The aim was to determine whether applying Arbeitsgemeinschaft für Osteosynthesefragen (AO) principles for external fixation of long bone fracture to patients with a 3-column osteotomy (3CO) would be associated with reduced rod fracture (RF) rates.

SUMMARY OF BACKGROUND DATA

AO dictate principles to follow when fixating long bone fractures: (1) decrease bone-rod distance; (2) increase the number of connecting rods; (3) increase the diameter of rods; (4) increase the working length of screws; (5) use multiaxial fixation. We hypothesized that applying these principles to patients undergoing a 3CO reduces the rate of RF.

METHODS

Patients were categorized as having RF versus no rod fracture (non-RF). Details on location and type of instrumentation were collected. Dedicated software was used to calculate the distance between osteotomy site and adjacent pedicle screws, angle between screws and the distance between the osteotomy site and rod. Classic sagittal spinopelvic parameters were evaluated.

RESULTS

The study included 170 patients (34=RF, 136=non-RF). There was no difference in age (P=0.224), sagittal vertical axis correction (P=0.287), or lumbar lordosis correction (P=0.36). There was no difference in number of screws cephalad (P=0.62) or caudal (P=0.31) to 3CO site. There was a lower rate of RF for patients with >2 rods versus 2 rods (P<0.001). Patients with multiplanar rod fixation had a lower rod fracture rate (P=0.01). For patients with only 2 rods (N=68), the non-RF cohort had adjacent screws that trended to have less angulation to each other (P=0.06) and adjacent screws that had a larger working length (P=0.03).

CONCLUSIONS

A portion of AO principles can be applied to 3CO to reduce RF rates. Placing more rods around a 3CO site, placing rods in multiple planes, and placing adjacent screws with a larger working length around the 3CO site is associated with lower RF rates.

Combined anterior-posterior versus all-posterior approaches for adult spinal deformity correction: a matched control study

PURPOSE

Anterior approaches are gaining popularity for adult spinal deformity (ASD) surgeries especially with the introduction of hyperlordotic cages and improvement in MIS techniques. Combined Approaches provide powerful segmental sagittal correction potential and increase the surface area available for fusion in ASD surgery, both of which would improve overall. This is the first study directly comparing surgical outcomes between combined anterior-posterior approaches and all-posterior approach in a matched ASD population.

METHODS

This is a retrospective matched control cohort analysis with substitution using a multicenter prospectively collected ASD data of patients with > 2 year FU. Matching criteria include: age, American Society of Anesthesiologists Score, Lumbar Cobb angle, sagittal deformity (Global tilt) and ODI.

RESULTS

In total, 1024 ASD patients were available for analysis. 29 Combined Approaches patients met inclusion criteria, and only 22 could be matched (1:2 ratio). Preoperative non-matched demographical, clinical, surgical and radiological parameters were comparable between both groups. Combined approaches had longer surgeries (548 mns vs 283) with more blood loss (2850 ml vs 1471) and needed longer ICU stays (74 h vs 27). Despite added morbidity, they had comparable complication rates but with significantly less readmissions (9.1% vs 38.1%) and reoperations (18.2% vs 43.2%) at 2 years. Combined Approaches achieved more individualised and harmonious deformity correction initially. At the 2 years control, Combined Approaches patients reported better outcomes as measured by COMI and SRS scores. This trend was maintained at 3 years.

CONCLUSION

Despite an increased initial surgical invasiveness, combined approaches seem to achieve more harmonious correction with superior sagittal deformity control; they need fewer revisions and have improved long-term functional outcomes when compared to all-posterior approaches for ASD deformity correction.

Metallic Implants Used in Lumbar Interbody Fusion

Over the last decade, pedicle fixation systems have evolved and modifications in spinal fusion techniques have been developed to increase fusion rates and improve clinical outcomes after lumbar interbody fusion (LIF). Regarding materials used for screw and rod manufacturing, metals, especially titanium alloys, are the most popular resources. In the case of pedicle screws, that biomaterial can be also doped with hydroxyapatite, CaP, ECM, or tantalum. Other materials used for rod fabrication include cobalt-chromium alloys and nitinol (nickel-titanium alloy). In terms of mechanical properties, the ideal implant used in LIF should have high tensile and fatigue strength, Young's modulus similar to that of the bone, and should be 100% resistant to corrosion to avoid mechanical failures. On the other hand, a comprehensive understanding of cellular and molecular pathways is essential to identify preferable characteristics of implanted biomaterial to obtain fusion and avoid implant loosening. Implanted material elicits a biological response driven by immune cells at the site of insertion. These reactions are subdivided into innate (primary cellular response with no previous exposure) and adaptive (a specific type of reaction induced after earlier exposure to the antigen) and are responsible for wound healing, fusion, and also adverse reactions, i.e., hypersensitivity. The main purposes of this literature review are to summarize the physical and mechanical properties of metal alloys used for spinal instrumentation in LIF which include fatigue strength, Young's modulus, and corrosion resistance. Moreover, we also focused on describing biological response after their implantation into the human body. Our review paper is mainly focused on titanium, cobalt-chromium, nickel-titanium (nitinol), and stainless steel alloys.

Improvement and International Validation of the Predictive Probability of the Patient Demographics, Radiographic Index, and Surgical Invasiveness for Mechanical Failure (PRISM) Model for Preventive Procedures in Adult Spinal Deformity Surgery

STUDY DESIGN

This is an international multicenter retrospective review of 219 surgically treated consecutive adult spinal deformity (ASD) patients who had a minimum of five fused segments, completed a 2-year follow-up.

OBJECTIVE

The purpose of this study was to add the indices of preventive procedures to improve and to validate the predictive probability of the PRISM (patient demographics, radiographic index, and surgical invasiveness for mechanical failure) for mechanical failure (MF) following ASD surgery.

SUMMARY OF BACKGROUND DATA

The PRISM was developed from the data of 321 ASD patients, which stratified the risk of MF from six types of risk.

METHODS

Data from 136 Japanese ASD patients (age 49 ± 21 yr, 88% female) were used to develop PRISM2, and data from 83 US ASD patients (age 58 ± 12 yr, 86% female) were used for the external validation. We analyzed the associations between three preventive procedures (UIV+1 tethering [TH], teriparatide [TP], and multirod [MR]) and MF by multivariate logistic regression analysis (MRA). The values for the nearest integer of the β of the procedures were added to the six indices of the original PRISM to establish the PRISM2. The discriminative ability of the PRISM/ PRISM2 for MF was evaluated using the area under the receiver operating characteristic curve (AUC) and the precision-recall (PR) curve. The Cochran-Armitage test was used to analyze the trend between PRISM/PRISM2 scores and MF.

RESULTS

MF developed in 25% (34 cases). The β values for the preventive procedures calculated by MRA were TH: -2.5, TP: -3.0, and MR: -2.1. The Cochran-Armitage test showed an excellent trend between MF and PRISM/2. The diagnostic ability was superior for the PRISM2 compared with the PRISM (PRISM2; AUC = 0.94 [0.90-0.98], PRISM; AUC = 0.87 [0.81-0.93], difference = -0.07 [-0.11 to -0.03], P  < 0.01). The AUC of the PRISM2 was 0.70 [0.59-0.81, P < 0.01] in the US patient cohort.

CONCLUSION

We refined the PRISM by adding preventive procedures to the risk indices. Further validation and adjustment in a large different patient cohorts may improve the predictive probability of PRISM2.Level of Evidence: 3.

Pedicle Subtraction Osteotomy Construct Optimization: A Cadaveric Study of Various Multirod and Interbody Configurations

STUDY DESIGN

Fourteen cadaveric specimens were separated into two groups: (1) L3 pedicle subtraction osteotomy (PSO) with transforaminal lumbar interbody fusion (TLIF) or (2) lateral lumbar interbody fusion (LLIF). A 2-rod configuration (2R) was compared with two supplemental rod configurations: 4-rod (4R) with accessory rods (ARs) using connectors or 4R with satellite rods (SRs) without connectors.

OBJECTIVE

Compare PSO constructs with different rod configurations and adjacent-level interbody support.

SUMMARY OF BACKGROUND DATA

Supplemental rods and anterior column support enhance biomechanical performance.

METHODS

Pure moments were applied in (1) intact, (2) pedicle screws and rods, (3) PSO + 2R, (4) 4R AR, and (5) 4R SR conditions. Primary and supplemental rods had strain gauges across the index level. Sacral screw bending moments and range of motion (ROM) were recorded.

RESULTS

For TLIF, AR decreased ROM during flexion (P = 0.02) and extension (P < 0.001) versus 2R. For LLIF, AR and SR decreased motion versus 2R during left (AR: P  = 0.03; SR: P  = 0.04) and right (AR: P  = 0.002; SR: P  = 0.01) axial rotation. For LLIF, sacral screw strain increased with SR compared with AR in compression and right lateral bending (P ≤ 0.03). During lateral bending, rod strain increased with PSO+TLIF+SR versus PSO+LLIF+2R and PSO+LLIF+AR (P ≤ 0.02). For LLIF, SR configuration increased rod strain versus AR during flexion, extension, and lateral bending (P≤ 0.01); for TLIF, rod strain increased with SR versus AR during extension (P = 0.03). For LLIF, AR configuration increased posterior supplemental rod strain versus SR during flexion (P = 0.02) and lateral bending (P < 0.001).

CONCLUSION

Both supplemental rod configurations reduced motion in both groups. Constructs with the SR configuration increased the primary rod strain and the sacral screw bending moment compared with AR constructs, which can share strain. Deep-seated SRs, which have become increasingly popular, may be more vulnerable to failure than ARs. LLIF provided more stability in sagittal plane. Protective effect of supplemental rods on rod strain was more effective with TLIF.Level of Evidence: NA.

The Incidence of Iliac Screw-Related Complications After Long Fusion Surgery in Patients with Adult Spinal Deformity

STUDY DESIGN

Retrospective study.

OBJECTIVE

To investigate the long-term clinical outcome and incidence of iliac screw-related complications in patients with adult spinal deformity (ASD).

SUMMARY OF BACKGROUND DATA

Rigid lumbosacral fixation is crucial to achieve optimal global alignment and successful long-term clinical outcomes.

METHODS

The data of eligible patients with ASD who underwent spinopelvic fixation using bilateral iliac screws with at least 5-year follow-up periods were retrospectively analyzed. Iliac screw loosening and rod breakage between the S1 and iliac (S1/IL) screws were defined as distal instability (DI). Demographic data, health-related quality of life scores, and spinopelvic parameters in the DI group were compared with those in the non-DI group. Sub-group analyses were performed between the cases with and without alignment change after rod fracture at S1/IL.

RESULTS

Of the 159 patients, the data of 110 patients (15 men, 95 women; mean age, 67.8 yr) were analyzed. The follow-up rate was 69%. Forty-five (41%) patients showed DI (29 cases [26%] in screw loosening, 16 cases [15%] in rod breakage). Eight patients (7.3%) required revision surgery because of iliac screw-related complications. No significant differences were observed in the Oswestry Disability Index and Scoliosis Research Society questionnaire (revised) scores between the DI and non-DI groups. The patients with iliac screw loosening showed significantly greater values of preoperative pelvic incidence, pelvic tilt (PT), and postoperative PT, and T1-pelvic angle. In patients with rod breakage at S1/IL, five patients (31%) who had associated mechanical complications showed an alignment change between pre and post rod breakage. They showed significantly higher and lower rates of high-grade osteotomies and L5/S interbody fusion, respectively.

CONCLUSION

The incidence rate of iliac screw-related complications was relatively high. However, they had a little effect on sagittal alignment deterioration and there were few cases that required revision surgery.Level of Evidence: 4.