Evaluation and Suppression of Retrogradation of Gelatinized Rice Starch

Insight to starch retrogradation through fine structure models: A review

The retrogradation of starch is crucial for the texture and nutritional value of starchy foods products. There is mounting evidence highlighting the significant impact of starch's fine structures on starch retrogradation. Because of the complexity of starch fine structure, it is a formidable challenge to study the structure-property relationship of starch retrogradation. Several models have been proposed over the years to facilitate understanding of starch structure. In this review, from the perspective of starch models, the intricate structure-property relationship is sorted into the correlation between different types of structural parameters and starch retrogradation performance. Amylopectin B chains with DP 24-36 and DP ≥36 exhibit a higher tendency to form ordered crystalline structures, which promotes starch retrogradation. The chains with DP 6-12 mainly inhibit starch retrogradation. Based on the building block backbone model, a longer inter-block chain length (IB-CL) enhances the realignment and reordering of starch. The mathematical parameterization model reveals a positive correlation between amylopectin medium chains, amylose short chains, and amylose long chains with starch retrogradation. The review is structured according to starch models; this contributes to a clear and comprehensive elucidation of the structure-property relationship, thereby providing valuable references for the selection and utilization of starch.

From micro to macro: Physical-chemical characterization of wheat starch-based films modified with PEG200, sodium citrate, or citric acid

Needing to extend the shelf-life of packaged food and the evolving consumer demands led researchers to seek innovative, eco-friendly, and biocompatible packaging solutions. Starch is among the most promising natural and renewable alternatives to non-degradable plastics. Here, we deeply study the structural features of starch films modified by adding citric acid (CA) or sodium citrate (SC) as a cross-linker and polyethylene glycol 200 (PEG200) as a plasticizer and obtained through solvent casting. The substances' influence on starch films was evaluated through Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) and Solid-state Nuclear Magnetic Resonance (ss-NMR) spectroscopies. Films' macroscopic properties, such as swelling index, solubility, thermo-mechanical features, and moisture absorption, were also assessed to foresee potential applications. Proper amounts of CA, CS, and PEG200 improve film properties and inhibit starch chains' retrogradation and recrystallization. Besides, the chemical neighbourhood of nuclei observed through ss-NMR significantly changed alongside the polymer chains' mobility. The latter result indicates a different polymer chain structural organization that could justify the film's higher resistance to thermal degradation and elongation at the break. This methodological approach is effective in predicting the macroscopic behaviour of a polymeric material and could be helpful for the application of such products in food preservation.

Extraction, physicochemical characterization, functionality, and excipient ability of corn fiber gum-starch isolate from corn milling industry waste

Corn processing industries generate an extensive fibrous byproduct consisting of corn fiber gum (CFG) and residual starch (S). The present study hypothesized that CFG and S could be isolated as a single crosslinked conjugate. The isolated CFG-S conjugate was acidic, with a pKa value of 11.49, and a swelling index of 99.60%. Henderson-Hasselbalch equation predicted negligible ionization throughout the gastrointestinal pH range. The DSC thermogram highlights glass transition and temperature-specific structure stabilization through the exothermic crystallization domain. FTIR, SEM & XRD confirmed the structural conjugation and integrity of the conjugate. Tablets containing Venlafaxine hydrochloride as a model drug were prepared using CFG-S (14 and 57%) as excipient by wet granulation method. Percentage cumulative drug release with low concentration was up to 99.67175 ± 0.09 % in 5 h whereas with high concentration, it was extended to 12 h (P < 0.05). Korsemayer-Peppas release exponent indicates zero order (R2 = 0.9935) kinetics with super case-II anomalous transport showing diffusion and erosion as drug release mechanisms. The results confirmed that CFG-S isolate could act as a good binding agent at low concentrations and release extending cross-linked matrix former at a higher concentration for release retardant excipient.

Development of Biodegradable Rigid Foams from Pineapple Field Waste

Pineapple materials sourced from agricultural waste have been employed to process novel bio-degradable rigid composite foams. The matrix for the foam consisted of starch extracted from pineapple stem, known for its high amylose content, while the filler comprised non-fibrous cellulosic materials sourced from pineapple leaf. In contrast to traditional methods that involve preparing a batter, this study adopted a unique approach where the starch gel containing glycerol were first formed using a household microwave oven, followed by blending the filler into the gel using a two-roll mill. The resulting mixture was then foamed at 160 °C using a compression molding machine. The foams displayed densities ranging from 0.43-0.51 g/cm³ and exhibited a highly amorphous structure. Notably, the foams demonstrated an equilibrium moisture content of approximately 8-10% and the ability to absorb 150-200% of their own weight without disintegration. Flexural strengths ranged from 1.5-4.5 MPa, varying with the filler and glycerol contents. Biodegradability tests using a soil burial method revealed complete disintegration of the foam into particles measuring 1 mm or smaller within 15 days. Moreover, to showcase practical applications, an environmentally friendly single-use foam tray was fabricated. This novel method, involving gel formation followed by filler blending, sets it apart from previous works. The findings highlight the potential of pineapple waste materials for producing sustainable bio-degradable foams with desirable properties and contribute to the field of sustainable materials.

Thermogravimetric, Morphological and Infrared Analysis of Blends Involving Thermoplastic Starch and Poly(ethylene-co-methacrylic acid) and Its Ionomer Form

This study focuses on the thermal properties and structural features of blends consisting of thermoplastic starch (TPS) and poly(ethylene-co-methacrylic acid) copolymer (EMAA) or its ionomer form (EMAA-54Na). The aim is to investigate how carboxylate functional groups of the ionomer form intervene in blends compatibility at the interface of the two materials and how this impacts their properties. Two series of blends (TPS/EMAA and TPS/EMAA-54Na) were produced with an internal mixer, with TPS compositions between 5 and 90 wt%. Thermogravimetry shows two main weight losses, indicating that TPS and the two copolymers are primarily immiscible. However, a small weight loss existing at intermediate degradation temperature between those of the two pristine components reveals specific interactions at the interface. At a mesoscale level, scanning electron microscopy confirmed thermogravimetry results and showed a two-phase domain morphology, with a phase inversion at around 80 wt% TPS, but also revealed a different surface appearance evolution between the two series. Fourier-transformed infrared spectroscopy analysis also revealed discrepancies in fingerprint between the two series of blends, analysed in terms of additional interactions in TPS/EMAA-54Na coming from the supplementary sodium neutralized carboxylate functions of the ionomer.

Toward a Circular Bioeconomy: Development of Pineapple Stem Starch Composite as a Plastic-Sheet Substitute for Single-Use Applications

Plastic waste poses a significant challenge for the environment, particularly smaller plastic products that are often difficult to recycle or collect. In this study, we developed a fully biodegradable composite material from pineapple field waste that is suitable for small-sized plastic products that are difficult to recycle, such as bread clips. We utilized starch from waste pineapple stems, which is high in amylose content, as the matrix, and added glycerol and calcium carbonate as the plasticizer and filler, respectively, to improve the material's moldability and hardness. We varied the amounts of glycerol (20-50% by weight) and calcium carbonate (0-30 wt.%) to produce composite samples with a wide range of mechanical properties. The tensile moduli were in the range of 45-1100 MPa, with tensile strengths of 2-17 MPa and an elongation at break of 10-50%. The resulting materials exhibited good water resistance and had lower water absorption (~30-60%) than other types of starch-based materials. Soil burial tests showed that the material completely disintegrated into particles smaller than 1 mm within 14 days. We also created a bread clip prototype to test the material's ability to hold a filled bag tightly. The obtained results demonstrate the potential of using pineapple stem starch as a sustainable alternative to petroleum-based and biobased synthetic materials in small-sized plastic products while promoting a circular bioeconomy.

Effect of high-pressure homogenisation-modified bacterial cellulose on rice starch retrogradation

Delaying rice starch (RS) retrogradation can improve the quality parameters of rice-based starchy foods during storage. Modification of insoluble dietary fibre has always been used in the starchy food industry. Compared with vegetal insoluble dietary fibre, bacterial cellulose (BC) has many advantages such as high purity, smaller particle size, and elevated water absorption capacity. In the present work, BC was modified by high-pressure homogenisation (MBC) with different pressure levels (0, 50, 80, 120, and 160 MPa) to investigate the effect of MBC on RS retrogradation. Results showed that high-pressure homogenisation could decrease the particle size of BC. MBC addition to RS decreased paste breakdown and setback, thus suggesting that MBC might be a good candidate for increasing the stability of RS paste, and inhibiting its short-term retrogradation. The thermal properties and X-ray diffraction patterns of RS indicated that supplementing MBC could decrease the gelatinised enthalpy and relative crystallinity of RS paste during storage. Results also indicated that MBC could provide an opportunity to restrain RS retrogradation, and might be suitable for designing fibre-enriched products.

How to synchronously slow down starch digestion and retrogradation: A structural analysis study

Digestibility and retrogradation properties of starch are important for the nutrition and quality of starch-based foods. In this study, a new idea on the synchronous delay the starch digestion and retrogradation was proposed, and the regulation mechanism was explored from perspectives of structural evolution using ¹³C NMR, XRD and SAXS techniques as well as the molecular dynamics simulations. Results showed that the chestnut starch treated with hot extrusion and 8% catechins (HE-8% CA)## could reach highest anti-retrogradation rate (AR 76.63%) and lowest rapidly digestible starch content (RDS 64.55%) at day 24. The starch digestion was slowed down by increasing single/double helix, V-type crystallinity and compactness of aggregates, while retrogradation process was suppressed by inhibiting the packing of short-range ordered structure into long-range ordered structure. The hydrogen bonding and van der Waals forces were the main driving force for the interactions between flavonoid polyphenols and starch molecules. Overall, this study is instructive for further investigations on the synchronous modulation of functional properties of starch.

Extraction, purification and characterisation of exopolysaccharides produced by newly isolated lactic acid bacteria strains and the examination of their influence on resistant starch formation

Exopolysaccharides (EPS) were produced by four newly isolated lactic acid bacteria strains, then further extracted, separated and characterised under standardised conditions. Using a sucrose carbon source, these LAB strains belonging to Weissella confusa/cibaria produced EPS with a dextran high molecular weight fraction. The obtained yields of EPS ranged from 3.2 g/L to 47.1 g/L and outstandingly high yields were obtained using Weissella confusa/cibaria 3MI3 isolated from spontaneous spelt sourdough. After purification the influence of EPS-dextran of molar mass 3,244,000 g/mol on resistant starch formation in wheat starch pastes and pasted samples after temperature-cycled storage was examined. Size exclusion chromatography with post-column derivatisation revealed that a 1.5% share of EPS dextran limited formation of high molar mass resistant starch in starch pastes during storage. This work provides new insight on hindering resistant starch formation by using EPS, which could be efficiently produced in sourdough, thus improving the properties of sourdough bread.

Effect of cooling rate on long-term recrystallized crystal of rice starch in the presence of flavor compounds

This study evaluated the effect of cooling rate on starch recrystallization in the presence of 2,3-butanedione and 2-acetyl-1-pyrroline, which could form B-type and V-type complexes with starch, respectively. Rapid cooling resulted in poor perfection and high heterogeneity of both B-type and V-type recrystallized crystal. For B-type crystal, rapid cooling changed nucleation mode from instantaneous (Avrami index n < 1) to continuous mechanism (1 ≤ n ≤ 2), and decreased recrystallization rate from 0.0502 to 0.0160 d^-n, indicating the increased retention of starch on 2,3-butanedione. V-type crystal was formed at initial stages of recrystallization, and inhibited the growth of B-type crystal. The loose crystalline obtained by rapid cooling is conducive to the retention of flavor compounds for B-type complexes (especially ≤14 days) and V-type complexes (especially ≤1 day). These results could provide guidance for maintaining fragrance of instant rice during long-term storage.