Tumor cell pH detection based on CdSe quantum dots' fluorescence charateristics

Quantum Dot-based Bio-conjugates as an Emerging Bioimaging Tool for Cancer Theranostic- A Review

Cancer is the most widely studied disorder in humans, but proper treatment has not yet been developed for it. Conventional therapies, like chemotherapy, radiation therapy, and surgery, have been employed. Such therapies target not only cancerous cells but also harm normal cells. Conventional therapy does not result in specific targeting and hence leads to severe side effects. The main objective of this study is to explore the QDs. QDs are used as nanocarriers for diagnosis and treatment at the same time. They are based on the principle of theranostic approach. QDs can be conjugated with antibodies via various methods that result in targeted therapy. This results in their dual function as a diagnostic and therapeutic tool. Nanotechnology involving such nanocarriers can increase the specificity and reduce the side effects, leaving the normal cells unaffected. This review pays attention to different methods for synthesising QDs. QDs can be obtained using either organic method and synthetic methods. It was found that QDs synthesised naturally are more feasible than the synthetic process. Top or bottom-up approaches have also emerged for the synthesis of QDs. QDs can be conjugated with an antibody via non-covalent and covalent binding. Covalent binding is much more feasible than any other method. Zero-length coupling plays an important role as EDC (1-Ethyl-3-Ethyl dimethylaminopropyl)carbodiimide is a strong crosslinker and is widely used for conjugating molecules. Antibodies work as surface ligands that lead to antigen- antibody interaction, resulting in site-specific targeting and leaving behind the normal cells unaffected. Cellular uptake of the molecule is done by either passive targeting or active targeting. QDs are tiny nanocrystals that are inorganic in nature and vary in size and range. Based on different sizes, they emit light of specific wavelengths. They have their own luminescent and optical properties that lead to the monitoring, imaging, and transport of the therapeutic moiety to a variety of targets in the body. The surface of the QDs is modified to boost their functioning. They act as a tool for diagnosis, imaging, and delivery of therapeutic moieties. For improved therapeutic effects, nanotechnology leads the cellular uptake of nanoparticles via passive targeting or active targeting. It is a crucial platform that not only leads to imaging and diagnosis but also helps to deliver therapeutic moieties to specific sites. Therefore, this review concludes that there are numerous drawbacks to the current cancer treatment options, which ultimately result in treatment failure. Therefore, nanotechnology that involves such a nanocarrier will serve as a tool for overcoming all limitations of the traditional therapeutic approach. This approach helps in reducing the dose of anticancer agents for effective treatment and hence improving the therapeutic index. QDs can not only diagnose a disease but also deliver drugs to the cancerous site.

pH biosensors based on hydrogel optical fiber

This paper presents a hydrogel optical fiber fluorescence pH sensor doped with 5(6)-carboxyfluorescein (5(6)-FAM). The hydrogel optical fiber was fabricated with 2-hydroxy-2-methylpropiophenone as a photoinitiator, with different concentrations of polyethylene glycol diacrylate (PEGDA) for the core and cladding. A pH-sensitive fluorescence indicator 5(6)-FAM was doped into the core of the fiber. The prepared hydrogel optical fiber pH sensor showed good response within the pH range of 5.0-9.0. The linear range of the pH sensor is 6.0 to 8.0, with R 2=0.9904; within this range, the sensor shows good repeatability and reversibility, and the resolution is 0.07 pH units. The pHs of pork tissues soaked in different pH buffers were detected by the hydrogel optical fiber pH sensor; the linearity is 0.9828 when the pork tissue pH is in the range of 6.0-7.5. Due to the good ion permeability and biocompatibility of the hydrogel, this hydrogel optical fiber pH sensor is expected to be used in biomedical applications.

Ratiometric fluorescent probe based on non-conjugated polymer dots for pH measurements in ordinary Portland cement-based materials

An organic fluorescent probe, citric acid-1,3-Propanediamine-Rhodamine B (CPR) was synthesized to determine pH of ordinary Portland cement requiring only a small sample size (less than 500 μL cement leachate). The SEM, XRD, and FTIR investigations demonstrate that citric acid-1,3-Propanediamine are polymer dots with a fusiform structure. Ratio pH probe is constructed by rhodamine B with polymer dots, which exhibits a linear response in high alkaline range. A 6-fold increase in fluorescence intensity (455 nm) is achieved at pH from 12.00 to 13.25. Combined with measurements of the isothermal calorimeter, mineral composition, and microscopic morphology, variation of pH is used to evaluate the changes of components during hydration. Furthermore, CPR can be applied to measure pH of high-dose pulverized fuel ash blending systems, the non-pure cement with slightly lower alkalinity.

Size- and surface functionalization-driven molecular interaction of CdSe quantum dots with jack bean urease: multispectroscopic, thermodynamic, and AFM approach

Quantum dots (QDs) with distinctive optical properties have been extensively researched and developed for usage in solar cells, imaging, drug delivery, cellular targeting, etc. But the inevitable production of QDs can lead to their unavoidable release and increased environmental concentration. Depending on morphological and surface properties, QDs at the nano-bio interface considerably impact the activity and structure of bio-molecules. The present study investigates the interaction of metalloenzyme jack bean urease (JBU) and bi-sized CdSe QDs (2.43 nm and 3.63 nm), surface-functionalized to mercaptopropionic acid (MPA) (-COOH), L-cysteine (CYS), L-glutathione (GSH), N-acetyl L-cysteine (NAC) (-COOH, -NH₂), and cysteamine hydrochloride (CYST) (-NH₂) to assess any alterations in JBU's binding, microenvironment, structure, exciton lifetime, and activity. JBU catalyzes the hydrolysis of urea to produce ammonia and carbon dioxide; any changes in its properties could threaten the survival of several microbes and plants. Spectroscopy techniques such as UV-Vis, fluorescence, circular dichroism, synchronous, time-resolved fluorescence, atomic force microscopy, and JBU activity assay were studied. Results suggested highly spontaneous and energy-favored interactions, which involved static quenching and hydrophobic forces of varied magnitude, dependent on QDs properties. The size, surface modifications, and dosage of QDs significantly impacted the secondary structure and activity of JBUs. Even though the larger sizes of the relevant modifications demonstrated stronger binding, the smaller sizes had the greatest impact on α-helicity and activity. CYST-capped QDs with an average number of the binding site (n) = 1, reduced α-helicity by 16% and activity by 22-30% at 7 nM concentration. In contrast, MPA-capped QDs with n < 1 had the least effect on α-helical structure and activity. The smaller GSH-capped QDs increased the activity by 9%, via partially restoring JBU's α-helical content. The study thus thoroughly analyzed the impact of varied-size and surface-functionalized QDs on the structure and function of JBU, which can be exploited further for several biomedical applications.

Glycopolymer Decorated pH-Dependent Ratiometric Fluorescent Probe Based on Förster Resonance Energy Transfer for the Detection of Cancer Cells

Development of fluorescent imaging probes is an important topic of research for the early diagnosis of cancer. Based on the difference between the cellular environment of tumor cells and normal cells, several "smart" fluorescent probes have been developed. In this work, a glycopolymer functionalized Förster resonance energy transfer (FRET) based fluorescent sensor is developed, which can monitor the pH change in cellular system. One-pot sequential reversible addition-fragmentation chain transfer (RAFT)polymerization technique is employed to synthesize fluorescent active triblock glycopolymer that can undergo FRET change on the variation of pH. A FRET pair, fluorescein o-acrylate (FA) and 7-amino-4-methylcoumarin (AMC) is linked via a pH-responsive polymer poly [2-(diisopropylamino)ethyl methacrylate] (PDPAEMA), which can undergo reversible swelling/deswelling under acidic/neutral condition. The presence of glycopolymer segment provides stability, water solubility, and specificity toward cancer cells. The cellular FRET experiments on cancer cells (MDA MB 231) and normal cells (3T3 fibroblast cells) demonstrate that the material is capable of distinguishing cells as a function of pH change.

Imaging methods to evaluate tumor microenvironment factors affecting nanoparticle drug delivery and antitumor response

Standard small molecule and nanoparticulate chemotherapies are used for cancer treatment; however, their effectiveness remains highly variable. One reason for this variable response is hypothesized to be due to nonspecific drug distribution and heterogeneity of the tumor microenvironment, which affect tumor delivery of the agents. Nanoparticle drugs have many theoretical advantages, but due to variability in tumor microenvironment (TME) factors, the overall drug delivery to tumors and associated antitumor response are low. The nanotechnology field would greatly benefit from a thorough analysis of the TME factors that create these physiological barriers to tumor delivery and treatment in preclinical models and in patients. Thus, there is a need to develop methods that can be used to reveal the content of the TME, determine how these TME factors affect drug delivery, and modulate TME factors to increase the tumor delivery and efficacy of nanoparticles. In this review, we will discuss TME factors involved in drug delivery, and how biomedical imaging tools can be used to evaluate tumor barriers and predict drug delivery to tumors and antitumor response.

An Assessment of InP/ZnS as Potential Anti-Cancer Therapy: Quantum Dot Treatment Increases Apoptosis in HeLa Cells

InP/ZnS quantum dots (QDs) are an emerging option in QD technologies for uses of fluorescent imaging as well as targeted drug and anticancer therapies based on their customizable properties. In this study we explored effects of InP/ZnS when treated with HeLa cervical cancer cells. We employed XTT viability assays, reactive oxygen species (ROS) analysis, and apoptosis analysis to better understand cytotoxicity extents at different concentrations of InP/ZnS. In addition, we compared the transcriptome profile from the QD-treated HeLa cells with that of untreated HeLa cells to identify changes to the transcriptome in response to the QD. RT-qPCR assay was performed to confirm the findings of transcriptome analysis, and the QD mode of action was illustrated. Our study determined both IC50 concentration of 69 µg/mL and MIC concentration of 167 µg/mL of InP/ZnS. It was observed via XTT assay that cell viability was decreased significantly at the MIC. Production of superoxide, measured by ROS assay with flow cytometry, was decreased, whereas levels of nitrogen radicals increased. Using analysis of apoptosis, we found that induced cell death in the QD-treated samples was shown to be significantly increased when compared to untreated cells. We conclude InP/ZnS QD to decrease cell viability by inducing stress via ROS levels, apoptosis induction, and alteration of transcriptome.

High Sensitivity Detection of Copper Ions in Oysters Based on the Fluorescence Property of Cadmium Selenide Quantum Dots

Cadmium selenide (CdSe) quantum dots (QDs) were synthesized by water phase synthesis method using 3-mercaptopropionic acid (3-MPA) as a stabilizer, and they were applied to the detection of copper ions (Cu2+). The results showed that CdSe QDs have excellent selectivity and sensitivity toward Cu2+. The fluorescence intensity of CdSe QDs decreased with the increase of Cu2+ concentration. The linear range was from 30 nM to 3 μM, and the detection limit was 30 nM. Furthermore, CdSe QDs were used for detecting the concentration of Cu2+ in oysters. The content of Cu2+ was 40.91 mg/kg, which was close to the one measured via flame atomic absorption spectrometry (FAAS), and the relative error was 1.81%. Therefore, CdSe QDs have a wide application prospect in the rapid detection of copper ions in food.