Comparison of red blood cell hemolysis using plasma and serum separation tubes for outpatient specimens

Comparative and stability study of glucose concentrations measured in both sodium fluoride and serum separator tubes

Introduction

Sodium fluoride/potassium oxalate (NaF/KOx) tubes has been regarded as the gold-standard tubes for glucose analysis. Even though their ineffectiveness in immediately inhibiting glycolysis has been reported in several studies especially in the first 1-4h, they are still used in our clinical biochemistry laboratory for glucose measurement. However, in its absence, only serum separator tubes are employed for glucose measurement. We aim to determine whether serum separator tubes (SSTs) can replace NaF/KOx tubes for laboratory measurement of blood glucose and to assess the stability of glucose concentrations for 3 days period.

Methods and findings

NaF/KOx tube type was the reference method while SSTs type was the candidate method for glucose measurement. A total of 50 paired samples collected separately in NaF/KOx tubes and SSTs from healthy adult participants in the Gambia Adults Reference Intervals Study (GARIS) project were used as the project sample size. Following blood collection and separation, the glucose concentration was measured within 2 h, and at 24h, 42h and 72h time-points. Our data analysis showed no significant difference in the mean glucose concentrations between the reference tube and candidate tube types (Mean difference = 0.06 mmol/L; P = 0.38) recorded in the different timepoints. Using growth trajectory and mixed effects model, the study data further showed no significant change in the glucose concentrations (p = 0.25) for three days period.

Conclusions

The study confirms that SSTs can produce similar glucose results when employed in the absence of NaF/KOx tubes. Besides, the glucose concentrations were stable in both tubes for three days when the samples were separated within 2 h and refrigerated in 2-8°C.

Identification of starvation-mimetic bioactive phytocomponent from Withania somnifera using in-silico molecular modelling and flow cytometry-based analysis for the management of malaria

Multidrug resistance episodes in malaria increased from 3.9% to 20% from 2015 to 2019. Synchronizing the clinical manifestation in chronological sequence led to a unique impression on glucose demand (increased up to 100-fold) by the parasite-infected RBCs. Hence, restriction in the glucose uptake to parasite-infected RBCs could be an alternative approach to conquer the global burden of malaria to a greater extent. A C28 steroidal lactone Withaferin A (WS-3) isolated from Withania somnifera leave extract shows better thermodynamically stable interactions with the glucose transporters (GLUT-1 and PfHT) to standard drugs metformin and lopinavir. MD simulations for a trajectory period of 100 ns reflect stable interactions with the interactive amino acid residues such as Pro141, Gln161, Gln282, Gln283, Trp388, Phe389, and Phe40, Asn48, Phe85, His168, Gln169, Asn311 which potentiating inhibitory activity of WS-3 against GLUT-1 and PfHT respectively. WS-3 was non-hemotoxic (%hemolysis <5%) for a high concentration of up to 1 mg/ml in the physiological milieu. However, the %hemolysis significantly increased up to 30.55 ± 0.929% in a parasitophorous simulated environment (pH 5.0). Increased hemolysis of WS-3 could be due to the production of ROS in an acidic environment. Further, the inhibitory activity of WS-3 against both glucose transporters was supported with flow cytometry-based analysis of parasite-infected RBCs. Results show that WS-3 has low mean fluorescence intensities for both target proteins compared to conventional drugs, suggesting a potential sugar transporter inhibitor against GLUT-1 and PfHT for managing malaria. Communicated by Ramaswamy H. Sarma.

Evaluation of the Barricor Tube in 28 Routine Chemical Tests and Its Impact on Turnaround Time in an Outpatient Clinic

Background

We recently introduced the Barricor (BD, Franklin Lakes, NJ, USA) plasma separation tube, which uses a mechanical separator instead of a gel. We evaluated the effects of using the Barricor tube in a stat (statin) laboratory on the results and turnaround time (TAT) of routine chemical tests. We verified the impact of Barricor tube on reducing TAT and providing results similar to those obtained using serum separator tubes (SSTs).

Methods

We collected venous blood samples from 166 outpatients in Barricor tubes and SSTs and measured 28 routine analytes using an AU5800 instrument (Beckman Coulter, Brea, CA, USA). TAT indexes were compared before and after using Barricor tube.

Results

Mean percent differences were <5%, except for alanine aminotransferase , total CO₂, high-density lipoprotein, phosphate, total protein, and direct bilirubin. The median TAT decreased from 45 to 38 minutes, and the rate of a TAT >60 minutes decreased from 7.84% to 2.66%, which was approximately one-third of that for SST. The reduction in TAT was attributable to a decrease in centrifugation time. Incomplete clotting and repeated centrifugation, which occurred frequently when using SST, also decreased after using the Barricor tubes.

Conclusions

The Barricor tube is an alternative to SST for routine chemical tests in institutions aiming to reduce TAT, with clinically allowable differences in test results.

Point-of-care testing of plasma free hemoglobin and hematocrit for mechanical circulatory support

Hematological analysis is essential for patients who are supported by a mechanical circulatory support (MCS). The laboratory methods used to analyze blood components are conventional and accurate, but they require a mandatory turn-around-time for laboratory results, and because of toxic substances, can also be hazardous to analysis workers. Here, a simple and rapid point-of-care device is developed for the measurement of plasma free hemoglobin (PFHb) and hematocrit (Hct), based on colorimetry. The device consists of camera module, minimized centrifuge system, and the custom software that includes the motor control algorithm for the centrifuge system, and the image processing algorithm for measuring the color components of blood from the images. We show that our device measured PFHb with a detection limit of 0.75 mg/dL in the range of (0–100) mg/dL, and Hct with a detection limit of 2.14% in the range of (20–50)%. Our device had a high correlation with the measurement method generally used in clinical laboratories (PFHb R = 0.999, Hct R = 0.739), and the quantitative analysis resulted in precision of 1.44 mg/dL for PFHb value of 14.5 mg/dL, 1.36 mg/dL for PFHb value of 53 mg/dL, and 1.24% for Hct 30%. Also, the device can be measured without any pre-processing when compared to the clinical laboratory method, so results can be obtained within 5 min (about an 1 h for the clinical laboratory method). Therefore, we conclude that the device can be used for point-of-care measurement of PFHb and Hct for MCS.

Integrity of serum samples is changed by modified centrifugation conditions

Background Serum samples should be centrifuged for at least 10 min at 1300-2500 × g. Changed centrifugation conditions could compromise sample quality. The objective of this study was to compare the serum quality and turnaround time (TAT) using different centrifugation conditions. Methods The study was done in four different periods (A, B, C and D) at different conditions: for 10, 5 and 7 (A, B and C, respectively) at 2876 × g, and 7 (D) min at 4141 × g. Sample quality was assessed as the proportion of samples with: (a) aspiration errors, (b) H index >0.5 g/L and (c) suppressed reports of potassium (K) due to hemolysis. TAT was calculated for emergency samples. The proportions of samples (a), (b) and (c) were compared according to period A. Results The number of aspiration errors was significantly higher in samples centrifuged at 2876 × g for 5 min (p = 0.021) and remained unchanged when centrifuged for 7 min (p = 0.066 and 0.177, for periods C and D, respectively). In periods B, C and D, the proportion of samples with hemolysis was higher than that in period A (p-values 0.039, 0.009 and 0.042, respectively). TAT differed between all periods (p < 0.001), with the lowest TAT observed for B and D. The lowest number of samples exceeding 60-min TAT was observed in period D (p = 0.011). Conclusions The integrity of serum samples is changed with different centrifugation conditions than those recommended. Our study showed that shorter centrifugation at higher force (7 min at 4141 × g) significantly decreases TAT, with unchanged proportion of samples with aspiration errors.

Portable Device for Measuring Blood Test Hemolyzed Samples Based on Computer Vision and Neural Network

Hemolysis is a challenging problem and still represents a frequent source of errors in blood test laboratory practice. Due to the broad and heterogeneous bias induced in the measurement of several parameters by hemolysis, inaccurate results may be reported, and the patient may be required to repeat sample collection, delaying diagnosis. Existing automated laboratory devices including hemolysis detection are not suitable for lower volume and smaller sample collection sites. In many situations, hemolysis is still detected by visual inspection of the sample after centrifugation, during the blood test pre-analytical stage. Visual inspection is highly dependent on a qualified workforce, subjective to interpretation discrepancies, and thus difficult to standardize. The paper aims to describe the design and performance of a portable device for measuring hemolyzed samples based on computer vision and neural network. The results indicate that the device provides hemolysis indexes with sufficient accuracy to guide laboratory decision in the blood test pre-analytical stage.

Haemolysis index for the screening of intravascular haemolysis: a novel diagnostic opportunity?

The diagnostic approach to patients with intravascular haemolysis remains challenging, since no first-line laboratory test seems to be entirely suitable for the screening of this condition. Recent evidence shows that an enhanced cell-free haemoglobin (fHb) concentration in serum or plasma is a reliable marker of red blood cell injury, and may also predict clinical outcomes in patients with different forms of haemolytic anaemias. However, the routine use of the haemiglobincyanide assay, the current reference method for measuring fHb, seems unsuitable for a timely diagnosis of intravascular haemolysis, for many safety and practical reasons. The spectrophotometric assessment of fHb by means of the so-called haemolysis-index (H-index) has now become available in most clinical chemistry analysers. This measure allows an accurate, rapid and inexpensive assessment of fHb in a large number of serum or plasma samples, and its use has already proven to be useful for identifying some forms of haemolytic anaemias. Therefore, the aim of this article is to provide an update and a personal opinion about the potential clinical use of the H-index for screening patients with suspected intravascular haemolysis.

Review of the clinical applications and technological advances of circulating tumor DNA in cancer monitoring

Circulating cell-free DNA (cfDNA) released by tumor cells, termed ctDNA, closely reflects the heterogeneity of primary cancers and their metastases. As a noninvasive, real-time monitoring biomarker, ctDNA is a promising tool for detecting driver gene mutations, assessing tumor burden and acquired resistance, and early diagnosis. However, isolation and enrichment of cfDNA is a big challenge due to the high degree of DNA fragmentation and its relatively low abundance in the bloodstream. This review aims to provide insights into the recent technological advances in acquisition of optimal quality cfDNA, the use of preservatives, isolation methods, processing timelines, and detection techniques. It also describes clinical applications of ctDNA in cancer patient management.

High Hemoglobin Is an Independent Risk Factor for the Development of Hemolysis During Pediatric Extracorporeal Life Support

OBJECTIVE

To evaluate risk factors for hemolysis in pediatric extracorporeal life support.

DESIGN

Retrospective, single-center study.

SETTING

Pediatric intensive care unit.

PATIENTS

Two hundred thirty-six children who received extracorporeal membrane oxygenation.

INTERVENTIONS

None.

MEASUREMENTS AND MAIN RESULTS

Risk factors for hemolysis were retrospectively analyzed from a single center in a total of 236 neonatal and pediatric patients who received extracorporeal membrane oxygenation support (ECMO). There was no difference in the incidence of hemolysis between centrifugal (127 patients) and roller head (109 patients) pump type or between venoarterial and venovenous ECMO. High hemoglobin (Hb) was found to be an independent risk factor for hemolysis in both pump types. The Hb level >12 g/dL was significant in the roller group and the Hb level >13 g/dL was significant in the centrifugal group for the development of hemolysis for the cumulative ECMO run. The presence of high Hb levels on any given day increased the risk of hemolysis for that day of the ECMO run regardless of ECMO pump type. Higher revolutions per minute (RPMs) and higher inlet pressures on any given day increased the risk for the development of hemolysis in the centrifugal pump. Lower inlet venous pressures and RPMs were not associated with hemolysis in the roller group.

CONCLUSIONS

An Hb level greater than 13 g/dL was associated with an increased risk of hemolysis, and a high Hb on a given day was associated with a significantly higher risk of hemolysis on the same day. Higher RPMs and lower inlet venous pressures were associated with an increased risk of hemolysis in the centrifugal pump only.