A New 3D 10-Connected Cd(II) Based MOF With Mixed Ligands: A Dual Photoluminescent Sensor for Nitroaroamatics and Ferric Ion

Cadmium Dicyanoaurates and Their Reaction with Ammonia

The synthesis and crystal structures of two anionic cadmium dicyanoaurate coordination polymers, [nBu4N]6[(Cd4Cl4)2(Au(CN)2)12][CdCl4] (TCCA) and [nBu4N]2[Cd(Au(CN)2)4], and their reaction with ammonia vapour is reported. TCCA and the isostructural [nBu4N]6[(Cd4Br4)2(Au(CN)2)12][CdBr4] form 3-D arrays with [Cd4X4]4+ (X=Cl, Br) cubane clusters linked from each octahedral Cd(II) centre by three bridging [Au(CN)2]- units. TCCA reacts with ammonia with concentrations of 1000 ppm or higher to give a product with a quantum yield of 0.88, while [nBu4N]2[Cd(Au(CN)2)4], which forms a 2-D anionic Cd[Au(CN)2]2 sheet structure with axially pendant [Au(CN)2]- units, reacts with concentrated ammonia vapour to generate Cd(NH3)2[Au(CN)2]2; this has a similar 2-D sheet structure but with axial NH3 units. Vibrational spectroscopy illustrated that the reaction of both Cd/[Au(CN)2]-based materials with ammonia proceeded by breaking Cd-NC bonds. For [nBu4N]2[Cd(Au(CN)2)4], this results in decomposition into [nBu4N][Au(CN)2] ⋅ 0.5H2O and Cd(NH3)2[Au(CN)2]2, while the reaction of ammonia with TCCA is reversible by heating the ammonia-bound sample above 110 °C. Cd[Au(CN)2]2 can be prepared by thermal removal of NH3 units from Cd(NH3)2[Au(CN)2]2.

A New Cd(II)-Based Coordination Polymer for Efficient Photocatalytic Removal of Organic Dyes

Coordination polymers (CPs) are a diverse class of multi-dimensional compounds that show promise as photocatalysts for degrading dyes in polluted water. Herein, a new 1D Cd(II)-based coordination polymer with the formula [Cd(bpyp)(nba)2] (1) (bpyp = 2,5-bis(pyrid-4-yl)pyridine and Hnba = 4-nitrobenzoic acid) is synthesized and characterized. In 1, the two carboxyl groups of two different nba- ligands show μ2-η1:η1 and μ1-η1:η1 coordination modes to connect the CdII centers and sit on either side of the chain along the b direction. The produced CP 1 was utilized as the photocatalyst in the process of the photodegradation of methyl blue (MB), methyl orange (MO), rhodamine B (RhB), and methyl violet (MV) dyes when exposed to UV light. The photocatalytic degradation activities of CP 1 were analyzed, and the results suggest that it exhibits an extraordinary efficiency in the degradation of MB, MV, MO, and RhB. RhB has a 95.52% efficiency of degradation, whereas MV has a 58.92% efficiency, MO has 35.44%, and MB has 29.24%. The photodecomposition of dyes is catalyzed mostly by •O2- and •OH-, as shown by research involving the trapping of radicals.

Selective Supramolecular Recognition of Nitroaromatics by a Fluorescent Metal-Organic Cage Based on a Pyridine-Decorated Dibenzodiaza-Crown Macrocyclic Co(II) Complex

Two isomorphous fluorescent (FL) lantern-shaped metal-organic cages 1 and 2 were prepared by coordination-directed self-assembly of Co(II) centers with a new aza-crown macrocyclic ligand bearing pyridine pendant arms (L_py). The cage structures were determined using single-crystal X-ray diffraction analysis, thermogravimetric, elemental microanalysis, FT-IR spectroscopy, and powder X-ray diffraction. The crystal structures of 1 and 2 show that anions (Cl^- in 1 and Br^- in 2) are encapsulated within the cage cavity. 1 and 2 bear two coordinated water molecules that are directed inside the cages, surrounded by the eight pyridine rings at the "bottom" and the "roof" of the cage. These hydrogen bond donors, π systems, and the cationic nature of the cages enable 1 and 2 to encapsulate the anions. FL experiments revealed that 1 could detect nitroaromatic compounds by exhibiting selective and sensitive fluorescence quenching toward p-nitroaniline (PNA), recommending a limit of detection of 4.24 ppm. Moreover, the addition of 50 μL of PNA and o-nitrophenol to the ethanolic suspension of 1 led to a significant large FL red shift, namely, 87 and 24 nm, respectively, which were significantly higher than the corresponding values observed in the presence of other nitroaromatic compounds. The titration of the ethanolic suspension of 1, with various concentrations of PNA (>12 μM) demonstrated a concentration-dependent emission red shift. Hence, the efficient FL quenching of 1 was capable of distinguishing the dinitrobenzene isomers. Meanwhile, the observed red shift (10 nm) and quenching of this emission band under the influence of a trace amount of o- and p-nitrophenol isomers also showed that 1 could discriminate between o- and p-nitrophenol. Replacement of the chlorido with a bromido ligand in 1 generated cage 2 which was a more electron-donating cage than 1. The FL experiments showed that 2 was partially more sensitive and less selective toward NACs than 1.

Series of TM-OFs as a Platform for Efficient Catalysis and Multifunctional Luminescence Sensing

Three novel porous transition-metal-organic frameworks (TM-OFs), formulated as [Co₃(DCPN)₂(μ₂-OH₂)₄(H₂O)₄](DMF)₂ (1), [Cd₃(DCPN)₂(μ₂-OH₂)₄(H₂O)₄](DMF)₂ (2), and [CdK(DCPN)(DMA)] (3), have been successfully prepared via solvothermal conditions based on a 5-(3',6'-dicarboxylic phenyl) nicotinic carboxylic acid (H₃DCPN) ligand. 1 and 2 both have the same porous 3D network structure with the point symbol of {4¹⁰·6¹⁴·8⁴}·{4⁵·6}₂ based on trinuclear ({Co₃} or {Cd₃}) clusters, indicating a one-dimensional porous channel, and possess excellent water and thermal stability; 3 also displays a porous 3D network structure with a 4-connected sra topology based on the heteronuclear metal cluster {CdK}. Complex 1 can be used to load Pd nanoparticles (Pd NPs) via a wetness impregnation strategy to obtain Pd@1. The reduction of nitrophenols (2-NP, 3-NP, 4-NP) by Pd@1 in aqueous solution shows outstanding conversion, excellent rate constants (k), and remarkable cycling stability due to the synergistic effect of complex 1 and Pd NPs. Luminescence sensing tests confirmed that 2 is a reliable multifunctional chemical sensor with high selectivity and sensitivity for low concentrations of Fe³⁺, Cr₂O₇^2-, CPFX, and NFX. Specifically, 2 shows a fluorescence enhancement behavior toward fluoroquinolone antibiotics (CPFX and NFX), which has not been reported previously in the literature. Moreover, the rational mechanism of fluorescence sensing was also systematically investigated by various detection means and theoretical calculations.

Triazole-Based Cu(I) Cationic Metal-Organic Frameworks with Lewis Basic Pyridine Sites for Selective Detection of Ce3+ Ions

A highly symmetric bis-triazole-pyridine-based organic ligand, i.e., 3,5-di(4H-1,2,4-triazol-4-yl)pyridine (L), and Cu(II) salts were used to synthesize three cationic Cu(I) metal-organic frameworks (MOFs), namely, {[Cu(L)]·(NO₃)·(H₂O)}_n (1), {[Cu(L)]·(BF₄)·0.5H₂O}_n (2), and {[Cu_1.25(L)]·1.25(ClO₄)·H₂O}_n (3). All three MOFs have nonbonded anions situated inside the pore spaces. Both 1 and 2 have a two-dimensional network structure, while 3 has a three-dimensional structure. All three MOFs were characterized using Fourier transform infrared spectroscopy, elemental (C, H, and N) analysis, thermogravimetric analysis, and powder and single-crystal X-ray diffraction. Due to the presence of a Lewis basic pyridine moiety, these MOFs could serve as luminescent probes for the selective detection of Ce³⁺ ions with excellent efficiency (10^-7 M). The synthesis of Cu(I)-based MOFs and their use to detect Ce³⁺ ions in water via a turn-on fluorescence process have rarely been reported. These MOFs are highly stable in water, are recyclable, and function efficiently at different pH values.

Carbazole-Equipped Metal-Organic Framework for Stability, Photocatalysis, and Fluorescence Detection

The useful yet underutilized backfolded design is invoked here for functionalizing porous solids with the versatile carbazole function. Specifically, we attach carbazole groups as backfolded side arms onto the backbone of a linear dicarboxyl linker molecule. The bulky carbazole side arms point away from the carboxyl links and do not disrupt the Zr-carboxyl framework formation; namely, the resultant MOF solid ZrL1 features the same net as that of the unfunctionalized dicarboxyl linker, also known as the PCN-111 net or UiO-66 net. The ZrL1 structure features only half linker occupancy (about 6 out of the 12 linkers around the Zr₆O₈ cluster being missing) and partially collapses upon activation (acetone exchange and evacuation). Notably, the stability improves after heating in diphenyl oxide at 260 °C (POP-260 treatment; to form ZrL1-260), as indicated by the higher crystallinity and surface area of the activated ZrL1-260 sample. The ZrL1-260 samples achieve 72% yield in photocatalyzing reductive dehalogenation of phenacyl bromide; ZrL1 can detect nitro-aromatic compounds via fluorescence quenching, with selectivity and sensitivity toward 4-nitroaniline, featuring a limit of detection of 96 ppb.

Synthesis of various dimensional metal organic frameworks (MOFs) and their hybrid composites for emerging applications - A review

Metal organic frameworks (MOFs) represent the organic and inorganic hybrid porous materials. MOFs are low dense and highly porous materials which in turn provide large surface area that can accumulate and store numerous molecules within the pores. The pore size may also act as a mesh to separate molecules. The porous nature of MOFs is beneficial for altering the intrinsic properties of the materials. Over the past decade, different types of hybrid MOFs have been reported in combination with polymers, carbon materials, metal nanoparticles, metal oxides, and biomolecules for various applications. MOFs have also been used in the fabrication of electronic devices, sensors, energy storage, gas separation, supercapacitors, drug delivery and environmental clean-up. In this review, the unique structural orientation, exceptional properties and recent applications of MOFs have been discussed in the first section along with their porosity, stability and other influencing factors. In addition, various methods and techniques involved in the synthesis and designing of MOFs such as solvothermal, electrochemical, mechanochemical, ultrasonication and microwave methods are highlighted. In order to understand the scientific feasibility of MOFs in developing new products, various strategies have been applied to obtain different dimensional MOFs (0D, 1D, 2D and 3D) and their composite materials are also been conferred. Finally, the future prospects of MOFs, remaining challenges, research gaps and possible solutions that need to be addressed by advanced experimental design, computational models, simulation techniques and theoretical concepts have been deliberated.

Ultrasound Irradiation Assisted Synthesis of Luminescent Nano Amide-Functionalized Metal-Organic Frameworks; Application Toward Phenol Derivatives Sensing

Two nano amide-functionalized metal-organic frameworks (MOFs) with molecular formula [Co(oba) (bpta)]·(DMF)₂ TMU-50 and [Co₂(oba)₂ (bpfn)]·(DMF)_2.5 TMU-51 obtained under ultrasonic method without any surfactants. The only difference between the two selected amide functionalized pillar ligands, N,N′-bis(4-pyridinyl)-terephthalamide (bpta), and N,N′-bis-(4-pyridylformamide)-1,5-naphthalenediamine (bpfn), is related to the naphthyl group, which led to the different luminescence properties of the nano frameworks. In this study, the special ability of the luminescent nano MOFs were investigated to sensitize nitroaromatic compounds. Due to its unique and porous framework, Nano TMU-50 shows a good sensitivity towards nitro phenol by strong fluorescence emission with a detection limit of 2 × 10^–3 mM⁻¹. Both nano MOF structures were characterized via many analyses such as powder X-ray diffraction, Field Emission Scanning Electron Microscopy (FE-SEM), elemental analysis, and FTIR spectroscopy. Moreover, the effect of a number of important parameters including initial reagent concentrations, power of ultrasound, time on morphology, and size of nano structures were examined. According to the fluorescence titration results, the activated nano-TMU-50 detected NP selectively with a quick response.

A Multifunctional 3D Supermolecular Co Coordination Polymer With Potential for CO2 Adsorption, Antibacterial Activity, and Selective Sensing of Fe3+/Cr3+ Ions and TNP

A 3D supermolecular structure [Co₃(L)₂ (2,2′-bipy)₂](DMF)₃(H₂O)₃ 1) (H₃L = 4,4′,4″-nitrilotribenzoic acid) has been constructed based on H₃L, and 2,2′-bipy ligands under solvothermal conditions. Compound 1 can be described as a (3, 6)-connected kgd topology with a Schläfli symbol (4³)₂(4⁶.6⁶.8³) formed by [Co₃(CO₂)₆] secondary building units. The adsorption properties of the activated sample 1a has been studied; the result shows that 1a has a high adsorption ability: the CO₂ uptakes were 74 cm³·g⁻¹ at 273 K, 50 cm³·g⁻¹ at 298 K, the isosteric heat of adsorption (Q_st) is 25.5 kJ mol⁻¹ at zero loading, and the N₂ adsorption at 77 K, 1 bar is 307 cm³ g⁻¹. Magnetic measurements showed the existence of an antiferromagnetic exchange interaction in compound 1, besides compound 1 exhibits effective luminescent performance for Fe³⁺/Cr³⁺ and TNP.

Synthesis and characterization of novel tricyanofuran hydrazone probe: solvatochromism, density-functional theory calculation and selective fluorescence, and colorimetric determination of iron (III)

A tricyanofuran hydrazone (TCFH) spectroscopic probe was produced to visually recognize Fe(III) ions in aqueous environments. The synthesis was started by reacting tricyanofuran with 4-aminophenol diazonium chloride. All the synthesized compounds were characterized by spectroscopic analyses. TCFH showed distinctive solvatochromic behaviour in various organic polar solvents due to intramolecular charge transfer. Its behaviour towards sensing Fe(III) was studied using ultraviolet-visible spectrophotometry. The sensing behaviours of the proposed probe for other metal ions, namely Co(II), Cr(III), Mg(II), Pb(II), Cd(II), Ba(II), Hg(II), Mn(II), Ni(II), Cu(II), Zn(II), Ca(II), Al(III), Na(I) and K(I), were also investigated, but no spectral changes were observed, indicating the probe's potential use as a highly selective and Fe(III)-sensitive colorimetric and fluorescent chemical sensor. The TCFH probe using EtOH/H₂ O (5:1; v/v) served as a colorimetric and fluorescent chemosensor for identification of Fe(III) by the naked eye owing to both its high sensitivity and selectivity towards Fe(III) compared with the other examined metal ions. The proposed TCFH probe can therefore be utilized as an effective spectroscopic sensor for Fe(III). Both colorimetric and fluorescence recognition of the analyte depended on the concentration of Fe(III) ions and was accomplished at a pH of 7. A rapid colour change from yellow to red occurred when an aqueous solution of Fe(III) ions was added. The intensity of the colour increased at higher Fe(III) concentrations. Cyclic voltammetry measurements in the dimethylformamide solvent indicated a nonreversible redox potential. This study also explained the possible mechanisms for both solvatochromism and the detection of Fe(III) through TCFH-Fe(III) complex formation. The binding constant of the generated TCFH-Fe(III) complex was explored. Computational modelling was conducted to explain the deprotonation-triggered changes that occur in the photophysical properties of TCFH dyes.

Two Cd-Based Luminescent Coordination Polymers Constructed from a Truncated Linker

Two cadmium coordination polymers, WSU-30 and WSU-31, were synthesized through solvothermal methods by using the low-symmetry TPE-based linker m-H₄ETTC. The m-H₄ETTC linker and both coordination polymers were fully characterized by using single-crystal X-ray diffraction, infrared spectroscopy, and photoluminescent emission spectroscopy. Structural analysis of WSU-30 and WSU-31 showed that each compound contains previously unknown tetranuclear cadmium(II) secondary building units. The topological analysis revealed that the 4,8-connected net of WSU-30 contains the underlying topology, alb-4,8-P21/c-1, while the mixed linker WSU-31 possesses a 3,10-connected net known as 3,10T31 topology. If the m-ETTC linker is considered as two 3-connected nodes, WSU-30 possesses a very rare 3,3,8-connected 3,3,8T25 topology, and WSU-31 possesses a previously unknown 3,12-connected net, named 3,12T61.

Four structural diversity MOF-photocatalysts readily prepared for the degradation of the methyl violet dye under UV-visible light

The photocatalytic results demonstrated that all of them displayed efficient photocatalytic performances towards the degradation of methyl violet. The mechanism has been proposed.

Synthesis of multifunctional metal–organic frameworks and tuning the functionalities with pendant ligands

Multifunctional metal–organic frameworks synthesized from ligands with various organic functional pendants show high gas adsorption, photoluminescence, and chemical sensing properties, being tuned by the pendants.

Two d10 luminescent metal–organic frameworks as dual functional luminescent sensors for (Fe3+,Cu2+) and 2,4,6-trinitrophenol (TNP) with high selectivity and sensitivity

Two luminescent 3D supramolecular structures which serve as effective luminescent sensors for Fe³⁺, Cu²⁺ and TNP via luminescent quenching have been synthesized under solvothermal conditions.

Recent advances in MOF-based photocatalysis: environmental remediation under visible light

Highly photoactive MOFs can be engineered via various strategies for the purpose of extended visible light absorption, more efficient generation, separation and transfer of charge carriers, as well as good recyclability.

Multifunctional fluorescence responses of phenyl-amide-bridged d10 coordination polymers structurally regulated by dicarboxylates and metal ions

Metal/carboxylate co-induced 1D → 3D phenyl-amide-bridged d¹⁰ coordination polymers that show multifunctional fluorescent responses for cations, anions and pesticides.

From lamellar net to bilayered-lamella and to porous pillared-bilayer: reversible crystal-to-crystal transformation, CO2 adsorption, and fluorescence detection of Fe3+, Al3+, Cr3+, MnO4−, and Cr2O72− in water

Layered coordination polymers of different network topologies have showed reversible structural transformations and fluorescence detection toward Fe³⁺, Al³⁺, Cr³⁺, MnO₄^–, and Cr₂O₇^2– in water.

Different effects in the selective detection of aniline and Fe3+ by lanthanide-based coordination polymers containing multiple reactive sites

Isostructural Ln-CPs (1-Eu and 2-Tb) show almost the same high detection ability for Fe³⁺ and different detection abilities for aniline. The detection difference was studied through PXRD, UV-vis, luminescence lifetimes and Hirshfeld surface analysis.

A Water-Stable Terbium(III)-Organic Framework as a Chemosensor for Inorganic Ions, Nitro-Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro-compounds, excessive Fe³⁺ and MnO₄ ^- , is crucial for human health and environmental protection. Here, a new terbium(III)-organic framework, namely [Tb(TATAB)(H₂ O)]⋅2H₂ O (Tb-MOF, H₃ TATAB=4,4',4''-s-triazine-1,3,5-triyltri-m-aminobenzoic acid), was assembled and characterized. The Tb-MOF exhibits a water-stable 3D bnn framework. Due to the existence of competitive absorption, Tb-MOF has a high selectivity for detecting Fe³⁺ , MnO₄ ^- , 4-nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb-MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III -based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro-compounds, and antibiotics simultaneously.