Improved Thermoelectric Properties and Environmental Stability of Conducting PEDOT:PSS Films Post-treated With Imidazolium Ionic Liquids

Hydrogel-based bimodal sensors for high-sensitivity independent detection of temperature and strain

Avoiding crosstalk between strain and temperature detection is crucial for bimodal hydrogel sensors, yet achieving high sensitivity for both parameters while maintaining signal decoupling remains a significant challenge. In this study, a bimodal sensor was developed by locally coating poly (3,4-ethylene dioxythiophene): polystyrene sulfonate (PEDOT: PSS) onto the hydrogel surface, creating distinct regions for strain and temperature detection. These regions form localized strain concentration zones and wrinkle structures, respectively. The localized strain concentration enhances the sensor's sensitivity from 8.5 to 18.5. Additionally, the sensor demonstrates a low detection limit (0.2 %), a wide detection range (up to 1356 %), a fast response time, and excellent cyclic stability for strain measurements. The temperature detection region, leveraging the thermoelectric effect, improves the Seebeck coefficient of the PEDOT: PSS coating from 20 to 122.86 μVK-1 through de-doping and energy band modulation. Moreover, the temperature sensing of the PEDOT: PSS coating features good cyclic stability, a rapid response time, and versatile testing capabilities. This innovative structural design effectively decouples strain and temperature signals across a broad strain range (0-600 %). These sensors hold potential applications in human health monitoring and as electronic skin for flexible robotics.

Enhancing the Electrical Conductivity and Long-Term Stability of PEDOT:PSS Electrodes through Sequential Treatment with Nitric Acid and Cesium Chloride

Solution-processable poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is an important polymeric conductor used extensively in organic flexible, wearable, and stretchable optoelectronics. However, further enhancing its conductivity and long-term stability while maintaining its superb mechanical properties remains challenging. Here, a novel post-treatment approach to enhance the electrical properties and stability of sub-20-nm-thin PEDOT:PSS films processed from solution is introduced. The approach involves a sequential post-treatment with HNO3 and CsCl, resulting in a remarkable enhancement of the electrical conductivity of PEDOT:PSS films to over 5500 S cm-1, along with improved carrier mobility. The post-treated films exhibit remarkable air stability, retaining over 85% of their initial conductivity even after 270 days of storage. Various characterization techniques, including X-ray photoelectron spectroscopy, atomic force microscopy, Raman spectroscopy, Hall effect measurements, and grazing incidence wide angle X-ray scattering, coupled with density functional theory calculations, provide insights into the structural changes and interactions responsible for these improvements. To demonstrate the potential for practical applications, the ultrathin PEDOT:PSS films are connected to an inorganic light-emitting diode with a battery, showcasing their suitability as transparent electrodes. This work presents a promising approach for enhancing the electrical conductivity of PEDOT:PSS while offering a comprehensive understanding of the underlying mechanisms that can guide further advances.

Advances in the Fabrication, Properties, and Applications of Electrospun PEDOT-Based Conductive Nanofibers

The production of nanofibers has become a significant area of research due to their unique properties and diverse applications in various fields, such as biomedicine, textiles, energy, and environmental science. Electrospinning, a versatile and scalable technique, has gained considerable attention for its ability to fabricate nanofibers with tailored properties. Among the wide array of conductive polymers, poly(3,4-ethylenedioxythiophene) (PEDOT) has emerged as a promising material due to its exceptional conductivity, environmental stability, and ease of synthesis. The electrospinning of PEDOT-based nanofibers offers tunable electrical and optical properties, making them suitable for applications in organic electronics, energy storage, biomedicine, and wearable technology. This review, with its comprehensive exploration of the fabrication, properties, and applications of PEDOT nanofibers produced via electrospinning, provides a wealth of knowledge and insights into leveraging the full potential of PEDOT nanofibers in next-generation electronic and functional devices by examining recent advancements in the synthesis, functionalization, and post-treatment methods of PEDOT nanofibers. Furthermore, the review identifies current challenges, future directions, and potential strategies to address scalability, reproducibility, stability, and integration into practical devices, offering a comprehensive resource on conductive nanofibers.

Enhanced Microstructural Uniformity in Sulfuric-Acid-Treated Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) Films Using Raman Map Analysis

Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films have emerged as potential alternatives to indium-tin oxide as transparent electrodes in optoelectronic devices because of their superior transparency, flexibility, and chemical doping stability. However, pristine PEDOT:PSS films show low conductivities because the insulating PSS-rich domains isolate the conductive PEDOT-rich domains. In this study, the conductivities and corresponding spatially resolved Raman properties of PEDOT:PSS thin films treated with various concentrations of H2SO4 are presented. After the PEDOT:PSS films are treated with the H2SO4 solutions, their electrical conductivities are significantly improved from 0.5 (nontreated) to 4358 S cm-1 (100% v/v). Raman heat maps of the peak shifts and widths of the Cα═Cβ stretching mode are constructed. A blueshift and width decrease of the Cα═Cβ Raman mode in PEDOT are uniformly observed in the entire measurement area (20 × 20 µm2), indicating that microstructural transitions are successfully accomplished across the area from the coiled to linear conformation and high crystallinity upon H2SO4 treatment. Thus, it is proved that comprehensive Raman map analysis can be easily utilized to clarify microstructural properties distributed in large areas induced by various dopants. These results also offer valuable insights for evaluating and optimizing the performance of other conductive thin films.

The Influence of Molecular Weights on Dispersion and Thermoelectric Performance of Alkoxy Side-Chain Polythiophene/Carbon Nanotube Composite Materials

In the development of wearable electronic devices, the composite modification of conductive polymers and single-walled carbon nanotubes (SWCNTs) has become a burgeoning research area. This study presents the synthesis of a novel polythiophene derivative, poly(3-alkoxythiophene) (P3(TEG)T), with alkoxy side chains. Different molecular weight variants of P3(TEG)T (P1-P4) were prepared and combined with SWCNTs to form composite materials. Density functional theory (DFT) calculations revealed a reduced bandgap for P3(TEG)T. Raman spectroscopy demonstrated π-π interactions between P3(TEG)T and SWCNTs, facilitating the dispersion of single-walled carbon nanotubes and the formation of a continuous conductive network. Among the composite films, P4/SWCNTs-0.9 exhibited the highest thermoelectric performance, with a power factor (PF) value of 449.50 μW m-1 K-2. The fabricated flexible thermoelectric device achieved an output power of 3976.92 nW at 50 K, with a tensile strength of 59.34 MPa for P4/SWCNTs. Our findings highlight the strong interfacial interactions between P3(TEG)T and SWCNTs in the composite material, providing an effective charge transfer pathway. Furthermore, an improvement in the tensile performance was observed with an increase in the molecular weight of the polymer used in the composite, offering a viable platform for the development of high-performance flexible organic thermoelectric materials.

Free-Standing, Water-Resistant, and Conductivity-Enhanced PEDOT:PSS Films from In Situ Polymerization of 3-Hydroxymethyl-3-Methyl-Oxetane

Free-standing films based on conducting polymers, such as poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS), offer many benefits over traditional metal electrodes for applications in flexible electronics. However, to ensure structural integrity when contacting aqueous environments and high levels of electrical conductivity, solution-processed polymers require additives that act as crosslinking agents and conductivity enhancers. In this work, a new approach is presented to fabricate water-resistant free-standing films of PEDOT:PSS and simultaneously increase their conductivity, using an oxetane compound as an additive. It is shown that at moderate temperatures, oxetane polymerizes within the PEDOT:PSS acidic medium, forming hydroxymethyl-substituted polyether compounds that form a network upon crosslinking with PSS. The polymer composite films show self-sustainability, structural stability in aqueous environments, and enhanced conductivity. Finally, the potential of the free-standing films as health-monitoring electrodes, specifically for human electrocardiography, is explored.

Real-Time Nitrate Ion Monitoring with Poly(3,4-ethylenedioxythiophene) (PEDOT) Materials

Nitrate (NO3) pollution in groundwater, caused by various factors both natural and synthetic, contributes to the decline of human health and well-being. Current techniques used for nitrate detection include spectroscopic, electrochemical, chromatography, and capillary electrophoresis. It is highly desired to develop a simple cost-effective alternative to these complex methods for nitrate detection. Therefore, a real-time poly (3,4-ethylenedioxythiophene) (PEDOT)-based sensor for nitrate ion detection via electrical property change is introduced in this study. Vapor phase polymerization (VPP) is used to create a polymer thin film. Variations in specific parameters during the process are tested and compared to develop new insights into PEDOT sensitivity towards nitrate ions. Through this study, the optimal fabrication parameters that produce a sensor with the highest sensitivity toward nitrate ions are determined. With the optimized parameters, the electrical resistance response of the sensor to 1000 ppm nitrate solution is 41.79%. Furthermore, the sensors can detect nitrate ranging from 1 ppm to 1000 ppm. The proposed sensor demonstrates excellent potential to detect the overabundance of nitrate ions in aqueous solutions in real time.

Organic thermoelectric generators: working principles, materials, and fabrication techniques

Organic thermoelectricity is a blooming field of research that employs organic (semi)conductors to recycle waste heat through its partial conversion to electrical power. Such a conversion occurs by means of organic thermoelectric generator (OTEG) devices. The recent process on the synthesis of novel materials and on the understanding of doping mechanisms to increase conductivity has tremendously narrowed the gap between laboratory research and their application in actual applications. This Feature Article intends to highlight the impressive progress in materials and fabrication techniques for OTEGs made in recent years.

Influence of Ionic Additives in the PEDOT:PSS Hole Transport Layers for Efficient Blue Perovskite Light Emitting Diodes

Ruddlesden-Popper (RP) perovskites have been gaining traction in the development of high-efficiency or blue-emitting perovskite light emitting diodes (PeLEDs) due to the unique energy funneling mechanism, which enhances photoluminescence intensity, and dimensional control, which enables spectral tuning. In a conventional p-i-n device structure, the quality of RP perovskite films, including grain morphology and defects, as well as device performance can be significantly influenced by the underlying hole-transport layer (HTL). Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is commonly used in several PeLEDs as an HTL because of its high electrical conductivity and optical transparency. Nonetheless, the energy level mismatch and exciton quenching caused by PEDOT:PSS often compromises PeLED performance. Herein, we investigate the mitigation of these effects through addition of work-function-tunable PSS Na to the PEDOT:PSS HTL and assess the impact on blue PeLED performance. Surface analysis of the modified PEDOT:PSS HTLs reveals a PSS-rich layer that alleviates exciton quenching at the HTL/perovskite interface. At an optimal concentration of 6% PSS Na addition, an improvement in the external quantum efficiency is observed, with champion blue and sky-blue PeLEDs achieving 4% (480 nm) and 6.36% (496 nm), respectively, while operation stability is prolonged by fourfold.

Highly Electrical Conductive PEDOT:PSS/SWCNT Flexible Thermoelectric Films Fabricated by a High-Velocity Non-solvent Turbulent Secondary Doping Approach

Materials based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) can be potentially employed as flexible thermoelectric generators (TEGs) to capture waste heat and generate electrical energy. Among various methods, secondary doping is an effective way to modulate its thermoelectric (TE) performance. Different from conventional measures such as dropping, soaking, and steam fumigation, strong shear is integrated with the doping process and termed high-velocity non-solvent turbulent secondary doping (HNTD). We systematically investigate the transformation of PEDOT:PSS during this procedure and the formation mechanism of its highly conductive pathway. It is illustrated that PEDOT:PSS experiences PSS swelling, the phase separation of PEDOT from PSS, the removal of isolated PSS, and the evolution of PEDOT to a linear conformation. These evolutions contribute to the substantial elevation of electrical conductivity (σ). Furthermore, by employing continuous single-walled carbon nanotube (SWCNT) networks as structural units, highly conductive flexible PEDOT:PSS/SWCNT TE thin films could be prepared without sacrificing the Seebeck coefficient (S). Additionally, the effect of HNTD and direct addition method on TE properties of composite films is also compared. Finally, the PEDOT:PSS composite film with 40 wt % SWCNTs by the HNTD method exhibits the maximized power factor (PF) of 501.31 ± 19.23 μW m^-1 K^-2 with σ of 4717.8 ± 41.51 S cm^-1 and S of 32.6 ± 0.13 μV K^-1 at room temperature. It is worth mentioning that the σ value 4717.8 ± 41.51 S cm^-1 is the highest among the composites based on commercial carbon fillers and organic semiconductors. Finally, a 6-leg TEGs prototype is assembled and illustrates an output power of 4.416 μW under a temperature difference (ΔT) of 58 K. It is thought that such a strategy may provide some guidelines for manufacturing PEDOT:PSS-based functional materials.

In Situ Observation of Morphological and Oxidation Level Degradation Processes within Ionic Liquid Post-treated PEDOT:PSS Thin Films upon Operation at High Temperatures

Organic thermoelectric thin films are investigated in terms of their stability at elevated operating temperatures. Therefore, the electrical conductivity of ethyl-3-methylimidazolium dicyanamide (EMIM DCA) post-treated poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) thin films is measured over 4.5 h of heating at 50 or 100 °C for different EMIM DCA concentrations. The changes in the electrical performance are correlated with changes in the film morphology, as evidenced with in situ grazing-incidence small-angle X-ray scattering (GISAXS). Due to the overall increased PEDOT domain distances, the resulting impairment of the interdomain charge carrier transport directly correlates with the observed electrical conductivity decay. With in situ ultraviolet-visible (UV-Vis) measurements, a simultaneously occurring reduction of the PEDOT oxidation level is found to have an additional electrical conductivity lowering contribution due to the decrease of the charge carrier density. Finally, the observed morphology and oxidation level degradation is associated with the deterioration of the thermoelectric properties and hence a favorable operating temperature range is suggested for EMIM DCA post-treated PEDOT:PSS-based thermoelectrics.

Flexible and Foldable Films of SWCNT Thermoelectric Composites and an S-Shape Thermoelectric Generator with a Vertical Temperature Gradient

Organic thermoelectric (TE) composites and flexible devices have gained a rapid development in recent decade. Herein, a flexible and foldable film of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)/single-walled carbon nanotube (PEDOT:PSS/SWCNT) composite is fabricated by post-treatment with an ionic liquid (IL), and an S-shape TE generator (TEG) is designed to harvest heat from human body via a vertical temperature gradient. After being post-treated with IL of bis(trifluoromethane)sulfonimide lithium salt (LiTFSI), the PEDOT:PSS/SWNCT composite displays an improved electrical conductivity from 1063 ± 80 to 1562 ± 170 S cm^-1, with an almost constant Seebeck coefficient of ∼21.9 μV K^-1 with a 30 wt % content of SWCNT. The TE properties exhibit excellent stability against repeated bending or folding cycles. Furthermore, an S-shape architecture is designed for TEG assembling, which enables effective utilization of a vertical temperature gradient between the human body and surroundings. The present study proposes a universal strategy for harvesting heat using a wearable TEG via a vertical temperature gradient, which represents great prospects for application in self-powered wearable electronics.

Synergistically Improving Flexibility and Thermoelectric Performance of Composite Yarn by Continuous Ultrathin PEDOT:PSS/DMSO/Ionic Liquid Coating

Combining fabrics with a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) coating is the most promising method to fabricate wearable thermoelectric (TE) devices. However, the high modulus, low strain, and low TE performance of PEDOT:PSS coating lead to poor flexibility and low power generation efficiency. In this study, dimethyl sulfoxide (DMSO) and ionic liquids (ILs) were selected as a modifier to enhance the flexibility and TE performance of PEDOT:PSS. Different from the penetrating structure and coil conformation of pristine PEDOT:PSS coating, a flexible continuous ultrathin layer of PEDOT:PSS/DMSO/1-ethyl-3-methylimidazolium dicyanamide (P/D/ED) with a linear conformation forms on the surface of cotton yarn. The morphology and structure of PEDOT:PSS and P/D/ED coating were characterized by FESEM, XPS, and Raman spectroscopy. Compared with the pristine PEDOT:PSS film, the P/D/ED film shows significantly reduced modules and enhanced strain and bending stability. Moreover, the TE performance of P/D/ED-coated yarn is significantly enhanced with nearly half mass loading. Based on this, a large-area wearable TE fabric with enhanced flexibility and TE performance was prepared. The output power density is 136.1 mW/m² at ΔT = 40.8 K, which is a typically high value compared with the former reported composite TE fabrics. This study provides a new way to synergistically enhance the flexibility and TE performance of composite yarn, and the prepared TE fabric has great potential as a wearable power source.

Correlation of Thermoelectric Performance, Domain Morphology and Doping Level in PEDOT:PSS Thin Films Post-Treated with Ionic Liquids

Ionic liquid (IL) post-treatment of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) thin films with ethyl-3-methylimidazolium dicyanamide (EMIM DCA), allyl-3-methylimidazolium dicyanamide (AMIM DCA), and 1-ethyl-3-methylimidazolium tetracyanoborate (EMIM TCB) is compared. Doping level modifications of PEDOT are characterized using UV-Vis spectroscopy and directly correlate with the observed Seebeck coefficient enhancement. With conductive atomic force microscopy (c-AFM) the authors investigate changes in the topographic-current features of the PEDOT:PSS thin film surface due to IL treatment. Grazing incidence small-angle X-ray scattering (GISAXS) demonstrates the morphological rearrangement towards an optimized PEDOT domain distribution upon IL post-treatment, directly facilitating the interconductivity and causing an increased film conductivity. Based on these improvements in Seebeck coefficient and conductivity, the power factor is increased up to 236 µW m^-1 K^{- 2} . Subsequently, a model is developed indicating that ILs, which contain small, sterically unhindered ions with a strong localized charge, appear beneficial to boost the thermoelectric performance of post-treated PEDOT:PSS films.

Structural modulation induced by cobalt-based ionic liquids for enhanced thermoelectric transport in PEDOT:PSS

Poly(3,4ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) has been intensively studied for its thermoelectric applications. Structural modulation to improve crystalline ordering, chain conformation and film morphology is a promising way to decouple the trade-off between conductivity and Seebeck coefficient and thus improve the thermoelectric power factor. Post treatment with ionic liquid ([CoCl₂  ⋅ 6H₂ O]:[ChCl]) bearing cobalt-containing anions resulted in a remarkable enhancement of the power factor to 76.8 μW m^-1  K^-2 . This IL combines the influence of a high-boiling polar organic solvent and diffusing ions. A high σ mainly resulted from the efficient removal of PSS chains, ordering of the structure and delocalization of bipoloran-dominant transport after conformational change. The increase in S was not due to dedoping of PEDOT chains, but rather the sharp feature of the density of states at the Fermi level induced by ion-exchange with unconventional anions.

Synergistically Boosting Thermoelectric Performance of PEDOT:PSS/SWCNT Composites via the Ion-Exchange Effect and Promoting SWCNT Dispersion by the Ionic Liquid

Poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is perhaps the most successful polymer material for thermoelectric (TE) applications. So far, treatments by high-boiling solvents, acid or base, or mixing with the carbon nanotube (CNT) are the main ways to improve its TE performance. Herein, we report the synergistically boosting TE properties of PEDOT:PSS/single-walled CNT (SWCNT) composites by the ionic liquid (IL). The composites are prepared by physically mixing the SWCNT dispersion containing the IL with PEDOT:PSS solution and subsequent vacuum filtration. The IL additive has two major functions, that is, inducing the phase separation of PEDOT:PSS and a linear quinoid conformation of PEDOT and promoting the SWCNT dispersion. The maximum power factor at room temperature reaches 182.7 ± 9.2 μW m^-1 K^-2 (the corresponding electrical conductivity and Seebeck coefficient are 1602.6 ± 103.0 S cm^-1 and 33.4 ± 0.4 μV K^-1, respectively) for the free-standing flexible film of the PEDOT:PSS/SWCNT composites with the IL, which is much higher than those of the pristine PEDOT:PSS, the IL-free PEDOT:PSS/SWCNT, and the SWCNT films. The high TE performance of composites can be ascribed to synergistic roles of the ion-exchange effect and promotion of SWCNT dispersion by the IL. This work demonstrates the dual roles for the IL in regulating each component of the PEDOT:PSS/SWCNT composite that synergistically boosts the TE performance.

Biocompatible, flexible and conductive polymers prepared by biomass-derived ionic liquid treatment

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a promising, biocompatible conductive polymer for bio-integrated electronics with health-care applications.