Highly Tunable Emission by Halide Engineering in Lead-Free Perovskite-Derivative Nanocrystals: The Cs2SnX6 (X = Cl, Br, Br/I, I) System

Enhanced photoluminescence of double perovskite Cs2SnI6 nanocrystals via Na+ doping

Double perovskites without lead element have attracted great attention in recent years. Further increasing the photoluminescence quantum yield of lead-free double perovskites is necessary for their potential applications. In this work, Na⁺ doped Cs₂SnI₆ nanocrystals were synthesized by hot injection method. It was displayed that all the NCs have uniform hexagonal shape with good crystallization. Energy dispersing spectroscopy and X-ray photoelectron spectroscopy proves the Na⁺ ions were doped in the lattice of perovskite structure. The photoluminescence intensity of doped NCs is increased by 2.7-fold than that of pure NCs. A maximum photoluminescence quantum yield of 72% is obtained. The luminous mechanism was investigated by femtosecond transient absorption spectrum and a self-trap emission was proved by the observation of ground state bleaching and photo-induced absorption signals.

Structural, electronic, magnetic and thermoelectric properties of Tl2 NbX6 (X = Cl, Br) variant perovskites calculated via density functional theory

This article presents detailed structural, electronic, magnetic, and thermoelectric properties of two experimentally existing isostructural variant perovskite compounds Tl₂ NbX₆ (X = Cl, Br) with the help of first principles calculations. As per requirement of stability in the device applications, the structural and thermodynamic stabilities were, respectively verified by tolerance factor and negative formation energies. The structural parameters in ferromagnetic phase were calculated and found in close agreement with the available experimental results. The electronic nature was found as half metallic from spin polarized calculations of electronic band structures and density of states, where the semiconductor nature was found in the spin down states and metallic nature in the spin up states. The magnetic moments of both the compounds were calculated as 1 μ_B majorly contributed by Nb atom. The Boltzmann transport theory was implemented via BoltzTraP for calculating the spin resolved thermoelectric parameters, such as Seebeck coefficient, electronic and thermal conductivities, and figure of merit. Overall, both the compounds were found suitable for use in spintronics and spin Seebeck effect for energy applications.

Admirable stability achieved by ns2 ions Co-doping for all-inorganic metal halides towards optical anti-counterfeiting

Optical materials play a momentous role in anti-counterfeiting field, such as authentication, currency and security. The development of tunable optical properties and optical responses to a range of external stimuli is quite imperative for the growing demand of optical anti-counterfeiting technology. Metal halide perovskites have attracted much attention of researchers due to their excellent optical properties. In addition, co-doping methods have been gradually applied to the research of metal halide perovskites, by which more abundant luminescence phenomena can be introduced into the host perovskite. Herein, the ns² ions of bismuth (Bi³⁺) and antimony (Sb³⁺) ions co-doped zero-dimensional Cs₂SnCl₆ metal halide with an excitation-wavelength-dependent emission phenomenon is synthesized as an efficient multimodal luminescent material, the luminescence of which is tunable and covers a wide region of color. What's more, a dynamic dual-emission phenomenon is captured when the excitation wavelength changes from 320 nm to 420 nm for Cs₂SnCl₆:Bi_0.08Sb_0.12 crystals. Moreover, the Bi³⁺ and Sb³⁺ doped metal halide material shows great enhancement in solvent resistance and thermal stability compared to the pristine Cs₂SnCl₆. The admirable stability and distinguishable photoluminescence (PL) phenomenon of this all-inorganic metal halide has great potential to be applied in optical anti-counterfeiting technology. Furthermore, the co-doping method can accelerate the discovery of new luminescence phenomena in original metal halide perovskites.

Ultra-stable blue-emitting lead-free double perovskite Cs2SnCl6 nanocrystals enabled by an aqueous synthesis on a microfluidic platform

Blue emitting Sn-based lead-free halide perovskite nanocrystals (NCs) are considered to be a promising material in lighting and displays. However, industrialised fabrication of blue-emitting NCs still remains a significant challenge due to the use of toxic solvents and optical instability, not mentioning in large-scale synthesis. In this work, a green-route synthesis of blue-emitting lead-free halide perovskite Cs₂SnCl₆ powders is developed, in which deionized water with a small amount of inorganic acid is used as the solvent and the synthesis of the Cs₂SnCl₆ powders is achieved on a microfluidic platform. Using the Cs₂SnCl₆ powders, we prepare Cs₂SnCl₆ NCs via an ultrasonication process. Changing the volume ratio of the ligands (oleic acid to oleylamine) can alter the photoluminescence (PL) characteristics of the prepared NCs, including the PL-peak wavelength, PL-peak intensity and quantum yield. The highest photoluminescence quantum yield (PLQY) of 13.4% is achieved by the Cs₂SnCl₆ NCs prepared with the volume ratio of oleic acid to oleylamine of 40 μL to 10 μL. A long-term PL stability test demonstrates that the as-synthesized Cs₂SnCl₆ NCs can retain a stable PLQY over a period of 60 days. This work opens up a new path for a large-scale green-route synthesis of blue-emitting Sn-based lead-free NCs, such as Cs₂SnX₆ (Cl, Br and I), towards their applications in optoelectronics.

Lead-free all-inorganic halide double perovskite materials for optoelectronic applications: progress, performance and design

The geometrical and electronic structures of all-inorganic halide double perovskites and their applications in optoelectronic devices are reviewed. Novel design methods are desirable to develop this type of perovskite with superior performance.

Down and up conversion luminescence of the lead-free organic metal halide material: (C9H8NO)2SnCl6·2H2O

The present work deals with the optical properties of hybrid organic metal halide material namely (C9H8NO)2SnCl6·2H2O. Its structure is built up from isolated [SnCl6]2- octahedral dianions surrounded by Hydroxyl quinolinium organic cations (C9H8NO)+, abbreviated as [HQ]+. Unlike the usual hybrid materials, where metal halide ions are luminescent semiconductors while the organic ones are optically inactive, [HQ]2SnCl6·2H2O contains two optically active entities: [HQ]+ organic cations and [SnCl6]2- dianions. The optical properties of the synthesized crystals were studied by optical absorption spectroscopy, photoluminescence measurements and DFT calculations of electronic density of states. These studies have shown that both organic and inorganic entities have very close HOMO-LUMO gaps and very similar band alignments favoring the resonant energy transfer process. In addition, measurements of luminescence under variable excitations reveal an intense green luminescence around 497 nm under UV excitation (down conversion) and infrared excitation (up conversion luminescence). The down conversion luminescence is assigned to the π-π* transition within the [HQ] + organic cations involving charge transfer between the organic and inorganic entities, whereas the up-conversion luminescence is based on the triplet-triplet annihilation mechanism (TTA).

Morphological and Optical Tuning of Lead-Free Cs2SnX6 (X = I, Br) Perovskite Nanocrystals by Ligand Engineering

In order to overcome the toxicity of lead halide perovskites, in recent years the research has focused on replacing lead with more environmentally friendly metals like tin, germanium, bismuth or antimony. However, lead-free perovskites still present instability issues and low performances that do not make them competitive when compared to their lead-based counterparts. Here we report the synthesis of lead-free Cs2SnX6 (X = Br, I) nanostructures of different shapes by using various surface ligands. These compounds are a promising alternative to lead halide perovskites in which the replacement of divalent lead (Pb(II)) with tetravalent tin (Sn(IV)) causes a modification of the standard perovskite structure. We investigate the effects of different amines on the morphology and size of Cs2SnX6 (X = Br, I) nanocrystals, presenting a facile hot-infection method to directly synthesize three-dimensional (3D) nanoparticles as well as two-dimensional (2D) nanoplatelets. The amines not only modify the shape of the crystals, but also affect their optical properties: increasing the length of the amine carbon chain we observe a widening in the bandgap of the compounds and a blue-shift of their emission peak. Alongside the tuning of the chemical composition and the reduction of the crystal size, our study offers a new insight in controlling the physical properties of perovskite nanocrystals by means of the capping ligands, paving the way for future research on lead-free materials.

Germanium-Based Halide Perovskites: Materials, Properties, and Applications

Perovskites are attracting an increasing interest in the wide community of photovoltaics, optoelectronic, and detection, traditionally relying on lead-based systems. This Minireview provides an overview of the current status of experimental and computational results available on Ge-containing 3D and low-dimensional halide perovskites. While stability issues analogous to those of tin-based materials are present, some strategies to afford this problem in Ge metal halide perovskites (MHPs) for photovoltaics have already been identified and successfully employed, reaching efficiencies of solar devices greater than 7 % at up to 500 h of illumination. Interestingly, some Ge-containing MHPs showed promising nonlinear optical responses as well as quite broad emissions, which are worthy of further investigation starting from the basic materials chemistry perspective, where a large space for properties modulation through compositions/alloying/fnanostructuring is present.

All-inorganic lead-free metal halide perovskite quantum dots: progress and prospects

Lead halide perovskite quantum dots have drawn worldwide attention due to their quantum confinement effect and excellent optical gain properties. It is worth noting that due to the toxicity of lead ions and the inherent instability of organic groups, research on all-inorganic lead-free metal halide perovskite quantum dots (ILFHPQDs) has become a hot spot in recent years. This paper summarizes the latest research progress of ILFHPQDs, analyzes the sources and limitations affecting the performance of ILFHPQDs, and provides the improvement methods. Firstly, the typical synthesis strategies of ILFHPQDs are discussed, followed by a focus on the structural characteristics, optoelectronic properties and stability of each type of ILFHPQD. Next, the applications of ILFHPQDs in devices are investigated. Finally, the challenges, solutions and future application directions of ILFHPQDs are prospected.

Lead-free cesium tin halide nanocrystals for light-emitting diodes and color down conversion

Organometal halide perovskites are attracting a great deal of attention because of their long carrier diffusion lengths, wide wavelength tunability, and narrow-band emission. However, the toxicity of lead has caused considerable environmental and health concerns. In this work, lead-free cesium tin halide nanocrystals are synthesized and investigated. CsSnBr3 and CsSnI3 nanocrystals, 25 and 7 nm in size, are synthesized by a facile hot injection method. Absorption spectroscopy, photoluminescence spectroscopy, and X-ray diffraction were used to understand their structural and optical properties. CsSnBr3 and CsSnI3 nanocrystals show emission peaks at 683 and 938 nm, respectively. These nanocrystals show shelf stability for a few months. Temperature-dependent photoluminescence is utilized to know more about fundamental physical parameters, such as exciton binding energy, charge carrier-phonon interactions and band gap. Light-emitting diodes and color down-conversion films are also demonstrated using these lead free perovskite nanocrystals.

Indium Doping of Lead-Free Perovskite Cs2SnI6

Structure and properties of an inorganic perovskite Cs₂SnI₆ demonstrated its potential as a light-harvester or electron-hole transport material; however, its optoelectronic properties are poorer than those of lead-based perovskites. Here, we report the way of light tuning of absorption and transport properties of cesium iodostannate(IV) Cs₂SnI₆ via partial heterovalent substitution of tin for indium. Light absorption and optical bandgaps of materials have been investigated by UV-vis absorption and photoluminescent spectroscopies. Low-temperature electron paramagnetic resonance spectroscopy was used to study the kind of paramagnetic centers in materials.

Versatile vapor phase deposition approach to cesium tin bromide materials CsSnBr3, CsSn2Br5 and Cs2SnBr6

We report on the successful application of RF-magnetron sputtering to deposit, by using a single type of target, three different materials in the form of thin films within the Cs-Sn-Br compositional range, namely, CsSnBr₃, CsSn₂Br₅ and Cs₂SnBr₆. It is shown that, by playing with the deposition parameters and post-deposition treatments, it is possible to stabilize these three perovskites or perovskite related compounds by exploiting the versatility of vapor phase deposition. Full characterization in terms of crystal structure, optical properties and morphology is reported. The power of vapor phase methods in growing all-inorganic materials of interest for photovoltaic and optoelectronic applications is demonstrated here, indicating the advantageous use of sputtering for these complex materials.