Perovskite Oxide-Based Materials for Photocatalytic and Photoelectrocatalytic Treatment of Water

First-principles prediction of half metallic-ferromagnetism in La0.25Sr0.75Sn0.4In0.25Ru0.35O3 and enhanced experimental electrical and magnetic behaviours

A successful mechanochemical synthesis of a new nanoscale semi-conductive perovskite, La0.25Sr0.75Sn0.4In0.25Ru0.35O3 (LSSIRuO) was achieved through co-doping of SrSnO3. XRD and IR analyses confirmed that the sample crystallized in a pure perovskite GdFeO3 type structure (Pnma space group). Diffuse reflectance measurements revealed a direct band gap of 1.3 eV, which was significantly narrowed compared to that of SrSnO3 (4.1 eV). The investigation of DFT calculations into the sextenary systems La0.25Sr0.75[Sn0.4Ru0.35]In0.25O3 and La0.25Sr0.75[Sn0.5Ru0.25]In0.25O3 has revealed semiconductor behavior, very close to a semiconductor-semi metal transition. Importantly, Arrhenius-type charge transport was confirmed through a temperature-dependent conductivity study of the sample, showing good electrical conductivity of 3.6 S m-1 at 513 K with an activation energy of Ea = 0.19 eV. Furthermore, the compound exhibited ferromagnetic ordering at temperatures lower than 155 K, contrasting the diamagnetic behavior of SrSnO3. The narrower band gap value (1.3 eV) and improved electrical properties of LSSIRuO, in addition to its ferromagnetic characteristics, distinguish it as a promising candidate for applications in optoelectronics, as well as in memory and spintronic devices.

Perovskite Oxides: Syntheses and Perspectives on Their Application for Nitrate Reduction

Over the decades, the rise in nitrate levels in the ecosystem has posed a serious threat to the continuous existence of humans, fauna, and flora. The deleterious effects of increasing levels of nitrates in the ecosystem have led to adverse health and environmental implications in the form of methemoglobinemia and eutrophication, respectively. Different pathways/routes for the syntheses of perovskites and their oxides were presented in this review. In recent times, electrocatalytic reduction has emerged as the most utilized technique for the conversion of nitrates into ammonia, an industrial feedstock. According to published papers, the efficiency of various perovskites and their oxides used for the electrocatalytic reduction of nitrate achieved a high Faradaic efficiency of 98%. Furthermore, studies published have shown that there is a need to improve the chemical stability of perovskites and their oxides during scale-up applications, as well as their scalability for industrial applications.

Efficient removal of the recalcitrant metamizole contaminant from drinking water by using a CaLaCoO9 perovskite supported on recycled polyethylene

Metamizole (MZ) is a widely used anti-inflammatory drug. Due to its common use, this contaminant is found in sewage and rivers. In order to reduce the contamination produced by the MZ, we fabricated in this work a photocatalytic composite using recycled polyethylene (RPE) and the CaLaCoO9 (LCCO) perovskite. Those nanoparticles had a microplate-like morphology and sizes of 1.4-5.5 µm according to the analysis of microscopy. The photocatalytic properties of the LCCO powders were evaluated under ultraviolet-visible (UV-Vis) irradiation and found a removal efficiency of 96%. When the RPE+LCCO composite was employed for the photocatalytic degradation of MZ, a maximum degradation of 92.5% was obtained. The influence of the pH on the photocatalytic activity was also studied and found that an initial pH = 3 produced a total degradation of MZ after 240 min of UV-Vis irradiation. Moreover, three reuse cycles were carried out for the pure LCCO powders and for the RPE+LCCO composites and found that the maximum loss of degradation was 5%. Furthermore, scavenger experiments demonstrated that the super oxide and hydroxyl radicals are formed during the photocatalytic reaction and were responsible for the degradation of MZ. Additionally, the X-ray photoelectron-spectroscopy and Raman analysis demonstrated the formation of defects (oxygen vacancies), those ones delayed the electron-hole recombination, which in turn, enhanced the degradation of the MZ. Thus, the studies performed in this work proved that composites made with recycled plastics and LCCO perovskites are a low-cost and feasible alternative for the cleaning of water sources polluted with pharmaceutical compounds.

Environmental remediation of hazardous pollutants using MXene-perovskite-based photocatalysts: A review

Photocatalysis utilizing semiconductors offer a cost-effective and promising solution for the removal of pollutants. MXene and perovskites, which possess desirable properties such as a suitable bandgap, stability, and affordability, have emerged as a highly promising material for photocatalytic activity. However, the efficiency of MXene and perovskites is limited by their fast recombination rates and inadequate light harvesting abilities. Nonetheless, several additional modifications have been shown to enhance their performance, thereby warranting further exploration. This study delves into the fundamental principles of reactive species for MXene-perovskites. Various methods of modification of MXene-perovskite-based photocatalysts, including Schottky junction, Z-scheme and S-scheme are analyzed with regard to their operation, differences, identification techniques and reusability. The assemblance of heterojunctions is demonstrated to enhance photocatalytic activity while also suppressing charge carrier recombination. Furthermore, the separation of photocatalysts through magnetic-based methods is also investigated. Consequently, MXene-perovskite-based photocatalysts are seen as an exciting emerging technology that necessitates further research and development.

A Breakthrough in Photocatalytic Wastewater Treatment: The Incredible Potential of g-C3N4/Titanate Perovskite-Based Nanocomposites

Water pollution has emerged as a major global environmental crisis due to the massive contamination of water resources by the textile dyeing industry, organic waste, and agricultural residue. Since water is fundamental to life, this grave disregard puts lives at risk, making the protection of water resources a serious issue today. Recent research has shown great interest in improving the photocatalytic performance of graphitic carbon nitride (g-C3N4) for wastewater treatment. However, the photocatalytic removal activity of pure g-C3N4 is poor, owing to its minimal surface area, fast recombination of photo-generated electron-hole pairs, and poor light absorption. Recently, titanate perovskites (TNPs) have attracted significant attention in both environmental remediation and energy conversion due to their exceptional structural, optical, physiochemical, electrical, and thermal properties. Accordingly, TNPs can initiate a variety of surface catalytic reactions and are regarded as an emerging category of photocatalysts for sustainability and energy-related industries when exposed to illumination. Therefore, in this review article, we critically discuss the recent developments of extensively developed g-C3N4/TNPs that demonstrate photocatalytic applications for wastewater treatment. The different synthetic approaches and the chemical composition of g-C3N4/TNP composites are presented. Additionally, this review highlights the global research trends related to these materials. Furthermore, this review provides insight into the various photocatalytic mechanisms, including their potential impact and significance. Also, the challenges faced by such materials and their future scope are discussed.

Photoelectrocatalytic Degradation of Methylene Blue on Electrodeposited Bismuth Ferrite Perovskite Films

Electrodeposited bismuth ferrite (BiFeO₃) thin films on fluorine-doped tin oxide (FTO) substrate were employed as photoanodes in the photoelectrocatalytic degradation of methylene blue. The BiFeO₃ thin films electrodeposited for 300 s, 600 s, 1200 s, 1800 s and 3600 s were characterised with XRD, field emission scanning electron microscopy (FESEM) and UV-vis diffuse reflectance spectroscopy. SEM images displayed different morphology at different electrodeposition times which affects the photoelectrocatalytic (PEC) performances. The FESEM cross-sectional area was used to measure the thickness of the film. The optical properties showed that the band gaps of the photoanodes were increasing as the electrodeposition time increased. The photocurrent response obtained showed that all thin film photoanodes responded to visible light and lower charge transfer resistance (from electrochemical impedance spectroscopy studies) was observed with photoanodes electrodeposited at a shorter time compared to those at a longer time. The PEC application of the photoanode for the removal of methylene blue (MB) dye in water showed that the percentage degradation decreased with an increase in electrodeposition time with removal rates of 97.6% and 70% observed in 300 s and 3600 s electrodeposition time, respectively. The extent of mineralisation was measured by total organic carbon and reusability studies were carried out. Control experiments such as adsorption, photolysis, photocatalysis and electrocatalysis processes were also investigated in comparison with PEC. The electrodeposition approach with citric acid exhibited improved electrode stability while mitigating the problem of catalyst leaching or peeling off during the PEC process.

Perovskite-based electrocatalysts for oxygen evolution reaction in alkaline media: A mini review

Water electrolysis is one of the attractive technologies for producing clean and sustainable hydrogen fuels with high purity. Among the various kinds of water electrolysis systems, anion exchange membrane water electrolysis has received much attention by combining the advantages of alkaline water electrolysis and proton exchange membrane water electrolysis. However, the sluggish kinetics of the oxygen evolution reaction, which is based on multiple and complex reaction mechanisms, is regarded as a major obstacle for the development of high-efficiency water electrolysis. Therefore, the development of high-performance oxygen evolution reaction electrocatalysts is a prerequisite for the commercialization and wide application of water electrolysis systems. This mini review highlights the current progress of representative oxygen evolution reaction electrocatalysts that are based on a perovskite structure in alkaline media. We first summarize the research status of various kinds of perovskite-based oxygen evolution reaction electrocatalysts, reaction mechanisms and activity descriptors. Finally, the challenges facing the development of perovskite-based oxygen evolution reaction electrocatalysts and a perspective on their future are discussed.

Perovskite oxide for emerging photo(electro)catalysis in energy and environment

Using solar energy to catalyse photo-driven processes to address the energy crisis and environmental pollution plays a role in the path to a sustainable society. Many oxide-based materials, especially perovskite oxides, have been widely investigated as catalysts for photocatalysis in energy and environment because of the low-cost and earth-abundant and good performance. At this stage, there is a need to present a scientific-based evaluation of the technologies developed so far and identify the most sustainable technologies and the existing limitations and opportunities for their commercialisation. This work comprehensively investigated the outcomes using various scientometric indices on perovskite oxide-based photo(electro)catalysts for water splitting, nitrogen fixation, carbon dioxide conversion, organic pollutant degradation, current trends and advances in the field. According to the results achieved, efforts in both energy and environment based on perovskite oxides have been initiated in the 1990s and accelerated since the 2010s. China and the United States were identified as the most contributing countries. Based on the results achieved in this study, the main milestones and current trends in the development of this field have been identified. The aim of this research is to provide useful guidelines for the further investigation of perovskite oxide-based catalysts for photoelectrocatalysis and photocatalysis both in energy and environment on the applications such as water splitting, nitrogen fixation, carbon dioxide conversion, and wastewater treatment.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Structural, magnetic, and dielectric properties of solution combustion synthesized LaFeO3, LaFe0.9Mn0.1O3, and LaMnO3 perovskites

Nanocrystalline LaFeO3, LaFe0.9Mn0.1O3, and LaMnO3 perovskites have been synthesized by a novel solution combustion route, wherein oxalyl dihydrazide has been used as a fuel. These materials have been characterized by...

Evaluation of the antimicrobial potential of cerium-based perovskite (CeCuO3) synthesized by a hydrothermal method

A hydrothermally synthesized CeCuO3 perovskite nanomaterial has been used as a disinfectant against microorganisms causing urinary tract infections (UTIs).