Lanthanide-Doped Luminescent Nanophosphors via Ionic Liquids

Synthesis Design and Properties of Ca5(BO3)3F: Bi3+/Eu3+: Insight into Luminescence, Temperature, and Pressure Sensing

Nowadays, the utilization of noncontact temperature and pressure sensing is experiencing growing popularity. In this work, Bi3+, Eu3+-doped Ca5(BO3)3F (CBOF) phosphors were synthesized via an ionic liquid-assisted electrospinning approach. The effect of molecular weight of polyvinylpyrrolidone on the morphology of CBOF was investigated, and a comprehensive analysis of its formation mechanism was presented. The luminescence properties of CBOF: Bi3+, Eu3+ were studied systematically. The temperature-dependent emission of CBOF: Bi3+, Eu3+ phosphor was discussed, and it displayed thermal sensitivity, which can be attributed to the distinct thermal response emission behaviors of Bi3+ and Eu3+. The investigation of the pressure-dependent emission behavior of the CBOF: Bi3+ phosphor revealed an anomalous phenomenon: with the increase of pressure, the emission peak showed a trend of first a blue shift and then a red shift. This anomaly was discussed in detail. The phosphor exhibits visual color change (blue to cyan), remarkable pressure sensitivity (4.76 nm/GPa), and a high upper pressure limit (24.2 GPa), indicating its potential use as an optical pressure sensor. Consequently, this study presents an innovative synthetic approach for fabricating CBOF, presenting a bifunctional material with promising prospects in the fields of temperature and pressure sensing.

Green syntheses of silk fibroin/wool keratin-protected AuAg nanoclusters with enhanced fluorescence for multicolor and patterned anti-counterfeiting

Counterfeiting is a serious worldwide issue that threatens human health and economic security. How to apply anti-counterfeiting techniques to textile materials remains a great challenge. Herein, we report bimetallic AuAg nanoclusters (NCs) synthesized by one-step reduction of chloroauric acid (HAuCl4) and silver nitrate (AgNO3) with wool keratin (WK) as reducer and silk fibroin (SF) as stabilizer. The strongest orange-red fluorescence under ultraviolet light as well as the highest zeta potential absolute values of -27.97 mV were simultaneously realized in the optimal proportion Au-AgNCs2 (WK/SF is 3/2), which was further processed to a series of anti-counterfeiting films by blending with SF, silk sericin (SS), and polyvinyl alcohol (PVA). After successfully being numbered into fifteen colors, a dark blue-orange-dark red-dark blue cyclic fluorescent anti-counterfeiting color chart was designed. In addition, a two-Maxwell-unit model was constructed to assist with the microstructure analysis, which found that the formation of hydrogen bonds and the secondary structure transition from α-helices to β-sheets during stretching were responsible for improving the mechanical properties and the two-staged fracture curves of films, respectively. Finally, a patterned and multicolor fluorescence anti-counterfeiting fabric application was demonstrated by combining the color chart and screen printing, indicating the great potential in textile anti-counterfeiting.

Novel Sol-Gel Route to Prepare Eu3+-Doped 80SiO2-20NaGdF4 Oxyfluoride Glass-Ceramic for Photonic Device Applications

Oxyfluoride glass-ceramics (OxGCs) with the molar composition 80SiO₂-20(1.5Eu³⁺: NaGdF₄) were prepared with sol-gel following the "pre-crystallised nanoparticles route" with promising optical results. The preparation of 1.5 mol % Eu³⁺-doped NaGdF₄ nanoparticles, named 1.5Eu³⁺: NaGdF₄, was optimised and characterised using XRD, FTIR and HRTEM. The structural characterisation of 80SiO₂-20(1.5Eu³⁺: NaGdF₄) OxGCs prepared from these nanoparticles' suspension was performed by XRD and FTIR revealing the presence of hexagonal and orthorhombic NaGdF₄ crystalline phases. The optical properties of both nanoparticles' phases and the related OxGCs were studied by measuring the emission and excitation spectra together with the lifetimes of the ⁵D₀ state. The emission spectra obtained by exciting the Eu³⁺-O^2- charge transfer band showed similar features in both cases corresponding the higher emission intensity to the ⁵D₀→⁷F₂ transition that indicates a non-centrosymmetric site for Eu³⁺ ions. Moreover, time-resolved fluorescence line-narrowed emission spectra were performed at a low temperature in OxGCs to obtain information about the site symmetry of Eu³⁺ in this matrix. The results show that this processing method is promising for preparing transparent OxGCs coatings for photonic applications.

Luminescence and stability of Tb doped CaF2 nanoparticles

Luminescence properties of CaF₂:Tb³⁺ nanoparticles were studied in order to investigate the effect of CaF₂ native defects on the photoluminescence dynamics of Tb³⁺ ions. Incorporation of Tb ions into the CaF₂ host was confirmed by X-ray diffraction and X-ray photoelectron spectroscopy. Cross-relaxation energy transfer was observed from the photoluminescence spectra and decay curves upon excitation at 257 nm. However, the unusual long lifetime of the Tb³⁺ ion as well as the decreasing trend of emission lifetime of the ⁵D₃ level suggested the involvement of traps, which were further investigated by using temperature-dependent photoluminescence measurements, thermoluminescence and lifetime measurements at different wavelengths. This work highlights the critical role that the CaF₂ native defects play in the photoluminescence dynamics of Tb³⁺ ions incorporated in a CaF₂ matrix. The sample doped with 10 mol% of Tb³⁺ ions was found to be stable under prolonged 254 nm ultraviolet irradiation.

Lanthanide (Eu, Tb, La)-Doped ZnO Nanoparticles Synthesized Using Whey as an Eco-Friendly Chelating Agent

Strategies for production and use of nanomaterials have rapidly moved towards safety and sustainability. Beyond these requirements, the novel routes must prove to be able to preserve and even improve the performance of the resulting nanomaterials. Increasing demand of high-performance nanomaterials is mostly related to electronic components, solar energy harvesting devices, pharmaceutical industries, biosensors, and photocatalysis. Among nanomaterials, Zinc oxide (ZnO) is of special interest, mainly due to its environmental compatibility and vast myriad of possibilities related to the tuning and the enhancement of ZnO properties. Doping plays a crucial role in this scenario. In this work we report and discuss the properties of undoped ZnO as well as lanthanide (Eu, Tb, and La)-doped ZnO nanoparticles obtained by using whey, a by-product of milk processing, as a chelating agent, without using citrate nor any other chelators. The route showed to be very effective and feasible for the affordable large-scale production of both pristine and doped ZnO nanoparticles in powder form.

Multifunctional Lanthanide-Doped Binary Fluorides and Graphene Oxide Nanocomposites Via a Task-Specific Ionic Liquid

Graphene oxide-based nanocomposites (NCMs) exhibit diverse photonic and biophotonic applications. Innovative nanoengineering using a task-specific ionic liquid (IL), namely, 1-butyl-3-methyl tetrafluoroborate [C₄mim][BF₄], allows one to access a unique class of luminescent nanocomposites formed between lanthanide-doped binary fluorides and graphene oxide (GO). Here the IL is used as a solvent, templating agent, and as a reaction partner for the nanocomposite synthesis, that is, "all three in one". Our study shows that GO controls the size of the NCMs; however, it can tune the luminescence properties too. For example, the excitation spectrum of Ce³⁺ is higher-energy shifted when GO is attached. In addition, magnetic properties of GdF₃:Tb³⁺ nanoparticles (NPs) and GdF₃:Tb³⁺-GO NCMs are also studied at room temperature (300 K) and very low temperature (2 K). High magnetization results for the NPs (e.g., 6.676 emu g^-1 at 300 K and 184.449 emu g^-1 at 2 K in the applied magnetic field from +50 to -50 kOe) and NCMs promises their uses in many photonic and biphotonic applications including magnetic resonance imaging, etc.