Improved Productivity of Neutral Lipids in Chlorella sp. A2 by Minimal Nitrogen Supply

Cohesive phycoremediation of pyrene by freshwater microalgae Selenastrum sp. and biodiesel production and its assessment

In this study, the freshwater microalgae Selenastrum sp. was assessed for the effective degradation of pyrene and simultaneous production of biodiesel from pyrene-tolerant biomass. The growth of algae was determined based on the cell dry weight, cell density, chlorophyll content, and biomass productivity under different pyrene concentrations. Further, lipids from pyrene tolerant culture were converted into biodiesel by acid-catalyzed transesterification, which was characterized for the total fatty acid profile by gas chromatography. Increased pyrene concentration revealed less biomass yield and productivity after 20 days of treatment, indicating potent pyrene biodegradation by Selenastrum sp. Biomass yield was unaffected till the 20 mg/L pyrene. A 95% of pyrene bioremediation was observed at 20 days of culturing. Lipid accumulation of 22.14%, as evident from the estimation of the total lipid content, indicated a marginal increase in corroborating pyrene stress in the culture. Fatty acid methyl esters yield of 63.06% (% per 100 g lipids) was noticed from the pyrene tolerant culture. Moreover, fatty acid profile analysis of biodiesel produced under 10 mg/L and 20 mg/L pyrene condition showed escalated levels of desirable fatty acids in Selenastrum sp., compared to the control. Further, Selenastrum sp. and other freshwater microalgae are catalogued for sustainable development goals attainment by 2030, as per the UNSDG (United Nations Sustainable Development Goals) agenda. Critical applications for the Selenastrum sp. in bioremediation of pyrene, along with biodiesel production, are enumerated for sustainable and renewable energy production and resource management.

Exploring microalgal nutrient-light synergy to enhance CO2 utilization and lipid productivity in sustainable long-term water recycling cultivation

In this work the effects of nutrient availability and light conditions on CO2 utilization and lipid production in Micractinium pusillum KMC8 is reported. The study investigated the ideal nitrogen concentrations for growth and nitrogen utilization in a 15% CO2 environment. Logistic and Gompertz models were employed to analyze the kinetics of KMC8 cell growth. Compared to 17.6 mmol L-1 control nitrogen, which generated 1.6 g L-1 growth, doubling and quadrupling nitrogen concentrations boosted biomass growth by 12.5% and 28.78%. At 8.6 mmol L-1 nitrogen, the growth decreased but lipid productivity increased to 18.62 mg L-1 day-1. At 70.6 mmol L-1 nitrogen, elevated nitrogen levels maintained an alkaline pH above 7 and enhanced CO2 mitigation, achieving 2.27% CO2 utilization efficiency. Nitrogen shows a positive correlation with higher rates of carbon and nitrogen fixation. The investigation extends to find out the influence of phosphorus and light conditions on microalgae. Increasing light intensity incrementally from 150 to 1200 μmol m-2 s-1 with more phosphorus increased biomass productivity by 85% (255 mg L-1 day-1) and lipid productivity by 2.5-fold (84.76 mg L-1 day-1), with 3.3% CO2 utilization efficiency compared to directly using 1200 μmol m-2 s-1. This study suggests a water recycling-fed batch cycle with gradual light feeding, which results in high CO2 fixation (1.1 g L-1 day-1), 7% CO2 utilization, and significant biomass and lipid productivity (577.23 and 150 mg L-1 day-1). This approach promotes lipid synthesis, maintains carbon fixation, and minimizes biomass loss, thus supporting sustainable bioenergy development in a circular bio-economy framework.

Microalgal polyunsaturated fatty acids: Hotspots and production techniques

Algae play a crucial role in the earth’s primary productivity by producing not only oxygen but also a variety of high-value nutrients. One such nutrient is polyunsaturated fatty acids (PUFAs), which are accumulated in many algae and can be consumed by animals through the food chain and eventually by humans. Omega-3 and omega-6 PUFAs are essential nutrients for human and animal health. However, compared with plants and aquatic sourced PUFA, the production of PUFA-rich oil from microalgae is still in the early stages of exploration. This study has collected recent reports on algae-based PUFA production and analyzed related research hotspots and directions, including algae cultivation, lipids extraction, lipids purification, and PUFA enrichment processes. The entire technological process for the extraction, purification and enrichment of PUFA oils from algae is systemically summarized in this review, providing important guidance and technical reference for scientific research and industrialization of algae-based PUFA production.

Maximize microalgal carbon dioxide utilization and lipid productivity by using toxic flue gas compounds as nutrient source

NOx and SOx present in flue gas inhibit microalgal based CO₂ mitigation process. In this work, 13 microalgal strains were screened to evaluate their gradual acclimation capacity to toxic flue gas compounds, by testing their growth capability and photosynthetic ability in dissolved flue gas compounds. Six strains out of them were evaluated for their acclimation to bicarbonate and 15% CO₂ as sole carbon sources. Two strains, Micractinium pusillum KMC8 and Scenedesmus acutus NCIM5584 were found to accumulate nitrite as fixed nitrogen and showed improved growth performance in photobioreactor upon stepwise acclimation to bisulphite/sulphite. Notably, the strain KMC8 showed a high tolerance and rapidly acclimated dissolved flue gas compounds with higher biomass yield (1.32 g L^-1) and neutral lipid accumulation (32%), enhanced CO₂ utilization efficiency (3.07%) and CO₂ fixation rate (136.79 mg L^-1 d^-1) post acclimation. KMC8 sustained its stability in biomass and lipid productivity while simultaneously bio-mitigated CO₂ under semi-continuous mode.

Regulatory mechanisms of lipid biosynthesis in microalgae

Microalgal lipids are highly promising feedstocks for biofuel production. Microalgal lipids, especially triacylglycerol, and practical applications of these compounds have received increasing attention in recent years. For the commercial use of microalgal lipids to be feasible, many fundamental biological questions must be addressed based on detailed studies of algal biology, including how lipid biosynthesis occurs and is regulated. Here, we review the current understanding of microalgal lipid biosynthesis, with a focus on the underlying regulatory mechanisms. We also present possible solutions for overcoming various obstacles to understanding the basic biology of microalgal lipid biosynthesis and the practical application of microalgae-based lipids. This review will provide a theoretical reference for both algal researchers and decision makers regarding the future directions of microalgal research, particularly pertaining to microalgal-based lipid biosynthesis.

A novel nanoemulsion-based microalgal growth medium for enhanced biomass production

BACKGROUND

Microalgae are well-established feedstocks for applications ranging from biofuels to valuable pigments and therapeutic proteins. However, the low biomass productivity using commercially available growth mediums is a roadblock for its mass production. This work describes a strategy to boost algal biomass productivity by using an effective CO₂ supplement.

RESULTS

In the present study, a novel nanoemulsion-based media has been tested for the growth of freshwater microalgae strain Chlorella pyrenoidosa. Two different nanoemulsion-based media were developed using 1% silicone oil nanoemulsion (1% SE) and 1% paraffin oil nanoemulsion (1% PE) supplemented in Blue-green 11 media (BG11). After 12 days of cultivation, biomass yield was found highest in 1% PE followed by 1% SE and control, i.e., 3.20, 2.75, and 1.03 g L^-1, respectively. The chlorophyll-a synthesis was improved by 76% in 1% SE and 53% in 1% PE compared with control. The respective microalgal cell numbers for 1% PE, 1% SE and control measured using the cell counter were 3.00 × 10⁶, 2.40 × 10⁶, and 1.34 × 10⁶ cells mL^-1. The effective CO₂ absorption tendency of the emulsion was highlighted as the key mechanism for enhanced algal growth and biomass production. On the biochemical characterization of the produced biomass, it was found that the nanoemulsion-cultivated C. pyrenoidosa had increased lipid (1% PE = 26.80%, 1% SE = 23.60%) and carbohydrates (1% PE = 17.20%, 1% SE = 18.90%) content compared to the control (lipid = 18.05%, carbohydrates = 13.60%).

CONCLUSIONS

This study describes a novel nanoemulsion which potentially acts as an effective CO₂ supplement for microalgal growth media thereby increasing the growth of microalgal cells. Further, nanoemulsion-cultivated microalgal biomass depicts an increase in lipid and carbohydrate content. The approach provides high microalgal biomass productivity without altering morphological characteristics like cell shape and size as revealed by field emission scanning electron microscope (FESEM) images.

The Use of Urea and Kelp Waste Extract is A Promising Strategy for Maximizing the Biomass Productivity and Lipid Content in Chlorella sorokiniana

The decline in fossil fuel reserves has forced researchers to seek out alternatives to fossil fuels. Microalgae are considered to be a promising feedstock for sustainable biofuel production. Previous studies have shown that urea is an important nitrogen source for cell growth and the lipid production of microalgae. The present study investigated the effect of different concentrations of urea combined with kelp waste extract on the biomass and lipid content of Chlorella sorokiniana. The results revealed that the highest cell density, 20.36 × 107 cells-1, and maximal dry biomass, 1.70 g/L, were achieved in the presence of 0.5 g/L of urea combined with 8% kelp waste extract. Similarly, the maximum chlorophyll a, b and beta carotenoid were 10.36 mg/L, 7.05, and 3.01 mg/L, respectively. The highest quantity of carbohydrate content, 290.51 µg/mL, was achieved in the presence of 0.2 g/L of urea and 8% kelp waste extract. The highest fluorescence intensity, 40.05 × 107 cells-1, and maximum total lipid content (30%) were achieved in the presence of 0.1 g/L of urea and 8% kelp waste extract. The current study suggests that the combination of urea and kelp waste extract is the best strategy to enhance the biomass and lipid content in Chlorella sorokiniana.

Valorization of Spent Escherichia coli Media Using Green Microalgae Chlamydomonas reinhardtii and Feedstock Production

The coupling of Chlamydomonas reinhardtii biomass production for nutrients removal of Escherichia coli anaerobic broth (EAB) is thought to be an economically feasible option for the cultivation of microalgae. The feasibility of growing microalgae in using EAB high in nutrients for the production of more biomass was examined. EAB comprised of nutrient-abundant effluents, which can be used to produce microalgae biomass and remove environment pollutant simultaneously. In this study, C. reinhardtii 21gr (cc1690) was cultivated in different diluted E. coli anaerobic broth supplemented with trace elements under mixotrophic and heterotrophic conditions. The results showed that C. reinhardtii grown in 1×, 1/2×, 1/5× and 1/10×E. coli anaerobic broth under mixotrophic conditions exhibited specific growth rates of 2.71, 2.68, 1.45, and 1.13 day^-1, and biomass production of 201.9, 184.2, 175.5, and 163.8 mg L^-1, respectively. Under heterotrophic conditions, the specific growth rates were 1.80, 1.86, 1.75, and 1.02 day^-1, and biomass production were 45.6, 29.4, 15.8, and 12.1 mg L^-1, respectively. The removal efficiency of chemical oxygen demand, total-nitrogen and total-phosphorus from 1×E. coli anaerobic broth was 21.51, 22.41, and 15.53%. Moreover, the dry biomass had relatively high carbohydrate (44.3%) and lipid content (18.7%). Therefore, this study provides an environmentally sustainable as well economical method for biomass production in promising model microalgae and subsequently paves the way for industrial use.