Fermentation pH Modulates the Size Distributions and Functional Properties of Gluconobacter albidus TMW 2.1191 Levan

Production, effects, and applications of fructans with various molecular weights

Fructan, a widespread functional polysaccharide, has been used in the food, pharmaceutical, cosmetic, and material production fields because of its versatile physicochemical properties and biological activities. Inulin from plants and levan from microorganisms are two of the most extensively studied fructans. Fructans from different plants or microorganisms have inconsistent molecular weights, and the molecular weight of fructan affects its properties, functions, and applications. Recently, increasing attention has been paid to the production and application of fructans having various molecular weights, and biotechnological processes have been explored to produce tailor-made fructans from sucrose. This review encompasses the introduction of extraction, enzymatic transformation, and fermentation production processes for fructans with diverse molecular weights. Notably, it highlights the enzymes involved in fructan biosynthesis and underscores their physiological effects, with a special emphasis on their prebiotic properties. Moreover, the applications of fructans with varying molecular weights are also emphasized.

Levan Production by Suhomyces kilbournensis Using Sugarcane Molasses as a Carbon Source in Submerged Fermentation

The valorization of byproducts from the sugarcane industry represents a potential alternative method with a low energy cost for the production of metabolites that are of commercial and industrial interest. The production of exopolysaccharides (EPSs) was carried out using the yeast Suhomyces kilbournensis isolated from agro-industrial sugarcane, and the products and byproducts of this agro-industrial sugarcane were used as carbon sources for their recovery. The effect of pH, temperature, and carbon and nitrogen sources and their concentration in EPS production by submerged fermentation (SmF) was studied in 170 mL glass containers of uniform geometry at 30 °C with an initial pH of 6.5. The resulting EPSs were characterized with Fourier-transform infrared spectroscopy (FT-IR). The results showed that the highest EPS production yields were 4.26 and 44.33 g/L after 6 h of fermentation using sucrose and molasses as carbon sources, respectively. Finally, an FT-IR analysis of the EPSs produced by S. kilbournensis corresponded to levan, corroborating its origin. It is important to mention that this is the first work that reports the production of levan using this yeast. This is relevant because, currently, most studies are focused on the use of recombinant and genetically modified microorganisms; in this scenario, Suhomyces kilbournensis is a native yeast isolated from the sugar production process, giving it a great advantage in the incorporation of carbon sources into their metabolic processes in order to produce levan sucrose, which uses fructose to polymerize levan.

Unraveling the role of flexible coil near calcium binding site of levansucrase on thermostability and product profile via proline substitution and molecular dynamics simulations

Due to its bioactivity and versatile applications, levan has appeared as a promising biomaterial. Levansucrase is responsible for the conversion of sucrose into levan. With the goal of enhancing levan production, the strategy for enhancing the stability of levansucrase is being intensively studied. To make proteins more stable under high temperatures, proline, the most rigid residue, can be introduced into previously flexible regions. Herein, G249, D250, N251, and H252 on the flexible coil close to the calcium binding site of Bacillus licheniformis levansucrase were replaced with proline. Mutations at G249P greatly enhance both the enzyme's thermodynamic and kinetic stability, while those at H252P improve solely the enzyme's kinetic stability. GPC analysis revealed that G249P synthesize more levan, but H252P generate primarily oligosaccharides. Molecular dynamics simulations (MD) and MM/GBSA analysis revealed that G249P mutation increased not only the stability of levansucrase, but also affinity toward fructan.

Similarities and differences of nano-sized levan synthesized by Bacillus haynesii at low and high temperatures: Characterization and bioactivity

Levan is a biopolymer with many different uses. Temperature is an important parameter in biopolymer synthesis. Herein, levan production was carried out from Bacillus haynesii, a thermophilic microorganism, in the temperature range of 4 °C-95 °C. The highest levan production was measured as 10.9 g/L at 37 °C. The synthesized samples were characterized by FTIR and NMR analysis. The particle size of the levan samples varied between 153 and 824.4 nm at different temperatures. In levan samples produced at high temperatures, the water absorption capacity is higher in accordance with the particle size. Irregularities were observed in the surface pores at temperatures of 60 °C and above. The highest emulsion capacity of 83.4 % was measured in the sample synthesized at 4 °C. The antioxidant activity of all levan samples synthesized at different temperatures was measured as 84 % on average. All synthesized levan samples showed antibacterial effect on pathogenic bacteria. In addition, levan synthesized at 45 °C showed the highest antimicrobial effect on E. coli ATCC 35218 with an inhibition zone of 21.3 ± 1.82 mm. Antimicrobial activity against yeast sample C. albicans, was measured only in levan samples synthesized at 80 °C, 90 °C, 95 °C temperatures. Levan synthesized from Bacillus haynesii at low and high temperatures showed differences in characterization and bioactivity.

Elaboration of Nanostructured Levan-Based Colloid System as a Biological Alternative with Antimicrobial Activity for Applications in the Management of Pathogenic Microorganisms

Considering the documented health benefits of bacterial exopolysaccharides (EPSs), specifically of bacterial levan (BL), including its intrinsic antimicrobial activity against certain pathogenic species, the current study concentrated on the development of active pharmaceutical ingredients (APIs) in the form of colloid systems (CoSs) containing silver nanoparticles (AgNPs) employing in-house biosynthesized BL as a reducing and capping agent. The established protocol of fermentation conditions implicating two species of lactic acid bacteria (LAB), i.e., Streptococcus salivarius K12 and Leuconostoc mesenteroides DSM 20343, ensured a yield of up to 25.7 and 13.7 g L-1 of BL within 72 h, respectively. An analytical approach accomplished by Fourier-transform infrared (FT-IR) spectroscopy allowed for the verification of structural features attributed to biosynthesized BL. Furthermore, scanning electron microscopy (SEM) revealed the crystalline morphology of biosynthesized BL with a smooth and glossy surface and highly porous structure. Molecular weight (Mw) estimated by multi-detector size-exclusion chromatography (SEC) indicated that BL biosynthesized using S. salivarius K12 has an impressively high Mw, corresponding to 15.435 × 104 kilodaltons (kDa). In turn, BL isolated from L. mesenteroides DSM 20343 was found to have an Mw of only 26.6 kDa. Polydispersity index estimation (PD = Mw/Mn) of produced BL displayed a monodispersed molecule isolated from S. salivarius K12, corresponding to 1.08, while this was 2.17 for L. mesenteroides DSM 20343 isolate. The presence of fructose as the main backbone and, to a lesser extent, glucose and galactose as side chain molecules in EPS hydrolysates was supported by HPLC-RID detection. In producing CoS-BL@AgNPs within green biosynthesis, the presence of nanostructured objects with a size distribution from 12.67 ± 5.56 nm to 46.97 ± 20.23 was confirmed by SEM and energy-dispersive X-ray spectroscopy (EDX). The prominent inhibitory potency of elaborated CoS-BL@AgNPs against both reference test cultures, i.e., Pseudomonas aeruginosa, Escherichia coli, Enterobacter aerogenes, and Staphylococcus aureus and those of clinical origin with multi-drug resistance (MDR), was confirmed by disc and well diffusion tests and supported by the values of the minimum inhibitory and bactericidal concentrations. CoS-BL@AgNPs can be treated as APIs suitable for designing new antimicrobial agents and modifying therapies in controlling MDR pathogens.

Glycoside hydrolase family 32 enzymes from Bombella spp. catalyze the formation of high-molecular weight fructans from sucrose

AIMS

Acetic acid bacteria of the genus Bombella have not been reported to produce exopolysaccharides (EPS). In this study, the formation of fructans by B. apis TMW 2.1884 and B. mellum TMW 2.1889 was investigated.

METHODS AND RESULTS

Out of eight strains from four different Bombella species, only B. apis TMW 2.1884 and B. mellum TMW 2.1889 showed EPS formation with 50 g l-1 sucrose as substrate. Both EPS were identified as high-molecular weight (HMW) polymers (106-107 Da) by asymmetric flow field-flow fractionation coupled to multi angle laser light scattering and UV detecors (AF4-MALLS/UV) and high performance size exclusion chromatography coupled to MALLS and refractive index detectors (HPSEC-MALLS/RI) analyses. Monosaccharide analysis via trifluoroacetic acid hydrolysis showed that both EPS are fructans. Determination of glycosidic linkages by methylation analysis revealed mainly 2,6-linked fructofuranose (Fruf) units with additional 2,1-linked Fruf units (10%) and 2,1,6-Fruf branched units (7%). No glycoside hydrolase (GH) 68 family genes that are typically associated with the formation of HMW fructans in bacteria could be identified in the genomes. Through heterologous expression in Escherichia coli Top10, an enzyme of the GH32 family could be assigned to the catalysis of fructan formation. The identified fructosyltransferases could be clearly differentiated phylogenetically and structurally from other previously described bacterial fructosyltransferases.

CONCLUSIONS

The formation of HMW fructans by individual strains of the genus Bombella is catalyzed by enzymes of the GH32 family. Analysis of the fructans revealed an atypical structure consisting of 2,6-linked Fruf units as well as 2,1-linked Fruf units and 2,1,6-Fruf units.

Deep eutectic solvent assisted recovery of high molecular weight levan from an isolated Neobacillus pocheonensis BPSCM4

The present study demonstrates the usage of deep eutectic solvent to recover microbial levan from the clarified fermented broth. The classic ethanol precipitation method for levan recovery is expensive because ethanol can be utilized as a biofuel. Production of ethanol consumes more energy and is not easily recycled. As a result, the current work concentrates on using environmentally friendly solvents for levan recovery. Deep Eutectic Solvents (DES) are greener and can replace ethanol from the microbial polysaccharides precipitation. Thus the proposed approach is environment friendly, technically feasible, reliable and economically viable. The levan was produced from a microbial isolate of aged sugarcane molasses, recovered using traditional ethanol and proposed DES (Choline Chloride and Ethylene Glycol) assisted precipitation. The levan-producing strain was characterized and identified as Neobacillus pocheonensis BPSCM4. The DES-precipitated levan has a high molecular weight of levan, 1.54 × 106 KDa, compared with the ethanol-precipitated levan, 4.246 KDa. The high molecular weight of DES-precipitated levan is due to the low viscosity and hydrogen interaction of ChCl:EG with the levan present in the fermented broth. Further, the optimization enhanced the levan yield to 32.56 g/L when the sucrose concentration was 250 g/L.

New perspectives into Gluconobacter-catalysed biotransformations

Different from other aerobic microorganisms that oxidise carbon sources to water and carbon dioxide, Gluconobacter catalyses the incomplete oxidation of various substrates with regio- and stereoselectivity. This ability, as well as its capacity to release the resulting products into the reaction media, place Gluconobacter as a privileged member of a non-model microorganism class that may boost industrial biotechnology. Knowledge of new technologies applied to Gluconobacter has been piling up in recent years. Advancements in its genetic modification, application of immobilisation tools and careful designs of the transformations, have improved productivities and stabilities of Gluconobacter strains or enabled new bioconversions for the production of valuable marketable chemicals. In this work, the latest advancements applied to Gluconobacter-catalysed biotransformations are summarised with a special focus on recent available tools to improve them. From genetic and metabolic engineering to bioreactor design, the most recent works on the topic are analysed in depth to provide a comprehensive resource not only for scientists and technologists working on/with Gluconobacter, but for the general biotechnologist.

Influence of Levan on the Thermally Induced Gel Formation of β-Lactoglobulin

In this study, the influence of levan on the phase behavior and the thermally induced gelation of the mixed β-lactoglobulin—levan gels as a function of polymer content, molecular weight and ionic strength was characterized. For this purpose, rheology was used to study the mechanical properties of the gels and the water binding of the network structure was investigated by time domain nuclear magnetic resonance. Phase behavior and network type were analyzed by optical observation and electron microscopy. Levan enhanced the aggregation and gel formation of β-lg due to segregative forces between the polymer species. Segregation was caused by the excluded volume effect and was more pronounced at lower ionic strength, higher levan contents and higher levan molecular weights. The presence of levan increased the water binding of the gel networks. However, this effect decreased with increasing levan content. At high ionic strength and high levan content, phase separated gels were formed. While segregative forces enhanced network formation, and therefore, increased the gel strength of mixed gels at low ionic strength, levan had also antagonistic effects on the network formation at high ionic strength and high polymer contents.

Bacterial Extracellular Polymers: A Review

Prokaryotic microbial cells especially bacteria are highly emphases for their exopolysaccharides (EPS) production. EPS are the higher molecular weight natural extracellular compounds observe at the surface of the bacterial cells. Nowadays bacterial EPS represent rapidly emerging as new and industrially important biomaterials because it having tremendous physical and chemical properties with novel functionality. Due to its industrial demand as well as research studies the different extraction processes have been discovered to remove the EPS from the microbial biofilm. The novelties of EPS are also based on the microbial habitat conditions such as higher temperature, lower temperature, acidic, alkaliphilic, saline, etc. Based on its chemical structure they can be homopolysaccharide or heteropolysaccharide. EPSs have a wide range of applications in various industries such as food, textile, pharmaceutical, heavy metal recovery, agriculture, etc. So, this review focus on the understanding of the structure, different extraction processes, biosynthesis and genetic engineering of EPS as well as their desirable biotechnological applications.

Biomedical Applications of Bacterial Exopolysaccharides: A Review

Bacterial exopolysaccharides (EPSs) are an essential group of compounds secreted by bacteria. These versatile EPSs are utilized individually or in combination with different materials for a broad range of biomedical field functions. The various applications can be explained by the vast number of derivatives with useful properties that can be controlled. This review offers insight on the current research trend of nine commonly used EPSs, their biosynthesis pathways, their characteristics, and the biomedical applications of these relevant bioproducts.

Analysis of Structural and Functional Differences of Glucans Produced by the Natively Released Dextransucrase of Liquorilactobacillus hordei TMW 1.1822

The properties of the glucopolymer dextran are versatile and linked to its molecular size, structure, branching, and secondary structure. However, suited strategies to control and exploit the variable structures of dextrans are scarce. The aim of this study was to delineate structural and functional differences of dextrans, which were produced in buffers at different conditions using the native dextransucrase released by Liquorilactobacillus (L.) hordei TMW 1.1822. Rheological measurements revealed that dextran produced at pH 4.0 (MW = 1.1 * 108 Da) exhibited the properties of a viscoelastic fluid up to concentrations of 10% (w/v). By contrast, dextran produced at pH 5.5 (MW = 1.86 * 108 Da) was gel-forming already at 7.5% (w/v). As both dextrans exhibited comparable molecular structures, the molecular weight primarily influenced their rheological properties. The addition of maltose to the production assays caused the formation of the trisaccharide panose instead of dextran. Moreover, pre-cultures of L. hordei TMW 1.1822 grown without sucrose were substantial for recovery of higher dextran yields, since the cells stored the constitutively expressed dextransucrase intracellularly, until sucrose became available. These findings can be exploited for the controlled recovery of functionally diverse dextrans and oligosaccharides by the use of one dextransucrase type.

Insights into extracellular dextran formation by Liquorilactobacillus nagelii TMW 1.1827 using secretomes obtained in the presence or absence of sucrose

Dextrans are α-(1,6)-linked glucose polymers, which are exclusively produced by lactic acid bacteria from sucrose via extracellular dextransucrases. Previous studies suggested that the environmental pH and the presence of sucrose can impact the release and activity of these enzymes. To get deeper insight into this phenomenon, the dextransucrase expressed by water kefir borne Liquorilactobacillus (L.) nagelii TMW 1.1827 (formerly Lactobacillus nagelii) was recovered in supernatants of buffered cell suspensions that had been incubated with or without sucrose and at different pH. The obtained secretomes were used to time-dependently produce and recover dextrans, whose molecular and macromolecular structures were determined by methylation analysis and AF4-MALS-UV measurements, respectively. The initial pH of the buffered cell suspensions had solely a minor influence on the released dextransucrase activity. When sucrose was present during incubation, the secretomes contained significantly higher dextransucrase activities, although the amounts of totally released proteins obtained with or without sucrose were comparable. However, the dextransucrase appeared to be released in lower amounts into the environment if sucrose was not present. The amount of isolable dextran increased up to 24 h of production, although the total sucrose was consumed within the first 10 min of incubation. Furthermore, the sucrose isomer leucrose had been formed after 10 min, while its concentrations decreased over time and the portions of longer isomaltooligosaccharides (IMOs) increased. This indicated that leucrose can be used by L. nagelii TMW 1.1827 to produce more elongated and branched dextran molecules from presynthesized IMOs, while disproportionation reactions on short IMOs may appear additionally. This leads to increasing amounts of high molecular weight dextran in a state of sucrose depletion. These findings reveal new insights into the pH- and sucrose-dependent kinetics of extracellular dextran formation and may be useful for optimization of fermentative and enzymatic dextran production processes.

Applications of asymmetrical flow field-flow fractionation for separation and characterization of polysaccharides: A review

Polysaccharides are the most abundant natural biopolymers on the earth and are widely used in food, medicine, materials, cosmetics, and other fields. The physicochemical properties of polysaccharides such as particle size and molecular weight often affect their practical applications. In recent years, asymmetrical flow field-flow fractionation (AF4) has been widely used in the separation and characterization of polysaccharides because it has no stationary phases or packing materials, which reduces the risk of shear degradation of polysaccharides. In this review, the principle of AF4 was introduced briefly. The operation conditions of AF4 for the analysis of polysaccharides were discussed. The applications of AF4 for the separation and characterization of polysaccharides from different sources (plants, animals, and microorganisms) over the last decade were critically reviewed.

Insights into the pH-dependent, extracellular sucrose utilization and concomitant levan formation by Gluconobacter albidus TMW 2.1191

Many bacteria and archaea produce the polydisperse fructose polymer levan from sucrose upon biofilm formation via extracellular levansucrases (EC 2.4.1.10). We have investigated levansucrase-release and -activities as well as molecular size of the levan formed by the acetic acid bacterium Gluconobacter albidus TMW 2.1191 at varying environmental pH conditions to obtain insight in the ecological role of its constitutively expressed levansucrase and the produced levan. A buffer system was established enabling the recovery of levansucrase-containing supernatants from preincubated cell suspensions at pH 4.3-pH 5.7. The enzyme solutions were used to produce levans at different pH values and sucrose concentrations. Finally, the amounts and size distributions of the produced levans as well as the corresponding levansucrase activities were determined and correlated with each other. The data revealed that the levansucrase was released into the environment independently of its substrate sucrose, and that more levansucrase was released at pH ≥ 5.0. The glucose release and formation of high molecular weight levans (> 3.5 kDa) from 0.1 M initial sucrose was comparable between pH ~ 4.3-5.7 using equal amounts of released levansucrase. Hence, this type of levansucrase appears to be structurally adapted to changes in the extracellular pH and to exhibit a similar total activity over a wide acidic pH range, while it produced higher amounts of larger levan molecules at higher production pH and sucrose concentrations. These findings indicate the physiological adaptation of G. albidus TMW 2.1191 to efficient colonisation of sucrose-rich habitats via released levansucrases despite changing extracellular pH conditions in course of acid formation.

Production and Physicochemical Properties of Food-Grade High-Molecular-Weight Lactobacillus Inulin

Inulin has been widely applied in food, pharmaceuticals, and many other fields because of its versatile physicochemical properties and physiological functions. Previous research showed that inulosucrase from microorganisms could produce higher-molecular-weight inulin than vegetal inulin. Herein, a food-grade recombinant Bacillus subtilis expression system was constructed to produce inulosucrase from Lactobacillus gasseri DSM 20604 without antibiotic resistance genes. The produced inulosucrase was used to biosynthesize inulin with an average molecular weight of 5.8 × 10⁶ Da. The physicochemical properties of the produced Lactobacillus inulin were evaluated including microstructure, thermal characteristics, crystallinity, rheological behaviors, and storage stability. By comparing with vegetal inulin and other polymers, the biosynthesized microbial inulin showed some superior properties, such as better gel-forming capability and storage stability in aqueous solution than vegetal inulin. These results opened up possibilities for further investigations aimed at developing microbial inulin in the food industry.

Size-Dependent Variability in Flow and Viscoelastic Behavior of Levan Produced by Gluconobacter albidus TMW 2.1191

Levan is a fructan-type exopolysaccharide which is produced by many microbes from sucrose via extracellular levansucrases. The hydrocolloid properties of levan depend on its molecular weight, while it is unknown why and to what extent levan is functionally diverse depending on its size. The aim of our study was to gain deeper insight into the size-dependent functional variability of levan. For this purpose, levans of different sizes were produced using the water kefir isolate Gluconobacter albidus TMW 2.1191 and subsequently rheologically characterized. Three levan types could be identified, which are similarly branched, but differ significantly in their molecular size and rheological properties. The smallest levan (<107 Da), produced without adjustment of the pH, exhibited Newton-like flow behavior up to a specific concentration of 25% (w/v). By contrast, larger levans (>108 Da) produced at pH ≥ 4.5 were shear-thinning, and the levan produced at pH 5.0 showed a gel-like behavior at 5% (w/v). A third (intermediate) levan variant was obtained through production in buffers at pH 4.0 and exhibited the properties of a viscoelastic fluid up to concentrations of 15% (w/v). Our study reveals that the rheological properties of levan are determined by its size and polydispersity, rather than by the amount of levan used or the structural composition.

A systematic approach to study the pH-dependent release, productivity and product specificity of dextransucrases

Background

Dextransucrases are extracellular enzymes, which catalyze the formation of α-1→6-linked glucose polymers from sucrose. These enzymes are exclusively expressed by lactic acid bacteria, which commonly acidify the extracellular environment due to their physiology. Dextransucrases are thus confronted with steadily changing reaction conditions in regards to the environmental pH, which can further affect the amount of released dextransucrases. In this work, we studied the effect of the environmental pH on the release, the productivity and the product specificity of the dextransucrase expressed by Lactobacillus (L.) hordei TMW 1.1822. Dextransucrases were recovered as crude extracts at pH 3.5–pH 6.5 and then again used to produce dextrans at these pH values. The respectively produced dextran amounts and sizes were determined and the obtained results finally systematically correlated.

Results

Maximum dextran amounts were produced at pH 4.0 and pH 4.5, while the productivity of the dextransucrases significantly decreased at pH 3.5 and pH 6.5. The distribution of dextran amounts produced at different pH most likely reflects the pH dependent activity of the dextransucrases released by L. hordei, since different transglycosylation rates were determined at different pH using the same dextransucrase amounts. Moreover, similar hydrolysis activities were detected at all tested conditions despite significant losses of transglycosylation activities indicating initial hydrolysis prior to transglycosylation reactions. The molar masses and rms radii of dextrans increased up to pH 5.5 independently of the stability of the enzyme. The gelling properties of dextrans produced at pH 4.0 and pH 5.5 were different.

Conclusions

The presented methodological approach allows the controlled production of dextrans with varying properties and could be transferred and adapted to other microbes for systematic studies on the release and functionality of native sucrases or other extracellular enzymes.

In situ production and characterization of cloud forming dextrans in fruit-juices

Turbidity in beverages is typically achieved by addition of emulsion based cloud systems. Their intrinsic instability necessitates the widespread use of technological measures and use of food additives to prevent emulsion decay. In this work, we explored the possibility to establish a new generation of natural, stable clouding systems based on bacterial dextrans. Lactobacillus hordei TMW 1.1907 originating from water kefir was used to produce dextrans in sucrose supplemented apple or grape juices. By varying the fermentation conditions, two distinct types of dextran molecules could be produced at yields ranging from 2.5 to 8.5 g/L. The dextran-containing fermentates showed an unchanged turbidity after pasteurization at acidic pH and subsequent storage for three months. No sedimentation of particles occurred upon storage. Neutralization of the acidic fruit juices to pH 7 prior to fermentation significantly increased the dextran yields. The molecular weight, rms radii and turbidity of dextrans produced at 20 °C were higher than those produced at 30 °C. Characterization of the isolated dextrans by asymmetric flow field-flow fractionation coupled to multi-angle laser light scattering revealed a random-coil like structure and rms radii ranging from 66.0 to 87.4 nm. The averaged molar masses of the cloud forming dextrans were in the approximate range of 103.1 to 141.6 MDa. In conclusion, our results demonstrate the possibility to ferment fruit juices for in situ production of dextrans exhibiting novel techno-functional properties beyond gelling and thickening.

Scaling up of levan yield in Bacillus subtilis M and cytotoxicity study on levan and its derivatives

This study focused on kinetics of levan yield by Bacillus subtilis M, in a 150 L stirred tank bioreactor under controlled pH conditions. The optimized production medium was composed of (g/L): commercial sucrose 100.0, yeast extract 2.0, K₂HPO₄ 3.0 and MgSO₄⋅7H₂O 0.2; an increase in both carbohydrates consumption and cell growth depended on increasing the size of the stirred tank bioreactor from 16 L to 150 L. The highest levansucrase production (63.4 U/mL) and levan yield of 47 g/L was obtained after 24 h. Also, the specific levan yield (Y_p/x) which reflects the cell productivity increased with the size increase of the stirred tank bioreactor and reached its maximum value of about 29.4 g/g cells. These results suggested that B. subtilis M could play an important role in levan yield on a large scale in the future. Chemical modifications of B. subtilis M crude levan (CL) into sulfated (SL), phosphorylated (PL), and carboxymethylated levans (CML) were done. The difference in CL structure and its derivatives was detected by FT-IR transmission spectrum. The cytotoxicity of CL and its derivatives were evaluated by HepGII, Mcf-7 and CaCo-2. In general most tested levans forms had no significant cytotoxicity effect. In fact, the carboxymethylated and phosphrylated forms had a lower anti-cancer effect than CL. On the other hand, SL had the highest cytotoxicity showing SL had a significant anti-cancer effect. The results of cytotoxicity and cell viability were statistically analyzed using three-way ANOVA.

Lactobacillus hordei dextrans induce Saccharomyces cerevisiae aggregation and network formation on hydrophilic surfaces

Water kefir granules are supposed to mainly consist of dextrans produced by Lactobacillus (L.) hilgardii. Still, other microorganisms such as L. hordei, L. nagelii, Leuconostoc (Lc.) citreum and Saccharomyces (S.) cerevisiae are commonly isolated from water kefir granules, while their contribution to the granule formation remains unknown. We studied putative functions of these microbes in granule formation, upon development of a simplified model system containing hydrophilic object slides, which mimics the hydrophilic surface of a growing kefir granule. We found that all tested lactic acid bacteria produced glucans, while solely those isolated from the four different L. hordei strains induced yeast aggregation on the hydrophilic slides. Therefore, structural differences between these glucans were investigated with respect to their size distributions and their linkage types. Beyond the finding that all glucans were identified as dextrans, those of the four L. hordei strains were highly similar among each other regarding portions of linkage types and size distributions. Thus, our study suggests the specific size and structural organization of the dextran produced by L. hordei as the main cause for inducing S. cerevisiae aggregation and network formation on hydrophilic surfaces and thus as crucial initiation of the stepwise water kefir granule growth.

Recent insights in microbial exopolysaccharide biosynthesis and engineering strategies

The distinct biosynthesis pathways for microbial exopolysaccharide production provide different engineering strategies to tailor the chemical structures of the final polymers. This review focuses on the latest insights in the various pathways and identifies bottlenecks as well as promising targets for tailoring microbial polysaccharide production. The main engineering strategies includes the combinatorial assembly of glycosyltransferases and engineering of the Wzx and Wzy proteins for flipping of repeating units as well as polymerization. In the case of synthase based polysaccharides, the use of epimerases or engineering approaches of the synthase itself as well as overexpression of c-di-GMP levels is identified as one of the most promising strategies. For sucrase-based biosynthesis, the in vitro production by engineered sucrase enzymes or adjusted production conditions is shown as a very promising method.