Interrogating the Transient Selectivity of Bacterial Chemotaxis-Driven Affinity and Accumulation of Carbonaceous Substances via Raman Microspectroscopy

The methods for improving the biodegradability of oily sludge: a critical review

Biological degradation method, as an environmentally friendly, low-carbon, and clean pollution treatment technology, is widely used for the harmless disposal of oily sludge. The biodegradability of oily sludge with stable emulsification system, high oil, and water content is poor. Therefore, it is necessary to pre-treat the oily sludge to improve its biodegradability, including recover the petroleum resources and remove heavy metals and bio-toxic organic matters. This review systematically summarizes five oily sludge treatment methods and their influences on sludge biodegradability, including pyrolysis, chemical hot washing, solvent extraction, chemical oxidation, and hydrothermal. Pyrolysis at temperatures above 750 °C produces high molecular weight polycyclic aromatic hydrocarbons, chemical hot washing and chemical oxidation would cause secondary pollution, solvent extraction method could not be applied due to the high cost and high toxicity of the extractant, and the oil removal of hydrothermal method is inefficient. Additionally, the principles, advantages, and disadvantages of those treatments and the factors affecting microbial degradation were analyzed, which provide the development direction of pretreatment technology to improve the biodegradability of oily sludge.

Characterizing the impact of species/strain-specific Lactiplantibacillus plantarum with community assembly and metabolic regulation in pickled Suancai

To investigate the colonization and impact of the specific Lactiplantibacillus plantarum strains, four isolated strains were applied in pickled Suancai which is a traditional pickled mustard (Brassica juncea). Results showed that strain-8 with the highest lactic acid bacteria (LAB) counts and acetic acid (p < 0.05). There were 11.42 % ∼ 32.35 % differential volatile compounds detected, although nitriles, esters, and acids were predominant. L. plantarum disturbed the microbial community, in which the microbial composition of strain-11 was most similar to the naturally fermented sample. Amino acids, carbohydrate metabolism, and metabolism of cofactors and vitamins were the main functional classes because of the similar dominant microbes (Lactiplantibacillus and Levilactobacillus). The functional units were separated based on NMDS analysis, in which bacterial chemotaxis, amino acid-related units, biotin metabolism, fatty acid biosynthesis, and citrate cycle were significantly different calculated by metagenomeSeq and Benjamin-Hochberg methods (p < 0.05). The contents of most flavor compounds were consistent with their corresponding enzymes. In particular, glucosinolates metabolites were different and significantly related to the myrosinase and metabolic preference of LAB. Therefore, this study revealed the impact mechanism of the specific L. plantarum strains and provided a perspective for developing microbial resources to improve the flavor diversity of fermented vegetables.

Effects of Different Heat Treatment Methods on Organic Pollutants and Heavy Metal Content in Oil Sludge Waste and Ecotoxicological Evaluation

The discharge of large amounts of oily sludge heat treatment residues constitutes a severe threat to the environment. However, little is known about the toxicity of these heat-treated residues. Current research has mainly focused on the toxic effects of single heavy metals or single hydrocarbons on plants, whereas the phytotoxic effects of hydrocarbon–metal mixtures have remained largely unexplored. In this study, pot experiments were conducted to evaluate the effects of different proportions of heat treatment residues (pyrolysis, heat-washing, and high-temperature oxidation residues) from three kinds of oily sludge on the physiological and biochemical parameters of mung bean plants. Higher proportions of residues decreased the germination rates and enzyme activity of mung beans compared to uncontaminated soil. When pyrolysis residue, hot-washing residue, and high-temperature thermal oxidation residue are used in green planting soil, their content must be lower than 30%, 90%, and 70%, respectively. Additionally, our findings indicated that the accumulation level of pollutants in oily sludge heat treatment residues was not high. However, the three kinds of residues exhibited different degrees of plant toxicity. The pyrolysis residue still exhibited strong ecotoxicity, even at low concentrations. In contrast, the toxicity of the hot-washing residue was much lower than that of the pyrolysis residue and the high-temperature thermal oxidation residue. Our findings indicated that mung bean is highly tolerant of contaminated soil and is therefore well suited for phytoremediation applications.

Evaluating the simulated toxicities of metal mixtures and hydrocarbons using the alkane degrading bioreporter Acinetobacter baylyi ADPWH_recA

Oil spillages lead to the formation of hydrocarbon and metal mixtures possessing effects on alkane-degrading bacteria that are responsible for the bioremediation of oil-contaminated soils and waters. Studies of bacterial responses to the mixture of petroleum and metal can inform appropriate strategies for bioremediation. We employed a luminescent bioreporter Acinetobacter baylyi ADPWH_recA with alkane degradation capability to evaluate the combined effects from heavy metals (Cd, Pb and Cu) and alkanes (dodecane, tetradecane, hexadecane and octadecane). Bioluminescent ratios of ADPWH_recA in single Cd or Pb treatments ranged from 0.25 to 1.98, indicating both genotoxicity and cytotoxicity of these two metals, while ratios < 1.0 postexposure to Cu showed its cytotoxic impacts on ADPWH_recA bioreporter. Metal mixtures exhibited enhanced antagonistic effects (Ti>4.0) determined by the Toxic Unit model. With 100 mg/L alkane, the morbidity of ADPWH-recA reduced to < 20%, showing the inhibition of alkanes on Cd toxicity. Exposed to the metal mixture containing 10 mg/L Cu, the weak binding affinity of Cu with alkanes contributed to a high morbidity of > 85% in ADPWH_recA cells. This study provides a new way to understand the toxicity of mixture contaminants, which can help to optimize treatment efficiencies of bacterial remediation for oil contamination.

Applying Raman Microspectroscopy to Evaluate the Effects of Nutrient Cations on Alkane Bioavailability to Acinetobacter baylyi ADP1

Contamination with petroleum hydrocarbons causes extensive damage to ecological systems. On oil-contaminated sites, alkanes are major components; many indigenous bacteria can access and/or degrade alkanes. However, their ability to do so is affected by external properties of the soil, including nutrient cations. This study used Raman microspectroscopy to study how nutrient cations affect alkanes' bioavailability to Acinetobacter baylyi ADP1 (a known degrader). Treated with Na, K, Mg, and Ca at 10 mM, A. baylyi was exposed to seven n-alkanes (decane, dodecane, tetradecane, hexadecane, nonadecane, eicosane, and tetracosane) and one alkane mixture (mineral oil). Raman spectral analysis indicated that bioavailability of alkanes varied with carbon chain lengths, and additional cations altered the bacterial response to n-alkanes. Sodium significantly increased the bacterial affinity toward decane and dodecane, and K and Mg enhanced the bioavailability of tetradecane and hexadecane. In contrast, the bacterial response was inhibited by Ca for all alkanes. Similar results were observed in mineral oil exposure. Our study employed Raman spectral assay to offer a deep insight into how nutrient cations affect the bioavailability of alkanes, suggesting that nutrient cations can play a key role in influencing the harmful effects of hydrocarbons and could be optimized to enhance the bioremediation strategy.

iTRAQ-Based Comparative Proteomic Analysis of Acinetobacter baylyi ADP1 Under DNA Damage in Relation to Different Carbon Sources

DNA damage response allows microorganisms to repair or bypass DNA damage and maintain the genome integrity. It has attracted increasing attention but the underlying influential factors affecting DNA damage response are still unclear. In this work, isobaric tags for relative and absolute quantification (iTRAQ)-based proteomic analysis was used to investigate the influence of carbon sources on the translational response of Acinetobacter baylyi ADP1 to DNA damage. After cultivating in a nutrient-rich medium (LB) and defined media supplemented with four different carbon sources (acetate, citrate, pyruvate, and succinate), a total of 2807 proteins were identified. Among them, 84 proteins involved in stress response were significantly altered, indicating the strong influence of carbon source on the response of A. baylyi ADP1 to DNA damage and other stresses. As the first study on the comparative global proteomic changes in A. baylyi ADP1 under DNA damage across nutritional environments, our findings revealed that DNA damage response in A. baylyi ADP1 at the translational level is significantly altered by carbon source, providing an insight into the complex protein interactions across carbon sources and offering theoretical clues for further study to elucidate their general regulatory mechanism to adapt to different nutrient environments.