Neuromusculoskeletal Modeling-Based Prostheses for Recovery After Spinal Cord Injury

Medical Digital Twin: A Review on Technical Principles and Clinical Applications

The usage of digital twins (DTs) is growing across a wide range of businesses. The health sector is one area where DT use has recently increased. Ultimately, the concept of digital health twins holds the potential to enhance human existence by transforming disease prevention, health preservation, diagnosis, treatment, and management. Big data's explosive expansion, combined with ongoing developments in data science (DS) and artificial intelligence (AI), might greatly speed up research and development by supplying crucial data, a strong cyber technical infrastructure, and scientific know-how. The field of healthcare applications is still in its infancy, despite the fact that there are several DT programs in the military and industry. This review's aim is to present this cutting-edge technology, which focuses on neurology, as one of the most exciting new developments in the medical industry. Through innovative research and development in DT technology, we anticipate the formation of a global cooperative effort among stakeholders to improve health care and the standard of living for millions of people globally.

Automatic Assist Level Adjustment Function of a Gait Exercise Rehabilitation Robot with Functional Electrical Stimulation for Spinal Cord Injury: Insights from Clinical Trials

This study aimed to identify whether the combined use of functional electrical stimulation (FES) reduces the motor torque of a gait exercise rehabilitation robot in spinal cord injury (SCI) and to verify the effectiveness of the developed automatic assist level adjustment in people with paraplegia. Acute and chronic SCI patients (1 case each) performed 10 min of gait exercises with and without FES using a rehabilitation robot. Reinforcement learning was used to adjust the assist level automatically. The maximum torque values and assist levels for each of the ten walking cycles when walking became steady were averaged and compared with and without FES. The motor's output torque and the assist level were measured as outcomes. The assist level adjustment allowed both the motor torque and assist level to decrease gradually to a steady state. The motor torque and the assist levels were significantly lower with the FES than without the FES under steady conditions in both cases. No adverse events were reported. The combined use of FES attenuated the motor torque of a gait exercise rehabilitation robot for SCI. Automatic assistive level adjustment is also useful for spinal cord injuries.

Joint contact forces during semi-recumbent seated cycling

Semi-recumbent cycling performed from a wheelchair is a popular rehabilitation exercise following spinal cord injury (SCI) and is often paired with functional electrical stimulation. However, biomechanical assessment of this cycling modality is lacking, even in unimpaired populations, hindering the development of personalised and safe rehabilitation programs for those with SCI. This study developed a computational pipeline to determine lower limb kinematics, kinetics, and joint contact forces (JCF) in 11 unimpaired participants during voluntary semi-recumbent cycling using a rehabilitation ergometer. Two cadences (40 and 60 revolutions per minute) and three crank powers (15 W, 30 W, and 45 W) were assessed. A rigid body model of a rehabilitation ergometer was combined with a calibrated electromyogram-informed neuromusculoskeletal model to determine JCF at the hip, knee, and ankle. Joint excursions remained consistent across all cadence and powers, but joint moments and JCF differed between 40 and 60 revolutions per minute, with peak JCF force significantly greater at 40 compared to 60 revolutions per minute for all crank powers. Poor correlations were found between mean crank power and peak JCF across all joints. This study provides foundation data and computational methods to enable further evaluation and optimisation of semi-recumbent cycling for application in rehabilitation after SCI and other neurological disorders.

Continuous Motion Intention Prediction Using sEMG for Upper-Limb Rehabilitation: A Systematic Review of Model-Based and Model-Free Approaches

Upper limb functional impairments persisting after stroke significantly affect patients' quality of life. Precise adjustment of robotic assistance levels based on patients' motion intentions using sEMG signals is crucial for active rehabilitation. This paper systematically reviews studies on continuous prediction of upper limb single joints and multi-joint combinations motion intention using Model-Based (MB) and Model-Free (MF) approaches over the past decade, based on 186 relevant studies screened from six major electronic databases. The findings indicate ongoing challenges in terms of subject composition, algorithm robustness and generalization, and algorithm feasibility for practical applications. Moreover, it suggests integrating the strengths of both MB and MF approaches to improve existing algorithms. Therefore, future research should further explore personalized MB-MF combination methods incorporating deep learning, attention mechanisms, muscle synergy features, motor unit features, and closed-loop feedback to achieve precise, real-time, and long-duration prediction of multi-joint complex movements, while further refining the transfer learning strategy for rapid algorithm deployment across days and subjects. Overall, this review summarizes the current research status, significant findings, and challenges, aiming to inspire future research on predicting upper limb motion intentions based on sEMG.

Towards co-design of rehabilitation technologies: a collaborative approach to prioritize usability issues

Introduction

Early stakeholder engagement is critical to the successful development and translation of rehabilitation technologies, a pivotal step of which is usability testing with intended end-users. To this end, several methods employ end-user feedback to identify usability and implementation issues. However, the process of prioritizing identified issues seldom leverages the knowledge and expertise of the range of stakeholders who will ultimately affect the demand and supply of a device. This paper describes a novel method to prioritize end-user feedback using transdisciplinary stakeholder consultation and address it in subsequent product development. The proposed approach was demonstrated using a case study relating to the development of a novel technology for neural recovery after spinal cord injury.

Method

Feedback from five individuals with chronic spinal cord injury was collected during two-hour usability evaluation sessions with a fully functional high-fidelity system prototype. A think-aloud and semi-structured interview protocol was used with each participant to identify usability and acceptability issues relating to the system in a 3-phase approach. Phase 1 involved extracting usability issues from think-aloud and semi-structured interview data. Phase 2 involved rating the usability issues based on their significance, technical feasibility, and implementation priority by relevant internal and external stakeholders. Finally, Phase 3 involved aggregating the usability issues according to design and implementation elements to facilitate solution generation, and these solutions were then raised as action tasks for future design iterations.

Results

Sixty usability issues representing nine facets of usability were rated. Eighty percent of issues were rated to be of moderate to high significance, 83% were rated as being feasible to address, and 75% were rated as addressable using existing project resources. Fifty percent of the issues were rated to be a high priority for implementation. Evaluation of the grouped issues identified 21 tasks which were mapped to the product roadmap for integration into future design iterations.

Discussion

This paper presents a method for meaningful transdisciplinary stakeholder engagement in rehabilitation technology development that can extended to other projects. Alongside a worked example, we offer practical considerations for others seeking to co-develop rehabilitation technologies.

A Digital Twin Framework for Precision Neuromusculoskeletal Health Care: Extension Upon Industrial Standards

There is a powerful global trend toward deeper integration of digital twins into modern life driven by Industry 4.0 and 5.0. Defense, agriculture, engineering, manufacturing, and urban planning sectors have thoroughly incorporated digital twins to great benefit across their respective product lifecycles. Despite clear benefits, a digital twin framework for health and medical sectors is yet to emerge. This paper proposes a digital twin framework for precision neuromusculoskeletal health care. We build upon the International Standards Organization framework for digital twins for manufacturing by presenting best available computational models within a digital twin framework for clinical application. We map a use case for modeling Achilles tendon mechanobiology, highlighting how current modeling practices align with our proposed digital twin framework. Similarly, we map a use case for advanced neurorehabilitation technology, highlighting the role of a digital twin in control of systems where human and machine are interfaced. Future work must now focus on creating an informatic representation to govern how digital data are passed to, from, and within the digital twin, as well as specific standards to declare which measurement systems and modeling methods are acceptable to move toward widespread use of the digital twin framework for precision neuromusculoskeletal health care.

Estimation of Joint Torque by EMG-Driven Neuromusculoskeletal Models and LSTM Networks

Accurately predicting joint torque using wearable sensors is crucial for designing assist-as-needed exoskeleton controllers to assist muscle-generated torque and ensure successful task performance. In this paper, we estimated ankle dorsiflexion/plantarflexion, knee flexion/extension, hip flexion/extension, and hip abduction/adduction torques from electromyography (EMG) and kinematics during daily activities using neuromusculoskeletal (NMS) models and long short-term memory (LSTM) networks. The joint torque ground truth for model calibrating and training was obtained through inverse dynamics of captured motion data. A cluster approach that grouped movements based on characteristic similarity was implemented, and its ability to improve the estimation accuracy of both NMS and LSTM models was evaluated. We compared torque estimation accuracy of NMS and LSTM models in three cases: Pooled, Individual, and Clustered models. Pooled models used data from all 10 movements to calibrate or train one model, Individual models used data from each individual movement, and Clustered models used data from each cluster. Individual, Clustered and Pooled LSTM models all had relatively high joint torque estimation accuracy. Individual and Clustered NMS models had similarly good estimation performance whereas the Pooled model may be too generic to satisfy all movement patterns. While the cluster approach improved the estimation accuracy in NMS models in some movements, it made relatively little difference in the LSTM neural networks, which already had high estimation accuracy. Our study provides practical implications for designing assist-as-needed exoskeleton controllers by offering guidelines for selecting the appropriate model for different scenarios, and has potential to enhance the functionality of wearable exoskeletons and improve rehabilitation and assistance for individuals with motor disorders.

Neuromusculoskeletal model-informed machine learning-based control of a knee exoskeleton with uncertainties quantification

Introduction

Research interest in exoskeleton assistance strategies that incorporate the user's torque capacity is growing rapidly. However, the predicted torque capacity from users often includes uncertainty from various sources, which can have a significant impact on the safety of the exoskeleton-user interface.

Methods

To address this challenge, this paper proposes an adaptive control framework for a knee exoskeleton that uses muscle electromyography (EMG) signals and joint kinematics. The framework predicted the user's knee flexion/extension torque with confidence bounds to quantify the uncertainty based on a neuromusculoskeletal (NMS) solver-informed Bayesian Neural Network (NMS-BNN). The predicted torque, with a specified confidence level, controlled the assistive torque provided by the exoskeleton through a TCP/IP stream. The performance of the NMS-BNN model was also compared to that of the Gaussian process (NMS-GP) model.

Results

Our findings showed that both the NMS-BNN and NMS-GP models accurately predicted knee joint torque with low error, surpassing traditional NMS models. High uncertainties were observed at the beginning of each movement, and at terminal stance and terminal swing in self-selected speed walking in both NMS-BNN and NMS-GP models. The knee exoskeleton provided the desired assistive torque with a low error, although lower torque was observed during terminal stance of fast walking compared to self-selected walking speed.

Discussion

The framework developed in this study was able to predict knee flexion/extension torque with quantifiable uncertainty and to provide adaptive assistive torque to the user. This holds significant potential for the development of exoskeletons that provide assistance as needed, with a focus on the safety of the exoskeleton-user interface.

Ten steps to becoming a musculoskeletal simulation expert: A half-century of progress and outlook for the future

Over the past half-century, musculoskeletal simulations have deepened our knowledge of human and animal movement. This article outlines ten steps to becoming a musculoskeletal simulation expert so you can contribute to the next half-century of technical innovation and scientific discovery. We advocate looking to the past, present, and future to harness the power of simulations that seek to understand and improve mobility. Instead of presenting a comprehensive literature review, we articulate a set of ideas intended to help researchers use simulations effectively and responsibly by understanding the work on which today's musculoskeletal simulations are built, following established modeling and simulation principles, and branching out in new directions.

Systematic review of digital twin technology and applications

As one of the most important applications of digitalization, intelligence, and service, the digital twin (DT) breaks through the constraints of time, space, cost, and security on physical entities, expands and optimizes the relevant functions of physical entities, and enhances their application value. This phenomenon has been widely studied in academia and industry. In this study, the concept and definition of DT, as utilized by scholars and researchers in various fields of industry, are summarized. The internal association between DT and related technologies is explained. The four stages of DT development history are identified. The fundamentals of the technology, evaluation indexes, and model frameworks are reviewed. Subsequently, a conceptual ternary model of DT based on time, space, and logic is proposed. The technology and application status of typical DT systems are described. Finally, the current technical challenges of DT technology are analyzed, and directions for future development are discussed.

Maintaining soldier musculoskeletal health using personalised digital humans, wearables and/or computer vision

OBJECTIVES

The physical demands of military service place soldiers at risk of musculoskeletal injuries and are major concerns for military capability. This paper outlines the development new training technologies to prevent and manage these injuries.

DESIGN

Narrative review.

METHODS

Technologies suitable for integration into next-generation training devices were examined. We considered the capability of technologies to target tissue level mechanics, provide appropriate real-time feedback, and their useability in-the-field.

RESULTS

Musculoskeletal tissues' health depends on their functional mechanical environment experienced in military activities, training and rehabilitation. These environments result from the interactions between tissue motion, loading, biology, and morphology. Maintaining health of and/or repairing joint tissues requires targeting the "ideal" in vivo tissue mechanics (i.e., loading and strain), which may be enabled by real-time biofeedback. Recent research has shown that these biofeedback technologies are possible by integrating a patient's personalised digital twin and wireless wearable devices. Personalised digital twins are personalised neuromusculoskeletal rigid body and finite element models that work in real-time by code optimisation and artificial intelligence. Model personalisation is crucial in obtaining physically and physiologically valid predictions.

CONCLUSIONS

Recent work has shown that laboratory-quality biomechanical measurements and modelling can be performed outside the laboratory with a small number of wearable sensors or computer vision methods. The next stage is to combine these technologies into well-designed easy to use products.

Towards next generation digital twin in robotics: Trends, scopes, challenges, and future

With the advent of Industry 4.0, several cutting-edge technologies such as cyber-physical systems, digital twins, IoT, robots, big data, cloud computation have emerged. However, how these technologies are interconnected or fused for collaborative and increased functionality is what elevates 4.0 to a grand scale. Among these fusions, the digital twin (DT) in robotics is relatively new but has unrivaled possibilities. In order to move forward with DT-integrated robotics research, a complete evaluation of the literature and the creation of a framework are now required. Given the importance of this research, the paper seeks to explore the trends of DT incorporated robotics in both high and low research saturated robotic domains in order to discover the gap, rising and dying trends, potential scopes, challenges, and viable solutions. Finally, considering the findings, the study proposes a framework based on a hypothesis for the future paradigm of DT incorporated robotics.

Co-simulation of human digital twins and wearable inertial sensors to analyse gait event estimation

We propose a co-simulation framework comprising biomechanical human body models and wearable inertial sensor models to analyse gait events dynamically, depending on inertial sensor type, sensor positioning, and processing algorithms. A total of 960 inertial sensors were virtually attached to the lower extremities of a validated biomechanical model and shoe model. Walking of hemiparetic patients was simulated using motion capture data (kinematic simulation). Accelerations and angular velocities were synthesised according to the inertial sensor models. A comprehensive error analysis of detected gait events versus reference gait events of each simulated sensor position across all segments was performed. For gait event detection, we considered 1-, 2-, and 4-phase gait models. Results of hemiparetic patients showed superior gait event estimation performance for a sensor fusion of angular velocity and acceleration data with lower nMAEs (9%) across all sensor positions compared to error estimation with acceleration data only. Depending on algorithm choice and parameterisation, gait event detection performance increased up to 65%. Our results suggest that user personalisation of IMU placement should be pursued as a first priority for gait phase detection, while sensor position variation may be a secondary adaptation target. When comparing rotatory and translatory error components per body segment, larger interquartile ranges of rotatory errors were observed for all phase models i.e., repositioning the sensor around the body segment axis was more harmful than along the limb axis for gait phase detection. The proposed co-simulation framework is suitable for evaluating different sensor modalities, as well as gait event detection algorithms for different gait phase models. The results of our analysis open a new path for utilising biomechanical human digital twins in wearable system design and performance estimation before physical device prototypes are deployed.

Designing a Clinical Trial with Olfactory Ensheathing Cell Transplantation-Based Therapy for Spinal Cord Injury: A Position Paper

Spinal cord injury (SCI) represents an urgent unmet need for clinical reparative therapy due to its largely irreversible and devastating effects on patients, and the tremendous socioeconomic burden to the community. While different approaches are being explored, therapy to restore the lost function remains unavailable. Olfactory ensheathing cell (OEC) transplantation is a promising approach in terms of feasibility, safety, and limited efficacy; however, high variability in reported clinical outcomes prevent its translation despite several clinical trials. The aims of this position paper are to present an in-depth analysis of previous OEC transplantation-based clinical trials, identify existing challenges and gaps, and finally propose strategies to improve standardization of OEC therapies. We have reviewed the study design and protocols of clinical trials using OEC transplantation for SCI repair to investigate how and why the outcomes show variability. With this knowledge and our experience as a team of biologists and clinicians with active experience in the field of OEC research, we provide recommendations regarding cell source, cell purity and characterisation, transplantation dosage and format, and rehabilitation. Ultimately, this position paper is intended to serve as a roadmap to design an effective clinical trial with OEC transplantation-based therapy for SCI repair.

Lower-limb Joint Torque Prediction using LSTM Neural Networks and Transfer Learning

Estimation of joint torque during movement provides important information in several settings, such as effect of athletes' training or of a medical intervention, or analysis of the remaining muscle strength in a wearer of an assistive device. The ability to estimate joint torque during daily activities using wearable sensors is increasingly relevant in such settings. In this study, lower limb joint torques during ten daily activities were predicted by long short-term memory (LSTM) neural networks and transfer learning. LSTM models were trained with muscle electromyography signals and lower limb joint angles. Hip flexion/extension, hip abduction/adduction, knee flexion/extension and ankle dorsiflexion/plantarflexion torques were predicted. The LSTM models' performance in predicting torque was investigated in both intra-subject and inter-subject scenarios. Each scenario was further divided into intra-task and inter-task tests. We observed that LSTM models could predict lower limb joint torques during various activities accurately with relatively low error (root mean square error ≤ 0.14 Nm/kg, normalized root mean square error ≤8.7%) either through a uniform model or through ten separate models in intra-subject tests. Furthermore, a transfer learning technique was adopted in the inter-task and inter-subject tests to further improve the generalizability of LSTM models by pre-training a model on multiple subjects and/or tasks and transferring the learned knowledge to a target task/subject. Particularly in the inter-subject tests, we could predict joint torques accurately in several movements after training from only a few movements from new subjects.

Identification of Motor Unit Twitch Properties in the Intact Human In Vivo

Restoring natural motor function in neurologically injured individuals is challenging, largely due to the lack of personalization in current neurorehabilitation technologies. Signal-driven neuro-musculoskeletal models may offer a novel paradigm for devising novel closed-loop rehabilitation strategies according to an individual's physiology. However, current modelling techniques are constrained to bipolar electromyography (EMG), thereby lacking the resolution necessary to extract the activity of individual motor units (MUs) in vivo. In this work, we decoded MU spike trains from high-density (HD)-EMG to obtain relevant neural properties across multiple isometric plantar-dorsiflexion tasks. Then, we sampled MU statistical distributions and used them to reproduce MU specific activation profiles. Results showed bimodal distributions which may correspond to slow and fast MU populations. The estimated activation profiles showed a high degree of similarity to the reference torque (R²>0.8) across the recorded muscles. This suggests that the estimation of MU twitch properties is a crucial step for the translation of neural information into muscle force.Clinical Relevance- This work has multiple implications for understanding the underlying mechanism of motor impairment and for developing closed-loop strategies for modulating alpha motor circuitries in neurologically injured individuals.

Neuromodulation as a basic platform for neuroprotection and repair after spinal cord injury

Spinal cord injury (SCI) is one of the most challenging medical issues. Spasticity is a major complication of SCI. A combination of spinal cord stimulation, new methods of neuroprotection and biomedical cellular products provides fundamentally new options for SCI treatment and rehabilitation. The paper attempts to critically analyze the effectiveness of using these procedures for patients with SCI, suggesting a protocol for a step-by-step personalized treatment of SCI, based on continuity of modern conservative and surgical methods. The study argues the possibility of using neuromodulation as a basis for rehabilitating patients with SCI.

Digital Twins for Multiple Sclerosis

An individualized innovative disease management is of great importance for people with multiple sclerosis (pwMS) to cope with the complexity of this chronic, multidimensional disease. However, an individual state of the art strategy, with precise adjustment to the patient's characteristics, is still far from being part of the everyday care of pwMS. The development of digital twins could decisively advance the necessary implementation of an individualized innovative management of MS. Through artificial intelligence-based analysis of several disease parameters - including clinical and para-clinical outcomes, multi-omics, biomarkers, patient-related data, information about the patient's life circumstances and plans, and medical procedures - a digital twin paired to the patient's characteristic can be created, enabling healthcare professionals to handle large amounts of patient data. This can contribute to a more personalized and effective care by integrating data from multiple sources in a standardized manner, implementing individualized clinical pathways, supporting physician-patient communication and facilitating a shared decision-making. With a clear display of pre-analyzed patient data on a dashboard, patient participation and individualized clinical decisions as well as the prediction of disease progression and treatment simulation could become possible. In this review, we focus on the advantages, challenges and practical aspects of digital twins in the management of MS. We discuss the use of digital twins for MS as a revolutionary tool to improve diagnosis, monitoring and therapy refining patients' well-being, saving economic costs, and enabling prevention of disease progression. Digital twins will help make precision medicine and patient-centered care a reality in everyday life.

Prelude to the special issue on novel neurocircuit, cellular and molecular targets for developing functional rehabilitation therapies of neurotrauma

The poor endogenous recovery capacity and other impediments to reinstating sensorimotor or autonomic function after adult neurotrauma have perplexed modern neuroscientists, bioengineers, and physicians for over a century. However, despite limited improvement in options to mitigate acute pathophysiological sequalae, the past 20 years have witnessed marked progresses in developing efficacious rehabilitation strategies for chronic spinal cord and brain injuries. The achievement is mainly attributable to research advancements in elucidating neuroplastic mechanisms for the potential to enhance clinical prognosis. Innovative cross-disciplinary studies have established novel therapeutic targets, theoretical frameworks, and regiments to attain treatment efficacy. This Special Issue contained eight papers that described experimental and human data along with literature reviews regarding the essential roles of the conventionally undervalued factors in neural repair: systemic inflammation, neural-respiratory inflammasome axis, modulation of glutamatergic and monoaminergic neurotransmission, neurogenesis, nerve transfer, recovery neurobiology components, and the spinal cord learning, respiration and central pattern generator neurocircuits. The focus of this work was on how to induce functional recovery from manipulating these underpinnings through their interactions with secondary injury events, peripheral and supraspinal inputs, neuromusculoskeletal network, and interventions (i.e., activity training, pharmacological adjuncts, electrical stimulation, and multimodal neuromechanical, brain-computer interface [BCI] and robotic assistance [RA] devices). The evidence suggested that if key neurocircuits are therapeutically reactivated, rebuilt, and/or modulated under proper sensory feedback, neurological function (e.g., cognition, respiration, limb movement, locomotion, etc.) will likely be reanimated after neurotrauma. The efficacy can be optimized by individualizing multimodal rehabilitation treatments via BCI/RA-integrated drug administration and neuromechanical protheses.

Tibiofemoral forces during FES rowing in individuals with spinal cord injury

The purpose of this study is to determine the tibiofemoral forces during functional electrical stimulation (FES) rowing in individuals with spinal cord injury (SCI). We analysed the motion of five participants with SCI during FES rowing, with simultaneous measurements of (i) three-dimensional marker trajectories, (ii) foot reaction forces (FRFs), (iii) ergometer handle forces, and (iv) timestamps for electrical stimulation of the quadriceps and hamstrings muscles. We created full-body musculoskeletal models in OpenSim to determine subject-specific tibiofemoral forces during FES rowing. The peak magnitudes of tibiofemoral forces averaged over five participants with SCI were 2.43 ± 0.39 BW and 2.25 ± 0.71 BW for the left and right legs, respectively. The peak magnitudes of FRFs were 0.19 ± 0.04 BW in each leg. The peak magnitude of handle forces was 0.47 ± 0.19 BW. Peak tibiofemoral force was associated with peak FRF (magnitudes, R² = 0.56, p = 0.013) and peak handle force (magnitudes, R² = 0.54, p = 0.016). The ratios of peak magnitude of tibiofemoral force to peak magnitude of FRF were 12.9 ± 1.9 (left) and 11.6 ± 2.4 (right), and to peak magnitude of handle force were 5.7 ± 2.3 (left) and 4.9 ± 0.9 (right). This work lays the foundation for developing a direct exercise intensity metric for bone mechanical stimulus at the knee during rehabilitation exercises. Clinical Significance: Knowledge of tibiofemoral forces from exercises such as FES rowing may provide clinicians the ability to personalize rehabilitation protocols to ensure that an SCI patient is receiving the minimum dose of mechanical stimulus necessary to maintain bone health.