The Perception of a Three-Dimensional-Printed Heart Model from the Perspective of Different Stakeholders: A Complex Case of Truncus Arteriosus

Cardiovascular computed tomography in cardiovascular disease: An overview of its applications from diagnosis to prediction

Cardiovascular computed tomography angiography (CTA) is a widely used imaging modality in the diagnosis of cardiovascular disease. Advancements in CT imaging technology have further advanced its applications from high diagnostic value to minimising radiation exposure to patients. In addition to the standard application of assessing vascular lumen changes, CTA-derived applications including 3D printed personalised models, 3D visualisations such as virtual endoscopy, virtual reality, augmented reality and mixed reality, as well as CT-derived hemodynamic flow analysis and fractional flow reserve (FFRCT) greatly enhance the diagnostic performance of CTA in cardiovascular disease. The widespread application of artificial intelligence in medicine also significantly contributes to the clinical value of CTA in cardiovascular disease. Clinical value of CTA has extended from the initial diagnosis to identification of vulnerable lesions, and prediction of disease extent, hence improving patient care and management. In this review article, as an active researcher in cardiovascular imaging for more than 20 years, I will provide an overview of cardiovascular CTA in cardiovascular disease. It is expected that this review will provide readers with an update of CTA applications, from the initial lumen assessment to recent developments utilising latest novel imaging and visualisation technologies. It will serve as a useful resource for researchers and clinicians to judiciously use the cardiovascular CT in clinical practice.

Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: pediatric congenital heart disease conditions

BACKGROUND

The use of medical 3D printing (focusing on anatomical modeling) has continued to grow since the Radiological Society of North America's (RSNA) 3D Printing Special Interest Group (3DPSIG) released its initial guideline and appropriateness rating document in 2018. The 3DPSIG formed a focused writing group to provide updated appropriateness ratings for 3D printing anatomical models across a variety of congenital heart disease. Evidence-based- (where available) and expert-consensus-driven appropriateness ratings are provided for twenty-eight congenital heart lesion categories.

METHODS

A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with pediatric congenital heart disease indications. Each study was vetted by the authors and strength of evidence was assessed according to published appropriateness ratings.

RESULTS

Evidence-based recommendations for when 3D printing is appropriate are provided for pediatric congenital heart lesions. Recommendations are provided in accordance with strength of evidence of publications corresponding to each cardiac clinical scenario combined with expert opinion from members of the 3DPSIG.

CONCLUSIONS

This consensus appropriateness ratings document, created by the members of the RSNA 3DPSIG, provides a reference for clinical standards of 3D printing for pediatric congenital heart disease clinical scenarios.

Cardiovascular Computed Tomography in the Diagnosis of Cardiovascular Disease: Beyond Lumen Assessment

Cardiovascular CT is being widely used in the diagnosis of cardiovascular disease due to the rapid technological advancements in CT scanning techniques. These advancements include the development of multi-slice CT, from early generation to the latest models, which has the capability of acquiring images with high spatial and temporal resolution. The recent emergence of photon-counting CT has further enhanced CT performance in clinical applications, providing improved spatial and contrast resolution. CT-derived fractional flow reserve is superior to standard CT-based anatomical assessment for the detection of lesion-specific myocardial ischemia. CT-derived 3D-printed patient-specific models are also superior to standard CT, offering advantages in terms of educational value, surgical planning, and the simulation of cardiovascular disease treatment, as well as enhancing doctor-patient communication. Three-dimensional visualization tools including virtual reality, augmented reality, and mixed reality are further advancing the clinical value of cardiovascular CT in cardiovascular disease. With the widespread use of artificial intelligence, machine learning, and deep learning in cardiovascular disease, the diagnostic performance of cardiovascular CT has significantly improved, with promising results being presented in terms of both disease diagnosis and prediction. This review article provides an overview of the applications of cardiovascular CT, covering its performance from the perspective of its diagnostic value based on traditional lumen assessment to the identification of vulnerable lesions for the prediction of disease outcomes with the use of these advanced technologies. The limitations and future prospects of these technologies are also discussed.

Medical 3D Printing Using Desktop Inverted Vat Photopolymerization: Background, Clinical Applications, and Challenges

Medical 3D printing is a complex, highly interdisciplinary, and revolutionary technology that is positively transforming the care of patients. The technology is being increasingly adopted at the Point of Care (PoC) as a consequence of the strong value offered to medical practitioners. One of the key technologies within the medical 3D printing portfolio enabling this transition is desktop inverted Vat Photopolymerization (VP) owing to its accessibility, high quality, and versatility of materials. Several reports in the peer-reviewed literature have detailed the medical impact of 3D printing technologies as a whole. This review focuses on the multitude of clinical applications of desktop inverted VP 3D printing which have grown substantially in the last decade. The principles, advantages, and challenges of this technology are reviewed from a medical standpoint. This review serves as a primer for the continually growing exciting applications of desktop-inverted VP 3D printing in healthcare.

3D printing of foetal vascular rings: feasibility and applicability

BACKGROUND

Vascular rings (VRs) exhibit complex and diverse forms that are difficult to conceptualize using traditional two-dimensional (2D) schematic. Inexperienced medical students and parents who lack a medical technology background face significant challenges in understanding VRs. The purpose of this research is to develop three-dimensional (3D) printing models of VRs to provide new technical imaging support for medical education and parental consultation.

METHODS

This study included 42 fetuses diagnosed as VRs. Foetal echocardiography, modeling and 3D printing were performed, and the dimensional accuracy of models was analyzed. The value of 3D printing in the teaching of VRs was analyzed based on comparing the test results before and after the teaching intervention of 48 medical students and the satisfaction survey. A brief survey was conducted to 40 parents to assess the value of the 3D printed model in prenatal consultations.

RESULTS

Forty models of VRs were successfully obtained, which reproduced the anatomical shape of the VRs space with high dimensional accuracy. No differences in the prelecture test results were noted between the 3D printing group and the 2D image group. After the lecture, the knowledge of both groups improved, but the postlecture score and the change in the prelecture versus postlecture score were greater in the 3D printing group, and the subjective satisfaction survey feedback in the 3D printing group was also better (P < 0.05). Similar results were observed from the parental questionnaire, the vast majority of parents have an enthusiastic and positive attitude towards the use of 3D printed models and suggest using them in future prenatal consultations.

CONCLUSIONS

Three-dimensional printing technology providing a new tool for effectively displaying different types of foetal VRs. This tool helps physicians and families understand the complex structure of foetal great vessels, positively impacting medical instruction and prenatal counselling.

Patient-Specific 3D-Printed Models in Pediatric Congenital Heart Disease

Three-dimensional (3D) printing technology has become increasingly used in the medical field, with reports demonstrating its superior advantages in both educational and clinical value when compared with standard image visualizations or current diagnostic approaches. Patient-specific or personalized 3D printed models serve as a valuable tool in cardiovascular disease because of the difficulty associated with comprehending cardiovascular anatomy and pathology on 2D flat screens. Additionally, the added value of using 3D-printed models is especially apparent in congenital heart disease (CHD), due to its wide spectrum of anomalies and its complexity. This review provides an overview of 3D-printed models in pediatric CHD, with a focus on educational value for medical students or graduates, clinical applications such as pre-operative planning and simulation of congenital heart surgical procedures, and communication between physicians and patients/parents of patients and between colleagues in the diagnosis and treatment of CHD. Limitations and perspectives on future research directions for the application of 3D printing technology into pediatric cardiology practice are highlighted.

3D Printed Models in Cardiovascular Disease: An Exciting Future to Deliver Personalized Medicine

3D printing has shown great promise in medical applications with increased reports in the literature. Patient-specific 3D printed heart and vascular models replicate normal anatomy and pathology with high accuracy and demonstrate superior advantages over the standard image visualizations for improving understanding of complex cardiovascular structures, providing guidance for surgical planning and simulation of interventional procedures, as well as enhancing doctor-to-patient communication. 3D printed models can also be used to optimize CT scanning protocols for radiation dose reduction. This review article provides an overview of the current status of using 3D printing technology in cardiovascular disease. Limitations and barriers to applying 3D printing in clinical practice are emphasized while future directions are highlighted.

Development and implementation of a three-dimensional (3D) printing elective course for health science students

Three-dimensional (3D) printing technology has become more affordable, accessible, and relevant in healthcare, however, the knowledge of transforming medical images to physical prints still requires some level of training. Anatomy educators can play a pivotal role in introducing learners to 3D printing due to the spatial context inherent to learning anatomy. To bridge this knowledge gap and decrease the intimidation associated with learning 3D printing technology, an elective was developed through a collaboration between the Department of Anatomy and the Makers Lab at the University of California, San Francisco. A self-directed digital resource was created for the elective to guide learners through the 3D printing workflow, which begins with a patient's computed tomography digital imaging and communication in medicine (DICOM) file to a physical 3D printed model. In addition to practicing the 3D printing workflow during the elective, a series of guest speakers presented on 3D printing applications they utilize in their clinical practice and/or research laboratories. Student evaluations indicated that their intimidation associated with 3D printing decreased, the clinical and research topics were directly applicable to their intended careers, and they enjoyed the autonomy associated with the elective format. The elective and the associated digital resource provided students with the foundational knowledge of 3D printing, including the ability to extract, edit, manipulate, and 3D print from DICOM files, making 3D printing more accessible. The aim of disseminating this work is to help other anatomy educators adopt this curriculum at their institution.

The use of 3D-printed models in patient communication: a scoping review

3D models have been used as an asset in many clinical applications and a variety of disciplines, and yet the available literature studying the use of 3D models in communication is limited. This scoping review has been conducted to draw conclusions on the current evidence and learn from previous studies, using this knowledge to inform future work. Our search strategy revealed 269 papers, 19 of which were selected for final inclusion and analysis. When assessing the use of 3D models in doctor-patient communication, there is a need for larger studies and studies including a long-term follow up. Furthermore, there are forms of communication that are yet to be researched and provide a niche that may be beneficial to explore.

Three-dimensional printed moulds to obtain silicone hearts with congenital defects for paediatric heart-surgeon training

OBJECTIVES

Many types of congenital heart disease are amenable to surgical repair or palliation. The procedures are often challenging and require specific surgical training, with limited real-life exposure and often costly simulation options. Our objective was to create realistic and affordable 3D simulation models of the heart and vessels to improve training.

METHODS

We created moulded vessel models using several materials, to identify the material that best replicated human vascular tissue. This material was then used to make more vessels to train residents in cannulation procedures. Magnetic resonance imaging views of a 23-month-old patient with double-outlet right ventricle were segmented using free open-source software. Re-usable moulds produced by 3D printing served to create a silicone model of the heart, with the same material as the vessels, which was used by a heart surgeon to simulate a Rastelli procedure.

RESULTS

The best material was a soft elastic silicone (Shore A hardness 8). Training on the vessel models decreased the residents' procedural time and improved their grades on a performance rating scale. The surgeon evaluated the moulded heart model as realistic and was able to perform the Rastelli procedure on it. Even if the valves were poorly represented, it was found to be useful for preintervention training.

CONCLUSIONS

By using free segmentation software, a relatively low-cost silicone and a technique based on re-usable moulds, the cost of obtaining heart models suitable for training in congenital heart defect surgery can be substantially decreased.

Enhanced 3D visualization for planning biventricular repair of double outlet right ventricle: a pilot study on the advantages of virtual reality

Aims

We aim to determine any additional benefit of virtual reality (VR) experience if compared to conventional cross-sectional imaging and standard three-dimensional (3D) modelling when deciding on surgical strategy in patients with complex double outlet right ventricle (DORV).

Methods and results

We retrospectively selected 10 consecutive patients with DORV and complex interventricular communications, who underwent biventricular repair. An arterial switch operation (ASO) was part of the repair in three of those. Computed tomography (CT) or cardiac magnetic resonance imaging images were used to reconstruct patient-specific 3D anatomies, which were then presented using different visualization modalities: 3D pdf, 3D printed models, and VR models. Two experienced paediatric cardiac surgeons, blinded to repair performed, reviewed each case evaluating the suitability of repair following assessment of each visualization modalities. In addition, they had to identify those who had ASO as part of the procedure. Answers of the two surgeons were compared to the actual operations performed. There was no mortality during the follow-up (mean = 2.5 years). Two patients required reoperations. After review of CT/cardiac magnetic resonance images, the evaluators identified the surgical strategy in accordance with the actual surgical plan in 75% of the cases. When using 3D pdf this reached only 70%. Accordance improved to 85% after revision of 3D printed models and to 95% after VR. Use of 3D printed models and VR facilitated the identification of patients who required ASO.

Conclusion

Virtual reality can enhance understanding of suitability for biventricular repair in patients with complex DORV if compared to cross-sectional images and other 3D modelling techniques.

3D Printing for Cardiovascular Applications: From End-to-End Processes to Emerging Developments

3D printing as a means of fabrication has seen increasing applications in medicine in the last decade, becoming invaluable for cardiovascular applications. This rapidly developing technology has had a significant impact on cardiovascular research, its clinical translation and education. It has expanded our understanding of the cardiovascular system resulting in better devices, tools and consequently improved patient outcomes. This review discusses the latest developments and future directions of generating medical replicas ('phantoms') for use in the cardiovascular field, detailing the end-to-end process from medical imaging to capture structures of interest, to production and use of 3D printed models. We provide comparisons of available imaging modalities and overview of segmentation and post-processing techniques to process images for printing, detailed exploration of latest 3D printing methods and materials, and a comprehensive, up-to-date review of milestone applications and their impact within the cardiovascular domain across research, clinical use and education. We then provide an in-depth exploration of future technologies and innovations around these methods, capturing opportunities and emerging directions across increasingly realistic representations, bioprinting and tissue engineering, and complementary virtual and mixed reality solutions. The next generation of 3D printing techniques allow patient-specific models that are increasingly realistic, replicating properties, anatomy and function.

Three-dimensional printing in medicine: a systematic review of pediatric applications

BACKGROUND

Three-dimensional printing (3DP) addresses distinct clinical challenges in pediatric care including: congenital variants, compact anatomy, high procedural risk, and growth over time. We hypothesized that patient-specific applications of 3DP in pediatrics could be categorized into concise, discrete categories of use.

METHODS

Terms related to "three-dimensional printing" and "pediatrics" were searched on PubMed, Scopus, Ovid MEDLINE, Cochrane CENTRAL, and Web of Science. Initial search yielded 2122 unique articles; 139 articles characterizing 508 patients met full inclusion criteria.

RESULTS

Four categories of patient-specific 3DP applications were identified: Teaching of families and medical staff (9.3%); Developing intervention strategies (33.9%); Procedural applications, including subtypes: contour models, guides, splints, and implants (43.0%); and Material manufacturing of shaping devices or prosthetics (14.0%). Procedural comparative studies found 3DP devices to be equivalent or better than conventional methods, with less operating time and fewer complications.

CONCLUSION

Patient-specific applications of Three-Dimensional Printing in Medicine can be elegantly classified into four major categories: Teaching, Developing, Procedures, and Materials, sharing the same TDPM acronym. Understanding this schema is important because it promotes further innovation and increased implementation of these devices to improve pediatric care.

IMPACT

This article classifies the pediatric applications of patient-specific three-dimensional printing. This is a first comprehensive review of patient-specific three-dimensional printing in both pediatric medical and surgical disciplines, incorporating previously described classification schema to create one unifying paradigm. Understanding these applications is important since three-dimensional printing addresses challenges that are uniquely pediatric including compact anatomy, unique congenital variants, greater procedural risk, and growth over time. We identified four classifications of patient-specific use: teaching, developing, procedural, and material uses. By classifying these applications, this review promotes understanding and incorporation of this expanding technology to improve the pediatric care.

Three-Dimensional Printing: is it useful for Cardiac Surgery?

Introduction

The medical use of three-dimensional (3-D) images has been a topic in the literature since 1988, but 95% of papers on 3-D printing were published in the last six years. The increase in publications is the result of advances in 3-D printing methods, as well as of the increasing availability of these machines in different hospitals. This paper sought to review the literature on 3-D printing and to discuss thoughtful ideas regarding benefits and challenges to its incorporation into cardiothoracic surgeons’ routines.

Methods

A comprehensive and systematic search of the literature was performed in PubMed and included material published as of March 2020.

Results

Using this search strategy, 9,253 publications on 3-D printing and 497 on “heart” 3-D printing were retrieved.

Conclusion

3-D printed models are already helping surgeons to plan their surgeries, helping patients and their families to understand complex anatomy, helping fellows and residents to practice surgery, even for rare cases, and helping nurses and other health care staff to better understand some conditions, such as heart diseases.

Low-Cost Desktop-Based Three-Dimensional-Printed Patient-Specific Craniofacial Models in Surgical Counseling, Consent Taking, and Education of Parent of Craniosynostosis Patients: A Comparison With Conventional Visual Explanation Modalities

BACKGROUND

Craniosynostosis is a complex craniofacial deformity. Surgical decision, if needed, is always hard on the parent and requires the use of multimodalities of explanation. To the authors' knowledge, there have been no studies tackling family counseling about the deformity and surgical decision-making process with the use of low-cost patient-specific three-dimensional (3D)-printed models.

METHODS

A cross-sectional study investigating the utility of patient-specific 3D-printed models using a desktop-based 3D printer. Questionnaire was constructed and validated screening the demographics, knowledge, expectation, and surgical decision-making process supplied using Likert. Data were collected consecutively from each parent first after explanation with conventional 3D computed tomography (CT) images, and then repeated after the 3D-printed model has been presented.

RESULTS

Fourteen parents were screened. Majority of parents considered the pathology to have a potential effect of child's functional and aesthetic outcomes. After using the 3D-printed models, the participants had a clear vision and needed not to read any more about the condition (P = 0.05, P = 0.019, respectively). Agreement for surgical management was in favor of the 3D-printed models compared with CT images (P = 0.028). Explanation with CT images yielded higher mean score in knowledge about potential complications compared with 3D models (P value = 0.007). For the 3D models, average printing time was 26 hours, and a mean cost of 5.2$.

CONCLUSION

The utility of desktop 3D printing is an affordable modality to provide adequate information about craniosynostosis and can assist surgical decision-making. Knowledge and adaptation of such cheap technology represents a great skill aiding clinical practice.

Three-dimensional printing in congenital heart disease: Considerations on training and clinical implementation from a teaching session

In light of growing interest for three-dimensional printing technology in the cardiovascular community, this study focused on exploring the possibilities of providing training for cardiovascular three-dimensional printing in the context of a relevant international congress and providing considerations on the delivery of such courses. As a second objective, the study sought to capture preferences in relation to three-dimensional printing uses and set-ups from those attending the training session. A survey was administered to n = 30 professionals involved or interested in three-dimensional printing cardiovascular models following a specialised teaching session. Survey results suggest the potential for split training sessions, with a broader introduction for those with no prior experience in three-dimensional printing followed by a more in-depth and hands-on session. All participants agreed on the potential of the technology in all its applications, particularly for aiding decision-making around complex surgical or interventional cases. When exploring setting up an in-house three-dimensional printing service, the majority of participants reported that their centre was already equipped with an in-house facility or expressed a desire that such a facility should be available, with a minority preferring consigning models to an external third party for printing.

Imaging-Based 3-Dimensional Printing for Improved Maxillofacial Presurgical Planning: A Single Center Case Series

Purpose

3-D printing is an increasingly widespread technology that allows physical models to be constructed based on cross-sectional medical imaging data. We sought to develop a pipeline for production of 3-dimensional (3-D) models for presurgical planning and assess the value of these models for surgeons and patients.

Methods

In this institutional review board–approved, single-center case series, participating surgeons identified cases for 3-D model printing, and after obtaining patient consent, a 3-D model was produced for each of the 7 participating patients based on preoperative cross-sectional imaging. Each model was given to the surgeon to use during the surgical consent discussion and preoperative planning. Patients and surgeons completed questionnaires evaluating the quality and usefulness of the models.

Results

The 3-D models improved surgeon confidence in their operative approach, influencing the choice of operative approach in the majority of cases. Patients and surgeons reported that the model improved patient comprehension of the surgery during the consent discussion, including risks and benefits of the surgery. Model production time was as little as 4 days, and the average per-model cost was $350.

Conclusions

3-D printed models are useful presurgical tools from both surgeon and patient perspectives. Development of local hospital-based 3-D printing capabilities enables model production with rapid turnaround and modest cost, representing a value-added service for radiologists to offer their surgical colleagues.

Use of 3D Models in the Surgical Decision-Making Process in a Case of Double-Outlet Right Ventricle With Multiple Ventricular Septal Defects

3D printing has recently become an affordable means of producing bespoke models and parts. This has now been extended to models produced from medical imaging, such as computed tomography (CT). Here we report the production of a selection of 3D models to compliment the available imaging data for a 12-month-old child with double-outlet right ventricle and two ventricular septal defects. The models were produced to assist with case management and surgical planning. We used both stereolithography and polyjet techniques to produce white rigid and flexible color models, respectively. The models were discussed both at the joint multidisciplinary meeting and between surgeon and cardiologist. From the blood pool model the clinicians were able to determine that the position of the coronary arteries meant an arterial switch operation was unlikely to be feasible. The soft myocardium model allowed the clinicians to assess the VSD anatomy and relationship with the aorta. The models, therefore, were of benefit in the development of the surgical plan. It was felt that the clinical situation was stable enough that an immediate intervention was not required, but the timing of any intervention would be dictated by decreasing oxygen saturation. Subsequently, the oxygen saturation of the patient did decrease and the decision was made to intervene. A further model was created to demonstrate the tricuspid apparatus. An arterial switch was ultimately performed without the LeCompte maneuver, the muscular VSD enlarged and baffled into the neo aortic root and the perimembranous VSD closed. At 1 month follow up SO₂ was 100%, there was no breathlessness and no echocardiogram changes.

3D-Printed Models for Surgical Planning in Complex Congenital Heart Diseases: A Systematic Review

Background: 3D technology support is an emerging technology in the field of congenital heart diseases (CHD). The goals of 3D printings or models is mainly a better analysis of complex anatomies to optimize the surgical repair or intervention planning. Method: We performed a systematic review to evaluate the accuracy and reliability of CHD modelization and 3D printing, as well as the proof of concept of the benefit of 3D printing in planning interventions. Results: Correlation studies showed good results with anatomical measurements. This technique can therefore be considered reliable with the limit of the operator's subjectivity in modelizing the defect. In cases series, the benefits of the 3D technology have been shown for describing the vessels anatomy and guiding the surgical approach. For intra-cardiac complex anatomy, 3D models have been shown helpful for the planification of intracardiac repair. However, there is still lack of evidence based approach for the usefulness of 3D models in CHD in changing outcomes after surgery or interventional procedures due to the difficulty to design a prospective study with comprehensive and clinically meaningful end-points. Conclusion: 3D technology can be used to improve the understanding of anatomy of complex CHD and to guide surgical strategy. However, there is a need to design clinical studies to identify the place of this approach in the current clinical practice.

Current and future applications of 3D printing in congenital cardiology and cardiac surgery

Three-dimensional (3D) printing technology in congenital cardiology and cardiac surgery has experienced a rapid development over the last decade. In presence of complex cardiac and extra-cardiac anatomies, the creation of a physical, patient-specific model is attractive to most clinicians. However, at the present time, there is still a lack of strong scientific evidence of the benefit of 3D models in clinical practice and only qualitative evaluation of the models has been used to investigate their clinical use. 3D models can be printed in rigid or flexible materials, and the original size can be augmented depending on the application the models are needed for. The most common applications of 3D models at present include procedural planning of complex surgical or interventional cases, in vitro simulation for research purposes, training and communication with patients and families. The aim of this pictorial review is to describe the basic principles of this technology and present its current and future applications.