Evaluation of nano spray drying as a method for drying and formulation of therapeutic peptides and proteins

Nanomedicines via the pulmonary route: a promising strategy to reach the target?

Over the past decades, research on nanomedicines as innovative tools in combating complex pathologies has increased tenfold, spanning fields from infectiology and ophthalmology to oncology. This process has further accelerated since the introduction of SARS-CoV-2 vaccines. When it comes to human health, nano-objects are designed to protect, transport, and improve the solubility of compounds to allow the delivery of active ingredients on their targets. Nanomedicines can be administered by different routes, such as intravenous, oral, intramuscular, or pulmonary routes. In the latter route, nanomedicines can be aerosolized or nebulized to reach the deep lung. This review summarizes existing nanomedicines proposed for inhalation administration, from their synthesis to their potential clinical use. It also outlines the respiratory organs, their structure, and particularities, with a specific emphasis on how these factors impact the administration of nanomedicines. Furthermore, the review addresses the organs accessible through pulmonary administration, along with various pathologies such as infections, genetic diseases, or cancer that can be addressed through inhaled nanotherapeutics. Finally, it examines the existing devices suitable for the aerosolization of nanomedicines and the range of nanomedicines in clinical development.

Spray-Dried Nanolipid Powders for Pulmonary Drug Delivery: A Comprehensive Mini Review

Lung diseases have received great attention in the past years because they contribute approximately one-third of the total global mortality. Pulmonary drug delivery is regarded as one of the most appealing routes to treat lung diseases. It addresses numerous drawbacks linked to traditional dosage forms. It presents notable features, such as, for example, a non-invasive route, localized lung drug delivery, low enzymatic activity, low drug degradation, higher patient compliance, and avoiding first-pass metabolism. Therefore, the pulmonary route is commonly explored for delivering drugs both locally and systemically. Inhalable nanocarrier powders, especially, lipid nanoparticle formulations, including solid-lipid and nanostructured-lipid nanocarriers, are attracting considerable interest in addressing respiratory diseases thanks to their significant advantages, including deep lung deposition, biocompatibility, biodegradability, mucoadhesion, and controlled drug released. Spray drying is a scalable, fast, and commercially viable technique to produce nanolipid powders. This review highlights the ideal criteria for inhalable spray-dried SLN and NLC powders for the pulmonary administration route. Additionally, the most promising inhalation devices, known as dry powder inhalers (DPIs) for the pulmonary delivery of nanolipid powder-based medications, and pulmonary applications of SLN and NLC powders for treating chronic lung conditions, are considered.

Selection of Excipients for the Preparation of Vancomycin-Loaded Poly(D,L-lactide-co-glycolide) Microparticles with Extended Release by Emulsion Spray Drying

The aim of this study was to relate the composition of the W/O emulsion used as a starting fluid in the spray-drying process to the quality of the dry polymer particles obtained in terms of physical-chemical properties, compatibility and drug release performance. Four W/O emulsions containing vancomycin hydrochloride (VAN), an encapsulating PLGA polymer and Poloxamer® 407, chitosan and/or sorbitan monooleate as stabilisers were spray-dried using an ultrasonic atomising nozzle. The microparticles obtained were micron-sized, with a volume mean diameter between 43.2 ± 0.3 and 64.0 ± 12.6 µm, and spherical with a mostly smooth, non-porous surface and with high drug loading (between 14.5 ± 0.6 and 17.1 ± 1.9% w/w). All formulations showed a prolonged and biphasic VAN release profile, with diffusion being the primary release mechanism. Microparticles prepared from the emulsions with Poloxamer® 407 and sorbitan monooleate released VAN rapidly and completely within one day. The release of VAN from microparticles prepared from the emulsion without additives or with chitosan in the inner aqueous phase was significantly decreased; after four days, a cumulative release of 65% and 61%, respectively, was achieved. Microparticles with encapsulated chitosan had the largest mean particle diameter and the slowest release of VAN.

Overcoming the yield challenge of mussel foot proteins: Enhancing adhesion through metal ion-incorporated nanoparticles

Mussel foot proteins (MFPs) hold tremendous potential for various fields, but their low natural production yield presents a significant challenge for practical use. This study aims to explore possible solutions to overcome this limitation. While advanced recombinant technology can improve production efficiency, the resulting proteins lack the crucial chemical signature of mussel adhesion, 3,4-Dihydroxyphenylalanine (DOPA). Recent studies have shown that adhesives in nanoparticle form offer higher adhesion on solid surfaces, making them a promising alternative. Moreover, metal ions can enhance the cohesive forces between MFPs, leading to improved adhesion. In this study, we prepared MFP nanoparticles via spray-drying and tested their adhesion performance on surfaces with varying hydrophobicity using a universal testing machine. Our findings confirmed that MFP nanoparticles exhibit stronger adhesive performance than native MFPs, with metal ions contributing to even more robust adhesion. This study offers valuable insights into the adhesive behavior of MFPs in nanoparticle form with metal ions, presenting a potential solution to the challenge of low natural production yield of MFPs and the possibility of enhancing their adhesion properties in bio-adhesive materials.

Anti-cancer effect of nano-encapsulated boswellic acids, curcumin and naringenin against HepG-2 cell line

BACKGROUND

liver cancer is one of the most common cancers in the world. So far, there is no gold standard treatment for hepatocellular carcinoma. We conducted this in vitro study to assess the effect of three natural products: Boswellic acids, curcumin and naringin versus corresponding nanoparticles (NPs) on Hep G2 cells proliferation.

METHODS

Boswellic acid, curcumin, naringin-loaded NPs were prepared using nanoprecipitation method. Human liver (HepG2) cell line was cultured in Dulbecco's modified Eagle's medium (DMEM). The cell growth inhibition and cytotoxicity were evaluated by MTT assay.

RESULTS

Boswellic acid, curcumin, naringin were able to inhibit HepG2 cells proliferation. IC50 at 24 h, 48 h showed significant lower values in NPs versus Free herbs. IC50 values of free Boswellic acids and NPs at 24 h were (24.60 ± 1.89 and 7.78 ± 0.54, P < 0.001), at 48 h were (22.45 ± 1.13 and 5.58 ± 0.27, P < 0.001) respectively. IC50 values of free curcumin and NPs at 24 h were (5.89 ± 0.8 and 3.46 ± 0.23, P < 0.05), at 48 h were (5.57 ± 0.94 and 2.51 ± 0.11, P < 0.05), respectively. For free and naringenin NPs, IC50 values at 24 h were (14.57 ± 1.78 and 7.25 ± 0.17, P < 0.01), at 48 h were (11.37 ± 1.45 and 5.21 ± 0.18, P < 0.01) respectively.

CONCLUSION

Boswellic acid, curcumin, naringin and their nanoprecipitation prepared nanoparticles suppressed Hep G2 cells proliferation.

Identification of natural peptides from "PlantPepDB" database as anti-SARS-CoV-2 agents: A protein-protein docking approach

BACKGROUND

A global pandemic owing to COVID-19 infection has created havoc in the entire world. The etiological agent responsible for this viral outbreak is classified as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Still, there's no specific drug or preventive medication to treat SARS-CoV-2. This study was designed to demonstrate the efficacy of some anti-viral peptides obtained from a plant database i.e., PlantPepDB as potential ACE-2-Spike (S) protein complex neutralizers using a structure-based drug designing approach.

METHOD

A total of 83 anti-viral plant peptides were screened from a peptide database i.e. PlantPepDB based on their reported anti-viral activities against various viral strains. In order to screen peptides that may potentially interfere with ACE-2 and S complex formation, molecular docking studies were conducted using the flare module of Cresset software and subsequently, analysed the crucial interactions between the peptides and S complexes and ACE-2/S complex. Herein, the interactions and docking scores obtained for ACE-2/S complex were considered as references. The S-peptides complexes which displayed superior interactions and docking scores than reference complex i.e., ACE2-S were considered as final hits. The Molecular dynamics studies were conducted for a period of 30 ns for each of the final hit/S complex to understand the interaction stability and binding mechanism of designed peptides.

RESULTS

The molecular docking results revealed that five peptides including Cycloviolacin Y3, Cycloviolacin Y1, White cloud bean defensin, Putative defensin 3.1, and Defensin D1 showed superior docking scores (i.e. -1372.5 kJ/mol to -1232.6 kJ/mol) when docked at the ACE2 binding site of S-protein than score obtained for the complex of ACE-2 and S protein i.e. -1183.4 kJ/mol. Moreover, these top five peptides manifested key interactions required to prevent the binding of S protein with ACE2. The molecular dynamics simulation study revealed that two of these five peptides i.e. Cycloviolacin Y3 and Cycloviolacin Y1 displayed minimal RMSD fluctuations.

CONCLUSIONS

The current structure-based drug-designing approach shows the possible role of anti-viral plant peptides as potential molecules to be explored at the initial stage of viral pathogenesis.

Pathogen-derived peptides in drug targeting and its therapeutic approach

Peptides, short stretches of amino acids or small proteins that occupy a strategic position between proteins and amino acids, are readily accessible by chemical and biological methods. With ideal properties for forming high-affinity and specific interactions with host target proteins, they have established an important niche in the drug development spectrum complementing small molecule and biological therapeutics. Among the most successful biomedicines in use today, peptide-based drugs show great promise. This, coupled with recent advances in synthetic and nanochemical biology, has led to the creation of tailor-made peptide therapeutics for improved biocompatibility. This review presents an overview of the latest research on pathogen-derived, host-cell-interacting peptides. It also highlights strategies for using peptide-based therapeutics that address cellular transport challenges through the introduction of nanoparticles that serve as platforms to facilitate the delivery of peptide biologics and therapeutics for treating various inflammatory diseases. Finally, this paper describes future perspectives, specific pathogen-based peptides that can enhance specificity, efficiency, and capacity in functional peptide-based therapeutics, which are in the spotlight as new treatment alternatives for various diseases, and also presents verified sequences and targets that can increase chemical and pharmacological value.

Protein Nanoparticles: Uniting the Power of Proteins with Engineering Design Approaches

Protein nanoparticles, PNPs, have played a long-standing role in food and industrial applications. More recently, their potential in nanomedicine has been more widely pursued. This review summarizes recent trends related to the preparation, application, and chemical construction of nanoparticles that use proteins as major building blocks. A particular focus has been given to emerging trends related to applications in nanomedicine, an area of research where PNPs are poised for major breakthroughs as drug delivery carriers, particle-based therapeutics or for non-viral gene therapy.

Pectin microparticles for peptide delivery: Optimization of spray drying processing

Spray-dried pectin microparticles can potentially improve the oral bioavailability of peptides by virtue of their mucoadhesion. However, developing such formulations with desirable quality attributes is challenging due to the sensitivity of microparticle critical quality attributes towards changes in spray drying processing parameters. In this study, a central composite design approach was applied to investigate the influence of input temperature, aspirator rate, feed flow rate, polymer concentration and polymer feed weight on the yield and particle size of pectin microparticles prepared via spray drying. A mathematical model for the prediction of yield was statistically significant with good predictability. A maximum yield of 72.2% was achieved through optimizing the spray drying conditions. The particle size remained in a relatively narrow range (D50, 2.16-3.67 μm), and therefore was considered independent of the factors investigated. The model for yield prediction was further validated using octreotide acetate as a representative peptide. The presence of octreotide acetate in the pectin microparticles increased their surface roughness and decreased their melting enthalpy. In addition, it was determined that pectin with a high degree of esterification (72%, AU201) resulted in faster drug release compared to pectin with a lower degree of esterification (62%, CU401). Interestingly, the degree of esterification did not impact microparticle particle size, morphology or thermal properties. This study demonstrates the importance of DoE in optimization of the spray drying process for the development of pectin-based peptide microparticles. This is the first report using spray-dried pectin-based microparticles for octreotide delivery. The yield prediction model achieved using a central composite design may also be helpful for formulation development of similar drug products.

Collagen Nanoparticles in Drug Delivery Systems and Tissue Engineering

The versatile natural polymer, collagen, has gained vast attention in biomedicine. Due to its biocompatibility, biodegradability, weak antigenicity, biomimetics and well-known safety profile, it is widely used as a drug, protein and gene carrier, and as a scaffold matrix in tissue engineering. Nanoparticles develop favorable chemical and physical properties such as increased drug half-life, improved hydrophobic drug solubility and controlled and targeted drug release. Their reduced toxicity, controllable characteristics of scaffolds and stimuli-responsive behavior make them suitable in regenerative medicine and tissue engineering. Collagen associates and absorbs nanoparticles leading to significant impacts on their biological functioning in any biofluid. This review will discuss collagen nanoparticle preparation methods and their applications and developments in drug delivery systems and tissue engineering.

Design of Lamivudine Loaded Nanoparticles for Oral Application by Nano Spray Drying Method: A New Approach to use an Antiretroviral Drug for Lung Cancer Treatment

AIMS

To prepare lamivudine (LAM)-loaded-nanoparticles (NPs) that can be used in lung cancer treatment. To change the antiviral indication of LAM to anticancer.

BACKGROUND

The development of anticancer drugs is a difficult process. One approach to accelerate the availability of drugs is to reclassify drugs approved for other conditions as anticancer. The most common route of administration of anticancer drugs is intravenous injection. Oral administration of anticancer drugs may considerably change current treatment modalities of chemotherapy and improve the life quality of cancer patients. There is also a potentially significant economic advantage.

OBJECTIVE

To characterize the LAM-loaded-NPs and examine the anticancer activity.

METHODS

LAM-loaded-NPs were prepared using Nano Spray-Dryer. Properties of NPs were elucidated by particle size (PS), polydispersity index (PDI), zeta potential (ZP), SEM, encapsulation efficiency (EE%), dissolution, release kinetics, DSC and FT-IR. Then, the anticancer activity of all NPs was examined.

RESULTS

The PS values of the LAM-loaded-NPs were between 373 and 486 nm. All NPs prepared have spherical structure and positive ZP. EE% was in a range of 61-79%. NPs showed prolonged release and the release kinetics fitted to the Weibull model. NPs structures were clarified by DSC and FT-IR analysis. The results showed that the properties of NPs were directly related to the drug:polymer ratio of feed solution. NPs have potential anticancer properties against A549 cell line at low concentrations and non-toxic to CCD 19-Lu cell line.

CONCLUSION

NPs have potential anticancer properties against human lung adenocarcinoma cells and may induce cell death effectively and be a potent modality to treat this type of cancer. These experiments also indicate that our formulations are non-toxic to normal cells. It is clear that this study would bring a new perspective to cancer therapy.

Spray-Dried Inhalable Powder Formulations of Therapeutic Proteins and Peptides

Respiratory diseases are among the leading causes of morbidity and mortality worldwide. Innovations in biochemical engineering and understanding of the pathophysiology of respiratory diseases resulted in the development of many therapeutic proteins and peptide drugs with high specificity and potency. Currently, protein and peptide drugs are mostly administered by injections due to their large molecular size, poor oral absorption, and labile physicochemical properties. However, parenteral administration has several limitations such as frequent dosing due to the short half-life of protein and peptide in blood, pain on administration, sterility requirement, and poor patient compliance. Among various noninvasive routes of administrations, the pulmonary route has received a great deal of attention and is a better alternative to deliver protein and peptide drugs for treating respiratory diseases and systemic diseases. Among the various aerosol dosage forms, dry powder inhaler (DPI) systems appear to be promising for inhalation delivery of proteins and peptides due to their improved stability in solid state. This review focuses on the development of DPI formulations of protein and peptide drugs using advanced spray drying. An overview of the challenges in maintaining protein stability during the drying process and stabilizing excipients used in spray drying of proteins and peptide drugs is discussed. Finally, a summary of spray-dried DPI formulations of protein and peptide drugs, their characterization, various DPI devices used to deliver protein and peptide drugs, and current clinical status are discussed.

The Uniqueness of Albumin as a Carrier in Nanodrug Delivery

Albumin is an appealing carrier in nanomedicine because of its unique features. First, it is the most abundant protein in plasma, endowing high biocompatibility, biodegradability, nonimmunogenicity, and safety for its clinical application. Second, albumin chemical structure and conformation allows interaction with many different drugs, potentially protecting them from elimination and metabolism in vivo, thus improving their pharmacokinetic properties. Finally, albumin can interact with receptors overexpressed in many diseased tissues and cells, providing a unique feature for active targeting of the disease site without the addition of specific ligands to the nanocarrier. For this reason, albumin, characterized by an extended serum half-life of around 19 days, has the potential of promoting half-life extension and targeted delivery of drugs. Therefore, this article focuses on the importance of albumin as a nanodrug delivery carrier for hydrophobic drugs, taking advantage of the passive as well as active targeting potential of this nanocarrier. Particular attention is paid to the breakthrough NAB-Technology, with emphasis on the advantages of Nab-Paclitaxel (Abraxane), compared to the solvent-based formulations of Paclitaxel, i.e., CrEL-paclitaxel (Taxol) in a clinical setting. Finally, the role of albumin in carrying anticancer compounds is depicted, with a particular focus on the albumin-based formulations that are currently undergoing clinical trials. The article sheds light on the power of an endogenous substance, such as albumin, as a drug delivery system, signifies the importance of the drug vehicle in drug performance in the biological systems, and highlights the possible future trends in the use of this drug delivery system.

Polymeric nanoencapsulation of zaleplon into PLGA nanoparticles for enhanced pharmacokinetics and pharmacological activity

Zaleplon (ZP) is a sedative and hypnotic drug used for the treatment of insomnia. Despite its potent anticonvulsant activity, ZP is not commonly used for the treatment of convulsion since ZP is characterized by its low oral bioavailability as a result of poor solubility and extensive liver metabolism. The following study aimed to formulate specifically controlled release nano-vehicles for oral and parenteral delivery of ZP to enhance its oral bioavailability and biological activity. A modified single emulsification-solvent evaporation method of sonication force was adopted to optimize the inclusion of ZP into biodegradable nanoparticles (NPs) using poly (dl-lactic-co-glycolic acid) (PLGA). The impacts of various formulation variables on the physicochemical characteristics of the ZP-PLGA-NPs and drug release profiles were investigated. Pharmacokinetics and pharmacological activity of ZP-PLGA-NPs were studied using experimental animals and were compared with generic ZP tablets. Assessment of gamma-aminobutyric acid (GABA) level in plasma after oral administration was conducted using enzyme-linked immunosorbent assay. The maximal electroshock-induced seizures model evaluated anticonvulsant activity after the parenteral administration of ZP-loaded NPs. The prepared ZP-PLGA NPs were negatively charged spherical particles with an average size of 120-300 nm. Optimized ZP-PLGA NPs showed higher plasma GABA levels, longer sedative, hypnotic effects, and a 3.42-fold augmentation in oral drug bioavailability in comparison to ZP-marketed products. Moreover, parenteral administration of ZP-NPs showed higher anticonvulsant activity compared to free drug. Oral administration of ZP-PLGA NPs achieved a significant improvement in the drug bioavailability, and parenteral administration showed a pronounced anticonvulsant activity.

An Overview on Spray-Drying of Protein-Loaded Polymeric Nanoparticles for Dry Powder Inhalation

The delivery of therapeutic proteins remains a challenge, despite recent technological advances. While the delivery of proteins to the lungs is the gold standard for topical and systemic therapy through the lungs, the issue still exists. While pulmonary delivery is highly attractive due to its non-invasive nature, large surface area, possibility of topical and systemic administration, and rapid absorption circumventing the first-pass effect, the absorption of therapeutic proteins is still ineffective, largely due to the immunological and physicochemical barriers of the lungs. Most studies using spray-drying for the nanoencapsulation of drugs focus on the delivery of conventional drugs, which are less susceptible to bioactivity loss, compared to proteins. Herein, the development of polymeric nanoparticles by spray-drying for the delivery of therapeutic proteins is reviewed with an emphasis on its advantages and challenges, and the techniques to evaluate their in vitro and in vivo performance. The protein stability within the carrier and the features of the carrier are properly addressed.

Surface Disinfection to Protect against Microorganisms: Overview of Traditional Methods and Issues of Emergent Nanotechnologies

Sterilization methods for individuals and facilities are extremely important to enable human beings to continue the basic tasks of life and to enable safe and continuous interaction of citizens in society when outbreaks of viral pandemics such as the coronavirus. Sterilization methods, their availability in gatherings, and the efficiency of their work are among the important means to contain the spread of viruses and epidemics and enable societies to practice their activities almost naturally. Despite the effective solutions given by traditional methods of surface disinfection, modern nanotechnology has proven to be an emergent innovation to protect against viruses. On this note, recent scientific breakthroughs have highlighted the ability of nanospray technology to attach to air atoms in terms of size and time-period of existence as a sterilizer for renewed air in large areas for human gatherings. Despite the ability of this method to control the outbreak of infections, the mutation of bactericidal mechanisms presents a great issue for scientists. In recent years, science has explored a more performant approach and techniques based on a surface-resistance concept. The most emergent is the self-defensive antimicrobial known as the self-disinfection surface. It consists of the creation of a bacteria cell wall to resist the adhesion of bacteria or to kill bacteria by chemical or physical changes. Besides, plasma-mediated virus inactivation was shown as a clean, effective, and human healthy solution for surface disinfection. The purpose of this article is to deepen the discussion on the threat of traditional methods of surface disinfection and to assess the state of the art and potential solutions using emergent nanotechnology.

Respiratory Tract: Structure and Attractions for Drug Delivery Using Dry Powder Inhalers

Respiratory tract is one of the oldest routes for drug delivery. It can be used for local and systemic drug deliveries. Inhalation therapy has several advantages over oral. It delivers the drug efficiently to the lung with minimal systemic exposure, thus avoiding systemic side effects common with oral route. In this review, different types of inhaler devices are illustrated like metered dose inhalers (MDIs), dry powder inhalers (DPIs), nebulizers, and the new soft mist inhalers (SMIs). Since dry powder is more stable than when in liquid form, we will discuss in detail DPIs highlighting different techniques utilized in preparation of dry powders with or without carrier to improve flowability and drug delivery to deep lungs. Types of DPIs are briefly discussed with examples from the market. Several mechanisms for particle deposition are mentioned with factors governing the process. Pharmacokinetic profile of the inhaled particles is detailed starting from the dissolution, followed by the rapid absorption and ending with systemic clearance. New technologies like 3D printing in pulmonary field are also highlighted.

Protein-Based Nanoparticles as Drug Delivery Systems

Nanoparticles have been extensively used as carriers for the delivery of chemicals and biomolecular drugs, such as anticancer drugs and therapeutic proteins. Natural biomolecules, such as proteins, are an attractive alternative to synthetic polymers commonly used in nanoparticle formulation because of their safety. In general, protein nanoparticles offer many advantages, such as biocompatibility and biodegradability. Moreover, the preparation of protein nanoparticles and the corresponding encapsulation process involved mild conditions without the use of toxic chemicals or organic solvents. Protein nanoparticles can be generated using proteins, such as fibroins, albumin, gelatin, gliadine, legumin, 30Kc19, lipoprotein, and ferritin proteins, and are prepared through emulsion, electrospray, and desolvation methods. This review introduces the proteins used and methods used in generating protein nanoparticles and compares the corresponding advantages and disadvantages of each.

Design, Formulation and in vivo Evaluation of Novel Honokiol-Loaded PEGylated PLGA Nanocapsules for Treatment of Breast Cancer

Background

Honokiol (HK) is a common herbal medicine extracted from magnolia plants. Low aqueous solubility and limited bioavailability of HK have hindered its clinical application, especially for cancer treatment. Nano-drug delivery system has the potential to enhance HK delivery and therefore, enhance its anti-cancer activity.

Purpose

The study’s aim is to design novel PEGylated-PLGA polymeric nanocapsules (NCs) for HK delivery to breast tumor-bearing mice after systemic administration.

Methods

Formulation of different HK-loaded NCs and their physio-chemical characterization were optimized through the use of different formulation variables. The antitumor activity of the HK-loaded NCs was investigated both in vitro using MCF-7 and EAC breast cancer cell lines and in vivo using solid Ehrlich carcinoma (SEC) breast cancer model.

Results

The optimum HK-loaded NCs were prepared from 15% PEG-PLGA diblock copolymer and exhibited the lowest nano size of 125 nm, smooth spherical morphology, highest drug loading of 94% and highest cellular uptake into breast cancer cells. HK-loaded PEGylated NCs can effectively inhibit the in vitro cell growth of breast cancer cells by 80.2% and 58.1% compared to 35% and 31% with free HK in the case of MCF-7 and EAC, respectively. HK-loaded NCs inhibited SEC tumor growth by 2.3 fold significantly higher than free HK, in vivo.

Conclusion

The designed drug delivery system encapsulating HK exhibited a pronounced decrease in tumor growth biomarkers meanwhile proved its safety in animals. Therefore, 15% PEGylated HK-loaded NCs may act as a promising new approach for breast cancer treatment.

Harnessing Dendritic Cells for Poly (D,L-lactide-co-glycolide) Microspheres (PLGA MS)-Mediated Anti-tumor Therapy

With emerging success in fighting off cancer, chronic infections, and autoimmune diseases, immunotherapy has become a promising therapeutic approach compared to conventional therapies such as surgery, chemotherapy, radiation therapy, or immunosuppressive medication. Despite the advancement of monoclonal antibody therapy against immune checkpoints, the development of safe and efficient cancer vaccine formulations still remains a pressing medical need. Anti-tumor immunotherapy requires the induction of antigen-specific CD8+ cytotoxic T lymphocyte (CTL) responses which recognize and specifically destroy tumor cells. Due to the crucial role of dendritic cells (DCs) in initiating anti-tumor immunity, targeting tumor antigens to DCs has become auspicious in modern vaccine research. Over the last two decades, micron- or nanometer-sized particulate delivery systems encapsulating tumor antigens and immunostimulatory molecules into biodegradable polymers have shown great promise for the induction of potent, specific and long-lasting anti-tumor responses in vivo. Enhanced vaccine efficiency of the polymeric micro/nanoparticles has been attributed to controlled and continuous release of encapsulated antigens, efficient targeting of antigen presenting cells (APCs) such as DCs and subsequent induction of CTL immunity. Poly (D, L-lactide-co-glycolide) (PLGA), as one of these polymers, has been extensively studied for the design and development of particulate antigen delivery systems in cancer therapy. This review provides an overview of the current state of research on the application of PLGA microspheres (PLGA MS) as anti-tumor cancer vaccines in activating and potentiating immune responses attempting to highlight their potential in the development of cancer therapeutics.

Novel Ran-RCC1 Inhibitory Peptide-Loaded Nanoparticles Have Anti-Cancer Efficacy In Vitro and In Vivo

The delivery of anticancer agents to their subcellular sites of action is a significant challenge for effective cancer therapy. Peptides, which are integral to several oncogenic pathways, have significant potential to be utilised as cancer therapeutics due to their selectivity, high potency and lack of normal cell toxicity. Novel Ras protein-Regulator of chromosome condensation 1 (Ran-RCC1) inhibitory peptides designed to interact with Ran, a novel therapeutic target in breast cancer, were delivered by entrapment into polyethylene glycol-poly (lactic-co-glycolic acid) PEG-PLGA polymeric nanoparticles (NPs). A modified double emulsion solvent evaporation technique was used to optimise the physicochemical properties of these peptide-loaded biodegradable NPs. The anti-cancer activity of peptide-loaded NPs was studied in vitro using Ran-expressing metastatic breast (MDA-MB-231) and lung cancer (A549) cell lines, and in vivo using Solid Ehrlich Carcinoma-bearing mice. The anti-metastatic activity of peptide-loaded NPs was investigated using migration, invasion and colony formation assays in vitro. A PEG-PLGA-nanoparticle encapsulating N-terminal peptide showed a pronounced antitumor and anti-metastatic action in lung and breast cancer cells in vitro and caused a significant reduction of tumor volume and associated tumor growth inhibition of breast cancer model in vivo. These findings suggest that the novel inhibitory peptides encapsulated into PEGylated PLGA NPs are delivered effectively to interact and deactivate Ran. This novel Ran-targeting peptide construct shows significant potential for therapy of breast cancer and other cancers mediated by Ran overexpression.

Drying technology strategies for colon-targeted oral delivery of biopharmaceuticals

In chronic intestinal diseases like inflammatory bowel disease, parenteral administration of biopharmaceuticals is associated with numerous disadvantages including immune reactions, infections, low patient compliance, and toxicity caused by high systemic bioavailability. One alternative that can potentially overcome these limitations is oral administration of biopharmaceuticals, where the local delivery will reduce the systemic exposure and furthermore the manufacturing costs will be lower. However, the development of oral dosage forms that deliver the biologically active form to the intestines is one of the greatest challenges for pharmaceutical technologists due to the sensitive nature of biopharmaceuticals. The present article discusses the various drug delivery technologies used to produce orally administered solid dosage forms of biopharmaceuticals with an emphasis on colon-targeted delivery. Solid oral dosage compositions containing different types of colon-targeting biopharmaceuticals are compiled followed by a review of currently applied and emerging drying technologies for biopharmaceuticals. The different drying technologies are compared in terms of their advantages, limitations, costs and their effect on product stability.

Design, Characterization, and Biopharmaceutical Behavior of Nanoparticles Loaded with an HIV-1 Fusion Inhibitor Peptide

New therapeutic alternatives to fight against the spread of HIV-1 are based on peptides designed to inhibit the early steps of HIV-1 fusion in target cells. However, drawbacks, such as bioavailability, short half-life, rapid clearance, and poor ability to cross the physiological barriers, make such peptides unattractive for the pharmaceutical industry. Here we developed, optimized, and characterized polymeric nanoparticles (NPs) coated with glycol chitosan to incorporate and release an HIV-1 fusion inhibitor peptide (E1) inside the vaginal mucosa. The NPs were prepared by a modified double emulsion method, and optimization was carried out by a factorial design. In vitro, ex vivo, and in vivo studies were carried out to evaluate the optimized formulation. The results indicate that the physicochemical features of these NPs enable them to incorporate and release HIV fusion inhibitor peptides to the vaginal mucosa before the fusion step takes place.

Protein Polymer-Based Nanoparticles: Fabrication and Medical Applications

Nanoparticles are particles that range in size from about 1⁻1000 nanometers in diameter, about one thousand times smaller than the average cell in a human body. Their small size, flexible fabrication, and high surface-area-to-volume ratio make them ideal systems for drug delivery. Nanoparticles can be made from a variety of materials including metals, polysaccharides, and proteins. Biological protein-based nanoparticles such as silk, keratin, collagen, elastin, corn zein, and soy protein-based nanoparticles are advantageous in having biodegradability, bioavailability, and relatively low cost. Many protein nanoparticles are easy to process and can be modified to achieve desired specifications such as size, morphology, and weight. Protein nanoparticles are used in a variety of settings and are replacing many materials that are not biocompatible and have a negative impact on the environment. Here we attempt to review the literature pertaining to protein-based nanoparticles with a focus on their application in drug delivery and biomedical fields. Additional detail on governing nanoparticle parameters, specific protein nanoparticle applications, and fabrication methods are also provided.

Electrohydrodynamic atomization and spray-drying for the production of pure drug nanocrystals and co-crystals

In recent years, nanotechnology has offered attractive opportunities to overcome the (bio)pharmaceutical drawbacks of most drugs such as low aqueous solubility and bioavailability. Among the numerous methodologies that have been applied to improve drug performance, a special emphasis has been made on those that increase the dissolution rate and the saturation solubility by the reduction of the particle size of pure drugs to the nanoscale and the associated increase of the specific surface area. Different top-down and bottom-up methods have been implemented, each one with its own pros and cons. Over the last years, the latter that rely on the dissolution of the drug in a proper solvent and its crystallization or co-crystallization by precipitation in an anti-solvent or, conversely, by solvent evaporation have gained remarkable impulse owing to the ability to adjust features such as size, size distribution, morphology and to control the amorphous/crystalline nature of the product. In this framework, electrohydrodynamic atomization (also called electrospraying) and spray-drying excel due to their simplicity and potential scalability. Moreover, they do not necessarily require suspension stabilizers and dry products are often produced during the formation of the nanoparticles what ensures physicochemical stability for longer times than liquid products. This review overviews the potential of these two technologies for the production of pure drug nanocrystals and co-crystals and discusses the recent technological advances and challenges for their implementation in pharmaceutical research and development.

Opportunity and challenges of nasal powders: Drug formulation and delivery

In the field of nasal drug delivery, among the preparations defined by the European Pharmacopoeia, nasal powders facilitate the formulation of poorly water-soluble active compounds. They often display a simple composition in excipients (if any), allow for the administration of larger drug doses and enhance drug diffusion and absorption across the mucosa, improving bioavailability compared to nasal liquids. Despite the positive features, however, nasal products in this form still struggle to enter the market: the few available on the market are Onzetra Xsail® (sumatriptan) for migraine relief and, for the treatment of rhinitis, Rhinocort® Turbuhaler® (budesonide), Teijin Rhinocort® (beclomethasone dipropionate) and Erizas® (dexamethasone cipecilate). Hence, this review tries to understand why nasal powder formulations are still less common than liquid ones by analyzing whether this depends on the lack of (i) real evidence of superior therapeutic benefit of powders, (ii) therapeutic and/or commercial interest, (iii) efficient manufacturing methods or (iv) availability of suitable and affordable delivery devices. To this purpose, the reader's attention will be guided through nasal powder formulation strategies and manufacturing techniques, eventually giving up-to-date evidences of therapeutic efficacy in vivo. Advancements in the technology of insufflation devices will also be provided as nasal drug products are typical drug-device combinations.

Nano-encapsulation of a novel anti-Ran-GTPase peptide for blockade of regulator of chromosome condensation 1 (RCC1) function in MDA-MB-231 breast cancer cells

Ran is a small ras-related GTPase and is highly expressed in aggressive breast carcinoma. Overexpression induces malignant transformation and drives metastatic growth. We have designed a novel series of anti-Ran-GTPase peptides, which prevents Ran hydrolysis and activation, and although they display effectiveness in silico, peptide activity is suboptimal in vitro due to reduced bioavailability and poor delivery. To overcome this drawback, we delivered an anti-Ran-GTPase peptide using encapsulation in PLGA-based nanoparticles (NP). Formulation variables within a double emulsion solvent evaporation technique were controlled to optimise physicochemical properties. NP were spherical and negatively charged with a mean diameter of 182-277nm. Peptide integrity and stability were maintained after encapsulation and release kinetics followed a sustained profile. We were interested in the relationship between cellular uptake and poly(ethylene glycol) (PEG) in the NP matrix, with results showing enhanced in vitro uptake with increasing PEG content. Peptide-loaded, pegylated (10% PEG)-PLGA NP induced significant cytotoxic and apoptotic effects in MDA-MB-231 breast cancer cells, with no evidence of similar effects in cells pulsed with free peptide. Western blot analysis showed that encapsulated peptide interfered with the proposed signal transduction pathway of the Ran gene. Our novel blockade peptide prevented Ran activation by blockage of regulator of chromosome condensation 1 (RCC1) following peptide release directly in the cytoplasm once endocytosis of the peptide-loaded nanoparticle has occurred. RCC1 blockage was effective only when a nanoparticulate delivery approach was adopted.