Passive Muscle-Tendon Unit Gearing Is Joint Dependent in Human Medial Gastrocnemius

Regional variation in lateral and medial gastrocnemius muscle fibre lengths obtained from diffusion tensor imaging

Assessment of regional muscle architecture is primarily done through the study of animals, human cadavers, or using b-mode ultrasound imaging. However, there remain several limitations to how well such measurements represent in vivo human whole muscle architecture. In this study, we developed an approach using diffusion tensor imaging and magnetic resonance imaging to quantify muscle fibre lengths in different muscle regions along a muscle's length and width. We first tested the between-day reliability of regional measurements of fibre lengths in the medial (MG) and lateral gastrocnemius (LG) and found good reliability for these measurements (intraclass correlation coefficient [ICC] = 0.79 and ICC = 0.84, respectively). We then applied this approach to a group of 32 participants including males (n = 18), females (n = 14), young (24 ± 4 years) and older (70 ± 2 years) adults. We assessed the differences in regional muscle fibre lengths between different muscle regions and between individuals. Additionally, we compared regional muscle fibre lengths between sexes, age groups, and muscles. We found substantial variability in fibre lengths between different regions within the same muscle and between the MG and the LG across individuals. At the group level, we found no difference in mean muscle fibre length between males and females, nor between young and older adults, or between the MG and the LG. The high variability in muscle fibre lengths between different regions within the same muscle, possibly expands the functional versatility of the muscle for different task requirements. The high variability between individuals supports the use of subject-specific measurements of muscle fibre lengths when evaluating muscle function.

In vivo assessment of the passive stretching response of the bi-compartmental human semitendinosus muscle using shear wave elastography

The semitendinosus muscle contains distinct proximal and distal compartments arranged anatomically in-series but separated by a tendinous inscription, with each compartment innervated by separate nerve branches. Although extensively investigated in other mammals, compartment-specific mechanical properties within the human semitendinosus have scarcely been assessed in vivo. Experimental data obtained during muscle-tendon unit stretching (e.g., slack angle) can also be used to validate and/or improve musculoskeletal model estimates of semitendinosus muscle force. The purpose of this study was to investigate the passive stretching response of proximal and distal humans semitendinosus compartments to distal joint extension. Using two-dimensional shear wave elastography, we bilaterally obtained shear moduli of both semitendinosus compartments from 14 prone-positioned individuals at ten knee flexion angles (from 90° to 0° [full extension] at 10° intervals). Passive muscle mechanical characteristics (slack angle, slack shear modulus, and the slope of the increase in shear modulus) were determined for each semitendinosus compartment by fitting a piecewise exponential model to the shear modulus-joint angle curves. We found no differences between compartments or legs for slack angle, slack shear modulus, or the slope of the increase in shear modulus. We also found the experimentally determined slack angle occurred at ~15-80° higher knee flexion angles compared to estimates from two commonly used musculoskeletal models, depending on participant and model used. Overall, these findings demonstrate that passive shear modulus-joint angle curves do not differ between proximal and distal human semitendinosus compartments, and provide experimental data to improve semitendinosus force estimates derived from musculoskeletal models.

Quantity versus quality: Age-related differences in muscle volume, intramuscular fat, and mechanical properties in the triceps surae

With aging comes reductions in the quality and size of skeletal muscle. These changes influence the force-generating capacity of skeletal muscle and contribute to movement deficits that accompany aging. Although declines in strength remain a significant barrier to mobility in older adults, the association between age-related changes in muscle structure and function remain unresolved. In this study, we compared age-related differences in (i) muscle volume and architecture, (ii) the quantity and distribution of intramuscular fat, and (iii) muscle shear modulus (an index of stiffness) in the triceps surae in 21 younger (24.6 ± 4.3 years) and 15 older (70.4 ± 2.4 years) healthy adults. Additionally, we explored the relationship between muscle volume, architecture, intramuscular fat and ankle plantar flexion strength in young and older adults. Magnetic resonance imaging was used to determine muscle volume and intramuscular fat content. B-mode ultrasound was used to quantify muscle architecture, shear-wave elastography was used to measure shear modulus, and ankle strength was measured during maximal isometric plantar flexion contractions. We found that older adults displayed higher levels of intramuscular fat yet similar muscle volumes in the medial (MG) and lateral gastrocnemius (LG) and soleus, compared to younger adults. These age-related higher levels of intramuscular fat were associated with lower muscle shear modulus in the LG and MG. We also found that muscle physiological cross-sectional area (PCSA) that accounted for age-associated differences in intramuscular fat showed a modest increase in its association with ankle strength compared to PCSA that did not account for fat content. This highlights that skeletal muscle fat infiltration plays a role in age-related strength deficits, but does not fully explain the age-related loss in muscle strength, suggesting that other factors play a more significant role.

Suppressed quadriceps fascicle behavior is present in the surgical limbs of those with a history of ACL reconstruction

The balance of published data have largely focused on adaptations in muscle and fiber size after anterior cruciate ligament reconstruction (ACLR), failing to account for the dynamic changes in the behavior of the muscles' contractile elements that strongly contribute to force production. To better understand the sources of quadriceps dysfunction, the purpose of our research was to determine if alterations in fascicle behavior are present after ACLR. Unilateral ACLR individuals (9 m/9f; 21 ± 3 yrs; 1.74 ± 0.12 m;71.58 ± 13.31 kg; months from surgery:38 ± 36) and healthy controls (3 m/6f; 23 ± 2 yrs; 1.67 ± 0.10 m; 63.51 ± 10.11 kg) participated. In-vivo vastus lateralis fascicle behavior was recorded using ultrasonography during three maximal isokinetic knee extensions (60°·s^-1). Fascicle length, angle, and shortening velocity were calculated and analyzed from rest to peak torque. Peak knee extension torque was averaged between isokinetic trials (Nm·kg^-1). Group by limb interactions were assessed using separate two-way analyses of variance and were further evaluated by comparing 95% confidence intervals where appropriate. Significant interactions were present for fascicle angle at peak torque (P = 0.01), fascicle length excursion (P = 0.05), fascicle angle excursion (P < 0.01), fascicle shortening velocity (P = 0.05) and strength (P = 0.03). Upon post-hoc evaluation, the surgical limb displayed altered in-vivo fascicle behavior compared to all limbs (P < 0.05) and reduced strength compared to the contralateral and right control limbs (P < 0.05). No other significant interactions were present (P > 0.05). Our data show that those with a history of ACLR have fascicles that are slower, lengthen less and operate with lower angles relative to the axis of force production. Altered fascicle behavior after ACLR may be an important underlying factor to explaining the protracted quadriceps dysfunction.

A Horse of a Different Color?: Tensile Strength and Elasticity of Sloth Flexor Tendons

Tendons must be able to withstand the tensile forces generated by muscles to provide support while avoiding failure. The properties of tendons in mammal limbs must therefore be appropriate to accommodate a range of locomotor habits and posture. Tendon collagen composition provides resistance to loading that contributes to tissue strength which could, however, be modified to not exclusively confer large strength and stiffness for elastic energy storage/recovery. For example, sloths are nearly obligate suspenders and cannot run, and due to their combined low metabolic rate, body temperature, and rate of digestion, they have an extreme need to conserve energy. It is possible that sloths have a tendon "suspensory apparatus" functionally analogous to that in upright ungulates, thus allowing for largely passive support of their body weight below-branch, while concurrently minimizing muscle contractile energy expenditure. The digital flexor tendons from the fore- and hindlimbs of two-toed (Choloepus hoffmanni) and three-toed (Bradypus variegatus) sloths were loaded in tension until failure to test this hypothesis. Overall, tensile strength and elastic (Young's) modulus of sloth tendons were low, and these material properties were remarkably similar to those of equine suspensory "ligaments." The results also help explain previous findings in sloths showing relatively low levels of muscle activation in the digital flexors during postural suspension and suspensory walking.

The Effect of Multidirectional Loading on Contractions of the M. Medial Gastrocnemius

Research has shown that compression of muscle can lead to a change in muscle force. Most studies show compression to lead to a reduction in muscle force, although recent research has shown that increases are also possible. Based on methodological differences in the loading design between studies, it seems that muscle length and the direction of transverse loading influence the effect of muscle compression on force production. Thus, in our current study we implement these two factors to influence the effects of muscle loading. In contrast to long resting length of the medial gastrocnemius (MG) in most studies, we use a shorter MG resting length by having participant seated with their knees at a 90° angle. Where previous studies have used unidirectional loads to compress the MG, in this study we applied a multidirectional load using a sling setup. Multidirectional loading using a sling setup has been shown to cause muscle force reductions in previous research. As a result of our choices in experimental design we observed changes in the effects of muscle loading compared to previous research. In the present study we observed no changes in muscle force due to muscle loading. Muscle thickness and pennation angle showed minor but significant increases during contraction. However, no significant changes occurred between unloaded and loaded trials. Fascicle thickness and length showed different patterns of change compared to previous research. We show that muscle loading does not result in force reduction in all situations and is possibly linked to differences in muscle architecture and muscle length.

Loss of variable fascicle gearing during voluntary isometric contractions of paretic medial gastrocnemius muscles in male chronic stroke survivors

KEY POINTS

Maximum fascicle shortening/rotation was significantly decreased in paretic medial gastrocnemius (MG) muscles compared to non-paretic MG muscles. The fascicle gear ratio on both sides decreased as the ankle became dorsiflexed, but the slope of the fascicle gear ratio over ankle joint angle was significantly lower on the paretic side. The side-to-side slope difference was strongly correlated with the relative maximum joint torque and with the relative shear wave speed, suggesting that variable gearing may explain muscle weakness after stroke.

ABSTRACT

The present study aimed to understand variable fascicle gearing during voluntary isometric contractions of the medial gastrocnemius (MG) muscle in chronic stroke survivors. Using ultrasonography, we characterized fascicle behaviour on both paretic and non-paretic sides during plantarflexion contractions at different intensities and at different ankle joint angles. Shear wave speed was also recorded from the MG muscle belly under passive conditions. Fascicle gear ratios were then calculated as the ratio of muscle belly shortening velocity to fascicle shortening velocity, and variable fascicle gearing was quantified from the slope of gear ratio vs. joint angle relations. This slope was used to establish associations with maximum joint torques and with shear wave speeds. At all measured angles, we found a significant reduction in both maximum fascicle shortening and maximum fascicle rotation on the paretic side compared to the non-paretic side on our stroke survivor cohort. The fascicle rotation per fascicle shortening on the paretic side was also significantly smaller than on the non-paretic side, especially at plantarflexed positions. Furthermore, the fascicle gear ratio on both sides decreased as the ankle became dorsiflexed, but the change in the fascicle gear ratio was significantly lower on the paretic side. The side-to-side difference in the gear ratio slope was also strongly correlated with the relative maximum joint torque and with the relative shear wave speed, suggesting that variable gearing may explain muscle weakness after stroke. Further studies are needed to investigate how muscular changes after stroke may impede variable gearing and adversely impact muscle performance.

The Energy of Muscle Contraction. I. Tissue Force and Deformation During Fixed-End Contractions

During contraction the energy of muscle tissue increases due to energy from the hydrolysis of ATP. This energy is distributed across the tissue as strain-energy potentials in the contractile elements, strain-energy potential from the 3D deformation of the base-material tissue (containing cellular and extracellular matrix effects), energy related to changes in the muscle's nearly incompressible volume and external work done at the muscle surface. Thus, energy is redistributed through the muscle's tissue as it contracts, with only a component of this energy being used to do mechanical work and develop forces in the muscle's longitudinal direction. Understanding how the strain-energy potentials are redistributed through the muscle tissue will help enlighten why the mechanical performance of whole muscle in its longitudinal direction does not match the performance that would be expected from the contractile elements alone. Here we demonstrate these physical effects using a 3D muscle model based on the finite element method. The tissue deformations within contracting muscle are large, and so the mechanics of contraction were explained using the principles of continuum mechanics for large deformations. We present simulations of a contracting medial gastrocnemius muscle, showing tissue deformations that mirror observations from magnetic resonance imaging. This paper tracks the redistribution of strain-energy potentials through the muscle tissue during fixed-end contractions, and shows how fibre shortening, pennation angle, transverse bulging and anisotropy in the stress and strain of the muscle tissue are all related to the interaction between the material properties of the muscle and the action of the contractile elements.

Ultrasound imaging to assess skeletal muscle architecture during movements: a systematic review of methods, reliability, and challenges

B-mode ultrasound is often used to quantify muscle architecture during movements. Our objectives were to 1) systematically review the reliability of fascicle length (FL) and pennation angles (PA) measured using ultrasound during movements involving voluntary contractions; 2) systematically review the methods used in studies reporting reliability, discuss associated challenges, and provide recommendations to improve the reliability and validity of dynamic ultrasound measurements; and 3) provide an overview of computational approaches for quantifying fascicle architecture, their validity, agreement with manual quantification of fascicle architecture, and advantages and drawbacks. Three databases were searched until June 2019. Studies among healthy human individuals aged 17-85 yr that investigated the reliability of FL or PA in lower-extremity muscles during isoinertial movements and that were written in English were included. Thirty studies (n = 340 participants) were included for reliability analyses. Between-session reliability as measured by coefficient of multiple correlations (CMC), and coefficient of variation (CV) was FL CMC: 0.89-0.96; CV: 8.3% and PA CMC: 0.87-0.90; CV: 4.5-9.6%. Within-session reliability was FL CMC: 0.82-0.99; CV: 0.0-6.7% and PA CMC: 0.91; CV: 0.0-15.0%. Manual analysis reliability was FL CMC: 0.89-0.96; CV: 0.0-15.9%; PA CMC: 0.84-0.90; and CV: 2.0-9.8%. Computational analysis FL CMC was 0.82-0.99, and PA CV was 14.0-15.0%. Eighteen computational approaches were identified, and these generally showed high agreement with manual analysis and high validity compared with phantoms or synthetic images. B-mode ultrasound is a reliable method to quantify fascicle architecture during movement. Additionally, computational approaches can provide a reliable and valid estimation of fascicle architecture.

Ultrasound-derived changes in thickness of human ankle plantar flexor muscles during walking and running are not homogeneous along the muscle mid-belly region

Skeletal muscle thickness is a valuable indicator of several aspects of a muscle’s functional capabilities. We used computational analysis of ultrasound images, recorded from 10 humans walking and running at a range of speeds (0.7–5.0 m s⁻¹), to quantify interactions in thickness change between three ankle plantar flexor muscles (soleus, medial and lateral gastrocnemius) and quantify thickness changes at multiple muscle sites within each image. Statistical analysis of thickness change as a function of stride cycle (1d statistical parametric mapping) revealed significant differences between soleus and both gastrocnemii across the whole stride cycle as they bulged within the shared anatomical space. Within each muscle, changes in thickness differed between measurement sites but not locomotor condition. For some of the stride, thickness measures taken from the distal-mid image region represented the mean muscle thickness, which may therefore be a reliable region for these measures. Assumptions that muscle thickness is constant during a task, often made in musculoskeletal models, do not hold for the muscles and locomotor conditions studied here and researchers should not assume that a single thickness measure, from one point of the stride cycle or a static image, represents muscle thickness during dynamic movements.