Estimation of Nitrogen Nutrition Status in Winter Wheat From Unmanned Aerial Vehicle Based Multi-Angular Multispectral Imagery

Retrieving rice (Oryza sativa L.) net photosynthetic rate from UAV multispectral images based on machine learning methods

Photosynthesis is the key physiological activity in the process of crop growth and plays an irreplaceable role in carbon assimilation and yield formation. This study extracted rice (Oryza sativa L.) canopy reflectance based on the UAV multispectral images and analyzed the correlation between 25 vegetation indices (VIs), three textural indices (TIs), and net photosynthetic rate (Pn) at different growth stages. Linear regression (LR), support vector regression (SVR), gradient boosting decision tree (GBDT), random forest (RF), and multilayer perceptron neural network (MLP) models were employed for Pn estimation, and the modeling accuracy was compared under the input condition of VIs, VIs combined with TIs, and fusion of VIs and TIs with plant height (PH) and SPAD. The results showed that VIs and TIs generally had the relatively best correlation with Pn at the jointing-booting stage and the number of VIs with significant correlation (p< 0.05) was the largest. Therefore, the employed models could achieve the highest overall accuracy [coefficient of determination (R ²) of 0.383-0.938]. However, as the growth stage progressed, the correlation gradually weakened and resulted in accuracy decrease (R ² of 0.258-0.928 and 0.125-0.863 at the heading-flowering and ripening stages, respectively). Among the tested models, GBDT and RF models could attain the best performance based on only VIs input (with R ² ranging from 0.863 to 0.938 and from 0.815 to 0.872, respectively). Furthermore, the fusion input of VIs, TIs with PH, and SPAD could more effectively improve the model accuracy (R ² increased by 0.049-0.249, 0.063-0.470, and 0.113-0.471, respectively, for three growth stages) compared with the input combination of VIs and TIs (R ² increased by 0.015-0.090, 0.001-0.139, and 0.023-0.114). Therefore, the GBDT and RF model with fused input could be highly recommended for rice Pn estimation and the methods could also provide reference for Pn monitoring and further yield prediction at field scale.

Estimation Model of Potassium Content in Cotton Leaves Based on Wavelet Decomposition Spectra and Image Combination Features

Potassium (K) is one of the most important elements influencing cotton metabolism, quality, and yield. Due to the characteristics of strong fluidity and fast redistribution of the K in plants, it leads to rapid transformation of the K lack or abundance in plant leaves; therefore, rapid and accurate estimation of potassium content in leaves (LKC, %) is a necessary prerequisite to solve the regulation of plant potassium. In this study, we concentrated on the LKC of cotton in different growth stages, an estimation model based on the combined characteristics of wavelet decomposition spectra and image was proposed, and discussed the potential of different combined features in accurate estimation of the LKC. We collected hyperspectral imaging data of 60 main-stem leaves at the budding, flowering, and boll setting stages of cotton, respectively. The original spectrum (R) is decomposed by continuous wavelet transform (CWT). The competitive adaptive reweighted sampling (CARS) and random frog (RF) algorithms combined with partial least squares regression (PLSR) model were used to determine the optimal decomposition scale and characteristic wavelengths at three growth stages. Based on the best "CWT spectra" model, the grayscale image databases were constructed, and the image features were extracted by using color moment and gray level co-occurrence matrix (GLCM). The results showed that the best decomposition scales of the three growth stages were CWT-1, 3, and 9. The best growth stage for estimating LKC in cotton was the boll setting stage, with the feature combination of "CWT-9 spectra + texture," and its determination coefficients (R ²val) and root mean squared error (RMSEval) values were 0.90 and 0.20. Compared with the single R model (R ²val = 0.66, RMSEval = 0.34), the R ²val increased by 0.24. Different from our hypothesis, the combined feature based on "CWT spectra + color + texture" cannot significantly improve the estimation accuracy of the model, it means that the performance of the estimation model established with more feature information is not correspondingly better. Moreover, the texture features contributed more to the improvement of model performance than color features did. These results provide a reference for rapid and non-destructive monitoring of the LKC in cotton.

Sugarcane Nitrogen Concentration and Irrigation Level Prediction Based on UAV Multispectral Imagery

Sugarcane is the main industrial crop for sugar production, and its growth status is closely related to fertilizer, water, and light input. Unmanned aerial vehicle (UAV)-based multispectral imagery is widely used for high-throughput phenotyping, since it can rapidly predict crop vigor at field scale. This study focused on the potential of drone multispectral images in predicting canopy nitrogen concentration (CNC) and irrigation levels for sugarcane. An experiment was carried out in a sugarcane field with three irrigation levels and five fertilizer levels. Multispectral images at an altitude of 40 m were acquired during the elongating stage. Partial least square (PLS), backpropagation neural network (BPNN), and extreme learning machine (ELM) were adopted to establish CNC prediction models based on various combinations of band reflectance and vegetation indices. The simple ratio pigment index (SRPI), normalized pigment chlorophyll index (NPCI), and normalized green-blue difference index (NGBDI) were selected as model inputs due to their higher grey relational degree with the CNC and lower correlation between one another. The PLS model based on the five-band reflectance and the three vegetation indices achieved the best accuracy (R_v = 0.79, RMSE_v = 0.11). Support vector machine (SVM) and BPNN were then used to classify the irrigation levels based on five spectral features which had high correlations with irrigation levels. SVM reached a higher accuracy of 80.6%. The results of this study demonstrated that high resolution multispectral images could provide effective information for CNC prediction and water irrigation level recognition for sugarcane crop.

Breeding for Economically and Environmentally Sustainable Wheat Varieties: An Integrated Approach from Genomics to Selection

There is currently a strong societal demand for sustainability, quality, and safety in bread wheat production. To address these challenges, new and innovative knowledge, resources, tools, and methods to facilitate breeding are needed. This starts with the development of high throughput genomic tools including single nucleotide polymorphism (SNP) arrays, high density molecular marker maps, and full genome sequences. Such powerful tools are essential to perform genome-wide association studies (GWAS), to implement genomic and phenomic selection, and to characterize the worldwide diversity. This is also useful to breeders to broaden the genetic basis of elite varieties through the introduction of novel sources of genetic diversity. Improvement in varieties particularly relies on the detection of genomic regions involved in agronomical traits including tolerance to biotic (diseases and pests) and abiotic (drought, nutrient deficiency, high temperature) stresses. When enough resolution is achieved, this can result in the identification of candidate genes that could further be characterized to identify relevant alleles. Breeding must also now be approached through in silico modeling to simulate plant development, investigate genotype × environment interactions, and introduce marker-trait linkage information in the models to better implement genomic selection. Breeders must be aware of new developments and the information must be made available to the world wheat community to develop new high-yielding varieties that can meet the challenge of higher wheat production in a sustainable and fluctuating agricultural context. In this review, we compiled all knowledge and tools produced during the BREEDWHEAT project to show how they may contribute to face this challenge in the coming years.

Sustainability Trait Modeling of Field-Grown Switchgrass (Panicum virgatum) Using UAV-Based Imagery

Unmanned aerial vehicles (UAVs) provide an intermediate scale of spatial and spectral data collection that yields increased accuracy and consistency in data collection for morphological and physiological traits than satellites and expanded flexibility and high-throughput compared to ground-based data collection. In this study, we used UAV-based remote sensing for automated phenotyping of field-grown switchgrass (Panicum virgatum), a leading bioenergy feedstock. Using vegetation indices calculated from a UAV-based multispectral camera, statistical models were developed for rust disease caused by Puccinia novopanici, leaf chlorophyll, nitrogen, and lignin contents. For the first time, UAV remote sensing technology was used to explore the potentials for multiple traits associated with sustainable production of switchgrass, and one statistical model was developed for each individual trait based on the statistical correlation between vegetation indices and the corresponding trait. Also, for the first time, lignin content was estimated in switchgrass shoots via UAV-based multispectral image analysis and statistical analysis. The UAV-based models were verified by ground-truthing via correlation analysis between the traits measured manually on the ground-based with UAV-based data. The normalized difference red edge (NDRE) vegetation index outperformed the normalized difference vegetation index (NDVI) for rust disease and nitrogen content, while NDVI performed better than NDRE for chlorophyll and lignin content. Overall, linear models were sufficient for rust disease and chlorophyll analysis, but for nitrogen and lignin contents, nonlinear models achieved better results. As the first comprehensive study to model switchgrass sustainability traits from UAV-based remote sensing, these results suggest that this methodology can be utilized for switchgrass high-throughput phenotyping in the field.

Use of Oblique RGB Imagery and Apparent Surface Area of Plants for Early Estimation of Above-Ground Corn Biomass

Estimating above-ground biomass in the context of fertilization management requires the monitoring of crops at early stages. Conventional remote sensing techniques make use of vegetation indices such as the normalized difference vegetation index (NDVI), but they do not exploit the high spatial resolution (ground sampling distance < 5 mm) now achievable with the introduction of unmanned aerial vehicles (UAVs) in agriculture. The aim of this study was to compare image mosaics to single images for the estimation of corn biomass and the influence of viewing angles in this estimation. Nadir imagery was captured by a high spatial resolution camera mounted on a UAV to generate orthomosaics of corn plots at different growth stages (from V2 to V7). Nadir and oblique images (30° and 45° with respect to the vertical) were also acquired from a zip line platform and processed as single images. Image segmentation was performed using the difference color index Excess Green-Excess Red, allowing for the discrimination between vegetation and background pixels. The apparent surface area of plants was then extracted and compared to biomass measured in situ. An asymptotic total least squares regression was performed and showed a strong relationship between the apparent surface area of plants and both dry and fresh biomass. Mosaics tended to underestimate the apparent surface area in comparison to single images because of radiometric degradation. It is therefore conceivable to process only single images instead of investing time and effort in acquiring and processing data for orthomosaic generation. When comparing oblique photography, an angle of 30° yielded the best results in estimating corn biomass, with a low residual standard error of orthogonal distance (RSEOD = 0.031 for fresh biomass, RSEOD = 0.034 for dry biomass). Since oblique imagery provides more flexibility in data acquisition with fewer constraints on logistics, this approach might be an efficient way to monitor crop biomass at early stages.

High night temperature effects on wheat and rice: Current status and way forward

Rapid increases in minimum night temperature than in maximum day temperature is predicted to continue, posing significant challenges to crop productivity. Rice and wheat are two major staples that are sensitive to high night-temperature (HNT) stress. This review aims to (i) systematically compare the grain yield responses of rice and wheat exposed to HNT stress across scales, and (ii) understand the physiological and biochemical responses that affect grain yield and quality. To achieve this, we combined a synthesis of current literature on HNT effects on rice and wheat with information from a series of independent experiments we conducted across scales, using a common set of genetic materials to avoid confounding our findings with differences in genetic background. In addition, we explored HNT-induced alterations in physiological mechanisms including carbon balance, source-sink metabolite changes and reactive oxygen species. Impacts of HNT on grain developmental dynamics focused on grain-filling duration, post-flowering senescence, changes in grain starch and protein composition, starch metabolism enzymes and chalk formation in rice grains are summarized. Finally, we highlight the need for high-throughput field-based phenotyping facilities for improved assessment of large-diversity panels and mapping populations to aid breeding for increased resilience to HNT in crops.

Comparison of Crop Trait Retrieval Strategies Using UAV-Based VNIR Hyperspectral Imaging

Hyperspectral cameras onboard unmanned aerial vehicles (UAVs) have recently emerged for monitoring crop traits at the sub-field scale. Different physical, statistical, and hybrid methods for crop trait retrieval have been developed. However, spectra collected from UAVs can be confounded by various issues, including illumination variation throughout the crop growing season, the effect of which on the retrieval performance is not well understood at present. In this study, four retrieval methods are compared, in terms of retrieving the leaf area index (LAI), fractional vegetation cover (fCover), and canopy chlorophyll content (CCC) of potato plants over an agricultural field for six dates during the growing season. We analyzed: (1) The standard look-up table method (LUTstd), (2) an improved (regularized) LUT method that involves variable correlation (LUTreg), (3) hybrid methods, and (4) random forest regression without (RF) and with (RFexp) the exposure time as an additional explanatory variable. The Soil-Leaf-Canopy (SLC) model was used in association with the LUT-based inversion and hybrid methods, while the statistical modelling methods (RF and RFexp) relied entirely on in situ data. The results revealed that RFexp was the best-performing method, yielding the highest accuracies, in terms of the normalized root mean square error (NRMSE), for LAI (5.36%), fCover (5.87%), and CCC (15.01%). RFexp was able to reduce the effects of illumination variability and cloud shadows. LUTreg outperformed the other two retrieval methods (hybrid methods and LUTstd), with an NRMSE of 9.18% for LAI, 10.46% for fCover, and 12.16% for CCC. Conversely, LUTreg led to lower accuracies than those derived from RF for LAI (5.51%) and for fCover (6.23%), but not for CCC (16.21%). Therefore, the machine learning approaches-in particular, RF-appear to be the most promising retrieval methods for application to UAV-based hyperspectral data.

Improved Accuracy of High-Throughput Phenotyping From Unmanned Aerial Systems by Extracting Traits Directly From Orthorectified Images

The development of high-throughput genotyping and phenotyping has provided access to many tools to accelerate plant breeding programs. Unmanned Aerial Systems (UAS)-based remote sensing is being broadly implemented for field-based high-throughput phenotyping due to its low cost and the capacity to rapidly cover large breeding populations. The Structure-from-Motion photogrammetry processes aerial images taken from multiple perspectives over a field to an orthomosaic photo of a complete field experiment, allowing spectral or morphological trait extraction from the canopy surface for each individual field plot. However, some phenotypic information observable in each raw aerial image seems to be lost to the orthomosaic photo, probably due to photogrammetry processes such as pixel merging and blending. To formally assess this, we introduced a set of image processing methods to extract phenotypes from orthorectified raw aerial images and compared them to the negative control of extracting the same traits from processed orthomosaic images. We predict that standard measures of accuracy in terms of the broad-sense heritability of the remote sensing spectral traits will be higher using the orthorectified photos than with the orthomosaic image. Using three case studies, we therefore compared the broad-sense heritability of phenotypes in wheat breeding nurseries including, (1) canopy temperature from thermal imaging, (2) canopy normalized difference vegetation index (NDVI), and (3) early-stage ground cover from multispectral imaging. We evaluated heritability estimates of these phenotypes extracted from multiple orthorectified aerial images via four statistical models and compared the results with heritability estimates of these phenotypes extracted from a single orthomosaic image. Our results indicate that extracting traits directly from multiple orthorectified aerial images yielded increased estimates of heritability for all three phenotypes through proper modeling, compared to estimation using traits extracted from the orthomosaic image. In summary, the image processing methods demonstrated in this study have the potential to improve the quality of the plant trait extracted from high-throughput imaging. This, in turn, can enable breeders to utilize phenomics technologies more effectively for improved selection.

Qualifications of Rice Growth Indicators Optimized at Different Growth Stages Using Unmanned Aerial Vehicle Digital Imagery

The accurate estimation of the key growth indicators of rice is conducive to rice production, and the rapid monitoring of these indicators can be achieved through remote sensing using the commercial RGB cameras of unmanned aerial vehicles (UAVs). However, the method of using UAV RGB images lacks an optimized model to achieve accurate qualifications of rice growth indicators. In this study, we established a correlation between the multi-stage vegetation indices (VIs) extracted from UAV imagery and the leaf dry biomass, leaf area index, and leaf total nitrogen for each growth stage of rice. Then, we used the optimal VI (OVI) method and object-oriented segmentation (OS) method to remove the noncanopy area of the image to improve the estimation accuracy. We selected the OVI and the models with the best correlation for each growth stage to establish a simple estimation model database. The results showed that the OVI and OS methods to remove the noncanopy area can improve the correlation between the key growth indicators and VI of rice. At the tillering stage and early jointing stage, the correlations between leaf dry biomass (LDB) and the Green Leaf Index (GLI) and Red Green Ratio Index (RGRI) were 0.829 and 0.881, respectively; at the early jointing stage and late jointing stage, the coefficient of determination (R2) between the Leaf Area Index (LAI) and Modified Green Red Vegetation Index (MGRVI) was 0.803 and 0.875, respectively; at the early stage and the filling stage, the correlations between the leaf total nitrogen (LTN) and UAV vegetation index and the Excess Red Vegetation Index (ExR) were 0.861 and 0.931, respectively. By using the simple estimation model database established using the UAV-based VI and the measured indicators at different growth stages, the rice growth indicators can be estimated for each stage. The proposed estimation model database for monitoring rice at the different growth stages is helpful for improving the estimation accuracy of the key rice growth indicators and accurately managing rice production.

Multitemporal time series analysis using machine learning models for ground deformation in the Erhai region, China

Ground deformation (GD) has been widely reported as a global issue and is now an ongoing problem that will profoundly endanger the public safety. GD is a complex and dynamic problem with many contributing factors that occur over time. In the literature, there are only a few methods that can effectively monitor GD. Microwave remote sensing data such as interferometric synthetic aperture radar (InSAR) are mostly adopted to assess GD. These data can reveal the surface deforming areas with great precision, mapping GD results at a large scale. In this study, the effects of GD and the influencing factors, such as the building area, the water level, the cumulative precipitation, and the cumulative temperature, are modeled in the Erhai region with small baseline subset interferometric SAR (SBAS-InSAR) data that are applied using machine learning (ML) methods. The ML methods, namely, multiple linear regression (MLR), multilayer perceptron backpropagation (MLP-BP), least squares support vector machine (LSSVM), and particle swarm optimization (PSO)-LSSVM, are used to predict GD, and the results are compared. Particularly, the PSO-LSSVM method has obtained the least root mean square error (RMSE) and mean relative error (MRE) of 11.448 and 0.112, respectively. Therefore, the results have proven that the proposed PSO-LSSVM is very efficient in analyzing GD.

Effect of Different Combinations of Phosphorus and Nitrogen Fertilization on Arbuscular Mycorrhizal Fungi and Aphids in Wheat

While chemical fertilizers can be used to increase crop yield, the abuse of fertilizers aggravates environmental pollution and soil degradation. Understanding the effects of chemical fertilizers on the interaction between arbuscular mycorrhizal fungi (AMF) and pest insects is of great benefit to crop and environmental protection, because AMF can enhance the nutrition absorption and insect resistance of crops. This study tested the effect of different levels of phosphorus, nitrogen, and their interactions on AMF, secondary metabolites, Sitobion avenae in garden, as well as the wheat traits in field. The results showed that AMF colonization on roots in the P0N1 treatment (0 g P/pot, 1.3083 g N/pot in the garden, and 0 g P/plot, 299.84 g N/plot) was the highest in both the garden and the field. The abundance of aphid was reduced in the P0N1 treatment, and there were negative relationships between aphids and AMF and phenolics, but a positive relationship between AMF and phenolics. Our results indicated that a change in the ratio of phosphorus to nitrogen affects the relationship among AMF, aphid abundance, and metabolites. The results also suggested an approach to save chemical fertilizers that could improve crop health and protect the agroecosystem against pollution at the same time.