High-Throughput Phenotyping of Seed/Seedling Evaluation Using Digital Image Analysis

Identification and estimation of lodging in bread wheat genotypes using machine learning predictive algorithms

BACKGROUND

Lodging or stem bending decreases wheat yield quality and quantity. Thus, the traits reflected in early lodging wheat are helpful for early monitoring to some extent. In order to identify the superior genotypes and compare multiple linear regression (MLR) with support vector regression (SVR), artificial neural network (ANN), and random forest regression (RF) for predicting lodging in Iranian wheat accessions, a total of 228 wheat accessions were cultivated under field conditions in an alpha-lattice experiment, randomized incomplete block design, with two replications in two cropping seasons (2018-2019 and 2019-2020). To measure traits, a total of 20 plants were isolated from each plot and were measured using image processing.

RESULTS

The lodging score index (LS) had the highest positive correlation with plant height (r = 0.78**), Number of nodes (r = 0.71**), and internode length 1 (r = 0.70**). Genotypes were classified into four groups based on heat map output. The most lodging-resistant genotypes showed a lodging index of zero or close to zero. The findings revealed that the RF algorithm provided a more accurate estimate (R2 = 0.887 and RMSE = 0.091 for training data and R2 = 0.768 and RMSE = 0.124 for testing data) of wheat lodging than the ANN and SVR algorithms, and its robustness was as good as ANN but better than SVR.

CONCLUSION

Overall, it seems that the RF model can provide a helpful predictive and exploratory tool to estimate wheat lodging in the field. This work can contribute to the adoption of managerial approaches for precise and non-destructive monitoring of lodging.

Genome-wide association mapping and genomic prediction for pre‑harvest sprouting resistance, low α-amylase and seed color in Iranian bread wheat

BACKGROUND

Pre-harvest sprouting (PHS) refers to a phenomenon, in which the physiologically mature seeds are germinated on the spike before or during the harvesting practice owing to high humidity or prolonged period of rainfall. Pre-harvest sprouting (PHS) remarkably decreases seed quality and yield in wheat; hence it is imperative to uncover genomic regions responsible for PHS tolerance to be used in wheat breeding. A genome-wide association study (GWAS) was carried out using 298 bread wheat landraces and varieties from Iran to dissect the genomic regions of PHS tolerance in a well-irrigated environment. Three different approaches (RRBLUP, GBLUP and BRR) were followed to estimate prediction accuracies in wheat genomic selection.

RESULTS

Genomes B, A, and D harbored the largest number of significant marker pairs (MPs) in both landraces (427,017, 328,006, 92,702 MPs) and varieties (370,359, 266,708, 63,924 MPs), respectively. However, the LD levels were found the opposite, i.e., genomes D, A, and B have the highest LD, respectively. Association mapping by using GLM and MLM models resulted in 572 and 598 marker-trait associations (MTAs) for imputed SNPs (- log10 P > 3), respectively. Gene ontology exhibited that the pleitropic MPs located on 1A control seed color, α-Amy activity, and PHS. RRBLUP model indicated genetic effects better than GBLUP and BRR, offering a favorable tool for wheat genomic selection.

CONCLUSIONS

Gene ontology exhibited that the pleitropic MPs located on 1A can control seed color, α-Amy activity, and PHS. The verified markers in the current work can provide an opportunity to clone the underlying QTLs/genes, fine mapping, and genome-assisted selection.Our observations uncovered key MTAs related to seed color, α-Amy activity, and PHS that can be exploited in the genome-mediated development of novel varieties in wheat.

High-Throughput Extraction of Seed Traits Using Image Acquisition and Analysis

Seed traits can easily be assessed using image processing tools to evaluate differences in crop variety performances in response to environment and stress. In this chapter, we describe a protocol to measure seed traits that can be applied to crops with small grains, including legume grains with little modification. The imaging processing tool can be applied to process a batch of images without human intervention. The method allows evaluation of geometric and color features, and currently extracts 11 seed traits that include number of seeds, seed area, major axis, minor axis, eccentricity, and mean and standard deviation of reflectance in red, green, and blue channels from seed images. Protocols or methods, including the one described in this chapter, facilitate phenotyping seed traits in a high-throughput and automated manner, which can be applied in plant breeding programs and food processing industry to evaluate seed quality.

Advanced high-throughput plant phenotyping techniques for genome-wide association studies: A review

Linking phenotypes and genotypes to identify genetic architectures that regulate important traits is crucial for plant breeding and the development of plant genomics. In recent years, genome-wide association studies (GWASs) have been applied extensively to interpret relationships between genes and traits. Successful GWAS application requires comprehensive genomic and phenotypic data from large populations. Although multiple high-throughput DNA sequencing approaches are available for the generation of genomics data, the capacity to generate high-quality phenotypic data is lagging far behind. Traditional methods for plant phenotyping mostly rely on manual measurements, which are laborious, inaccurate, and time-consuming, greatly impairing the acquisition of phenotypic data from large populations. In contrast, high-throughput phenotyping has unique advantages, facilitating rapid, non-destructive, and high-throughput detection, and, in turn, addressing the shortcomings of traditional methods. Aim of Review: This review summarizes the current status with regard to the integration of high-throughput phenotyping and GWAS in plants, in addition to discussing the inherent challenges and future prospects. Key Scientific Concepts of Review: High-throughput phenotyping, which facilitates non-contact and dynamic measurements, has the potential to offer high-quality trait data for GWAS and, in turn, to enhance the unraveling of genetic structures of complex plant traits. In conclusion, high-throughput phenotyping integration with GWAS could facilitate the revealing of coding information in plant genomes.

High-Throughput Corn Image Segmentation and Trait Extraction Using Chlorophyll Fluorescence Images

Plant segmentation and trait extraction for individual organs are two of the key challenges in high-throughput phenotyping (HTP) operations. To address this challenge, the Ag Alumni Seed Phenotyping Facility (AAPF) at Purdue University utilizes chlorophyll fluorescence images (CFIs) to enable consistent and efficient automatic segmentation of plants of different species, age, or color. A series of image analysis routines were also developed to facilitate the quantitative measurements of key corn plant traits. A proof-of-concept experiment was conducted to demonstrate the utility of the extracted traits in assessing drought stress reaction of corn plants. The image analysis routines successfully measured several corn morphological characteristics for different sizes such as plant height, area, top-node height and diameter, number of leaves, leaf area, and angle in relation to the stem. Data from the proof-of-concept experiment showed how corn plants behaved when treated with different water regiments or grown in pot of different sizes. High-throughput image segmentation and analysis basing on a plant's fluorescence image was proved to be efficient and reliable. Extracted trait on the segmented stem and leaves of a corn plant demonstrated the importance and utility of this kind of trait data in evaluating the performance of corn plant under stress. Data collected from corn plants grown in pots of different volumes showed the importance of using pot of standard size when conducting and reporting plant phenotyping data in a controlled-environment facility.

Growth Analysis of Wheat Using Machine Vision: Opportunities and Challenges

Crop growth analysis is used for the assessment of crop yield potential and stress tolerance. Capturing continuous plant growth has been a goal since the early 20th century; however, this requires a large number of replicates and multiple destructive measurements. The use of machine vision techniques holds promise as a fast, reliable, and non-destructive method to analyze crop growth based on surrogates for plant traits and growth parameters. We used machine vision to infer plant size along with destructive measurements at multiple time points to analyze growth parameters of spring wheat genotypes. We measured side-projected area by machine vision and RGB imaging. Three traits, i.e., biomass (BIO), leaf dry weight (LDW), and leaf area (LA), were measured using low-throughput techniques. However, RGB imaging was used to produce side projected area (SPA) as the high throughput trait. Significant effects of time point and genotype on BIO, LDW, LA, and SPA were observed. SPA was a robust predictor of leaf area, leaf dry weight, and biomass. Relative growth rate estimated using SPA was a robust predictor of the relative growth rate measured using biomass and leaf dry weight. Large numbers of entries can be assessed by this method for genetic mapping projects to produce a continuous growth curve with fewer replicates.

SeedGerm: a cost-effective phenotyping platform for automated seed imaging and machine-learning based phenotypic analysis of crop seed germination

Efficient seed germination and establishment are important traits for field and glasshouse crops. Large-scale germination experiments are laborious and prone to observer errors, leading to the necessity for automated methods. We experimented with five crop species, including tomato, pepper, Brassica, barley, and maize, and concluded an approach for large-scale germination scoring. Here, we present the SeedGerm system, which combines cost-effective hardware and open-source software for seed germination experiments, automated seed imaging, and machine-learning based phenotypic analysis. The software can process multiple image series simultaneously and produce reliable analysis of germination- and establishment-related traits, in both comma-separated values (CSV) and processed images (PNG) formats. In this article, we describe the hardware and software design in detail. We also demonstrate that SeedGerm could match specialists' scoring of radicle emergence. Germination curves were produced based on seed-level germination timing and rates rather than a fitted curve. In particular, by scoring germination across a diverse panel of Brassica napus varieties, SeedGerm implicates a gene important in abscisic acid (ABA) signalling in seeds. We compared SeedGerm with existing methods and concluded that it could have wide utilities in large-scale seed phenotyping and testing, for both research and routine seed technology applications.

A Physio-Morphological Trait-Based Approach for Breeding Drought Tolerant Wheat

In the past, there have been drought events in different parts of the world, which have negatively influenced the productivity and production of various crops including wheat (Triticum aestivum L.), one of the world's three important cereal crops. Breeding new high yielding drought-tolerant wheat varieties is a research priority specifically in regions where climate change is predicted to result in more drought conditions. Commonly in breeding for drought tolerance, grain yield is the basis for selection, but it is a complex, late-stage trait, affected by many factors aside from drought. A strategy that evaluates genotypes for physiological responses to drought at earlier growth stages may be more targeted to drought and time efficient. Such an approach may be enabled by recent advances in high-throughput phenotyping platforms (HTPPs). In addition, the success of new genomic and molecular approaches rely on the quality of phenotypic data which is utilized to dissect the genetics of complex traits such as drought tolerance. Therefore, the first objective of this review is to describe the growth-stage based physio-morphological traits that could be targeted by breeders to develop drought-tolerant wheat genotypes. The second objective is to describe recent advances in high throughput phenotyping of drought tolerance related physio-morphological traits primarily under field conditions. We discuss how these strategies can be integrated into a comprehensive breeding program to mitigate the impacts of climate change. The review concludes that there is a need for comprehensive high throughput phenotyping of physio-morphological traits that is growth stage-based to improve the efficiency of breeding drought-tolerant wheat.

Development of a Mushroom Growth Measurement System Applying Deep Learning for Image Recognition

In Taiwan, mushrooms are an agricultural product with high nutritional value and economic benefit. However, global warming and climate change have affected plant quality. As a result, technological greenhouses are replacing traditional tin houses as locations for mushroom planting. These greenhouses feature several complex parameters. If we can reduce the complexity such greenhouses and improve the efficiency of their production management using intelligent schemes, technological greenhouses could become the expert assistants of farmers. In this paper, the main goal of the developed system is to measure the mushroom size and to count the amount of mushrooms. According to the results of each measurement, the growth rate of the mushrooms can be estimated. The proposed system also records the data of the mushrooms and broadcasts them to the mobile phone of the farmer. This improves the effectiveness of the production management. The proposed system is based on the convolutional neural network of deep learning, which is used to localize the mushrooms in the image. A positioning correction method is also proposed to modify the localization result. The experiments show that the proposed system has a good performance concerning the image measurement of mushrooms.

An Evaluation of the Variation in the Morphometric Parameters of Grain of Six Triticum Species with the Use of Digital Image Analysis

Kernel images of six wheat species were subjected to shape and color analyses to determine variations in the morphometric parameters of grain. The values of kernel shape descriptors (area, perimeter, Feret diameter, minimal Feret diameter, circularity, aspect ratio, roundness, solidity) and color descriptors (H, S, I and L*a*b*) were investigated. The influence of grain colonization by endophytic fungi on the color of the seed coat was also evaluated. Polish wheat grain was characterized by the highest intraspecific variation in shape and color. Bread wheat was most homogeneous in terms of the studied shape and color descriptors. An analysis of variations in wheat lines revealed greater differences in phenotypic traits of relict wheats, which have a larger gene pool. The grain of ancient wheat species was characterized by low roundness values and relatively low solidity. Shape and color descriptors were strongly discriminating components in the studied wheat species. Their discriminatory power was determined mainly by genotype. A method that supports rapid discrimination of cereal species and admixtures of other cereals in grain batches is required to guarantee the quality and safety of grain. The results of this study indicate that digital image analysis can be effectively used for this purpose.