1
|
Zemła M, Michałowski S, Prociak A. Synthesis and Characterization of Flame Retarded Rigid Polyurethane Foams with Different Types of Blowing Agents. MATERIALS (BASEL, SWITZERLAND) 2023; 16:7217. [PMID: 38005146 PMCID: PMC10673181 DOI: 10.3390/ma16227217] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/18/2023] [Revised: 11/02/2023] [Accepted: 11/13/2023] [Indexed: 11/26/2023]
Abstract
In this study, rigid polyurethane foams modified with non-halogenated flame retardant were obtained. The foams were synthesized using two systems containing different blowing agents. In the first one, cyclopentane and water were used as a mixture of blowing agents, and in the second one, only water was used as a chemical blowing agent. The systems were modified with the additive phosphorus flame retardant Roflam F5. The obtained modified foams were tested for their flammability and basic properties, such as apparent density, closed-cell contents and analyses of the cell structures, thermal conductivity, mechanical properties, and water absorption. Increasing the content of Roflam F5 caused a decrease in temperature during the combustion of the material and extended the burning time. The addition of 1.0 wt.% phosphorus derived from Roflam F5 caused the modified rigid polyurethane foam to become a self-extinguishing material. The increase in the content of Roflam F5 caused a decrease in the total heat release and the maximum heat release rate during the pyrolysis combustion flow calorimetry. The foams with the highest content of flame retardant and foamed with a chemical-physical and chemical blowing agent had a lower total heat release by 19% and 11%, respectively, compared to reference foams.
Collapse
Affiliation(s)
- Marcin Zemła
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland
| | | | - Aleksander Prociak
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland
| |
Collapse
|
2
|
Cherednichenko K, Kopitsyn D, Smirnov E, Nikolaev N, Fakhrullin R. Fireproof Nanocomposite Polyurethane Foams: A Review. Polymers (Basel) 2023; 15:polym15102314. [PMID: 37242889 DOI: 10.3390/polym15102314] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Revised: 05/08/2023] [Accepted: 05/11/2023] [Indexed: 05/28/2023] Open
Abstract
First introduced in 1954, polyurethane foams rapidly became popular because of light weight, high chemical stability, and outstanding sound and thermal insulation properties. Currently, polyurethane foam is widely applied in industrial and household products. Despite tremendous progress in the development of various formulations of versatile foams, their use is hindered due to high flammability. Fire retardant additives can be introduced into polyurethane foams to enhance their fireproof properties. Nanoscale materials employed as fire-retardant components of polyurethane foams have the potential to overcome this problem. Here, we review the recent (last 5 years) progress that has been made in polyurethane foam modification using nanomaterials to enhance its flame retardance. Different groups of nanomaterials and approaches for incorporating them into foam structures are covered. Special attention is given to the synergetic effects of nanomaterials with other flame-retardant additives.
Collapse
Affiliation(s)
- Kirill Cherednichenko
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas "Gubkin University", Moscow 119991, Russia
| | - Dmitry Kopitsyn
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas "Gubkin University", Moscow 119991, Russia
| | - Egor Smirnov
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas "Gubkin University", Moscow 119991, Russia
| | - Nikita Nikolaev
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas "Gubkin University", Moscow 119991, Russia
| | - Rawil Fakhrullin
- Department of Physical and Colloid Chemistry, Faculty of Chemical and Environmental Engineering, National University of Oil and Gas "Gubkin University", Moscow 119991, Russia
- Institute of Fundamental Medicine and Biology, Kazan Federal University, Kreml Uramı 18, Kazan 420008, Russia
| |
Collapse
|
3
|
Anna S, Karolina M, Sylwia C. Buckwheat Hulls/Perlite as an Environmentally Friendly Flame-Retardant System for Rigid Polyurethane Foams. Polymers (Basel) 2023; 15:polym15081913. [PMID: 37112060 PMCID: PMC10141548 DOI: 10.3390/polym15081913] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2023] [Revised: 04/13/2023] [Accepted: 04/14/2023] [Indexed: 04/29/2023] Open
Abstract
This article presents an innovative approach to the flame retardancy of rigid polyurethane foams using natural waste in the form of buckwheat hulls in combination with an inorganic additive-perlite. A series of tests were presented in which various contents of flame-retardant additives were used. Based on the test results, it was found that the addition of the buckwheat hull/perlite system affected the physical and mechanical properties of the obtained foams, i.e., apparent density, impact strength, and compressive and flexural strength. The structure of the system had also changed, directly affecting the hydrophobic properties of the foams. In addition, it was observed that the addition of buckwheat hull/perlite modifiers improved the burning behavior of composite foams.
Collapse
Affiliation(s)
- Strąkowska Anna
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, 90-537 Lodz, Poland
| | - Miedzińska Karolina
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, 90-537 Lodz, Poland
| | - Członka Sylwia
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, 90-537 Lodz, Poland
| |
Collapse
|
4
|
Muhammed Raji A, Hambali HU, Khan ZI, Binti Mohamad Z, Azman H, Ogabi R. Emerging trends in flame retardancy of rigid polyurethane foam and its composites: A review. J CELL PLAST 2022. [DOI: 10.1177/0021955x221144564] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/03/2022]
Abstract
Owing to the superior thermal insulating attributes of rigid polyurethane foam (RPUF) compared to other insulating materials (expanded and extruded polystyrene, mineral wool), it remains the most dominant insulating material and most studied polymer foam. Like other polyurethane foam, RPUF is highly flammable, necessitating the incorporation of flame retardants (FR) during production to lower combustibility, promoting its continuous use as insulation material in construction, transportation, and others. The popular approaches for correcting the high flammability of RPUF are copolymerization and blending (with FR). The second method has proven to be most effective as there are limited trade-offs in RPUF properties. Meanwhile, the high flammability of RPUF is still a significant hindrance in emerging applications (sensors, space travel, and others), and this has continuously inspired research in the flame retardancy of RPUF. In this study, properties, and preparation methods of RPUF are described, factors responsible for the high flammability of PUF are discussed, and flame retardancy of RPUF is thoroughly reviewed. Notably, most FR for RPUF are inorganic nanoparticles, lignin, intumescent FR systems of expandable graphite (EG), ammonium polyphosphate (APP), and hybridized APP or EG with other FR. These could be due to their ease of processing, low cost, and being environmentally benign. Elaborate discussion on RPUF FR mechanisms were also highlighted. Lastly, a summary and future perspectives in fireproofing RPUF are provided, which could inspire the design of new FR for RPUF.
Collapse
Affiliation(s)
- Abdulwasiu Muhammed Raji
- Enhanced Polymer Research Group, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
- Department of Bioprocess and Polymer Engineering, School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Malaysia
- Department of Polymer and Textile Technology, Yaba College of Technology, Lagos, Nigeria
| | - Hambali Umar Hambali
- Department of Chemical Engineering, Faculty of Engineering and Technology, University of Ilorin, Ilorin, Nigeria
| | - Zahid Iqbal Khan
- Enhanced Polymer Research Group, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
| | - Zurina Binti Mohamad
- Enhanced Polymer Research Group, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
- Department of Bioprocess and Polymer Engineering, School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Malaysia
| | - Hassan Azman
- Enhanced Polymer Research Group, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
- Department of Bioprocess and Polymer Engineering, School of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Malaysia
| | - Raphael Ogabi
- INSA Center Val de Loire, University Orleans, Bourges, France
| |
Collapse
|
5
|
Thermal Insulating Rigid Polyurethane Foams with Bio-Polyol from Rapeseed Oil Modified by Phosphorus Additive and Reactive Flame Retardants. Int J Mol Sci 2022; 23:ijms232012386. [PMID: 36293244 PMCID: PMC9604392 DOI: 10.3390/ijms232012386] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/01/2022] [Revised: 10/04/2022] [Accepted: 10/12/2022] [Indexed: 01/24/2023] Open
Abstract
In this article, rigid polyurethane foams obtained with the addition of a bio-polyol from rapeseed oil, were modified with the dimethyl propane phosphonate as additive flame retardant and two reactive flame retardants diethyl (hydroxymethyl)phosphonate and diethyl bis-(2-hydroxyethyl)-aminomethylphosphonate. The influence of used flame retardants on the foaming process and characteristic processing times of tested polyurethane systems were determined. The obtained foams were tested in terms of cell structure, physical and mechanical properties, as well as flammability. Modified foams had worse mechanical and thermal insulation properties, caused by lower cellular density and higher anisotropy coefficient in the cross-section parallel to the foam rise direction, compared to unmodified foam. However, the thermal conductivity of all tested foam materials was lower than 25.82 mW/m∙K. The applied modifiers effectively reduced the flammability of rigid polyurethane foams, among others, increasing the oxygen index above 21.4 vol.%, reducing the total heat released by about 41-51% and the rate of heat release by about 2-52%. A correlation between the limiting oxygen index values and both total heat released parameters from the pyrolysis combustion flow calorimetry and cone calorimetry was observed. The correlation was also visible between the value of the heat release capacity (HRC) parameter obtained from the pyrolysis combustion flow calorimetry and the maximum average rate of heat emission (MARHE) from the cone calorimeter test.
Collapse
|
6
|
Thong YX, Li X, Yin XJ. Determining the best flame retardant for rigid polyurethane foam—Tris(2‐chloroisopropyl) phosphate, expandable graphite, or silica aerogel. J Appl Polym Sci 2022. [DOI: 10.1002/app.51888] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Affiliation(s)
- Ya Xuan Thong
- Advanced Materials Technology Centre Singapore Polytechnic Singapore Singapore
| | - Xiaodong Li
- Advanced Materials Technology Centre Singapore Polytechnic Singapore Singapore
| | - Xi Jiang Yin
- Advanced Materials Technology Centre Singapore Polytechnic Singapore Singapore
| |
Collapse
|
7
|
Bio-Based Rigid Polyurethane Foam Composites Reinforced with Bleached Curauá Fiber. Int J Mol Sci 2021; 22:ijms222011203. [PMID: 34681863 PMCID: PMC8538972 DOI: 10.3390/ijms222011203] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2021] [Revised: 10/04/2021] [Accepted: 10/13/2021] [Indexed: 12/03/2022] Open
Abstract
This study aims to evaluate the influence of using a bleached Curauá fiber (CF) as filler in a novel rigid polyurethane foam (RPUF) composite. The influence of 0.1, 0.5 and 1 wt.% of the reinforcements on the processing characteristics, cellular structure, mechanical, dynamic-mechanical, thermal, and flame behaviors were assessed and discussed for RPUF freely expanded. The results showed that the use of 0.5 wt.% of CF resulted in RPUF with smoother cell structure with low differences on the processing times and viscosity for the filled pre-polyol. These morphological features were responsible for the gains in mechanical properties, in both parallel and perpendicular rise directions, and better viscoelastic characteristics. Despite the gains, higher thermal conductivity and lower flammability were reported for the developed RPUF composites, related to the high content of cellulose and hemicellulose on the bleached CF chemical composition. This work shows the possibility of using a Brazilian vegetable fiber, with low exploration for the manufacturing of composite materials with improved properties. The developed RPUF presents high applicability as enhanced cores for the manufacturing of structural sandwich panels, mainly used in civil, aircraft, and marine industries.
Collapse
|
8
|
Strąkowska A, Członka S, Miedzińska K, Strzelec K. Chlorine-Functional Silsesquioxanes (POSS-Cl) as Effective Flame Retardants and Reinforcing Additives for Rigid Polyurethane Foams. Molecules 2021; 26:3979. [PMID: 34210013 PMCID: PMC8271702 DOI: 10.3390/molecules26133979] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2021] [Revised: 06/24/2021] [Accepted: 06/26/2021] [Indexed: 11/29/2022] Open
Abstract
The subject of the research was the production of silsesquioxane modified rigid polyurethane (PUR) foams (POSS-Cl) with chlorine functional groups (chlorobenzyl, chloropropyl, chlorobenzylethyl) characterized by reduced flammability. The foams were prepared in a one-step additive polymerization reaction of isocyanates with polyols, and the POSS modifier was added to the reaction system in an amount of 2 wt.% polyol. The influence of POSS was analyzed by performing a series of tests, such as determination of the kinetics of foam growth, determination of apparent density, and structure analysis. Compressive strength, three-point bending strength, hardness, and shape stability at reduced and elevated temperatures were tested, and the hydrophobicity of the surface was determined. The most important measurement was the determination of the thermal stability (TGA) and the flammability of the modified systems using a cone calorimeter. The obtained results, after comparing with the results for unmodified foam, showed a large influence of POSS modifiers on the functional properties, especially thermal and fire-retardant, of the obtained PUR-POSS-Cl systems.
Collapse
Affiliation(s)
- Anna Strąkowska
- Institute of Polymer and Dye Technology, Lodz University of Technology, 90-537 Lodz, Poland; (S.C.); (K.M.); (K.S.)
| | | | | | | |
Collapse
|
9
|
Influence of a Natural Plant Antioxidant on the Ageing Process of Ethylene-norbornene Copolymer (Topas). Int J Mol Sci 2021; 22:ijms22084018. [PMID: 33924648 PMCID: PMC8070042 DOI: 10.3390/ijms22084018] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/09/2021] [Revised: 04/09/2021] [Accepted: 04/12/2021] [Indexed: 12/27/2022] Open
Abstract
In the field of polymer technology, a variety of mainly synthetic additives are used to stabilize the materials during processing. However, natural compounds of plant origin can be a green alternative to chemicals such as synthetic polyphenols. An analysis of the effect of hesperidin on the aging behavior of ethylene-norbornene copolymer was performed. The evaluation of changes in the tested samples was possible by applying the following tests: determination of the surface energy and OIT values, mechanical properties analysis, colour change measurements, FT-IR and TGA analyses. The obtained results proved that hesperidin can be effectively used as natural stabilizer for polymers. Furthermore, as a result of this compound addition to Topas-silica composites, their surface and physico-mechanical properties have been improved and the resistance to aging significantly increased. Additionally, hesperidin can act as a dye or colour indicator and only few scientific reports describe a possibility of using flavonoids to detect changes in products during their service life, e.g., in food packaging. In the available literature, there is no information about the potential use of hesperidin as a stabilizer for cycloolefin copolymers. Therefore, this approach may contribute not only to the current state of knowledge, but also presents an eco-friendly solution that can be a good alternative to synthetic stabilizers.
Collapse
|
10
|
Członka S, Kairytė A, Miedzińska K, Strąkowska A, Adamus-Włodarczyk A. Mechanically Strong Polyurethane Composites Reinforced with Montmorillonite-Modified Sage Filler ( Salvia officinalis L.). Int J Mol Sci 2021; 22:3744. [PMID: 33916847 PMCID: PMC8038432 DOI: 10.3390/ijms22073744] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2021] [Revised: 03/30/2021] [Accepted: 04/01/2021] [Indexed: 01/10/2023] Open
Abstract
Rigid polyurethane (PUR) foams reinforced with 1, 2, and 5 wt.% of salvia filler (SO filler) and montmorillonite-modified salvia filler (MMT-modified SO filler) were produced in the following study. The impact of 1, 2, and 5 wt.% of SO filler and MMT-modified SO filler on the morphological, chemical, and mechanical properties of PUR composites were examined. In both cases, the addition of 1 and 2 wt.% of SO fillers resulted in the synthesis of PUR composites with improved physicomechanical properties, while the addition of 5 wt.% of SO fillers resulted in the formation of PUR composites with a less uniform structure and, therefore, some deterioration in their physicomechanical performances. Moreover, the results showed that the modification of SO filler with MMT improved the interphase compatibility between filler surface and PUR matrix. Therefore, such reinforced PUR composites were characterized by a well-developed closed-cell structure and improved mechanical, thermal, and flame-retardant performances. For example, when compared with reference foam, the addition of 2 wt.% of MMT-modified SO filler resulted in the formation of PUR composites with greater mechanical properties (compressive strength, flexural strength) and improved dynamic-mechanical properties (storage modulus). The PUR composites were characterized by better thermal stability as well as improved flame retardancy-e.g., decreased peak rate of heat release (pHRR), reduced total smoke release (TSR), and increased limiting oxygen index (LOI).
Collapse
Affiliation(s)
- Sylwia Członka
- Faculty of Chemistry, Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland
| | - Agnė Kairytė
- Laboratory of Thermal Insulating Materials and Acoustics, Faculty of Civil Engineering, Institute of Building Materials, Vilnius Gediminas Technical University, Linkmenu St. 28, LT-08217 Vilnius, Lithuania
| | - Karolina Miedzińska
- Faculty of Chemistry, Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland
| | - Anna Strąkowska
- Faculty of Chemistry, Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland
| | - Agnieszka Adamus-Włodarczyk
- Faculty of Chemistry, Institute of Applied Radiation Chemistry, Lodz University of Technology, 93-590 Lodz, Poland
| |
Collapse
|
11
|
Thermal Insulation and Sound Absorption Properties of Open-Cell Polyurethane Foams Modified with Bio-Polyol Based on Used Cooking Oil. MATERIALS 2020; 13:ma13245673. [PMID: 33322670 PMCID: PMC7763016 DOI: 10.3390/ma13245673] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/10/2020] [Revised: 12/01/2020] [Accepted: 12/09/2020] [Indexed: 11/17/2022]
Abstract
The main goal of this work was to evaluate the thermal insulation and sound absorption properties of open-cell rigid polyurethane foams synthesized with different contents of cooking oil-based polyol. The content of the applied bio-polyol as well as flame retardant (triethyl phosphate) in the foam formulation had a significant influence on the cellular structures of the materials. The open-cell polyurethane foams were characterized by apparent densities in the range 16–30 kg/m3. The sound absorption coefficients of the polyurethanes with various contents of bio-polyol were determined using the standing wave method (Kundt’s tube) in the frequency range of 100–6300 Hz. The effect of the content of the bio-polyol and flame retardant on the coefficient of thermal conductivity (at average temperatures of 0, 10 and 20 °C) as well as the compressive strength (at 20 and −10 °C) was analyzed. Different trends were observed in terms of the thermal insulation properties and sound absorption ability of the open-cell polyurethanes due to the addition of bio-polyol. In conclusion, it is necessary to use systems containing both petrochemical and bio-based raw materials.
Collapse
|