Effect of Wing Corrugation on the Aerodynamic Efficiency of Two-Dimensional Flapping Wings

Adaptivity of a leaf-inspired wind energy harvester with respect to wind speed and direction

Environmental wind is a random phenomenon in both speed and direction, though it can be forecasted to some extent. An example of that is a gust which is an abrupt, but short-time change in wind speed and direction. Being a free and clean source for small-scale energy scavenging, attraction of wind is rapidly growing in the world of energy harvesters. In this paper, a leaf-like flapping wind energy harvester is introduced as the base structure in which a short-span airfoil is attached to the free end of a double-deck cantilever beam. A flap mechanism inspired by scales on sharks' skin and a tail mechanism inspired by birds' horizontal tail are proposed for integration to the base harvester to make it adaptive with respect to wind speed and direction, respectively. The use of the flap mechanism increases the leaf flapping frequency by +2.1 to +11.5 Hz at wind speeds of 1.5 to 6.0 m s-1. Therefore, since the output power of a vibrational harvester is a function of vibration frequency, a figure of merit or an efficiency parameter related to the output power will increase, as well. On the other hand, if there is a misalignment between the harvester's heading and wind direction due to change of the latter one, the harvesting performance deteriorates. Although the base harvester can realign in certain ranges of sideslip angle at each wind speed, when the tail mechanism is integrated into that, it broadens the range of realignable sideslip angles at all the investigated wind speeds by up to 80∘.

Structural response and mechanical properties of the hind wing of the beetle Protaetia brevitarsis

The folding/unfolding mechanism and collision recovery effect of the beetle's hind wings can provide biomimetic inspiration for the optimization of wing deplorability and the investigation of collision prevention recovery mechanism of new amphibious morphing vehicle. In this study, a method is described to investigate the structural response and mechanical properties of the hind wings of the beetle Protetia brevitarsis under natural conditions. The specially processed test samples were conducted to tensile testing, which facilitates the evaluation of the mechanical properties of specific areas of the hind wing. The micro geometric morphological characteristics of the cross-section of the specimen after tensile fracture were observed by scanning electron microscopy. The three-dimensional morphology of the ventral and dorsal sides of the hind wing was characterized using three-dimensional scanning and reverse modeling methods. The finite element model of the hind wing is developed to investigate the structural deformation and modal response characteristics of its flapping. The uniformly distributed load on the hind wing surface is derived from the lift characteristics obtained from the computational fluid dynamics simulation of flapping wing motion. RESEARCH HIGHLIGHTS: Scanning electron microscope is used to observe the cross-sectional characteristics of the veins and membranes. The material properties of the wing membranes and veins of the hind wings were measured using the tensile testing system. The three-dimensional morphology of the hind wing was characterized using 3D scanning and reverse modeling methods. The finite element model of the hind wing is developed to investigate the structural deformation and modal response characteristics of its flapping.

Review of insect-inspired wing micro air vehicle

Micro air vehicles (MAVs) have wide application prospects in environmental monitoring, disaster rescue and other civil fields because of their flexibility and maneuverability. Compared with fixed wing and rotary wing aircraft, flapping wing micro air vehicles (FWMAVs) have higher energy utilization efficiency and lower cost and have attracted extensive attention from scientists. Insects have become excellent bionic objects for the study of FWMAVs due to their characteristics of low Reynolds number, low noise, hoverability, small size and light weight. By mimicking flying insects, it may be possible to create highly efficient biomimetic FWMAVs. In this paper, insect flight aerodynamics are reviewed, and the mechanism designs of insect-inspired FWMAVs and their aerodynamics are summarized, including the wing type effect, vibration characteristics and aerodynamic characteristics of the flapping wing.

Design optimization and wind tunnel investigation of a flapping system based on the flapping wing trajectories of a beetle's hindwings

To design a flapping-wing micro air vehicle (FWMAV), the hovering flight action of a beetle species (Protaetia brevitarsis) was captured, and various parameters, such as the hindwing flapping frequency, flapping amplitude, angle of attack, rotation angle, and stroke plane angle, were obtained. The wing tip trajectories of the hindwings were recorded and analyzed, and the flapping kinematics were assessed. Based on the wing tip trajectory functions, bioinspired wings and a linkage mechanism flapping system were designed. The critical parameters for the aerodynamic characteristics were investigated and optimized by means of wind tunnel tests, and the artificial flapping system with the best wing parameters was compared with the natural beetle. This work provides insight into how natural flyers execute flight by experimentally duplicating beetle hindwing kinematics and paves the way for the future development of beetle-mimicking FWMAVs.

Kinematic and Aerodynamic Investigation of the Butterfly in Forward Free Flight for the Butterfly-Inspired Flapping Wing Air Vehicle

To ensure the stability of flight, the butterfly needs to flap its wings and simultaneously move its main body to achieve all kinds of flying motion, such as taking off, hovering, or reverse flight. The high-speed camera is used to record the swing of the abdomen, the movement of the wings, and the pitch angle of the body for butterflies during their free flight; the comprehensive biokinetic observations show that the butterfly’s wings and body are coupled in various flight states. The swing of the abdomen and the flap of the fore wing affect the pitch motion significantly. For theoretical analysis of the butterfly flight, a three-dimensional multi-rigid butterfly model based on real butterfly dimension is established, and the aerodynamic of the butterfly flight is simulated and analyzed via computational fluid dynamics methods to obtain an optimal kinematic model of butterfly forward flight. Moreover, the formation and development of three-dimensional vortex structures in the forward flight are also presented. The detailed structures of vortices and their dynamic behavior show that the wing’s flap and the abdominal swing play a key role in reorienting and correcting the “clap and peel” mechanism, and the force generation mechanisms are evaluated. The research indicates that longitudinal flight performance is mainly related to the kinematic parameters of the wing and body, and it can lead to the development of butterfly-inspired flapping wing air vehicles.