Three-Dimensional Assessment of Upper Limb Proprioception via a Wearable Exoskeleton

Monolithic integrated optoelectronic chip for vector force detection

Sensors with a small footprint and real-time detection capabilities are crucial in robotic surgery and smart wearable equipment. Reducing device footprint while maintaining its high performance is a major challenge and a significant limitation to their development. Here, we proposed a monolithic integrated micro-scale sensor, which can be used for vector force detection. This sensor combines an optical source, four photodetectors, and a hemispherical silicone elastomer component on the same sapphire-based AlGaInP wafer. The chip-scale optical coupling is achieved by employing the laser lift-off techniques and the flip-chip bonding to a processed sapphire substrate. This hemispherical structure device can detect normal and shear forces as low as 1 mN within a measurement range of 0-220 mN for normal force and 0-15 mN for shear force. After packaging, the sensor is capable of detecting forces over a broader range, with measurement capabilities extending up to 10 N for normal forces and 0.2 N for shear forces. It has an accuracy of detecting a minimum normal force of 25 mN and a minimum shear force of 20 mN. Furthermore, this sensor has been validated to have a compact footprint of approximately 1.5 mm2, while maintaining high real-time response. We also demonstrate its promising potential by combining this sensor with fine surface texture perception in the fields of compact medical robot interaction and wearable devices.

B-FMEA-TRIZ model for scheme decision in conceptual product design: A study on upper-limb hemiplegia rehabilitation exoskeleton

Upper-limb rehabilitation devices are essential in restoring and improving the motor function of hemiplegic patients. However, developing a product design that meets the needs of users is challenging. Current design tools and methods suffer from limitations such as a single model, poor synergy between integrated models, and subjective bias in analysing user needs and translating them into product attributes. To address these issues, this study proposes a new structural design decision-making model based on Behaviour Analysis (B), Failure Mode Effect Analysis (FMEA), and Teoriya Resheniya Izobreatatelskikh Zadatch (TRIZ theory). The model was developed and applied to design an upper-limb rehabilitation exoskeleton for hemiplegia. In this paper, an empirical investigation was conducted in several rehabilitation hospitals in Xuzhou City and used user journey mapping to identify potential failure points in the behaviour process. Then, the fault models were ranked according to the Fuzzy Risk Priority Number (FRPN) calculated by FMEA and used TRIZ theory to determine principles for resolving contradictions and generating creative design solutions for the product. By integrating B, FMEA, and TRIZ theory, it eliminated subjective bias in product design, improved the design decision-making process, and provided new methods and ideas for designing assistive rehabilitation devices and similar products. The framework of the proposed approach can be used in other contexts to develop effective and precise product designs that meet the needs of users.

CardioVR-ReTone—Robotic Exoskeleton for Upper Limb Rehabilitation following Open Heart Surgery: Design, Modelling, and Control

Following cardiac surgery, patients experience difficulties with the rehabilitation process, often finding it difficult, and therefore lack the motivation for rehabilitation activities. As the number of people aged 65 and over will rise by 207 percent globally by 2050, the need for cardiac rehabilitation will significantly increase, as this is the main population to experience heart problems. To address this challenge, this paper proposes a new robotic exoskeleton concept with 12 DoFs (6 DoFs on each arm), with a symmetrical structure for the upper limbs, to be used in the early rehabilitation of cardiac patients after open-heart surgery. The electromechanical design (geometric, kinematic, and dynamic model), the control architecture, and the VR-based operating module of the robotic exoskeleton are presented. To solve the problem of the high degree of complexity regarding the CardioVR-ReTone kinematic and dynamic model, the iterative algorithm, kinetic energy, and generalized forces were used. The results serve as a complete model of the exoskeleton, from a kinematic and dynamic point of view as well as to the selection of the electric motors, control system, and VR motivation model. The validation of the concept was achieved by evaluating the exoskeleton structure from an ergonomic point of view, emphasizing the movements that will be part of the cardiac rehabilitation.

A 4-DOF Upper Limb Exoskeleton for Physical Assistance: Design, Modeling, Control and Performance Evaluation

Wheelchair mounted upper limb exoskeletons offer an alternative way to support disabled individuals in their activities of daily living (ADL). Key challenges in exoskeleton technology include innovative mechanical design and implementation of a control method that can assure a safe and comfortable interaction between the human upper limb and exoskeleton. In this article, we present a mechanical design of a four degrees of freedom (DOF) wheelchair mounted upper limb exoskeleton. The design takes advantage of non-backdrivable mechanism that can hold the output position without energy consumption and provide assistance to the completely paralyzed users. Moreover, a PD-based trajectory tracking control is implemented to enhance the performance of human exoskeleton system for two different tasks. Preliminary results are provided to show the effectiveness and reliability of using the proposed design for physically disabled people.