Electric Stimulation of Astaxanthin Biosynthesis in Haematococcus pluvialis

Biotechnological strategies overcoming limitations to H. pluvialis-derived astaxanthin production and Morocco's potential

Haematococcus pluvialis is the richest source of natural astaxanthin, but the production of H. pluvialis-derived astaxanthin is usually limited by its slow cell proliferation and astaxanthin accumulation. Efforts to enhance biomass productivity, astaxanthin accumulation, and extraction are ongoing. This review highlights different approaches that have previously been studied in microalgal species for enhanced biomass productivity, as well as optimized methods for astaxanthin accumulation and extraction, and how these methods could be combined to bypass the challenges limiting natural astaxanthin production, particularly in H. pluvialis, at all stages (biomass production, and astaxanthin accumulation and extraction). Biotechnological approaches, such as overexpressing low CO2 inducible genes, utilizing complementary carbon sources, CRISPR-Cas9 bioengineering, and the use of active compounds, for biomass productivity are outlined. Direct astaxanthin extraction from H. pluvialis zoospores and Morocco's potential for microalgal-based astaxanthin production are equally discussed. This review emphasizes the need to engineer an optimized H. pluvialis-derived astaxanthin production system combining two or more of these strategies for increased growth, and astaxanthin productivity, to compete in the larger, lower-priced market in aquaculture and nutraceutical sectors.

A strategy to maximize astaxanthin production from Haematococcus pluvialis in a cost-effective process by utilizing a PBR-LGP-PBR array (PLPA) hybrid system using light guide panel (LGP) and solar cells

This study evaluated economic feasibility through production efficiency, return on investment (ROI) and payout time of a hybrid system using a photobioreactor (PBR)-light guide panel (LGP)-PBR array (PLPA) and solar cells developed for astaxanthin and ω-3 FA simultaneous production of Haematococcus pluvialis. The economic feasibility of the PLPA hybrid system (8 PBRs) and the PBR-PBR-PBR array (PPPA) system (8 PBRs) was evaluated for producing high-value products while effectively reducing CO₂. Introducing a PLPA hybrid system has increased the amount of culture per area by 1.6 times. Also, the shading effect was effectively suppressed with an LGP placed between each PBR, increasing biomass and astaxanthin productivity by 3.39-fold and 4.79-fold, respectively compared to the untreated H. pluvialis cultures. In addition, ROI increased by 6.55 and 4.71 times, and the payout time was reduced by 1.34 and 1.37 times, respectively in 10 and 100-ton scale processes.

Extraction of Valuable Biomolecules from the Microalga Haematococcus pluvialis Assisted by Electrotechnologies

The freshwater microalga Haematococcus pluvialis is well known as the cell factory for natural astaxanthin, which composes up to 4-7% of its total dry weight. The bioaccumulation of astaxanthin in H. pluvialis cysts seems to be a very complex process that depends on different stress conditions during its cultivation. The red cysts of H. pluvialis develop thick and rigid cell walls under stress growing conditions. Thus, the biomolecule extraction requires general cell disruption technologies to reach a high recovery rate. This short review provides an analysis of the different steps in H. pluvialis's up and downstream processing including cultivation and harvesting of biomass, cell disruption, extraction and purification techniques. Useful information on the structure of H. pluvialis's cells, biomolecular composition and properties and the bioactivity of astaxanthin is collected. Special emphasis is given to the recent progress in application of different electrotechnologies during the growth stages and for assistance of the recovery of different biomolecules from H. pluvialis.

Room-Temperature Cell Disruption and Astaxanthin Recovery from Haematococcus lacustris Cysts Using Ultrathin α-Quartz Nanoplates and Ionic Liquids

Ionic liquids (ILs) are new green solvents, which are widely used in lignocellulosic and microalgal biorefineries. However, high-temperature operating conditions limit their application in the extraction of heat-labile algal products, such as bioactive astaxanthin. In this study, we report the technical feasibility of room-temperature astaxanthin extraction from Haematococcus lacustris cysts with a thick and complex cell wall structure, by combining ultrathin α-quartz nanoplates (NPLs) with ethyl-3-methylimidazolium ([Emim])-based ILs. When four different [Emim]-based ILs with thiocyanate (SCN), diethylphosphate (DEP), HSO4, and Cl anions were applied to 90-day-old H. lacustris cysts at room temperature (~28 °C), the astaxanthin extraction efficiency was as low as 9.6–14.2%. Under sonication, α-quartz NPLs disrupted the cyst cell wall for a short duration (5 min). The astaxanthin extraction efficacies of a subsequent IL treatment improved significantly to 49.8% for [Emim] SCN, 60.0% for [Emim] DEP, 80.7% for [Emim] HSO4, and 74.3% for [Emim] Cl ions, which were 4.4, 6.1, 8.4, and 5.2 times higher than the extraction efficacy of only ILs, respectively. This finding suggests that α-quartz NPLs can serve as powerful cell-wall-disrupting agents for the room-temperature IL-mediated extraction of astaxanthin from robust algal cyst cells.

Enhancement of Astaxanthin and Fatty Acid Production in Haematococcus pluvialis Using Strigolactone

Improving the production rate of high-value nutraceutical compounds, such as astaxanthin and polyunsaturated fatty acids (PUFAs), is important for the commercialization of Haematococcus pluvialis biorefineries. Here, the effects of a phytohormone, strigolactone analog rac-GR24, on cell growth and astaxanthin and fatty acid biosynthesis in H. pluvialis were investigated. Four concentrations (2, 4, 6, and 8 µM) of rac-GR24 were initially added during 30 days of photoautotrophic cultivation. The addition of rac-GR24 improved cell number density and chlorophyll concentration in H. pluvialis cultures compared to the control; the optimal concentration was 8 µM. Despite a slightly reduced astaxanthin content of 30-d-old cyst cells, the astaxanthin production (26.1 ± 1.7 mg/L) improved by 21% compared to the rac-GR24-free control (21.6 ± 1.5 mg/L), owing to improved biomass production. Notably, at the highest dosage of 8 µM rac-GR24, the total fatty acid content of the treated H. pluvialis cells (899.8 pg/cell) was higher than that of the untreated cells (762.5 pg/cell), resulting in a significant increase in the total fatty acid production (361.6 ± 48.0 mg/L; 61% improvement over the control). The ratio of PUFAs, such as linoleic (C18:2) and linolenic (C18:3) acids, among total fatty acids was high (41.5–44.6% w/w) regardless of the rac-GR24 dose.

Cell disruption and astaxanthin extraction from Haematococcus pluvialis: Recent advances

The green microalga Haematococcus pluvialis is an excellent source of astaxanthin, a powerful antioxidant widely used in cosmetics, aquaculture, health foods, and pharmaceuticals. This review explores recent developments in cell disruption and astaxanthin extraction techniques applied using H. pluvialis as a model species for large-scale algal biorefinery. Notably, this alga develops a unique cyst-like cell with a rigid three-layered cell wall during astaxanthin accumulation (∼4% of dry weight) under stress. The thick (∼2 µm), acetolysis-resistant cell wall forms the strongest barrier to astaxanthin extraction. Various physical, chemical, and biological cell disruption methods were discussed and compared based on theoretical mechanisms, biomass status (wet, dry, and live), cell-disruption efficacy, astaxanthin extractability, cost, scalability, synergistic combinations, and impact on the stress-sensitive astaxanthin content. The challenges and future prospects of the downstream processes for the sustainable and economic development of advanced H. pluvialis biorefineries are also outlined.