Agricultural Waste-Based Biochar for Agronomic Applications

Liming potential and characteristics of biochar produced from woody and non-woody biomass at different pyrolysis temperatures

Large amount of wastes are burnt or left to decompose on site or at landfills where they cause air pollution and nutrient leaching to groundwater. Waste management strategies that return these food wastes to agricultural soils recover the carbon and nutrients that would otherwise have been lost, enrich soils and improve crop productivity. The incorporation of liming materials can neutralize the protons released, hence reducing soil acidity and its adverse impacts to the soil environment, food security, and human health. Biochar derived from organic residues is becoming a source of carbon input to soil and provides multifunctional values. Biochar can be alkaline in nature, with the level of alkalinity dependent upon the feedstock and processing conditions. This study conducted a characterization of biochar derived from the pyrolysis process of eggplant and Acacia nilotica bark at temperatures of 300 °C and 600 °C. An analysis was conducted on the biochar kinds to determine their pH, phosphorus (P), as well as other elemental composition. The proximate analysis was conducted by the ASTM standard 1762-84, while the surface morphological features were measured using a scanning electron microscope. The biochar derived from Acacia nilotica bark exhibited a greater yield and higher level of fixed carbon while possessing a lower content of ash and volatile components compared to biochar derived from eggplant. The eggplant biochar exhibits a higher liming ability at 600 °C compared to the acacia nilotica bark-derived biochar. The calcium carbonate equivalent, pH, potassium (K), and phosphorus (P) levels in eggplant biochars increased as the pyrolysis temperature increased. The results suggest that biochar derived from eggplant could be a beneficial resource for storing carbon in the soil, as well as for addressing soil acidity and enhancing nutrients availability, particularly potassium and phosphorus in acidic soils.

Persistent effects of swine manure biochar and biogas slurry application on soil nitrogen content and quality of lotus root

Using swine manure biochar and biogas slurry in agriculture proves to be an effective strategy for soil improvement and fertilization. In this study, a pot trial on the growth of lotus root was conducted to investigate the persistent effects of applying 350°C swine manure biochar (1% and 2%) and biogas slurry (50% and 100%) on soil nitrogen nutrient and lotus root quality. The results showed that compared to chemical fertilizer alone (A0B0), swine manure biochar significantly increased soil nitrogen content after one year of application. The contents of total nitrogen (TN), alkali-hydrolyzed nitrogen (AHN), ammonium nitrogen (NH4 +-N), and nitrate nitrogen (N O 3 -   - N ) increased by 17.96% to 20.73%, 14.05% to 64.71%, 17.76% to 48.68% and 2.22% to 8.47%, respectively, during the rooting period. When swine manure biochar was present, the application of biogas slurry further elevated soil nitrogen content. The co-application of swine manure biochar and biogas slurry significantly increased soil nitrogen content, and the 100% nitrogen replacement with biogas slurry combined with 2% swine manure biochar (A2B2) treatment exhibited the most significant enhancement effect during whole plant growth periods. Soil enzyme activities, including soil protease (NPT), leucine aminopeptidase (LAP), b-glucosidase (β-GC) and dehydrogenase (DHA), showed a tendency to increase and then decrease with the prolongation of lotus root fertility period, reaching the maximum value during the rooting period. Compared to A0B0, the treatment with 2% swine manure biochar had the most significant effect on enzyme activities and increased the lotus root's protein, soluble sugar, and starch contents. Nitrate content decreased with the application of 2% swine manure biochar as the amount of biogas slurry increased. In conclusion, swine manure biochar effectively improved soil nitrogen content, enzyme activity, and lotus root quality. Even after one year of application, 2% swine manure biochar had the best enhancement effect.

Unlocking the potential of biochar in the remediation of soils contaminated with heavy metals for sustainable agriculture

Agricultural soils contaminated with heavy metals (HMs) impose a threat to the environmental and to human health. Amendment with biochar could be an eco-friendly and cost-effective option to decrease HMs in contaminated soil. This paper reviews the application of biochar as a soil amendment to immobilise HMs in contaminated soil. We discuss the technologies of its preparation, their specific properties, and effect on the bioavailability of HMs. Biochar stabilises HMs in contaminated soil, enhance the overall quality of the contaminated soil, and significantly reduce HM uptake by plants, making it an option in soil remediation for HM contamination. Biochar enhances the physical (e.g. bulk density, soil structure, water holding capacity), chemical (e.g. cation exchange capacity, pH, nutrient availability, ion exchange, complexes), and biological properties (e.g. microbial abundance, enzymatic activities) of contaminated soil. Biochar also enhances soil fertility, improves plant growth, and reduces the plant availability of HMs. Various field studies have shown that biochar application reduces the bioavailability of HMs from contaminated soil while increasing crop yield. The review highlights the positive effects of biochar by reducing HM bioavailability in contaminated soils. Future work is recommended to ensure that biochars offer a safe and sustainable solution to remediate soils contaminated with HMs.

Aromaticity, polarity, and longevity of biochar derived from disposable bamboo chopsticks waste for environmental application

Transforming disposable bamboo chopstick (DBC) wastes into biochar is an effective way to achieve waste-to-resource conversion. This research focused on the elemental and chemical composition of biochar and revealed how these properties affect biochar performance in real-world applications, particularly with respect to climate change mitigation. This research is aimed at examining the effect of pyrolysis temperature on the aromaticity, polarity, and longevity of DBC biochar. The DBC feedstock was pyrolyzed at different temperatures of 400 °C, 450 °C, 500 °C, and 550 °C with a holding time of 20 min at a constant heating rate of 20 °C min-1. The chemical composition, including carbon (C), hydrogen (H), nitrogen (N), oxygen (O), volatile matter (VM), ash, and fixed carbon (FC) contents, were analyzed. The aromaticity, polarity, and longevity of biochar are presented by the atomic ratios of H/C, O/C, (O + N)/C, and C/N, and these ratios are used to determine the potential of biochar for use in climate change mitigation applications. The findings demonstrated that DBC biochar produced at various pyrolysis temperatures contained C contents ranging from 77.54% to 88.06%, ash contents ranging from 2.62% to 2.99%, and a half-life of over 1000 years (O/C < 0.2). Pyrolysis temperature significantly affected biochar properties, as supported by the results for the FC/ash ratio (>10); the ash, FC, C, and N contents increased with increasing temperature; in contrast, the VM, H, and O contents decreased. The results revealed that DBC wastes are the potential feedstock to produce good-quality biochar that could be applied for environmental purposes. Furthermore, the research demonstrated that the best-performing DBC biochar was produced at 500 °C, which had the highest C content, aromaticity, and longevity and the lowest polarity as represented by the values of O/C, H/C, and (O + N)/C, and this biochar could be applied for climate change mitigation purposes.

Recent advances in biochar amendments for immobilization of heavy metals in an agricultural ecosystem: A systematic review

Over the last several decades, extensive and inefficient use of contemporary technologies has resulted in substantial environmental pollution, predominantly caused by potentially hazardous elements (PTEs), like heavy metals that severely harm living species. To combat the presence of heavy metals (HMs) in the agrarian system, biochar becomes an attractive approach for stabilizing and limiting availability of HMs in soils due to its high surface area, porosity, pH, aromatic structure as well as several functional groups, which mostly rely on the feedstock and pyrolysis temperature. Additionally, agricultural waste-derived biochar is an effective management option to ensure carbon neutrality and circular economy while also addressing social and environmental concerns. Given these diverse parameters, the present systematic evaluation seeks to (i) ascertain the effectiveness of heavy metal immobilization by agro waste-derived biochar; (ii) examine the presence of biochar on soil physico-chemical, and thermal properties, along with microbial diversity; (iii) explore the underlying mechanisms responsible for the reduction in heavy metal concentration; and (iv) possibility of biochar implications to advance circular economy approach. The collection of more than 200 papers catalogues the immobilization efficiency of biochar in agricultural soil and its impacts on soil from multi-angle perspectives. The data gathered suggests that pristine biochar effectively reduced cationic heavy metals (Pb, Cd, Cu, Ni) and Cr mobilization and uptake by plants, whereas modified biochar effectively reduced As in soil and plant systems. However, the exact mechanism underlying is a complex biochar-soil interaction. In addition to successfully immobilizing heavy metals in the soil, the application of biochar improved soil fertility and increased agricultural productivity. However, the lack of knowledge on unfavorable impacts on the agricultural systems, along with discrepancies between the use of biochar and experimental conditions, impeded a thorough understanding on a deeper level.

Assessment of agricultural waste biochars for remediation of degraded water-soil environment: Dissolved organic carbon release and immobilization of impurities in one- or two-adsorbate systems

This paper presents a method of agricultural waste management - the production of two biochars (BC) from potato and raspberry stems. It defines the potential of these materials for remediation of degraded water and soil environments. The performed study included analyses of BC physicochemistry, dissolved organic carbon (DOC) release and ability to immobilize copper (Cu), tetracycline (TC) and carboxin (CB) in one- and two-adsorbate systems. The BCs were obtained with pyrolysis at 600 °C for 30 min in a nitrogen atmosphere. Their DOC was predominantly constituted of substances with large molecular weights and high aromaticity, meaning that both BCs can be safely applied as soil additives. Potato-biochar (P-BC) had a more developed surface than raspberry-biochar (R-BC). The specific surface area (S_BET) of P-BC was 122 m²/g, whilst of R-BC was 87 m²/g. As a result, the efficiency of impurity adsorption in the one-adsorbate systems was higher for P-BC (61.75% for Cu, 73.84% for TC, and 54.43% for CB). In the two-adsorbate systems, organic impurities improved the immobilization of heavy metal ions on BCs. The efficiency of Cu adsorption on P-BC when TC was present was 88.29%. Desorption of Cu from BC was highest using HCl, whilst that of TC and CB was highest using NaOH. Maximum desorption was observed in a two-adsorbate system with TC + CB (up to 63.6% for TC). These results confirmed that potato and raspberry stems can be used to produce highly effective BCs with large application potential, especially for remediation of degraded soils and polluted waters.

Biochar-based compost: a bibliometric and visualization analysis

The co-application of biochar compost as organic amendment for crop production and soil remediation has gained momentum due to their positive effect on plant growth and soil quality improvement. The application of biochar and compost which are green and cost-effective soil remediators would promote the availability and distribution of food, planetary conservation, alleviate poverty, and enhance the attainment of Sustainable Millennium Development Goals (SDGs). A bibliometric analysis was conducted to overview research on biochar compost from 2011 to 2021. Two hundred and fifty-four research papers were retrieved from the Scopus database and analyzed using VOS viewer. Analysis revealed that 217 (85.43%) were articles, 21 (8.27%) were conference papers, and 12 (4.72%) were review papers. The results showed an exponential increase in the number of publications. The most productive countries in the investigated subject were China (49), followed by USA (36), Australia (29), Italy (28), Germany (25), and Indonesia (20). After the search terms, 'soil,' which had links with keywords like 'soil fertility,' 'soil quality,' 'soil pollution,' 'phosphorus,' 'nitrogen,' 'maize,' 'greenhouse gas,' etc., had the highest occurrences (94). From the results of the current hotspot research in the field, the effect of biochar-compost mixture and co-composted biochar on soil remediation is currently being studied by several researchers. Biochar and compost incorporation in soil reduce the uptake of pollutants by plants which consequently increase essential nutrients for plant and soil productivity.

Adsorbents Used for Microcystin Removal from Water Sources: Current Knowledge and Future Prospects

The increasing occurrence of toxic cyanobacteria in water sources, driven by climate change and eutrophication, is of great concern worldwide today. Cyanobacterial blooms can negatively affect water bodies and generate harmful secondary metabolites, namely microcystins (MCs), which significantly impair water quality. Various adsorbents used for MC removal from water sources were assessed in this investigation. Activated carbon constitutes the most widely used adsorbent for treating contaminated waters due to its high affinity for adsorbing MCs. Alternative adsorbents have also been proposed and reported to provide higher efficiency, but the studies carried out so far in this regard are still insufficient. The mechanisms implicated in MC adsorption upon different adsorbents should be further detailed for a better optimization of the adsorption process. Certainly, adsorbent characteristics, water pH and temperature are the main factors influencing the adsorption of MCs. In this context, optimization studies must be performed considering the effectiveness, economic aspects associated with each adsorbent. This review provides guidelines for more practical field applications of the adsorption in the treatment of waters actually contaminated with MCs.

Preliminary Investigation of Possible Biochar Use as Carbon Source in Polyacrylonitrile Electrospun Fiber Production

Electrospinning with consequent thermal treatment consists in a carbon fiber production method that spins a polymer solution to create fibers with diameters around a few hundred nanometers. The thermal treatments are used for the cyclization and then carbonization of the material at 1700 °C for one hour. The unique structure of micro- and nano-carbon fibers makes them a promising material for various applications ranging from future battery designs to filtration. This work investigated the possibility of using milled gasification biochar, derived from a 20 kW fixed-bed gasifier fueled with vine pruning pellets, as an addictive in the preparation of electrospinning solutions. This study outlined that solvent cleaning and the consequent wet-milling and 32 µm sifting are fundamental passages for biochar preparation. Four different polyacrylonitrile-biochar shares were tested ranging from pure polymer to 50–50% solutions. The resulting fibers were analyzed via scanning electron microscopy, and energy-dispersive X-ray and infrared spectroscopy. Results from the morphological analysis showed that biochar grains dispersed themselves well among the fiber mat in all the proposed shares. All the tested solutions, once carbonized, exceeded 97%wt. of carbon content. At higher carbonization temperatures, the inorganic compounds naturally showing in biochar such as potassium and calcium disappeared, resulting in an almost carbon-pure fiber matrix with biochar grains in between.

The Quantity and Composition of Leachate from Hop Plant Biomass during Composting Process

Technology that would result in a high-quality product with minimal environmental impact throughout the on-site composting process of hop biomass after harvest has not yet been developed. It is crucial to introduce composting practices that do not result in a detrimental leachate impact. Three different composting procedures that vary in terms of initial biomass particle size, additives, and pile covering were investigated. Each pile was built from 15 t of fresh hop biomass after harvest (leaves and stems), leachate was collected during the composting season (September to the end of April), and biomass was sampled and analyzed to identify good practices as well as gaps that need to be filled. Leachate quantity differed significantly in terms of the composting procedure and time stamps. There was a strong linear correlation between the amount of precipitation and leachate quantity (0.86), NH4 leached amount (0.87), and total N leached amount (0.92), but not the total P amount. The composting procedure had a significant impact on the quantity of the NH4 leached amount. The majority of the NH4 was lost in the second month of composting. The maturation phase was the most critical for NO3 loss since it had the highest amount of leached NO3 and the greatest variances among the composting protocols. Considering leachate it is recommended that a membrane is used at all times during the maturation phase as well as during any heavy precipitation expected in the thermophilic phase. Whether the cover is also needed for the entire duration of the thermophilic phase (due to emission) is a matter of further research.