Removal of Copper, Nickel, and Zinc Ions from an Aqueous Solution through Electrochemical and Nanofiltration Membrane Processes

Optimization of simultaneous adsorption of nickel, copper, cadmium and zinc from sulfuric solutions using weakly acidic resins

In this research, the adsorption of nickel (Ni), copper (Cu), cadmium (Cd), and zinc (Zn) from real sulfuric leaching solution with weakly acidic resins has been studied using response surface methodology (RSM). The adsorption process on two weakly acidic resins has been investigated as a function of pH, time, temperature, and resin dosage. The experimental results indicate that the amino phosphoric acid resin removed Ni, Cu, Cd, and Zn from an acidic solution very efficiently. Based on the central composite design (CCD) on the RSM, the statistical criteria of correlation coefficient (R2) values of Ni, Cu, Cd, and Zn are 0.9418, 0.9753, 0.9657, and 0.9189, respectively. The adsorption process followed the pseudo-second-order kinetic model and the thermodynamic calculations indicated the chemical interaction between the resin surface and the metal ions. Enthalpy values greater than zero indicate that the adsorption reaction of the metals is endothermic. The optimal adsorption process was carried out at time of 20 min, temperature of 30 0C, pH of 5, and resin dosage of 4 g/L. In these conditions, the adsorption capacity of nickel, copper, cadmium, and zinc were obtained 13.408, 7.087, 4.357, and 15.040 mg/g, respectively.

Bioremoval of heavy metals from aqueous solution using dead biomass of indigenous fungi derived from fertilizer industry effluents: isotherm models evaluation and batch optimization

The present work investigated the utilization of dead biomass of the highly multi-heavy metals tolerant indigenous fungal strain NRCA8 isolated from the mycobiome of fertilizer industry effluents that containing multiple heavy metal ions at high levels to remove Pb2+, Ni2+, Zn2+, and Mn2+ as multiple solutes from multi-metals aqueous solutions for the first time. Based on morphotype, lipotype and genotype characteristics, NRCA8 was identified as Cladosporium sp. NRCA8. The optimal conditions for the bioremoval procedure in the batch system were pH 5.5 for maximum removal (91.30%, 43.25%, and 41.50%) of Pb2+, Zn2+ and Mn2+ but pH 6.0 supported the maximum bioremoval and uptake of Ni2+ (51.60% and 2.42 mg/g) by NRCA8 dead biomass from the multi-metals aqueous solution, respectively. The 30 min run time supported the highest removal efficiency and uptake capacity of all heavy metals under study. Moreover, the equilibrium between the sorbent NRCA8 fungal biomass and sorbates Ni2+, Pb2+ and Zn2+ was attained after increasing the dead biomass dose to 5.0 g/L. Dead NRCA8 biomass was described by scanning electron microscopy, energy-dispersive X-ray spectroscopy and Fourier transform infrared spectrometer before and after biosorption of Pb2+, Ni2+, Zn2+ and Mn2+ under multiple metals system. The Langmuir, Freundlich and Dubinin-Kaganer-Radushkevich isotherms were applied to characterize the adsorption equilibrium between Pb2+, Ni2+, Mn2+ and Zn2+ and the adsorbent NRCA8. By comparing the obtained coefficient of regression (R2) by Freundlich (0.997, 0.723, 0.999, and 0.917), Langmiur (0.974, 0.999, 0.974, and 0.911) and Dubinin-Radushkevich (0.9995, 0.756, 0.9996 and 0.900) isotherms values for Pb2+, Zn2+, Ni2+ and Mn2+ adsorption, respectively, it was found that the isotherms are proper in their own merits in characterization the possible of NRCA8 for removal of Pb2+, Zn2+, Ni2+ and Mn2+. DKR isotherm is the best for Pb2+ and Ni2+ (0.9995 and 0.9996) while Langmiur isotherm giving a good fit to the Zn2+ sorption (0.9990) as well as Freundlich isotherm giving a good fit to the Mn2+ sorption (0.9170). The efficiencies of Cladosporium sp. NRCA8 dead biomass for bioremoval of heavy metals from real wastewater under the optimized conditions were Pb2+, Ag+, Mn2+, Zn2+ and Al3+ ˃ Ni2+ ˃ Cr6+ ˃ Co2+ ˃ Fe3+ ˃ Cu2+ ˃ Cd2+. Dead NRCA8 biomass showed efficient ability to adsorb and reduce harmful components in the industrial effluents to a level acceptable for discharge into the environment.

Multimetal bioremediation from aqueous solution using dead biomass of Mucor sp. NRCC6 derived from detergent manufacturing effluent

Among ten metal-tolerant fungal isolates obtained from the microbiomes of detergent industry effluent, Mucor sp. NRCC6 showed the highest tolerance and an adaptive behavior toward the heavy metals Ni2+, Pb2+, Mn2+, and Zn2+. It gave the highest growth rates 0.790 ± 0.59, 0.832 ± 0.32, 0.774 ± 0.40, and 0.741 ± 1.06 mm/h along with the lowest growth inhibition 9.19, 4.37, 11.04, and 14.83% in the presence of Pb2+, Zn2+, Ni2+, and Mn2+, respectively, at a concentration of 5.0 g/L. Then, Mucor sp. NRCC6 was selected as a biotrap for the removal of these heavy metals. The optimized operating conditions were detected to be pH 6.0 for Pb2+, Zn2+, and Mn2+ and pH 5.5 for Ni2+ at 30 °C; agitation speed 150 rpm; contact time 30 min for Mn2+ and Ni2+, 30-60 min for Pb2+, and 90-180 min for Zn2+; NRCC6 biomass dosage 5.0 g/L for Ni2+ and Pb2+ and 10.0 g/L for Mn2+ and Zn2+; and initial concentration 12 mg/L of each ion in the multimetal aqueous solutions. Under these optimized conditions, the adsorption capacity for Pb2+, Ni2+, Mn2+, and Zn2+ reached 98.75, 59.25, 58.33, and 50.83%. The Langmuir isotherm was the best for describing the adsorption of Zn2+ (0.970) and Mn2+ (0.977). The Freundlich isotherm significantly giving a good fit to the adsorption of Pb2+ (0.998) while the adsorption of Ni2+ onto NRCC6 biomass can follow DKR (0.998). Furthermore, the current study revealed that Mucor sp. NRCC6 fungus is a new efficient and eco-friendly method that revealed a maximum removal of 100% for Pb2+ and Zn2+ as well as 97.39, 88.70, 78.95, 74.0, 70.22, 68.57, and 60.0% for Ni2+, Mn2+, Cd2+, Cu2+, Fe3+, As2+, and Cr6+ from the industrial wastewater, respectively.

Circular Economy Approach in Treatment of Galvanic Wastewater Employing Membrane Processes

According to the idea of sustainable development, humanity should make every effort to care for the natural environment along with economic development. Decreasing water resources in the world makes it necessary to take action to reduce the consumption of this resource. This article presents the results of research conducted to improve the use of recyclable materials in line with the circular economy model. The research focused on the development of a technological solution for the recovery of raw materials from galvanic wastewater. The concept of a galvanic wastewater treatment system presented in the article includes wastewater pre-treatment in the ultrafiltration (UF) process and water recovery in the reverse osmosis (RO) process. In addition, the purpose of the work was to manage post-filtration waste (RO retentate) containing high concentrations of zinc in the process of galvanizing metal details. The obtained results indicate that it is possible to reduce the amount of sewage from the galvanizing industry by reusing the recovered water as technical water in the process line. The carried-out model tests of galvanizing confirmed the possibility of using RO retentate for the production of metal parts. The achieved results are a proposal to solve the problem of reducing the impact of galvanic wastewater on the environment and to improve the profitability of existing galvanizing technologies by reducing the consumption of water and raw materials.

Recovery of Metals from Wastewater-State-of-the-Art Solutions with the Support of Membrane Technology

This paper discusses the most important research trends in the recovery of metals from industrial wastewater using membrane techniques in recent years. Particular attention is paid to the preparation of new membranes with the required filtration and separation properties. At the same time, possible future applications are highlighted. The aspects discussed are divided into metals in order to clearly and comprehensibly list the most optimal solutions depending on the composition of the wastewater and the possibility of recovering valuable components (metalloids, heavy metals, and platinum group metals). It is shown that it is possible to effectively remove metals from industrial wastewater by appropriate membrane preparation (up to ~100%), including the incorporation of functional groups, nanoparticles on the membrane surface. However, it is also worth noting the development of hybrid techniques, in which membrane techniques are one of the elements of an effective purification procedure.

Unravelling the emerging carcinogenic contaminants from industrial waste water for prospective remediation by electrocoagulation - A review

The need of the hour relies on finding new but sustainable ways to curb rising pollution levels. The accelerated levels of urbanization and increase in population deplete the finite resources essential for human sustenance. In this aspect, water is one of the non-renewable sources that is running out very fast and is polluted drastically day by day. One way of tackling the problem is to reduce the pollution levels by decreasing the usage of chemicals in the process, and the other is to find ways to reuse or reduce the contaminants in the effluent by treatment methods. Most of the available water recycling or treatment methods are not sustainable. Some of them even use toxic chemicals in the processing steps. Treatment of organic wastes from industries is a challenging task as they are hard to remove. Electrocoagulation is one of the emerging water treatment technologies that is highly sustainable and has a comparatively cheaper operating cost. Being a broad-spectrum treatment process, it is suitable for treating the most common water pollutants ranging from oils, bacteria, heavy metals, and others. The process is also straightforward, where electrical current is used to coagulate the contaminates. The presence of carcinogens in these waste water increases the need for its treatment towards further use. The present investigation is made as an extensive analysis of the emerging carcinogens and their various sources from process industries, especially in the form of organic waste and their removal by electrocoagulation and its coupled techniques. The paper also aims to ascertain why the electrocoagulation technique may be a better alternative compared with other methods for the removal of carcinogens in organic wastewater, an analysis which has not been explored before.

A review on biofiltration techniques: Recent advancements in the removal of volatile organic compounds and heavy metals in the treatment of polluted water

Good quality of water determines the healthy life of living beings on this earth. The cleanliness of water was interrupted by the pollutants emerging out of several human activities. Industrialization, urbanization, heavy population, and improper disposal of wastes are found to be the major reasons for the contamination of water. Globally, the inclusion of volatile organic compounds (VOCs) and heavy metals released by manufacturing industries, pharmaceuticals, and petrochemical processes have created environmental issues. The toxic nature of these pollutants has led researchers, scientists, and industries to exhibit concern towards the complete eradication of them. In this scenario, the development of wastewater treatment methodologies at low cost and in an eco-friendly way had gained importance at the international level. Recently, bio-based technologies were considered for environmental remedies. Biofiltration based works have shown a significant result for the removal of volatile organic compounds and heavy metals in the treatment of wastewater. This was done with several biological sources such as bacteria, fungi, algae, plants, yeasts, etc. The biofiltration technique is cost-effective, simple, biocompatible, sustainable, and eco-friendly compared to conventional techniques. This review article provides deep insight into biofiltration technologies engaged in the removal of volatile organic compounds and heavy metals in the wastewater treatment process.