Structure and Photoelectrical Properties of Natural Photoactive Dyes for Solar Cells

Unveiling the potential of graphene and S-doped graphene nanostructures for toxic gas sensing and solar sensitizer cell devices: insights from DFT calculations

CONTEXT

In this work, we explore the potential of 2D materials, particularly graphene and its derivatives, for eco-friendly electricity generation and air pollution reduction. Leveraging the significant surface area of graphene nanomaterials, the susceptibility of these graphene-based nanostructures to hazardous substances and their applicability in clean solar cell (SSC) devices were systematically investigated using density functional theory (DFT), as implemented within Gaussian 5.0 code. Time-dependent DFT (TD-DFT) was employed to characterize the UV-visible spectrum of unstrained nanostructures. Herein, we considered three potentially harmful gases-CO, NH3, and Br2. Adsorption calculations revealed a notable interaction between the pure graphene nanostructure and Br2 gas, while the S-doped counterpart exhibited reduced interaction. Saturated S-doped nanostructures demonstrated an enhanced affinity for NH3 and CO gases compared to their pure S-doped counterparts, attributed to the sulfur (S) atom facilitating gas molecule binding to the nanostructure's surface. Furthermore, simulations of the SSC device architecture indicated the superior performance of the pure graphene nanostructure in terms of light-harvesting efficiency, injection energy, and electron injection into the lower conduction band of CBM titanium dioxide (TiO2). These findings suggest a potential avenue for developing nanostructures tailored for SSC devices and gas sensors, offering a dual solution to address air pollution concerns.

METHODS

Density function theory was used to compute the ground and excited state properties for pure and sulfur-doped graphene nanostructures. The hybrid function B3LYP with a 6-31G* basis set was utilized to describe the exchange correlation. Gauss Sum 2.2 software is used to estimate the density of state (DOS) for all structures under investigation.

Natural sensitizer extracted from Mussaenda erythrophylla for dye-sensitized solar cell

In this study, a natural dye from the flowers of Mussaenda erythrophylla extracted separately in ethanol and de-ionized water was employed as a photosensitizer in DSSCs. The quantitative phytochemical analyses were performed on both extracts. The existence of flavonoids (anthocyanin) and chlorophyll a pigments in the ethanol extract of the dye was confirmed by the UV-Visible spectroscopy. The stability study performed on the said ethanol extract confirmed that the dye extracted in ethanol was stable in the dark and did not degrade for nearly 50 days. The presence of the dye molecules and uniform adsorption of them on the P25-TiO2 surface were confirmed by fourier transform infrared spectroscopy and atomic force microscopy, respectively. Moreover, the influence of dye concentration and pH on the optical properties of the dye was also studied. The natural dye extracted in ethanol was employed in DSSCs, fabricated by utilizing the said dye sensitized P25-TiO2 photoanodes, [Formula: see text]/[Formula: see text] electrolyte, and Pt counter electrode. Photovoltaic performances of the fabricated devices were determined under simulated irradiation with the intensity of 100 mWcm-2 using AM 1.5 filter. The device fabricated with the P25-TiO2 photoanode sensitized by the dye extracted in ethanol at pH = 5 exhibited the best power conversion efficiency (PCE) of 0.41% with the JSC of 0.98 mAcm-2 which could be attributed to the optimum light absorption in the visible region of solar spectrum by the chlorophyll a and anthocyanin molecules in the extracted natural dye.

Experimental Investigation on the Performances of Innovative PV Vertical Structures

The sustainable development of our planet is considerably related to a relevant reduction of CO2 global emissions, with building consumption contributing more than 40%. In this scenario, new technological conceptions, such as building-integrated photovoltaic technology, emerged in order to satisfy the requirements of sustainability imposed by the European Union. Therefore, the aim of this work is to provide a technical and economical comparison of the performances of different vertical-mounted innovative photovoltaic systems, potentially integrated on a building instead of on traditional windows or glass walls. The proposed investigation was carried out by means of experimental tests on three different next-generation vertical structures. The related results are described and discussed, highlighting the advantages and the drawbacks of the proposed technologies.

Optimizing a Simple Natural Dye Production Method for Dye-Sensitized Solar Cells: Examples for Betalain (Bougainvillea and Beetroot Extracts) and Anthocyanin Dyes

We present a study about the sensitizers extracted from natural resources. This paper focuses on how to select, extract and characterize natural dyes, giving some guides to establish a protocol for the whole process of fabricating and using these dyes. The influence of the extraction solvent and method, and of parameters such as pH are analyzed. Also, dye precursor and dye extract stability have been studied, as well as how the dye adsorbs onto substrates and the effect of mixing or concentrating the extracts. Results concerning betalain pigments present in bougainvillea and beetroot extracts, and anthocyanins in eggplant extracts, analyzed by using UV-Vis spectrometry, are included. As an example of application, we report procedures intended to test and enhance the dye potential as a main component of dye-sensitized solar cells (DSSCs). DSSCs mimic nature’s photosynthesis and have some advantages like an easy and low-cost fabrication procedure. Their efficiency depends on its design and fabrication process and also on the different components involved. Hence, optimizing each component is essential to achieve the best performance, and thus the dye used as a sensitizer is crucial. We fabricate cells by using a simple procedure: As the interest is focused on the sensitizer, the same consecutive steps are followed, varying only the dye extract. Among all the natural-dyes tested, beetroot extract reaches up to 0.47% cell efficiency, which is near the highest values found in literature for this pigment.

Laser Sintering of TiO2 Films for Flexible Dye-Sensitized Solar Cells

In this study, laser sintering of TiO2 nanoparticle films on plastic substrates was conducted in order to improve the incident photon-to-electron conversion efficiency (IPCE) of flexible dye-sensitized solar cells (DSCs). Lasers with different wavelengths (355 nm and 1064 nm) were used to process the TiO2 electrodes. With an optimized processing parameter combination, the 1064 nm laser can sinter 13 μm thick TiO2 films uniformly, but the uniform sintering cannot be achieved by the 355nm ultraviolet (UV) laser, since the films possess a high absorption ratio at 355 nm. The experimental results demonstrate that the near-infrared laser sintering can enhance the electrical connection between TiO2 nanoparticles without destroying the flexible plastic substrate, reduce the transmission impedance of electrons and increase the absorption rate of incident light. Furthermore, the charge collection efficiency, fill factor, and short-circuit current have all been improved to some extent, and the solar conversion efficiency increased from 4.6% to 5.7%, with an efficiency enhancement reaching 23.9%.