A State-of-the-Art Review on Robots and Medical Devices Using Smart Fluids and Shape Memory Alloys

Thermal Conductivity and Temperature Dependency of Magnetorheological Fluids and Application Systems-A Chronological Review

Many studies on magnetorheological fluid (MRF) have been carried out over the last three decades, highlighting several salient advantages, such as a fast phase change, easy control of the yield stress, and so forth. In particular, several review articles of MRF technology have been reported over the last two decades, summarizing the development of MRFs and their applications. As specific examples, review articles have been published that include the optimization of the particles and carrier liquid to achieve minimum off-state viscosity and maximum yield stress at on-state, the formulation of many constitutive models including the Casson model and the Herschel-Bulkley (H-B) model, sedimentation enhancement using additives and nanosized particles, many types of dampers for automotive suspension and civil structures, medical and rehabilitation devices, MRF polishing technology, the methods of magnetic circuit design, and the synthesis of various controllers. More recently, the effect of the temperature and thermal conductivity on the properties of MRFs and application systems are actively being investigated by several works. However, there is no review article on this issue so far, despite the fact that the thermal problem is one of the most crucial factors to be seriously considered for the development of advanced MRFs and commercial products of application systems. In this work, studies on the thermal conductivity and temperature in MRFs themselves and their temperature-dependent application systems are reviewed, respectively, and principal results are summarized, emphasizing the following: how to reduce the temperature effect on the field-dependent properties of MRFs and how to design an application system that minimizes the thermal effect. It is noted here that the review summary is organized in a chronological format using tables.

A hydraulic soft microgripper for biological studies

We have developed a microscale hydraulic soft gripper and demonstrated the handling of an insect without damage. This gripper is built on Polydimethylsiloxane (PDMS) with the soft material casting technique to form three finger-like columns, which are placed on a circular membrane. The fingers have a length of 1.5 mm and a diameter of 300 µm each; the distance between the two fingers is 600 µm of center-to-center distance. A membrane as a 150 µm soft film is built on top of a cylindrical hollow space. Applying pressure to the interior space can bend the membrane. Bending the membrane causes the motion of opening/closing of the gripper, and as a result, the three fingers can grip an object or release it. The PDMS was characterized, and the experimental results were used later in Abaqus software to simulate the gripping motion. The range of deformation of the gripper was investigated by simulation and experiment. The result of the simulation agrees with the experiments. The maximum 543 µN force was measured for this microfluidic-compatible microgripper and it could lift a ball that weighs 168.4 mg and has a 0.5 mm diameter. Using this microgripper, an ant was manipulated successfully without any damage. Results showed fabricated device has great a potential as micro/bio manipulator.

Sedimentation Stability of Magnetorheological Fluids: The State of the Art and Challenging Issues

Among the many factors causing particle sedimentation, three principal ingredients are heavily involved: magnetic particles, a carrier liquid (base oil), and additives (surfactant). Therefore, many works have been carried out to improve the sedimentation stability of magnetorheological fluids (MRFs) by adopting the three methods. In the particle modification stage, the weight concentration, size distribution, particle shape, coated materials, and combinations of different sizes of the particles have been proposed, while for the modification of the carrier liquid, several works on the density increment, wettability control, and the use of natural oils, lubricant oil, grease, and ethyl- and butyl-acetate oils have been undertaken. Recently, in certain recipes to improve sedimentation stability, some additives such as aluminum stearate were used to increase the redispersibility of the aggregated particles. In addition, several works using more than two recipes modifying both the particles and base oils are being actively carried out to achieve higher sedimentation stability. This review article comprehensively introduces and discuses the recipes to improve sedimentation stability from the aspects of the three ingredients. A few conceptual methodologies to prevent the sedimentation occurring via a bottle's storage on the shelves of the application systems are also presented, since, to the author's knowledge, there has not been a report on this issue. These are challenging works to be explored and developed for successful application systems' MRFs.

Shape Memory Alloy-Based Wearables: A Review, and Conceptual Frameworks on HCI and HRI in Industry 4.0

Ever since its discovery, the applications of Shape Memory Alloys (SMA) can be found across a range of application domains, from structural design to medical technology. This is based upon the unique and inherent characteristics such as thermal Shape Memory Effect (SME) and Superelasticity (or Pseudoelasticity). While thermal SME is used for shape morphing applications wherein temperature change can govern the shape and dimension of the SMA, Superelasticity allows the alloy to withstand a comparatively very high magnitude of loads without undergoing plastic deformation at higher temperatures. These unique properties in wearables have revolutionized the field, and from fabrics to exoskeletons, SMA has found its place in robotics and cobotics. This review article focuses on the most recent research work in the field of SMA-based smart wearables paired with robotic applications for human-robot interaction. The literature is categorized based on SMA property incorporated and on actuator or sensor-based concept. Further, use-cases or conceptual frameworks for SMA fiber in fabric for 'Smart Jacket' and SMA springs in the shoe soles for 'Smart Shoes' are proposed. The conceptual frameworks are built upon existing technologies; however, their utility in a smart factory concept is emphasized, and algorithms to achieve the same are proposed. The integration of the two concepts with the Industrial Internet of Things (IIoT) is discussed, specifically regarding minimizing hazards for the worker/user in Industry 5.0. The article aims to propel a discussion regarding the multi-faceted applications of SMAs in human-robot interaction and Industry 5.0. Furthermore, the challenges and the limitations of the smart alloy and the technological barriers restricting the growth of SMA applications in the field of smart wearables are observed and elaborated.

Human Lower Limb Joint Biomechanics in Daily Life Activities: A Literature Based Requirement Analysis for Anthropomorphic Robot Design

Daily human activity is characterized by a broad variety of movement tasks. This work summarizes the sagittal hip, knee, and ankle joint biomechanics for a broad range of daily movements, based on previously published literature, to identify requirements for robotic design. Maximum joint power, moment, angular velocity, and angular acceleration, as well as the movement-related range of motion and the mean absolute power were extracted, compared, and analyzed for essential and sportive movement tasks. We found that the full human range of motion is required to mimic human like performance and versatility. In general, sportive movements were found to exhibit the highest joint requirements in angular velocity, angular acceleration, moment, power, and mean absolute power. However, at the hip, essential movements, such as recovery, had comparable or even higher requirements. Further, we found that the moment and power demands were generally higher in stance, while the angular velocity and angular acceleration were mostly higher or equal in swing compared to stance for locomotion tasks. The extracted requirements provide a novel comprehensive overview that can help with the dimensioning of actuators enabling tailored assistance or rehabilitation for wearable lower limb robots, and to achieve essential, sportive or augmented performances that exceed natural human capabilities with humanoid robots.

Synergizing microfluidics with soft robotics: A perspective on miniaturization and future directions

Soft robotics has gone through a decade of tremendous progress in advancing both fundamentals and technologies. It has also seen a wide range of applications such as surgery assistance, handling of delicate foods, and wearable assistive systems driven by its soft nature that is more human friendly than traditional hard robotics. The rapid growth of soft robotics introduces many challenges, which vary with applications. Common challenges include the availability of soft materials for realizing different functions and the precision and speed of control required for actuation. In the context of wearable systems, miniaturization appears to be an additional hurdle to be overcome in order to develop truly impactful systems with a high user acceptance. Microfluidics as a field of research has gone through more than two decades of intense and focused research resulting in many fundamental theories and practical tools that have the potentials to be applied synergistically to soft robotics toward miniaturization. This perspective aims to introduce the potential synergy between microfluidics and soft robotics as a research topic and suggest future directions that could leverage the advantages of the two fields.

Application of reduced graphene oxide-based actuators for real-time chemical sensing of liquid and vapour phase contaminants

The possibility of employing responsive materials for the in situ detection of chemical contaminants in the liquid phase is demonstrated here.

Magnetorheology: a review

Magnetic Soft Matter is a rapidly evolving discipline with fundamental and practical interest. This is due to the fact that its physical properties can be easily controlled through external magnetic fields. In this review paper, we revisit the most recent progress in the field (since 2010) emphasizing the rheological properties of these fascinating materials. New formulations and flow kinematics are discussed. Also, new members are integrated into the long-lived magnetorheology family and suggestions are provided for future development.

Biomedical soft robots: current status and perspective

This paper reviews the current status of soft robots in biomedical field. Soft robots are made of materials that have comparable modulus of elasticity to that of biological systems. Several advantages of soft robots over rigid robots are safe human interaction, ease of adaptation with wearable electronics and simpler gripping. We review design factors of soft robots including modeling, controls, actuation, fabrication and application, as well as their limitations and future work. For modeling, we survey kinematic, multibody and numerical finite element methods. Finite element methods are better suited for the analysis of soft robots, since they can accurately model nonlinearities in geometry and materials. However, their real-time integration with controls is challenging. We categorize the controls of soft robots as model-based and model-free. Model-free controllers do not rely on an explicit analytical or numerical model of the soft robot to perform actuation. Actuation is the ability to exert a force using actuators such as shape memory alloys, fluid gels, elastomers and piezoelectrics. Nonlinear geometry and materials of soft robots restrict using conventional rigid body controls. The fabrication techniques used for soft robots differ significantly from that of rigid robots. We survey a wide range of techniques used for fabrication of soft robots from simple molding to more advanced additive manufacturing methods such as 3D printing. We discuss the applications and limitations of biomedical soft robots covering aspects such as functionality, ease of use and cost. The paper concludes with the future discoveries in the emerging field of soft robots.

Materials as Machines

Machines are systems that harness input power to extend or advance function. Fundamentally, machines are based on the integration of materials with mechanisms to accomplish tasks-such as generating motion or lifting an object. An emerging research paradigm is the design, synthesis, and integration of responsive materials within or as machines. Herein, a particular focus is the integration of responsive materials to enable robotic (machine) functions such as gripping, lifting, or motility (walking, crawling, swimming, and flying). Key functional considerations of responsive materials in machine implementations are response time, cyclability (frequency and ruggedness), sizing, payload capacity, amenability to mechanical programming, performance in extreme environments, and autonomy. This review summarizes the material transformation mechanisms, mechanical design, and robotic integration of responsive materials including shape memory alloys (SMAs), piezoelectrics, dielectric elastomer actuators (DEAs), ionic electroactive polymers (IEAPs), pneumatics and hydraulics systems, shape memory polymers (SMPs), hydrogels, and liquid crystalline elastomers (LCEs) and networks (LCNs). Structural and geometrical fabrication of these materials as wires, coils, films, tubes, cones, unimorphs, bimorphs, and printed elements enables differentiated mechanical responses and consistently enables and extends functional use.

Unstructured Uncertainty Based Modeling and Robust Stability Analysis of Textile-Reinforced Composites with Embedded Shape Memory Alloys

This paper develops the mathematical modeling and deflection control of a textile-reinforced composite integrated with shape memory actuators. The mathematical model of the system is derived using the identification method and an unstructured uncertainty approach. Based on this model and a robust stability analysis, a robust proportional–integral controller is designed for controlling the deflection of the composite. We showed that the robust controller depends significantly on the modeling of the uncertainty. The performance of the proposed controller is compared with a classical one through experimental analysis. Experimental results show that the proposed controller has a better performance as it reduces the overshoot and provide robustness to uncertainty. Due to the robust design, the controller also has a wide operating range, which is advantageous for practical applications.