A Feasibility Study of a Novel Piezo MEMS Tweezer for Soft Materials Characterization

Elasto-Kinematics and Instantaneous Invariants of Compliant Mechanisms Based on Flexure Hinges

The kinematic synthesis of compliant mechanisms based on flexure hinges is not an easy task. A commonly used method is the equivalent rigid model, which involves replacing the flexure hinges with rigid bars connected with lumped hinges using the already known methods of synthesis. This way, albeit simpler, hides some interesting issues. This paper addresses the elasto-kinematics and instantaneous invariants of flexure hinges with a direct approach, making use of a nonlinear model to predict their behaviour. The differential equations that govern the nonlinear geometric response are given in a comprehensive form and are solved for flexure hinges with constant sections. The solution to the nonlinear model is then used to obtain an analytical description of two instantaneous invariants: the centre of instantaneous rotation (c.i.r.) and the inflection circle. The main result is that the c.i.r. evolution, namely the fixed polode, is not conservative but is loading-path dependent. Consequently, all other instantaneous invariants are loading-path dependent, and the property of instantaneous geometric invariants (independent of the motion time law) can no longer be used. This result is analytically and numerically evidenced. In other words, it is shown that a careful kinematic synthesis of compliant mechanisms cannot be addressed by only considering the kinematics as rigid mechanisms, and it is essential to take into consideration the applied loads and their histories.

Novel Electrothermal Microgrippers Based on a Rotary Actuator System

Microgrippers are devices that have found applications in various fields of research and industry. They are driven by various actuation methods. In this article, an electrothermal rotary actuator recently proposed in the literature is explored to obtain a novel microgripper design (Model 1). In addition, the use of the rotary actuator as part of the chevron actuated microgrippers (Model 2) is also discussed. The theoretical analysis of the rotary actuator is supported by an equivalent U-shaped-like microactuator. The small error values validate the approximation used. Numerical modeling is performed with ANSYS^TM (Student version 2022, ANSYS, PA, USA). A comparison of theoretical and numerical results provides acceptable error values. The total inter-jaw displacement values obtained for models 1 and 2 are 12.28 μm and 21.2 μm, respectively, and the reaction force is 8.96 μN and 34.2 μN, respectively. The performance parameters of both microgrippers could make their use feasible for different nanoapplications. Model 2 can be used when higher force and displacement are required.

A Piezoelectric MEMS Microgripper for Arbitrary XY Trajectory

In this paper, a piezoelectric microgripper for arbitrary 2D trajectory is proposed. The desired trajectory of the specimen under consideration was obtained by the deformability of a structure consisting of 16 straight beams and 12 C-structures. The mechanical action that deforms the structure was obtained by an electrical voltage supplied to piezoelectric plates. In order to verify the proposed model a FEM software (COMSOL) was used and some of the most commonly used trajectories for medical applications, micropositioning, micro-object manipulation, etc., were examined. The results showed that the proposed microgripper was capable of generating any parametrizable trajectory. Parametric studies were also carried out by examining the most relevant parameters highlighting their influence on specimen trajectories.

A Cantilever-Based Piezoelectric MEMS for Arbitrary XY Path Generation

This work pertains to the design of a cantilever-based piezoelectric MEMS device that is capable of generating arbitrary paths of its tip. The conceived device consists of a pair of rigidly coupled piezoelectric bimorph cantilevers, and a theoretical model is developed for the analytical evaluation of the proper voltage distribution to be supplied to the inner and outer electrodes of each piezoelectric actuator, in order to drive the tip along any desired trajectory. Such a device could be appealing in some microsurgical operations, i.e., the unclogging of arteries, endoluminal treatment of obstructive lesions, but also as a 2D micropositioning stage, etc. Theoretical predictions of voltage versus time that allow several pathways such as circles, ellipses, spirals, etc., to be accomplished have been verified with multiphysics FEM simulations and the numerical outcomes seem to corroborate the proposed model.

Engineering-Aided Inventive Surgery

This Editorial presents a new Special Issue dedicated to some old and new interdisciplinary areas of cooperation between engineering and surgery. The first two sections offer some food for thought, in terms of a brief introductory and general review of the past, present, future and visionary perspectives of the synergy between engineering and surgery. The last section presents a very short and reasoned review of the contributions that have been included in the present Special Issue. Given the vastness of the topic that this Special Issue deals with, we hope that our effort may have offered a stimulus, albeit small, to the development of cooperation between engineering and surgery.