A Comparative Study of PSO-ANN, GA-ANN, ICA-ANN, and ABC-ANN in Estimating the Heating Load of Buildings’ Energy Efficiency for Smart City Planning

Land subsidence prediction in coal mining using machine learning models and optimization techniques

Land surface subsidence is an environmental hazard resulting from the extraction of underground resources. In underground mining, when mineral materials are extracted deep within the ground, the emptying or caving of the mined spaces leads to vertical displacement of the ground, known as subsidence. This subsidence can extend to the surface as trough subsidence, as the movement and deformation of the hanging-wall rocks of the mining stope propagate upwards. Accurately predicting subsidence is crucial for estimating damage and protecting surface buildings and structures in mining areas. Therefore, developing a model that considers all relevant parameters for subsidence estimation is essential. In this article, we discuss the prediction of land subsidence caused by the caving of a stop's roof, focusing on coal mining using the longwall method. The main aim of this research is to improve the accuracy of prediction models of land subsidence due to mining. For this purpose, we consider a total of 11 parameters related to coal mining, including mining thickness and depth (related to the deposit), as well as density, cohesion, internal friction angle, elasticity modulus, bulk modulus, shear modulus, Poisson's ratio, uniaxial compressive strength, and tensile strength (related to the overburden). We utilize information collected from 14 coal mines regarding mining and subsidence to achieve this. We then explore the prediction of subsidence caused by mining using the gene expression programming (GEP) algorithm, optimized through a combination of the artificial bee colony (ABC) and ant lion optimizer (ALO) algorithms. Modeling results demonstrate that combining the GEP algorithm with optimization based on the ABC algorithm yields the best subsidence prediction, achieving a correlation coefficient of 0.96. Furthermore, sensitivity analysis reveals that mining depth and density have the greatest and least effects, respectively, on land surface subsidence resulting from coal mining using the longwall method.

Early energy performance analysis of smart buildings by consolidated artificial neural network paradigms

The assessment of energy performance in smart buildings has emerged as a prominent area of research driven by the increasing energy consumption trends worldwide. Analyzing the attributes of buildings using optimized machine learning models has been a highly effective approach for estimating the cooling load (CL) and heating load (HL) of the buildings. In this study, an artificial neural network (ANN) is used as the basic predictor that undergoes optimization using five metaheuristic algorithms, namely coati optimization algorithm (COA), gazelle optimization algorithm (GOA), incomprehensible but intelligible-in-time logics (IbIL), osprey optimization algorithm (OOA), and sooty tern optimization algorithm (STOA) to predict the CL and HL of a residential building. The models are trained and tested via an Energy Efficiency dataset (downloaded from UCI Repository). A score-based ranking system is built upon three accuracy evaluators including mean absolute percentage error (MAPE), root mean square error (RMSE), and percentage-Pearson correlation coefficient (PPCC) to compare the prediction accuracy of the models. Referring to the results, all models demonstrated high accuracy (e.g., PPCCs >89%) for predicting both CL and HL. However, the calculated final scores of the models (43, 20, 39, 38, and 10 in HL prediction and 36, 20, 42, 42, and 10 in CL prediction for the STOA, OOA, IbIL, GOA, and COA, respectively) indicated that the GOA, IbIL, and STOA perform better than COA and OOA. Moreover, a comparison with various algorithms used in earlier literature showed that the GOA, IbIL, and STOA provide a more accurate solution. Therefore, the use of ANN optimized by these three algorithms is recommended for practical early forecast of energy performance in buildings and optimizing the design of energy systems.

Hybrid parameters for fluid identification using an enhanced quantum neural network in a tight reservoir

This paper proposes a fluid classifier for a tight reservoir using a quantum neural network (QNN). It is difficult to identify the fluid in tight reservoirs, and the manual interpretation of logging data, which is an important means to identify the fluid properties, has the disadvantages of a low recognition rate and non-intelligence, and an intelligent algorithm can better identify the fluid. For tight reservoirs, the logging response characteristics of different fluid properties and the sensitivity and relevance of well log parameter and rock physics parameters to fluid identification are analyzed, and different sets of input parameters for fluid identification are constructed. On the basis of quantum neural networks, a new method for combining sample quantum state descriptions, sensitivity analysis of input parameters, and wavelet activation functions for optimization is proposed. The results of identifying the dry layer, gas layer, and gas-water co-layer in the tight reservoir in the Sichuan Basin of China show that different input parameters and activation functions affect recognition performance. The proposed quantum neural network based on hybrid parameters and a wavelet activation function has higher fluid identification accuracy than the original quantum neural network model, indicating that this method is effective and warrants promotion and application.

Evolutionary Computing for the Radiative-Convective Heat Transfer of a Wetted Wavy Fin Using a Genetic Algorithm-Based Neural Network

Evolutionary algorithms are a large class of optimization techniques inspired by the ideas of natural selection, and can be employed to address challenging problems. These algorithms iteratively evolve populations using crossover, which combines genetic information from two parent solutions, and mutation, which adds random changes. This iterative process tends to produce effective solutions. Inspired by this, the current study presents the results of thermal variation on the surface of a wetted wavy fin using a genetic algorithm in the context of parameter estimation for artificial neural network models. The physical features of convective and radiative heat transfer during wet surface conditions are also considered to develop the model. The highly nonlinear governing ordinary differential equation of the proposed fin problem is transmuted into a dimensionless equation. The graphical outcomes of the aspects of the thermal profile are demonstrated for specific non-dimensional variables. The primary observation of the current study is a decrease in temperature profile with a rise in wet parameters and convective-conductive parameters. The implemented genetic algorithm offers a powerful optimization technique that can effectively tune the parameters of the artificial neural network, leading to an enhanced predictive accuracy and convergence with the numerically obtained solution.

The High-Efficiency Design Method for Capacitive MEMS Accelerometer

In this research, a high-efficiency design method of the capacitive MEMS accelerometer is proposed. As the MEMS accelerometer has high precision and a compact structure, much research has been carried out, which mainly focused on the structural design and materials selection. To overcome the inconvenience and inaccuracy of the traditional design method, an orthogonal design and the particle swarm optimization (PSO) algorithm are introduced to improve the design efficiency. The whole process includes a finite element method (FEM) simulation, high-efficiency design, and verification. Through the theoretical analysis, the working mechanism of capacitive MEMS accelerometer is clear. Based on the comparison among the sweep calculation results of these parameters in the FEM software, four representative structural parameters are selected for further study, and they are le, nf, lf and wPM, respectively. le and lf are the length of the sensing electrode and fixed electrode on the right. nf is the number of electrode pairs, and wPM is the width of the mass block. Then, in order to reduce computation, an orthogonal design is adopted and finally, 81 experimental groups are produced. Sensitivity SV and mass Ma are defined as evaluation parameters, and structural parameters of experimental groups are imported into the FEM software to obtain the corresponding calculation results. These simulation data are imported into neural networks with the PSO algorithm. For a comprehensively accurate examination, three cases are used to verify our design method, and every case endows the performance parameters with different weights and expected values. The corresponding structural parameters of each case are given out after 24 iterations. Finally, the maximum calculation errors of SV and Ma are 1.2941% and 0.1335%, respectively, proving the feasibility of the high-efficiency design method.

Integrative soft computing approaches for optimizing thermal energy performance in residential buildings

As is known, early prediction of thermal load in buildings can give valuable insight to engineers and energy experts in order to optimize the building design. Although different machine learning models have been promisingly employed for this problem, newer sophisticated techniques still require proper attention. This study aims at introducing novel hybrid algorithms for estimating building thermal load. The predictive models are artificial neural networks exposed to five optimizer algorithms, namely Archimedes optimization algorithm (AOA), Beluga whale optimization (BWO), forensic-based investigation (FBI), snake optimizer (SO), and transient search algorithm (TSO), for attaining optimal trainings. These five integrations aim at predicting the annual thermal energy demand. The accuracy of the models is broadly assessed using mean absolute percentage error (MAPE), root mean square error (RMSE), and coefficient of determination (R2) indicators and a ranking system is accordingly developed. As the MAPE and R2 reported, all obtained relative errors were below 5% and correlations were above 92% which confirm the general acceptability of the results and all used models. While the models exhibited different performances in training and testing stages, referring to the overall results, the BWO emerged as the most accurate algorithm, followed by the AOA and SO simultaneously in the second position, the FBI as the third, and TSO as the fourth accurate model. Mean absolute error (MAPE) and Considering the wide variety of artificial intelligence techniques that are used nowadays, the findings of this research may shed light on the selection of proper techniques for reliable energy performance analysis in complex buildings.

Mutual Coupling Reduction in Antenna Arrays Using Artificial Intelligence Approach and Inverse Neural Network Surrogates

This paper presents a novel approach to reducing undesirable coupling in antenna arrays using custom-designed resonators and inverse surrogate modeling. To illustrate the concept, two standard patch antenna cells with 0.07λ edge-to-edge distance were designed and fabricated to operate at 2.45 GHz. A stepped-impedance resonator was applied between the antennas to suppress their mutual coupling. For the first time, the optimum values of the resonator geometry parameters were obtained using the proposed inverse artificial neural network (ANN) model, constructed from the sampled EM-simulation data of the system, and trained using the particle swarm optimization (PSO) algorithm. The inverse ANN surrogate directly yields the optimum resonator dimensions based on the target values of its S-parameters being the input parameters of the model. The involvement of surrogate modeling also contributes to the acceleration of the design process, as the array does not need to undergo direct EM-driven optimization. The obtained results indicate a remarkable cancellation of the surface currents between two antennas at their operating frequency, which translates into isolation as high as -46.2 dB at 2.45 GHz, corresponding to over 37 dB improvement as compared to the conventional setup.

Differentiation of NaCl, NaOH, and β-Phenylethylamine Using Ultraviolet Spectroscopy and Improved Adaptive Artificial Bee Colony Combined with BP-ANN Algorithm

The aim of this study is to enhance the classification performance of the back-propagation-artificial neural network (BP-ANN) algorithm for NaCl, NaOH, β-phenylethylamine (PEA), and their mixture, as well as to avoid the defects of the artificial bee colony (ABC) algorithm such as prematurity and local optimization. In this paper, a method that combined an improved adaptive artificial bee colony (IAABC) algorithm and BP-ANN algorithm was proposed. This method improved the ABC algorithm by adding an adaptive local search factor and mutation factor; meanwhile, it can enhance the abilities of the global optimization and local search of the ABC algorithm and avoid prematurity. The extracted score vectors of the principal component of the ultraviolet (UV) spectrum were used as the input variable of the BP-ANN algorithm. The IAABC algorithm was used to optimize the weight and threshold of the BP-ANN algorithm, and the iterative algorithm was repeated until the output accuracy was reached. The output variable was the classification results of NaCl, NaOH, PEA, and the mixture. Meanwhile, the proposed IAABC-BP-ANN algorithm was compared with discriminant analysis (DA), sigmaid-support vector machine (SVM), radial basis function-SVM (RBF-SVM), BP-ANN, and ABC-BP-ANN. Then, the above algorithms were used to classify NaCl, NaOH, PEA, and the mixture, respectively. In the experiment, four indicators, accuracy, recall, precision, and F-score, were used as the evaluation criteria. In addition, the regression equation parameters of the mixture for the testing set were obtained by BP-ANN, ABC-BP-ANN, and IAABC-BP-ANN models. All of the results showed that IAABC-BP-ANN exhibits better performance than other algorithms. Therefore, IAABC-BP-ANN combined with UV spectroscopy is a potential identification tool for the detection of NaCl, NaOH, PEA, and the mixture.

Machine Learning-Based Accelerated Approaches to Infer Breakdown Pressure of Several Unconventional Rock Types

Unconventional oil and gas reservoirs are usually classified by extremely low porosity and permeability values. The most economical way to produce hydrocarbons from such reservoirs is by creating artificially induced channels. To effectively design hydraulic fracturing jobs, accurate values of rock breakdown pressure are needed. Conducting hydraulic fracturing experiments in the laboratory is a very expensive and time-consuming process. Therefore, in this study, different machine learning (ML) models were efficiently utilized to predict the breakdown pressure of tight rocks. In the first part of the study, to measure the breakdown pressures, a comprehensive hydraulic fracturing experimental study was conducted on various rock specimens. A total of 130 experiments were conducted on different rock types such as shales, sandstone, tight carbonates, and synthetic samples. Rock mechanical properties such as Young's modulus (E), Poisson's ratio (ν), unconfined compressive strength, and indirect tensile strength (σ_t) were measured before conducting hydraulic fracturing tests. ML models were used to correlate the breakdown pressure of the rock as a function of fracturing experimental conditions and rock properties. In the ML model, we considered experimental conditions, including the injection rate, overburden pressures, and fracturing fluid viscosity, and rock properties including Young's modulus (E), Poisson's ratio (ν), UCS, and indirect tensile strength (σ_t), porosity, permeability, and bulk density. ML models include artificial neural networks (ANNs), random forests, decision trees, and the K-nearest neighbor. During training of ML models, the model hyperparameters were optimized by the grid-search optimization approach. With the optimal setting of the ML models, the breakdown pressure of the unconventional formation was predicted with an accuracy of 95%. The accuracy of all ML techniques was quite similar; however, an explicit empirical correlation from the ANN technique is proposed. The empirical correlation is the function of all input features and can be used as a standalone package in any software. The proposed methodology to predict the breakdown pressure of unconventional rocks can minimize the laboratory experimental cost of measuring fracture parameters and can be used as a quick assessment tool to evaluate the development prospect of unconventional tight rocks.

Application of back propagation neural network model optimized by particle swarm algorithm in predicting the risk of hypertension

The structure of a back propagation neural network was optimized by a particle swarm optimization (PSO) algorithm, and a back propagation neural network model based on a PSO algorithm was constructed. By comparison with a general back propagation neural network and logistic regression, the fitting performance and prediction performance of the PSO algorithm is discussed. Furthermore, based on the back propagation neural network optimized by the PSO algorithm, the risk factors related to hypertension were further explored through the mean influence value algorithm to construct a risk prediction model. In the evaluation of the fitting effect, the root mean square error and coefficient of determination of the back propagation neural network based on the PSO algorithm were 0.09 and 0.29, respectively. In the comparison of prediction performance, the accuracy, sensitivity, specificity, and area under the receiver operating characteristic curve of the back propagation neural network based on PSO algorithm were 85.38%, 43.90%, 96.66%, and 0.86, respectively. The results showed that the backpropagation neural network optimized by PSO had the best fitting effect and prediction performance. Meanwhile, the mean impact value algorithm could screen out the risk factors related to hypertension and build a disease prediction model, which can provide clues for exploring the pathogenesis of hypertension and preventing hypertension.

Designing Artificial Neural Network Using Particle Swarm Optimization: A Survey

Neural network modeling has become a special interest for many engineers and scientists to be utilized in different types of data as time series, regression, and classification and have been used to solve complicated practical problems in different areas, such as medicine, engineering, manufacturing, military, business. To utilize a prediction model that is based upon artificial neural network (ANN), some challenges should be addressed that optimal designing and training of ANN are major ones. ANN can be defined as an optimization task because it has many hyper parameters and weights that can be optimized. Metaheuristic algorithms such as swarm intelligence-based methods are a category of optimization methods that aim to find an optimal structure of ANN and to train the network by optimizing the weights. One of the commonly used swarm intelligence-based algorithms is particle swarm optimization (PSO) that can be used for optimizing ANN. In this study, we review the conducted research works on optimizing the ANNs using PSO. All studies are reviewed from two different perspectives: optimization of weights and optimization of structure and hyper parameters.

Machine Learning Models for the Prediction of Energy Consumption Based on Cooling and Heating Loads in Internet-of-Things-Based Smart Buildings

In this article, the consumption of energy in Internet-of-things-based smart buildings is investigated. The main goal of this work is to predict cooling and heating loads as the parameters that impact the amount of energy consumption in smart buildings, some of which have the property of symmetry. For this purpose, it proposes novel machine learning models that were built by using the tri-layered neural network (TNN) and maximum relevance minimum redundancy (MRMR) algorithms. Each feature related to buildings was investigated in terms of skewness to determine whether their distributions are symmetric or asymmetric. The best features were determined as the essential parameters for energy consumption. The results of this study show that the properties of relative compactness and glazing area have the most impact on energy consumption in the buildings, while orientation and glazing area distribution are less correlated with the output variables. In addition, the best mean absolute error (MAE) was calculated as 0.28993 for heating load (kWh/m2) prediction and 0.53527 for cooling load (kWh/m2) prediction, respectively. The experimental results showed that our method outperformed the state-of-the-art methods on the same dataset.

Research on soft sensing method of photosynthetic bacteria fermentation process based on ant colony algorithm and least squares support vector machine

Photosynthetic bacteria wastewater treatment is an efficient water pollution treatment method, but photosynthetic bacteria fermentation is a multivariable, non-linear, and time-varying process. So it is difficult to establish an accurate model. Aiming at the difficulty of online measurement of key parameters, such as bacterial concentration and matrix concentration in photosynthetic bacteria fermentation process, an improved ant colony algorithm least squares support vector machine (AC-LSSVM) soft sensing model method is proposed in this paper. Firstly, the virtual sensing subsystem of the photosynthetic bacteria fermentation process is proposed, with measurable parameters as input and unmeasurable key parameters as output, and the left inverse soft sensing model of virtual sensing is constructed. Then, the ant colony algorithm can quickly find the shortest path to optimize the parameters of the traditional PI regulation, to improve the dynamic performance and accuracy of parameter measurement in the fermentation process. After that, the ant colony algorithm is used to optimize penalty parameters C and kernel parameters σ of LSSVM, which effectively avoids the local optimization and improves the computing power and global optimization ability. Finally, the soft sensing prediction model of the photosynthetic bacteria fermentation process based on AC-LSSVM is established. Compared with SVM and LSSVM prediction models, the root mean square error of bacterial concentration and matrix concentration based on the AC-LSSVM model are 0.468 and 0.126, respectively. The simulation analysis shows that this model has less error and better prediction ability, and it can meet the needs of online prediction of key parameters of photosynthetic bacteria fermentation.

A Novel Combination of PCA and Machine Learning Techniques to Select the Most Important Factors for Predicting Tunnel Construction Performance

Numerous studies have reported the effective use of artificial intelligence approaches, particularly artificial neural networks (ANNs)-based models, to tackle tunnelling issues. However, having a high number of model inputs increases the running time and related mistakes of ANNs. The principal component analysis (PCA) approach was used in this work to select input factors for predicting tunnel boring machine (TBM) performance, specifically advance rate (AR). A reliable and precise forecast of TBM AR is desirable and critical for mitigating risk throughout the tunnel building phase. The developed PCAs (a total of four PCAs) were used with the artificial bee colony (ABC) method to predict TBM AR. To assess the created PCA-ANN-ABC model’s capabilities, an imperialist competitive algorithm-ANN and regression-based methods for estimating TBM AR were also suggested. To evaluate the artificial intelligence and statistical models, many statistical evaluation metrics were evaluated and generated, including the coefficient of determination (R2). The findings indicate that the PCA-ANN-ABC model (with R2 values of 0.9641 for training and 0.9558 for testing) is capable of predicting AR values with a high degree of accuracy, precision, and flexibility. The modelling approach utilized in this study may be used to other comparable studies involving the solution of engineering challenges.

Prediction of Whole Social Electricity Consumption in Jiangsu Province Based on Metabolic FGM (1, 1) Model

The achievement of the carbon peaking and carbon neutrality targets requires the adjustment of the energy structure, in which the dual-carbon progress of the power industry will directly affect the realization process of the goal. In such terms, an accurate demand forecast is imperative for the government and enterprises’ decision makers to develop an optimal strategy for electric energy planning work in advance. According to the data of the whole social electricity consumption in Jiangsu Province of China from 2015 to 2019, this paper uses the improved particle swarm optimization algorithm to calculate the fractional-order r of the FGM (1, 1) model and establishes a metabolic FGM (1, 1) model to predict the whole social electricity consumption in Jiangsu Province of China from 2020 to 2023. The results show that in the next few years the whole social electricity consumption in Jiangsu Province will show a growth trend, but the growth rate will slow down generally. It can be seen that the prediction accuracy of the metabolic FGM (1, 1) model is higher than that of the GM (1, 1) and FGM (1, 1) models. In addition, the paper analyzes the reasons for the changes in the whole society electricity consumption in Jiangsu Province of China and provides support for government decision making.

Machine Learning Model for Monitoring Rheological Properties of Synthetic Oil-Based Mud

The drilling fluid rheology is a critical parameter during the oil and gas drilling operation to achieve optimum drilling performance without nonproductive time or extra remedial operation cost. The close monitoring for rheological properties will help the drilling fluid crew to take quick actions to maintain the designed profiles for the drilling fluid rheology, especially when it comes to the flat rheology drilling fluid system, which is a new generation for harsh and specific drilling conditions that require flat profiles for the mud rheology regarding the temperature condition changes. The current study introduces a machine learning application toward predicting the rheology of synthetic oil-based mud (flat rheology type) for the full automation system of monitoring the mud rheological properties. Four models are developed, for the first time, to determine the rheological characteristics of flat rheology synthetic oil-based system using artificial neural networks. The developed models are capable of predicting the plastic and apparent viscosities, yield point, and flow behavior index from only the mud density and Marsh funnel as model inputs. The proposed models were trained and optimized from a real field dataset (369 measurements) with further testing the models using an unseen dataset of 153 data points. The predicted rheological properties achieved a high degree of accuracy versus the actual measurements and showed a coefficient of correlation range from 0.91 to 0.97 with an average absolute percentage error of less than 9.66% during the training and testing phases. Besides, machine learning-based correlations are proposed for estimating the rheological properties on the rig site without running the machine learning system for easy field applications.

Modeling of Textile Dye Removal from Wastewater Using Innovative Oxidation Technologies (Fe(II)/Chlorine and H2O2/Periodate Processes): Artificial Neural Network-Particle Swarm Optimization Hybrid Model

An efficient optimization technique based on a metaheuristic and an artificial neural network (ANN) algorithm has been devised. Particle swarm optimization (PSO) and ANN were used to estimate the removal of two textile dyes from wastewater (reactive green 12, RG12, and toluidine blue, TB) using two unique oxidation processes: Fe(II)/chlorine and H₂O₂/periodate. A previous study has revealed that operating conditions substantially influence removal efficiency. Data points were gathered for the experimental studies that developed our ANN-PSO model. The PSO was used to determine the optimum ANN parameter values. Based on the two processes tested (Fe(II)/chlorine and H₂O₂/periodate), the proposed hybrid model (ANN-PSO) has been demonstrated to be the most successful in terms of establishing the optimal ANN parameters and brilliantly forecasting data for RG12 and TP elimination yield with the coefficient of determination (R2) topped 0.99 for three distinct ratio data sets.

Modeling of Land Use and Land Cover (LULC) Change Based on Artificial Neural Networks for the Chapecó River Ecological Corridor, Santa Catarina/Brazil

The simulation and analysis of future land use and land cover—LULC scenarios using artificial neural networks (ANN)—has been applied in the last 25 years, producing information for environmental and territorial policy making and implementation. LULC changes have impacts on many levels, e.g., climate change, biodiversity and ecosystem services, soil quality, which, in turn, have implications for the landscape. Therefore, it is fundamental that planning is informed by scientific evidence. The objective of this work was to develop a geographic model to identify the main patterns of LULC transitions between the years 2000 and 2018, to simulate a baseline scenario for the year 2036, and to assess the effectiveness of the Chapecó River ecological corridor (an area created by State Decree No. 2.957/2010), regarding the recovery and conservation of forest remnants and natural fields. The results indicate that the forest remnants have tended to recover their area, systematically replacing silviculture areas. However, natural fields (grassland) are expected to disappear in the near future if proper measures are not taken to protect this ecosystem. If the current agricultural advance pattern is maintained, only 0.5% of natural fields will remain in the ecological corridor by 2036. This LULC trend exposes the low effectiveness of the ecological corridor (EC) in protecting and restoring this vital ecosystem.

Understanding Sustainable Energy in the Context of Smart Cities: A PRISMA Review

In the context of smart cities, sustainability is an essential dimension. One of the ways to achieve sustainability and reduce the emission of greenhouse gases in smart cities is through the promotion of sustainable energy. The demand for affordable and reliable electrical energy requires different energy sources, where the cost of production often outweighs the environmental factor. This paper aims to investigate the ways smart cities promote sustainability in the electricity sector. For this, a systematic literature review using the PRISMA protocol was employed as the methodological approach. In this review, 154 journal articles were thoroughly analyzed. The results were grouped according to the themes and categorized into energy efficiency, renewable energies, and energy and urban planning. The study findings revealed the following: (a) global academic publication landscape for smart city and energy sustainability research; (b) unbalanced publications when critically evaluating geographical continents’ energy use intensity vs. smart cities’ energy sustainability research outcomes; (c) there is a heavy concentration on the technology dimension of energy sustainability and efficiency, and renewables topics in the literature, but much less attention is paid to the energy and urban planning issues. The insights generated inform urban and energy authorities and provide scholars with directions for prospective research.

Service Oriented R-ANN Knowledge Model for Social Internet of Things

Increase in technologies around the world requires adding intelligence to the objects, and making it a smart object in an environment leads to the Social Internet of Things (SIoT). These social objects are uniquely identifiable, transferable and share information from user-to-objects and objects-to objects through interactions in a smart environment such as smart homes, smart cities and many more applications. SIoT faces certain challenges such as handling of heterogeneous objects, selection of generated data in objects, missing values in data. Therefore, the discovery and communication of meaningful patterns in data are more important for every application. Thus, the analysis of data is essential in smarter decisions and qualifies performance of data for various applications. In a smart environment, social networks of intelligent objects are increasing services and decreasing the relationship in a reliable and efficient way of sharing resources and services. Hence, this work proposed the feature selection method based on proposed semantic rules and established the relationships to classify the services using relationship artificial neural networks (R-ANN). R-ANN is an inversely proportional relationship to the objects based on certain rules and conditions between the objects to objects and users to objects. It provides the service oriented knowledge model to make decisions in the proposed R-ANN model that produces service to the users. The proposed R-ANN provides an accuracy of 89.62% for various services namely weather, air quality, parking, light status, and people presence respectively in the SIoT environment compared to the existing model.

Deep learning-based optimization of a microfluidic membraneless fuel cell for maximum power density via data-driven three-dimensional multiphysics simulation

A deep learning-based method for optimizing a membraneless microfluidic fuel cell (MMFC)performance by combining the artificial neural network (ANN) and genetic algorithm (GA) was for the first time introduced. A three-dimensional multiphysics model that had an accuracy equivalent to experimental results (R² = 0.976) was employed to generate the ANN's training data. The constructed ANN is equivalent to the simulation (R² = 0.999) but with far better computation resource efficiency as the ANN's execution time is only 0.041 s. The ANN model is then used by the GA to determine the inputs (microchannel length = 10.040 mm, width = 0.501 mm, height = 0.635 mm; temperature = 288.210 K, cell voltage = 0.309 V) that lead to the maximum power density of 0.263 mWcm^-2 (current density of 0.852 mAcm^-2) of the MMFC. The ANN-GA and numerically calculated maximum power densities differed only by 0.766%.

The use of statistical and machine learning tools to accurately quantify the energy performance of residential buildings

Prediction of building energy consumption is key to achieving energy efficiency and sustainability. Nowadays, the analysis or prediction of building energy consumption using building energy simulation tools facilitates the design and operation of energy-efficient buildings. The collection and generation of building data are essential components of machine learning models; however, there is still a lack of such data covering certain weather conditions. Such as those related to arid climate areas. This paper fills this identified gap with the creation of a new dataset for energy consumption of 3,840 records of typical residential buildings of the Saudi Arabia region of Qassim, and investigates the impact of residential buildings' eight input variables (Building Size, Floor Height, Glazing Area, Wall Area, window to wall ratio (WWR), Win Glazing U-value, Roof U-value, and External Wall U-value) on the heating load (HL) and cooling load (CL) output variables. A number of classical and non-parametric statistical tools are used to uncover the most strongly associated input variables with each one of the output variables. Then, the machine learning Multiple linear regression (MLR) and Multilayer perceptron (MLP) methods are used to estimate HL and CL, and their results compared using the Mean Absolute Error (MAE), the Root Mean Square Error (RMSE), and coefficient of determination (R²) performance measures. The use of the IES simulation software on the new dataset concludes that MLP accurately estimates both HL and CL with low MAE, RMSE, and R², which evidences the feasibility and accuracy of applying machine learning methods to estimate building energy consumption.

Prediction of Arsenic Removal from Contaminated Water Using Artificial Neural Network Model

Arsenic is a deleterious heavy metal that is usually removed from polluted water based on adsorption processes. The latest mode of modeling such a process is to implement artificial intelligence (AI). In the current work, a new artificial neural network (ANN) model was developed to predict the adsorption efficiency of arsenate (As(III)) from contaminated water by analyzing different architectures of an adaptive network-based fuzzy inference system (ANFIS). The database for the current study consisted of the experimental data of the adsorption of As(III) by different adsorbents/biosorbents. The data were randomly divided into two sets: 70% for the training phase and 30% for the testing phase. Four statistical evaluation metrics, namely, mean square error (MSE), root-mean-square error (RMSE), Pearson’s correlation coefficient (R%), and the determination coefficient (R2) were used for the analysis. The best performing ANFIS model was characterized with the average values of 97.72%, 0.9333, 0.137, and 0.274 of R%, R2, MSE, and RMSE, respectively. In addition, a parametric investigation revealed that the most dominating parameters on the adsorption process efficiency were in the following order: pH, As initial concentration, contact time, adsorbent dosage, inoculum size, and temperature. The results of the current study would be useful in the adsorption process scale-up and optimization.

An Assessment Framework for the Transformation of Mobility 4.0 in Smart Cities

Investing in digital transformation turns out to be a strategic action to tackle contemporary issues and to improve competitiveness for enterprises. The high variability of options in the digital transformation process enforces a higher complexity level in configuring and setting up objectives and goals based on cities’ needs; hence, a systematic approach is required to assist decision makers for better and sustainable transformation. A reference model is described in this paper to support decision makers with comprehensive assessment data for digital transformation cities transport. The proposed reference model assesses the cities based on digital transformation of transport services to assist policy makers for better decisions in transforming the Mobility 4.0. The proposed model in this study functions as a knowledge-based systematic framework for assessing the capabilities of the cities, diagnosing their needs under given circumstances and identifying the best fitting workflow for digital transformation of urban transportation systems and related services. The reference model takes on board a group of smart city indices with respective assessment criteria in determining a smartness level of transportation components. A conceptual 4-tier smartness scale has been proposed to establish a consistent assessment subject to cities circumstances in many respects. The reference model has been formalised into a mathematical model to characterise the assessments. The mathematical model encompasses strategic assessments by experts to identify priorities of investments in the digitalization process, which are aligned with strategic goals and policies of cities’ management.

Predictive analysis of the value of information flow on the shop floor of developing countries using artificial neural network based deep learning

To facilitate the continuous improvement of performance and the management of information flow (MIF) for production and manufacturing purposes on the shop floor of developing countries, there is a need to characterize information flow that will be shared during the process. MIF provides a key performance shop floor metric called the value of information flow (VIF). Previous methods have been used to analyze VIF in developed countries. However, these methods are sometimes limited when applied to developing countries where the shop floor is disorganized. It then renders the MIF with the imported software inefficient because of the gap between the user environments. Taking Cameroon as a case study, this study proposes a new method of modeling and analyzing the information flow and its value based on the characteristics of information flow (CIF) for developing countries. In addition, a predictive analysis of the VIF based on CIF using an artificial neural network (ANN) on one hand and optimized ANN with particle swarm optimizer (PSO) and genetic algorithms (GA) on the other is performed. The ANN model of regression developed has the following performance: coefficient of determination: 0.99 and mean squared error (MSE): 0.00043. For the PSO-ANN, the MSE decreased to 0.00011, and this model result was similar to that of the deep learning model used for regression. The GA-ANN model results were not as satisfactory as those of the PSO-ANN model. A predictive system to analyze VIF is proposed for managers of companies in developing countries.

Synthesizing Multi-Layer Perceptron Network with Ant Lion Biogeography-Based Dragonfly Algorithm Evolutionary Strategy Invasive Weed and League Champion Optimization Hybrid Algorithms in Predicting Heating Load in Residential Buildings

The significance of accurate heating load (HL) approximation is the primary motivation of this research to distinguish the most efficient predictive model among several neural-metaheuristic models. The proposed models are formulated through synthesizing a multi-layer perceptron network (MLP) with ant lion optimization (ALO), biogeography-based optimization (BBO), the dragonfly algorithm (DA), evolutionary strategy (ES), invasive weed optimization (IWO), and league champion optimization (LCA) hybrid algorithms. Each ensemble is optimized in terms of the operating population. Accordingly, the ALO-MLP, BBO-MLP, DA-MLP, ES-MLP, IWO-MLP, and LCA-MLP presented their best performance for population sizes of 350, 400, 200, 500, 50, and 300, respectively. The comparison was carried out by implementing a ranking system. Based on the obtained overall scores (OSs), the BBO (OS = 36) featured as the most capable optimization technique, followed by ALO (OS = 27) and ES (OS = 20). Due to the efficient performance of these algorithms, the corresponding MLPs can be promising substitutes for traditional methods used for HL analysis.

Prediction Performance Analysis of Artificial Neural Network Model by Input Variable Combination for Residential Heating Loads

In Korea apartment buildings, most energy is consumed as heating energy. In order to reduce heating energy in apartment buildings, it is required to reduce the amount of energy used in heating systems. Energy saving in heating systems can be achieved through operation and control based on efficient operation plans. The efficient operation plan of the heating system should be based on the predicted heating load. Thus, various methods have been developed for predicting heating loads. Recently, artificial intelligence techniques (e.g., ANN: artificial neural network) have been used to predict heating loads. The process for determination of input data variables is necessary to obtain the accuracy of predicted results using an ANN model. However, there is a lack of studies to evaluate the accuracy level of the predicted results caused by the selection and combination of input variables. There is a need to evaluate the performance of an ANN model for prediction of residential heating loads. Therefore, the purpose of this study is, for a residential building, to evaluate the accuracy levels of predicted heating loads using an ANN model with various combinations of input variables. To achieve the study purpose, each case was classified according to the combination of the input variables and the prediction results were analyzed. Through this, the worst, mean, and best were selected according to the predicted performance. In addition, an actual case was selected consisting of variables that can be measured in an actual building. The derived cv(RMSE) of each case resulted in a percentage value of 38.2% for the worst, 7.3% for the mean, 3.0% for the best, and 5.4% for the actual. The largest difference between the best and worst resulted in 33.2%, and thus the precision of the predicted heating loads was highly affected by the selection and combination of the input variables used for the ANN model.

Prediction Models for Evaluating the Strength of Cemented Paste Backfill: A Comparative Study

Cemented paste backfill (CPB) is widely used in underground mining, and attracts more attention these years as it can reduce mining waste and avoid environmental pollution. Normally, to evaluate the functionality of CPB, the compressive strength (UCS) is necessary work, which is also time and money consuming. To address this issue, seven machine learning models were applied and evaluated in this study, in order to predict the UCS of CPB. In the laboratory, a series of tests were performed, and the dataset was constructed considering five key influencing variables, such as the tailings to cement ratio, curing time, solids to cement ratio, fine sand percentage and cement types. The results show that different variables have various effects on the strength of CPB. The optimum models for predicting the UCS of CPB are a support vector machine (SVM), decision tree (DT), random forest (RF) and back-propagation neural network (BPNN), which means that these models can be directly applied for UCS prediction in future work. Furthermore, the intelligent model reveals that the tailings to cement ratio has the most important influence on the strength of CPB. This research can boost CPB application in the field, and guide the artificial intelligence application in future mining.

Forecasting the Heat Load of Residential Buildings with Heat Metering Based on CEEMDAN-SVR

The energy demand of the district heating system (DHS) occupies an important part in urban energy consumption, which has a great impact on the energy security and environmental protection of a city. With the gradual improvement of people’s economic conditions, different groups of people now have different demands for thermal energy for their comfort. Hence, heat metering has emerged as an imperative for billing purposes and sustainable management of energy consumption. Therefore, forecasting the heat load of buildings with heat metering on the demand side is an important management strategy for DHSs to meet end-users’ needs and maintain energy-saving regulations and safe operation. However, the non-linear and non-stationary characteristics of buildings’ heat load make it difficult to predict consumption patterns accurately, thereby limiting the capacity of the DHS to deliver on its statutory functions satisfactorily. A novel ensemble prediction model is proposed to resolve this problem, which integrates the advantages of Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and support vector regression (SVR), called CEEMDAN-SVR in this paper. The proposed CEEMDAN-SVR algorithm is designed to automatically decompose the intrinsic mode according to the characteristics of heat load data to ensure an accurate representation of heat load patterns on multiple time scales. It will also be useful for developing an accurate prediction model for the buildings’ heat load. In formulating the CEEMDAN-SVR model, the heat load data of three different buildings in Xingtai City were acquired during the heating season of 2019–2020 and employed to conduct detailed comparative analysis with modern algorithms, such as extreme tree regression (ETR), forest tree regression (FTR), gradient boosting regression (GBR), support vector regression (SVR, with linear, poly, radial basis function (RBF) kernel), multi-layer perception (MLP) and EMD-SVR. Experimental results reveal that the performance of the proposed CEEMDAN-SVR model is better than the existing modern algorithms and it is, therefore, more suitable for modeling heat load forecasting.

Different sampling strategies for predicting landslide susceptibilities are deemed less consequential with deep learning

Predictive capability of landslide susceptibilities is assumed to be varied with different sampling techniques, such as (a) the landslide scarp centroid, (b) centroid of landslide body, (c) samples of the scrap region representing the scarp polygon, and (d) samples of the landslide body representing the entire landslide body. However, new advancements in statistical and machine learning algorithms continuously being updated the landslide susceptibility paradigm. This paper explores the predictive performance power of different sampling techniques in landslide susceptibility mapping in the wake of increased usage of artificial intelligence. We used logistic regression (LR), neural network (NNET), and deep learning neural network (DNN) model for testing and validation of the models. The tests were applied to the 2018 Hokkaido Earthquake affected areas using a set of 11 predictor variables (seismic, topographic, and hydrological). We found that the prediction rates are inconsequential with the DNN model irrespective of the sampling technique (AUC: 0.904 - 0.919). Whereas, testing with LR (AUC: 0.825 - 0.785) and NNET (AUC: 0.882 - 0.858) produces larger differences in the accuracies between the four datasets. Nonetheless, the highest success rates were obtained for samples within the landslide scarp area. The analogy was then validated with a published landslide inventory from the 2015 Gorkha earthquake. We, therefore, suggest that DNN models as an appropriate technique to increase the predictive performance of landslide susceptibilities if the landslide scarp and body are not characterized properly in an inventory.

Models for Short-Term Wind Power Forecasting Based on Improved Artificial Neural Network Using Particle Swarm Optimization and Genetic Algorithms

As sources of conventional energy are alarmingly being depleted, leveraging renewable energy sources, especially wind power, has been increasingly important in the electricity market to meet growing global demands for energy. However, the uncertainty in weather factors can cause large errors in wind power forecasts, raising the cost of power reservation in the power system and significantly impacting ancillary services in the electricity market. In pursuance of a higher accuracy level in wind power forecasting, this paper proposes a double-optimization approach to developing a tool for forecasting wind power generation output in the short term, using two novel models that combine an artificial neural network with the particle swarm optimization algorithm and genetic algorithm. In these models, a first particle swarm optimization algorithm is used to adjust the neural network parameters to improve accuracy. Next, the genetic algorithm or another particle swarm optimization is applied to adjust the parameters of the first particle swarm optimization algorithm to enhance the accuracy of the forecasting results. The models were tested with actual data collected from the Tuy Phong wind power plant in Binh Thuan Province, Vietnam. The testing showed improved accuracy and that this model can be widely implemented at other wind farms.

Performance Evaluation of Two Machine Learning Techniques in Heating and Cooling Loads Forecasting of Residential Buildings

Nowadays, since energy management of buildings contributes to the operation cost, many efforts are made to optimize the energy consumption of buildings. In addition, the most consumed energy in the buildings is assigned to the indoor heating and cooling comforts. In this regard, this paper proposes a heating and cooling load forecasting methodology, which by taking this methodology into the account energy consumption of the buildings can be optimized. Multilayer perceptron (MLP) and support vector regression (SVR) for the heating and cooling load forecasting of residential buildings are employed. MLP and SVR are the applications of artificial neural networks and machine learning, respectively. These methods commonly are used for modeling and regression and produce a linear mapping between input and output variables. Proposed methods are taught using training data pertaining to the characteristics of each sample in the dataset. To apply the proposed methods, a simulated dataset will be used, in which the technical parameters of the building are used as input variables and heating and cooling loads are selected as output variables for each network. Finally, the simulation and numerical results illustrates the effectiveness of the proposed methodologies.

Contributions and Risks of Artificial Intelligence (AI) in Building Smarter Cities: Insights from a Systematic Review of the Literature

Artificial intelligence (AI) is one of the most disruptive technologies of our time. Interest in the use of AI for urban innovation continues to grow. Particularly, the rise of smart cities—urban locations that are enabled by community, technology, and policy to deliver productivity, innovation, livability, wellbeing, sustainability, accessibility, good governance, and good planning—has increased the demand for AI-enabled innovations. There is, nevertheless, no scholarly work that provides a comprehensive review on the topic. This paper generates insights into how AI can contribute to the development of smarter cities. A systematic review of the literature is selected as the methodologic approach. Results are categorized under the main smart city development dimensions, i.e., economy, society, environment, and governance. The findings of the systematic review containing 93 articles disclose that: (a) AI in the context of smart cities is an emerging field of research and practice. (b) The central focus of the literature is on AI technologies, algorithms, and their current and prospective applications. (c) AI applications in the context of smart cities mainly concentrate on business efficiency, data analytics, education, energy, environmental sustainability, health, land use, security, transport, and urban management areas. (d) There is limited scholarly research investigating the risks of wider AI utilization. (e) Upcoming disruptions of AI in cities and societies have not been adequately examined. Current and potential contributions of AI to the development of smarter cities are outlined in this paper to inform scholars of prospective areas for further research.

Developing Hybrid Machine Learning Models for Estimating the Unconfined Compressive Strength of Jet Grouting Composite: A Comparative Study

Coal-grout composites were fabricated in this study using the jet grouting (JG) technique to enhance coal mass in underground conditions. To evaluate the mechanical properties of the created coal-grout composite, its unconfined compressive strength (UCS) needed to be tested. A mathematical model is required to elucidate the unknown nonlinear relationship between the UCS and the influencing variables. In this study, six computational intelligence techniques using machine learning (ML) algorithms were used to develop the mathematical models, which includes back-propagation neural network (BPNN), random forest (RF), decision tree (DT), support vector machine (SVM), k-nearest neighbors (KNN), and logistic regression (LR). In addition, the hyper-parameters in these typical algorithms (e.g., the hidden layers in BPNN, the gamma in SVM, and the number of neighbor samples in KNN) were tuned by the recently developed beetle antennae search algorithm (BAS). To prepare the dataset for these ML models, three types of cementitious grout and three types of chemical grout were mixed with coal powders extracted from the Guobei coalmine, Anhui Province, China to create coal-grout composites. In total, 405 coal-grout specimens in total were extracted and tested. Several variables such as grout types, coal-grout ratio, and curing time were chosen as input parameters, while UCS was the output of these models. The results show that coal-chemical grout composites had higher strength in the short-term, while the coal-cementitious grout composites could achieve stable and high strength in the long term. BPNN, DT, and SVM outperform the others in terms of predicting the UCS of the coal-grout composites. The outstanding performance of the optimum ML algorithms for strength prediction facilitates JG parameter design in practice and could be the benchmark for the wider application of ML methods in JG engineering for coal improvement.